Used Primus for sale (68)

Condition: good (used), functionality: fully functional, used fat fryer Habersang Primus 5/E Automatik, checked and tested, inner dimensions 185 cm wide, 70 cm deep, for about 96 pastries, Siemens S590U control, serial no. 84710/001150, 9 kW, 380 V, 50 Hz Itsdpfxox Dx Aio Abvjd

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Iedsx Eg T Ejpfx Abvstd

Condition: excellent (used), Year of construction: 2011, Weiler Primus VC precision lathe Year of manufacture: 2011 Technical details Turning diameter: 250 mm Turning length: 500 mm Center height: 140 mm Swing diameter over bed slide: 280 mm Max. swing diameter over cross slide: 150 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power 4.0 kW Iodpfow Ebdbex Abvetd Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Travel distances: X-travel Cross slide travel: 150 mm Z-travel by cross slide: 500 mm Z-travel by top slide: 110 mm Total power requirement: 15 kVA Machine weight: approx. 800 kgs Space requirements: 1400x935x1550 mm Accessories/options: - Documentations - 3-jaw chuck diameter 160mm, with jaws - 4-jaw chuck diameter 160mm, with jaws - Collet type chuck with collets - Tailstock - Multifix tool holder, with holders - Steady - Change gears - Different kind of tooling - Lista cabinet - Spare parts - etc... Under power in our warehouse.

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm centre height ca. 125 mm turning speed range 80 - 3000 U/min number of speeds 18 spindle bore 24 mm tailstock quill taper MT 3 weight ca. 400 kg dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; collet chuck device incl. collets 1-20 mm with 1 mm gradient Multifix size A with 3 interchangeable holders; chuck protection with shutdown Ijdpfx Abowa Dz Eovjtd

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Iedpfxsv D Ip Ns Abvotd Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps Iedpfxou Aftgo Abvotd >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm Ijdpfx Asvtp Edjbvotd >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: Iedpfx Abevivmyjvetd >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Year of construction: 1986, condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Iodpfxjn Ard De Abvetd

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, film width: 422 mm, machine/vehicle number: 860, TECHNICAL DETAILS Number of punches: 3 Film width: 422 mm Maximum depth: 110 mm Tool: 4-part tool (245 x 175 mm) MACHINE DETAILS Electrical data Mains voltage: 230/400 V Frequency: 50 Hz Rated current: 25 A Isdpfx Ajxruc Ijbvstd Rated power: 16 kW EQUIPMENT Thermoforming for rigid subfilm Rolls for plastic waste Gas mixer

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm Itodpfx Astq Takjbvod - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Condition: excellent (used), WEILER PRIMUS Type MD-G - Centre height: 125 mm - Centre distance: 400 mm - Speed range: 40-3000 rpm - Spindle bore: 24 mm - Electric chuck guard Itjdpfxoxw H Dbj Abvsd - Multifix with tool holders - Tailstock with drill quill - Four-jaw chuck - Work lamp - Bed stop - Documentation Dimensions: LxWxH 1.3x0.8x1.6 meters / Weight: 450 kg Errors and omissions excepted.

Condition: used, Year of construction: 1999, turning diameter 150 mm turning length 500 mm total power requirement 4 kW Iodpfx Asvm Dv Djbvstd weight of the machine ca. 0,8 t

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 230 V, Bread slicer Treif Primus Fusion - Bread slicing machine Treif Maschinenbau GmbH - Under counter bread slicer - Model: Primus fusion - bread cutting machine - Cutting width adjustable from 5 to 14mm Iedpfx Abevbc Hkovjtd - 220- 230 V - Year of construction 2020 - Machine weight: 230 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 864, center height: 140 mm, center width: 500 mm, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Digital display: Available Control: Siemens Sicomp IMC 05 Center height: 140 mm Center distance: 500 mm Clamping system Three-jaw chuck: Available Quick-change toolholder: Available Tailstock Type: Available Further information according to manufacturer - without guarantee Center distance: 500 mm Center height: 140 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 150 mm Main spindle Ijdov N Inispfx Abvetd Spindle head according to DIN ISO 702-3: Size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Inner taper depth of the main spindle: 50 mm Main drive Drive power (100% duty cycle): 4 kW Speed range: 30 - 4,000 rpm Number of Gears: 1 Number of speeds: continuously variable Feed drive Number of feeds: 24 Feed range longitudinal/transverse: 0.02 - 0.63 mm/rev / 0.006 - 0.2 mm/rev Threading range Metric threads: 0.25 - 8 mm Inch threads: 80 - 2 TPI Tailstock Quill diameter: 40 mm Quill stroke: 85 mm Quill taper mount: MT 3 Machine dimensions Length x width x height: 1,570 x 890 x 1,700 mm Weight: 1,050 kg

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1602, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS No information available Further information according to the manufacturer - without guarantee X-axis: 700 mm Y-axis: 1,000 mm Z-axis: 700 mm MPe (X-axis): from 1.3 + L / 300 µm Itedewhdr Tjpfx Abved MPEp (Y-axis): from 1.3 µm Mounting holes: M10 in 200x200 grid

Condition: good (used), Surface grinding machine GEIBEL & HOTZ FS 40 Primus SA, No. 920287, clamping surface 400 x 200 mm Isdpfx Abounw Ilsvetd

Condition: excellent (used), Parallel Lathe WEILER type PRIMUS Between points: 400 mm Maxi Ø on bench: 250 mm Maxi Ø over saddle: 130 mm Spindle Ø 24 mm Turret Multifix type A 3-jaws chuck Ø 155 mm Threadings Metric + Whitworth Tailstock CM2 Itjdpfoxnp I Dox Abvsd Scale HEIDENHAIN ND522 Feeds: auto 2 axes New electrical panel Delivered with: 1 4-jaws chuck Ø 155 mm, 4 tool holders, 1 drill chuck Voltage: 380 V Dimensions (L x W x H): 1300 x 900 x 1900 mm Weight: approx 500 kg Machine in VERY GOOD CONDITION

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Itedpfx Abedx R Dtevod Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 9123, Year of construction: 2008, massive, rigid milling machine for large posts with a milling cutter that can be adjusted steplessly vertically manual feed 2.2 kW 400V motor 2,800 rpm milling cutter speed maximum milling cutter diameter 300mm profile mounted at an angle of 20°-90°-20° (according to the scale) Itedpfx Abjwhpk Iovod maximum cut-out width 400mm (at an angle of 90°) maximum cut-out depth 110mm maximum profile height 190mm stepless milling height adjustment (handwheel and scale), adjustment range 0 - 100mm quick cutter change system pneumatic material clamping cooling and lubrication system

Condition: like new (used), Year of construction: 2019, operating hours: 9,710 h, functionality: fully functional, For sale: Intermac Primus 322 waterjet cutting machine. The machine was purchased new in September 2019. Isdpevpuvgofx Abvstd Main drive Number of heads: 2 (each with 3 axes) Table External length: 3210 mm External width: 5410 mm Height adjustment: 2150 mm Equipped with robust Intermac Primus OS control unit (Win 10 Enterprise 2016) and a high-pressure capacity of 3800 bar. The machine comes with a water purifier with a capacity of 600L/hour and a 1000L tank. Machine has 9710 production hours (utilization: 12%). The machine has been regularly and properly serviced, with invoices for spare parts available. The reverse osmosis system (purifier) has also been regularly serviced by an authorized service provider/seller—twice a year. Ideal for precision cutting with a working area of 3210 x 2000 mm. Total price (machine + purifier): €60,000 net EXW Cerna, Croatia.

Condition: used, Year of construction: 2019, functionality: limited functionality, machine/vehicle number: 1000033397, Pre-owned Primus 402 Waterjet 5 Axis with one cutting head, has served us for 4 years cutting stone and ceramic benchtops, delivers great cutting capabilities across a wide range of materials, including stone, ceramic, metals, glass, and more. Key Features: - Pioneer Technology: Maximum programming flexibility thanks to the free movement of the cutting head. The 5-axis cutting head is fitted with the patented Intermac infinite rotating C axis system for making top-quality tilted cuts (+/-60°) on complex profiles, with no limits. - Versatile Performance: Primus offers the possibility to process a wide selection of materials such as: natural stone, sintered materials, ceramic, metal, glass, and more. - User-Friendly Interface: Equipped with iCam Software making it easy to program and operate, even for intricate projects. Condition: Itedoytlb Sjpfx Abvjd - The machine was installed in September 2019 and decommissioned in September 2023. It was running well at the time of decommissioning, with only inaccuracy when cutting circles. Some maintenance may be required to restore it to peak performance, but it remains in good working condition and ready for immediate use in your factory. - The machine’s Probe and Head Rotation Calibration devices may need maintenance or replacement. These features were not critical to our operations and, therefore, were never used. - Decommissioning was carried out by a highly respected and professional Machine Technician in New Zealand, who can also commission the machine installation at your facility. Contact details can be provided upon request. - EXW from Auckland, New Zealand. This is a fantastic opportunity to own a high-performing waterjet at a fraction of the cost of a new model. Contact us today to learn more.

Condition: used, Primultini surface planer with 400mm worktable, used Isdpfxoq R Af Aj Abvstd

Condition: used, Primultini cast iron band saw with 100 cm flywheel and tilting table, maximum useful board passage 90 cm. 10 HP motor power. Used. Ijdotq Dl Tspfx Abvotd

Condition: used, RESAW PRIMULTINI 1100 RE perfect conditions Isdpfxst Dm Awo Abvetd