Used Prinect Prepress Interface for sale (3,625)

Condition: used, This listing is for a Sartorius MSA124S Balance The unit is in full working condition and is ready for immediate release. The MSA124S is part of the Sartorius “Cubis” series of analytical balances, which are modular, high-performance instruments designed for milligram-level weighing. Very fine resolution / readability: it supports a readability of 0.1 mg (0.0001 g) in many configurations. Weighing capacity: around 120 g (for the “124” model) in the typical configuration. Excellent repeatability and linearity: e.g., repeatability ≤ ±0.1 mg, linearity ≤ ±0.2 mg. High-end interface and connectivity: E.g., Ethernet, USB, RS-232, optional Bluetooth; also SD-card reader for data transfer. Advanced ergonomic features: tiltable and removable display/control unit, motorised draft shield (in certain variants) to minimise environmental influences. Compliant with GLP/GMP/laboratory traceability requirements: audit trails, user profiles, leveling assistance etc in higher-end configurations Crsdpfoxuqmnjx Ac Nob Because of its high precision and fine resolution, the MSA124S is best suited for: Analytical laboratories performing gravimetric measurements, chemical/ pharmaceutical labs, material science labs. Applications where small sample masses must be weighed accurately (e.g., formulations, dosing, microparticles). Environments requiring audit-trail/logging, connectivity, and data export (e.g., regulated labs). Use cases where drift/offset must be minimised and environmental effects (drafts, vibrations, static) must be managed.

Condition: excellent (used), Weiss Technik SaltEvent Type: SaltEvent SC/UKWT 1500 Operating hours: approx. 11,889 h Year of manufacture: 2022 Recirculating Air Corrosion Change Test Chamber / Salt Spray Test Chamber For sale is a high-quality Weiss Technik SaltEvent SC/UKWT 1500 suitable for corrosion, salt spray, condensation water, and climate change testing applications. The unit is ideal for use in industry, research, development, and quality assurance. Codpfx Asy Hkg Iec Nerb Technical Data: Manufacturer: Weiss Technik GmbH Type: SaltEvent SC/UKWT 1500, with ring flushing line Year of manufacture: 2022 Test chamber volume: approx. 1,450 liters Temperature / Climate Data: Temperature range (climatic test): +23°C to +70°C Humidity range: 20% to 98% r.h. Dew point range: +12°C to +69°C Salt spray test: ambient temperature +5 K to +50°C Condensation water test: ambient temperature +5 K to +42°C Electrical Data: Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: 9.8 kW Rated current: 18 A Refrigerant as per nameplate: R134a – 1.30 kg – GWP 1430 CO2 equivalent: 1.86 t LP max.: 17 bar g HP max.: 25 bar g Media Connections: Compressed air / GN2: max. 12 bar Deionized water: min. 3 bar / max. 5 bar Water connection for ring flushing line: max. 6 bar Condensate drain available Exhaust air connection available Power supply: 3/N/PE 400 V / 50 Hz Dimensions (according to drawing): External dimensions: approx. 3710 x 1537 x 1769 mm Test chamber length: approx. 2365 mm Loading height: approx. 850 mm Weight (according to nameplate): approx. 710 kg Operating hours (as indicated): approx. 11,889 h Equipment / Features: S!MPAC / WebSeason touch control panel Ethernet / Network connection USB interface Salt spray Condensation water test Dry climate Climate / humidity operation Ring flushing line Storage tank Rod inserts Control cabinet integrated Exhaust air connection Compressed air connection Connection for deionized water Water connection for ring flushing line Condition: used Unit is fully visible as per the images provided. Current status: external operating mode. Display notice: hood not closed. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1500 Scope of delivery as shown in the images Inspection by appointment is possible. Loading can be organised. (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), CTS Credpfxsy Hkbls Ac Neb Model: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version With observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, model CS-70/600-5, suitable for precise temperature, climate, and stress screening tests in research, development, quality assurance, and industry. The unit is in used condition and can be inspected in detail as shown in the images. Current display: manual operation / stop. Operating hours according to display: Technical Data: - Temperature range: -70 °C to +180 °C - Humidity range: 10% to 98% RH - Dew point range: -10 °C to +94 °C - Test chamber volume: 600 liters - Temperature change rate according to IEC 60068-3-5: - Heating: 6.0 K/min - Cooling: 7.0 K/min - Electrical connection: 400 V 3/N 50 Hz - Nominal power: 14.6 kW - Nominal current: 22.0 A - Protection class: IP 22 - Refrigerants: R404A / R23 - Pre-cooling stage: R404A – 4.5 kg - Cooling stage: R23 – 2.1 kg / 14.5 bar - CO2 equivalent: 17.65 t / 31.08 t - GWP: 3922 / 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar Features / Equipment: - Observation window in the door - Stainless steel test chamber - LED test chamber lighting - CTS LCD control panel with digital controller - Test specimen protection / temperature limiter - Water-cooled refrigeration unit - Automatic water top-up / deionized water inlet - Test chamber and condensate drain - Volt-free contact - Digital outputs - RS232 interface - Ethernet interface - Lateral cable ports Cable ports according to installation plan: - 1x port NW 50 - 2x port NW 125 Test chamber dimensions according to installation plan: - approx. 850 x 850 x 830 mm External dimensions according to installation plan: - approx. 1900 x 1120 x 1875 mm Weight / Mass according to documentation: approx. 750 kg Scope of delivery: - CTS climate test chamber CS-70/600-5 - Including available documentation / test certificates - Delivery includes everything shown in the images Buyer assurance: - The unit can be viewed by appointment. - Loading by forklift can be arranged. - For any questions, please do not hesitate to contact us. Buyer safety information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used (Changes and errors in the technical data reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: C-70/600 CTS Climate Test Chamber C-70/600 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, suitable for precise temperature and climate testing in research, development, quality assurance, and industry. The equipment is in used condition and can be inspected fully as per the images provided. Current display shows manual operation / stop, actual temperature 16.59 °C, setpoint 5.00 °C, actual humidity 39.7% r.h., and water reservoir actual value 11.0 l. Technical Data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Nominal power: 8.7 kW Nominal current: 14.8 A Protection class: IP 22 Refrigerants: R404A (pre-cooling stage) / R23 (cooling stage) Cedpey Hkazofx Ac Nerb Cascade refrigeration unit for low temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Specifications: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Specimen protection / temperature limiter Water connection / deionized water inlet Test chamber and condensate drain Tubing ports on the side of the chamber RS232 interface as per documentation Digital outputs for specimen control Test chamber dimensions (as per documentation): approx. 850 x 850 x 830 mm External dimensions (as per documentation): approx. 1900 x 1115 x 1850 mm Weight (as per documentation): approx. 600 kg Scope of delivery: CTS Climate Test Chamber C-70/600 including available documentation / operating manuals Scope of delivery as shown in the images For your safety as the buyer: The equipment can be inspected by appointment. Forklift loading can be arranged. Additional assurance for you as a buyer: The following measures are undertaken on all chambers offered: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Subject to changes and errors in technical specifications and details!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 670 mm, feed length Z-axis: 625 mm, nominal power (apparent): 37 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 1,000 kg, total height: 2,815 mm, total length: 3,350 mm, total width: 3,760 mm, table width: 650 mm, table length: 1,300 mm, table load: 1,000 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 650 Vertical Machining Centre – 2011 Fanuc i-Series Control | 12,000 RPM | 4th Axis Ready 2011 Doosan DNM 650 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle, rebuilt spindle, 4th axis ready, 30-tool ATC, TSC, chiller & swarf conveyor. Available from Used Machine Tools Ireland. Manufacturer: Doosan Model: DNM 650 Machine Type: 3 Axis Vertical Machining Centre with 4th Axis preparation Year: 2011 Control: Fanuc i Series Condition: Very Good - spindle rebuilt in 2026 Availability: March 2026 We are pleased to offer this 2011 Doosan DNM 650 Vertical Machining Centre, a highly regarded and extremely rigid VMC, ideal for precision subcontract machining, toolmaking, and production environments. This machine is equipped with a Fanuc i-Series control and benefits from a newly rebuilt spindle, ensuring excellent performance, reliability, and long service life. The machine is prepared for a 4th axis with Nikken interface, making it an ideal platform for future rotary or multi-axis work. Key Specifications Manufacturer: Doosan Model: DNM 650 Year: 2011 Control: Fanuc i-Series Spindle Speed: 12,000 RPM Tool Taper: BT 40 X / Y / Z Travels: 1270 / 670 / 625 mm Table Size: 1300 × 650 mm Maximum Table Load: 1000 kg Rapid Traverse Rates: X / Y: 36 m/min Z: 30 m/min ATC: 30 Places Max Tool Diameter: Ø80 mm with adjacent tools / Ø125 mm without Max Tool Length: 300mm Max Tool Weight: 8 kg Machine Dimensions (Approx): 2760 x 3350 x 2815mm Machine Weight (Approx): 8500kg Features & Equipment Newly rebuilt spindle Nikken 4th Axis preparation 30-station Automatic Tool Changer (ATC) 20 bar through-spindle coolant (TSC) Coolant chiller LNS swarf conveyor Data server / networking capability Fully enclosed, heavy-duty construction Please Note No tool holders, vices, or swarf bin included Ideal For Precision engineering CNC subcontract machining Automotive & aerospace components General and high-speed milling applications Crsdpfx Acjyfh Ixe Neb The Doosan DNM 650 is known for its exceptional rigidity, accuracy, and reliability, making it one of the most popular vertical machining centres in its class. Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, functionality: fully functional, mileage: 389,303 km, power: 331 kW (450.03 HP), first registration: 10/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Crjdpfx Asy Ev Dvjc Nob Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: used, functionality: fully functional, mileage: 351,512 km, power: 331 kW (450.03 HP), first registration: 06/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Crsdpfxoy Ev A Ej Ac Nsb Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: new, Year of construction: 2025, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 380 V, input current: 63 A, type of input current: three-phase, travel distance Y-axis: 1,300 mm, workpiece length (max.): 60 mm, number of axes: 3, actuation type: electric, overall weight: 2,750 kg, Equipment: CE marking, documentation/manual, GO! 1300M CNC DRILLING LINE MACHINE OPD201001 Go! Spindle Motor 5.5 kW – ER32 (Manual) OPD201100 Go! Boring Unit – 17 Tools Capacity Csdpfjy Nyypjx Ac Njrb OPA0032 AES Wop CAD/CAM Program OPA0710 HSK F63 ER32 Tool Holder OPD201900 Go! Seaway Packaging System OPD201831 GO! HMI – English Interface

Condition: new, Year of construction: 2025, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 380 V, input current: 63 A, type of input current: three-phase, travel distance X-axis: 4,200 mm, travel distance Y-axis: 2,100 mm, number of axes: 3, number of slots in tool magazine: 8, actuation type: electric, total length: 4,200 mm, total width: 4,000 mm, overall weight: 5,000 kg, table length: 3,200 mm, table width: 2,100 mm, Equipment: CE marking, documentation/manual, SUPER NOVA 2132 - CNC ROUTER Credpfx Asy Nynmec Nsb Brand new and ready for pick-up. Showroom packaged machine including NC Hops 8 and 2*250 m³/h vacuum pumps. EXW BELGIUM. Super Nova 7.5 - 9 kW Spindle (ISO 30) Super Nova 9-Spindle Vertical Boring Unit Super Nova Handwheel Unit Super Nova Automatic Lubrication Unit Rotary Tool Changer Unit (8-tool capacity) 2 x 250m³/h Vacuum Pumps 6-Zone Vacuum Table NC HOPS - 3-Axis CNC Router (with nesting) Safety Lights (1 set) Tool Holder/Collet Kit (8 pcs) Super Nova HMI - English Interface Super Nova 2132 Seaworthy Packaging System

Condition: excellent (used), Friocell FC-B2V-M / FC 55 Laboratory Incubator The Friocell 55 (Model FC-B2V-M) is an energy-efficient refrigerated incubator featuring forced air circulation, designed for precise temperature control processes in biotechnology, botany, and the food industry. It is distinguished by a patented cooling system that minimizes sample desiccation and offers extremely short recovery times. Key Features & Equipment Cooling & Airflow: Patented forced air circulation within the double-walled interior ensures high temperature homogeneity. Control System: Microprocessor control with Fuzzy Logic to optimize heating and cooling times without overshoot. Interfaces: RS-232 port included as standard; USB host and Ethernet are available as options. Material: Inner chamber constructed from high-quality stainless steel (DIN 1.4301, AISI 304) with rounded corners for easy cleaning. Doors: One outer metal door and one inner glass door allow for sample observation without temperature loss. Specifications Volume: 55 liters Operating Temperature: 0.0 °C to 100 °C Temperature Accuracy: Temporal: ± 0.2 °C; Spatial uniformity: ± 0.5 °C (at 10 °C) Cool-down time (22 °C to 10 °C): < 21 minutes Interior dimensions (W×D×H): 400 × 370 × 350 mm Exterior dimensions (W×D×H): 620 × 640 × 875 mm (incl. door and handle) Weight: approx. 83 kg Electrical power: Max. 700 W “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de Cedpsy Nxfqsfx Ac Njrb Find more incubators—both new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2011, total width: 4,200 mm, total height: 2,900 mm, overall weight: 700 kg, Panel saw manufactured in 2011. This HOLZHER 1255 3858/1-101 features a maximum cutting length of 3,300 mm and a cutting height of 2,200 mm, providing versatile cutting capabilities. With a powerful 4.0 kW saw motor and integrated control system, it ensures precision and efficiency. Consider the opportunity to buy this HOLZHER 1255 3858/1-101 panel saw. Contact us for further details. Crjdpfxjy Nxkys Ac Nob • Cutting capacity: horizontal 3,300 mm; vertical 2,200 mm; cutting depth 60 mm • Saw motor power: 4.0 kW • Electrical: 400 V, 50 Hz • Blade diameter: 250 mm • Blade speed: approx. 5,450 rpm • Cutting directions: vertical and horizontal • Angle cutting device: 0°, 22.5°, 45° • Dust extraction interface: port diameter 120 mm; required capacity approx. 1,400 m³/h • Control system: Integrated HOLZ-HER control (electronic positioning system) • Safety equipment: full blade guarding; two-hand safety control; mechanical hold-down system Dimensions Machine Depth 1600 mm

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, TAKISAWA TM-3000Y2 FANUC 0iTF PLUS. TOTALLY AS NEW. BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES. 8 INCH + 6 INCH STANDARD CHUCK SIZE WITH:- Y-AXIS TRAVEL +45 -45 MM - LOWER TURRET (Y2 AXIS) Y-AXIS TRAVEL +45 -45 MM - UPPER TURRET (Y1 AXIS) CHIP CONVEYOR RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF SYSTEM TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 6" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA B-206 RH SPINDLE 8" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-08) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU TOOL MONITORING SYSTEM 9 BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE - MULTI BAR MAGAZINE TYPE REMAINING BAR DISCHARGE DEVICE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AXIAL DRIVEN TH, ER25 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER25 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 1 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE - 4,500 RPM RIGHT HAND SPINDLE - 6,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (+ - 45 MM) LOWER TURRET Y2-AXIS (+ - 45 MM) 8” + 6” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Dia. 215 MM Maximum Turning Dia. 215 MM Maximum Turning Length 620 MM Bar Capacity Left Spindle Ø 65 MM Bar Capacity Right Spindle Ø 42 MM AXIS TRAVELS Upper Turret Travel X1 190 / 90 MM Upper Turret Travel Y1 90 (± 45) MM Upper Turret Travel Z1 660 MM Lower Turret Travel X2 190 / 90 MM Lower Turret Travel Y2 90 (± 45) MM Lower Turret Travel Z2 660 MM Travel A (RH Spindle) 660 MM LEFT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed (RPM) 4,500 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM RIGHT SPINDLE Chuck Size Ø (6”) 152 MM Spindle Speed 6,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-5 Spindle Bore Ø 53 MM TURRETS - UPPER & LOWER Number of Tools (Upper & Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Diameter 32 MM Milling Shank Diameter 16 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 Crsdexrpnrjpfx Ac Neb FEEDRATES Upper Turret Rapids X1 / Y1 / Z1 20 / 12 / 40 M / MIN Lower Turret Rapids X2 / Y2 / Z2 20 / 12 / 40 M / MIN Rapid Traverse Speed - A (Right Spindle) 40 M / MIN MOTORS Spindle Motor - LH 15.0 / 11.0 KW Spindle Motor - RH 11.0 / 7.5 KW Turret Driven Tool Spindle Motor 5.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 3.0 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 3.0 KW Axis Feed Motor - (A) 2.5 KW SUPPLY 35 KVA MACHINE L 4,254 MM W 2,460 MM H 2,230 MM 8,300 KGS

Condition: new, Year of construction: 2024, functionality: fully functional, HYUNDAI-WIA SE2200M CNC LATHE WITH FANUC 0IT PLUS CONTROL AND C-AXIS MACHINE CONSTRUCTION & FEATURES  8” STANDARD CHUCK SIZE.  30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HIGH PERFORMANCE ROLLER LM GUIDEWAYS.  12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION INCLUDED]  4,500 RPM HIGH POWER MAIN SPINDLE.  30 X 36 M/MIN RAPID TRAVERSE RATES - X & Z AXES.  C-AXIS MAIN SPINDLE.  ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. MACHINE CAPACITIES Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 390 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 288 MM Bar Capacity - Main Ø 65 MM MAIN SPINDLE Chuck Size 8” Ø 203 MM Spindle Bore Ø 75 MM Spindle Speed (Rpm) 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max.) 167 NM Spindle Type BELT Spindle Nose A2-6 C-Axis Indexing 360° (0.001°) FEED Travel X 210 MM Travel Z 340 MM Rapid Speed X 30 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDE TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP LIVE TOOL Motor (Max / Cont.) 2.75 / 1.85 KW Milling Tool Speed 6,000 RPM Crodpex Trgcefx Ac Nob Torque (Max.) 26.2 NM Collet Size ER 20 - Ø 13 Type BMT45 TAILSTOCK HYDRAULIC NC TAILSTOCK (STD LIVE CENTRE) Taper MT 4 Quill Diameter Ø 56 MM Tailstock Travel 580 MM TANK CAPACITY Coolant Tank 150 L Lubricating Tank 0.7 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH MACHINE Floor Space (L x W) 2,220 X 1,610 MM Height 1,700 MM Weight 3,250 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO (RENISHAW) HYDRAULIC TYPE NC TAILSTOCK TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW STANDARD FACTORY FITTED MACHINE OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-i (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 150 LITRES FRONT DOOR INTERLOCK FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER TOOLBOX STANDARD TOOLING PACKAGE

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Csdpfx Acjw Dcdys Nerb Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: TJGP2065, TAKISAWA TM-4000Y2 FANUC 31i B2 - TOTALLY AS NEW BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES 10 INCH + 8 INCH STANDARD CHUCK SIZE. WITH:- Y-AXIS TRAVEL -50 +70 MM - UPPER TURRET (Y1 AXIS) Y-AXIS TRAVEL -50 +30 MM - LOWER TURRET (Y2 AXIS) CHIP CONVEYOR - RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE ABNORMAL LOAD DETECTION FUNCTION WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 8" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA BR-08 RH SPINDLE 10" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-10) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU MONITORING SYSTEM BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE FOR MULTI BAR MAGAZINE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AI CONTOUR CONTROL II CHIP CONVEYOR UPGRADE (MORETECH JAPAN) AXIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE – 4,200 RPM RIGHT HAND SPINDLE - 5,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (- 50 + 70 MM) LOWER TURRET Y2-AXIS (- 50 + 30 MM) 10” + 8” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Diameter Ø 215 MM Maximum Turning Diameter Ø 215 MM Maximum Turning Length 800 MM Bar Capacity Left Spindle Ø 82 MM Bar Capacity Right Spindle Ø 65 MM AXIS TRAVELS Upper Turret Travel X1 230 / 120 MM Upper Turret Travel Y1 120 (- 50 + 70) MM Upper Turret Travel Z1 800 MM Lower Turret Travel X2 210 / 80 MM Crjdpfx Aoxrnwljc Nob Lower Turret Travel Y2 80 (- 50 + 30) MM Lower Turret Travel Z2 800 MM Travel A (RH Spindle) 900 MM LEFT SPINDLE Chuck Size Ø (10”) 254 MM Spindle Speed (RPM) 4,200 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-8 Spindle Bore Ø 94 MM RIGHT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed 5,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM Inner Bearing Dia.120 TURRETS Number of Tools (Upper/Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Dia. 40 MM Milling Shank Diameter 20 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids- X1 / Y1 / Z1 20 / 12 / 30 M / MIN Lower Turret Rapids - X2 / Y2 / Z2 20 / 12 / 30 M / MIN Rapids on A (Right Spindle) 30 M / MIN MOTORS Spindle Motor - LH 18.5 / 15.0 KW Spindle Motor - RH 15.0 / 11.0 KW Turret Driven Tool Motor 7.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 2.5 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 2.5 KW SUPPLY 50 KVA MACHINE L 4,741 MM W 2,748 MM H 2,444 MM 9,370 KG

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: OKUMA, number of axes: 4, This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details. • Longitudinal Travel (X): 1020 / 995 mm • Cross Travel (Z): 260 / 140 mm • Turning Range: 340 mm • Swing Diameter over Bed Cover: 530 mm • Swing Diameter over Cross Slide: 380 mm • Spindle Nose: ASA-A2 / DIN 55026 Gr. 6 • Spindle Bore: 62 mm • Spindle Diameter in Front Bearing: 100 mm • Chuck Diameter: 200 mm • Main Drive: Motor spindle (hollow shaft motor) frequency-regulated 60% ED • Power (Main Drive): 22 kW • Max Torque: 412 Nm • Speed Range: 45 - 4,500 rpm • Speed Levels (Electrical): 2 • Feed Drive: AC servo motors, digitally regulated Credpfey Nmi Dex Ac Nob • Feed Range X/Z: 0 - 1,000 mm/U • Rapid Traverse X/Z: 15 / 20 m/min • Power X, Z: 2.4/1.5 kW and 4/4 kW • Feed Force X, Z: 11/3.7 kN and 7/6.7 kN • Turrets: 2 tool turrets • Live tooling: Yes (C-axis and driven units) • Tapping: Synchronous tapping • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Wear and breakage monitoring • Tool measurement: Integrated tool setter / measuring device • Tailstock: Programmable, towable with bed slide, automatic clamping • Tailstock quill: Controllable via M-command • Draw tube bore: 55 mm (partial hollow clamping cylinder) • Interface: DNC Interface RS-232C • Cooling system: Reinforced pump (8 bar at 30 l/min) • Programming: ONE TOUCH Dialog-NC (automatic work plan generation) Additional equipment • Chip conveyor (1,200 mm discharge height) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 230 mm, travel distance Z-axis: 950 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, number of axes: 2, Horizontal turning machine manufactured in 1999. This Weiler E35 D features a Siemens Sinumerik 810D control with Weiler D1 user software and a 12.1-inch TFT color flat screen. It includes a coolant unit with a flow rate of 30 l/min and a tool holder for quick-change operations. If you are looking to get high-quality turning capabilities, consider the Weiler E35 D machine we have for sale. Contact us for further details. • Control: Siemens Sinumerik 810D with Weiler D1 user software Credpfx Aoy Nlvcec Nsb • Display: 12.1-inch TFT color flat screen • Operating voltage: 400 V • Control voltage: 24 V • Connected load: 14 kW • Nominal current: 26 A • Frequency: 50 Hz • Main fuses: 35 A • Coolant unit: 30 l/min at 0.4 bar • Tool holder: Multifix quick-change size B • Features: Teach-in functions; graphic-supported contour programming; V-24 interface; electronic handwheel for manual contour following Additional equipment • Included accessories: 1 change holder; fixed center point; spindle plug; key set; manuals; chip protection wall; movable splash guard; chuck guard with limit switch monitoring • Optional equipment included: Fixed steady rest with roller jaws (12–150 mm); adjustable hollow spindle stop; lever-operated collet chuck for DIN 6343-48 (173E) Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2006, Heller MCH 280 C 5 axes Year of manufacture: 2006 Control: Siemens 840 D Spindle speed: 8000 rpm Travel paths X: 1000 mm Y: 1200 mm Z: 1100 mm Crjdey Nybgepfx Ac Nob Pallet size: 630 x 630 mm Rotary table: 360,000° x 0.001° Tool magazine positions: 400 Interface: HSK 100

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Credpfx Acoif Ek Re Nsb Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value Csdjfnlkwopfx Ac Nsrb • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Cedpfx Aowgc I Roc Norb Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, mileage: 181,050 km, power: 103 kW (140.04 HP), first registration: 11/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle no.: 1089X ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide. Always over 400 vehicles immediately available at the best selection and price. More than 1,000 satisfied customers per year – top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent condition! 1 owner, German vehicle, non-smoker vehicle Complete service history, maintained exclusively by Volkswagen New brakes front and rear 8 tires included Summer tires on steel rims Winter tires on steel rims Number of seats: 6 Workshop "ALUCA" with vice and shelving system Tow bar, increased towing capacity 3,000 kg 230 Volt power outlets Reversing camera Climatic air conditioning Heated seats LED cargo area lighting Tinted windows ---- Special equipment: * Storage package 2 * Storage: 2 DIN slots in front under roof liner * Interior lights in cab: reading lamp front * Tow bar: fixed ball-head * Trailer stabilization program * Audio system Composition Colour (Radio / SD card interface / USB) * Multimedia interface 2 x USB (Type C) front * Bluetooth mobile phone interface * Mobile online services App-Connect * Lockable glove compartment * Spare wheel with road tires including vehicle jack and toolkit * Toolkit and jack * Driver/passenger airbags, passenger airbag deactivatable * Exterior mirrors electrically adjustable and heated * Roof rack mounting rails * Roof rack/base rack * Rear wing doors with glazing * Climatic air conditioning (cab) * Emergency call system * Digital radio reception (DAB+) * Reversing camera * Seat covers/upholstery: artificial leather * Cab seats: double passenger seat with storage compartment * Cab seats: heated driver and passenger seat * Cab seats: driver comfort seat * Seats in cargo/passenger area: 1st row, four-seat bench * Auxiliary heater (air) Standard equipment: Csdpfx Aceyrla So Njrb Anti-lock braking system (ABS), drive type: front wheel drive, convex exterior mirror left, convex exterior mirror right, LED indicator lights integrated in exterior mirrors, cab floor: rubber, underbody trim with improved aerodynamics, twin headlights, entry handles rear left and right, electronic stability program (ESP), driver assistance: hill start assist, driver assistance: crosswind assist, fixed windows front left and right in cargo/passenger area, electric windows front, laminated windscreen, two folding remote keys, vehicle without cargo partition, 6-speed manual transmission, A-pillar grab handles, LED interior lighting in cab, body: standard double cab van, roof variant: standard roof, child safety locks in cargo/passenger area, 75-liter fuel tank, upper chrome strip on radiator grille, cargo partition behind 2nd seat row, height-adjustable steering column, headlight range adjustment, truck homologation, engine 2.0L – 103 kW TDI, multifunction display Plus, rear fog light, wheelbase 3640 mm, tire repair kit, diesel particulate filter, low-emission according to Euro 6d, right sliding door with intermediate stop for opening limitation, SCR system (AdBlue technology), electromechanical power steering, start/stop system, 12V sockets in cab (2 units), front bumper in grey, daytime running lights, tie-down eyes.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 3,460 mm, travel distance Y-axis: 1,615 mm, travel distance Z-axis: 400 mm, number of axes: 5, overall weight: 3,500 kg, spindle motor power: 11,000 W, spindle speed (max.): 20,000 rpm, This 5-axis MORBIDELLI Author X5 was manufactured in 2008. It features a working field of 3050 mm in the X direction, 1348 mm in the Y direction, and 400 mm in the Z direction. The machine is equipped with a powerful 11 kW spindle and a tool changer with 12 positions. If you are looking to get high-quality CNC wood machining capabilities, consider the MORBIDELLI Author X5 machine we have for sale. Contact us for further details. • Voltage: 400 V • Frequency: 50 Hz • Current: 48 A • Power supply: 400 V, 50/60 Hz • Power consumption: 28 kVA • Working field: X 3050 mm, Y 1348 mm, Z 400 mm • Rapid speeds: X 50 m/min, Y 45 m/min, Z 22 m/min • Drive system: ball screw in X/Y/Z axes • Pendulum processing: yes • Spindle: 5-axis Morbidelli milling spindle • C axis rotation: 640 degrees • B axis rotation: +/- 100 degrees • Inverter power: 18 kW • Tool holder: HSK 63F • Minimum distance table to spindle: 40 mm • Tool changer: rear tool room in X axis • Tool changer positions: 12 • Max tool diameter: 240 mm • Max tool length: 220 mm • Max tool weight: 8 kg • Work table: vacuum clamping system • Vacuum pressure: 3000 Pascal • Control system: NUM 1040 • Operating system: Windows XP Professional • Processor: 32-bit Pentium • RAM: minimum 256 MB • Hard disk: minimum 2 GB • Screen: 17 inch • Interface: RS232 • Air pressure: 6 to 8 bar • Air consumption: 250 NL/min • Dust extraction connection: 250 mm Codpsy Ndn Rsfx Ac Norb • Air speed extraction: 30 m/s • Machine dimensions: approx. 5300 x 2200 x 2500 mm • Required space: approx. 6300 x 4000 x 3000 mm • Safety equipment: CE-compliant protection system • Central lubrication: automatic • Drilling head: 12 + 6 spindles • Vertical spindles (Y direction): 5 • Vertical spindles (X direction): 8 • Horizontal spindles (X direction): 4 • Horizontal spindles (Y direction): 2 • Vertical spindle pitch: 32 mm • Horizontal spindle pitch: 64 mm • Drilling speed: 4000 rpm • Drilling unit power: 2.2 kW • Drilling tool holder: M10 • Pneumatic stroke: 60 mm Additional equipment • Chip conveyor (included) • Vacuum pump 250 m3/h

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 750 was manufactured in 2006. It features a HEIDENHAIN control unit with an iTNC 530 style interface, a T-slotted work table equipped with dual manual/hydraulic vises, and a mechanical spindle interface with coolant nozzles. If you are looking to get high-quality vertical machining capabilities, consider the WEMAS VZ 750 vertical machining centre we have for sale. Contact us for further details. • Axis movement: X/Y/Z, vertical orientation • Spindle/tool clamping: Mechanical clamping with coolant nozzles at spindle • Work table: T-slotted table • Electrical cabinet: HEIDENHAIN drive system; Siemens/Phoenix Contact modules; EPCOS filter Crodpfxjy Ncgxs Ac Njb • Machine features: Full enclosure; integrated work light; air and coolant lines Additional equipment • Workholding: Dual vises (manual/hydraulic) • Tooling: Assorted BT/SK tool holders on external rack • Extraction: External extraction ducting

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,723 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,140 mm, spindle motor power: 22,000 W, overall weight: 6,000 kg, controller manufacturer: OKUMA, controller model: OSP-P300, number of axes: 3, This 3-axis Okuma Genos L300 E-M was manufactured in 2014. It features a maximum turning diameter of 300 mm and a turning length of up to 1000 mm. The machine is equipped with a spindle speed of up to 3800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300 E-M CNC lathe we have for sale. Contact us for further details. • Chuck size: 203 mm • Max. turning diameter: 300 mm • Max. turning length: 450–520 mm (up to 1000 mm optional) • Z-axis travel: 450–1140 mm Crsdpjy I Uu Eofx Ac Nsb • Spindle bore: 65 mm • Turret: 12 stations • Tool type/interface: VDI / BMT • C-axis: Yes Technical Specification Counter Spindle No Driven Tools Yes