Used Prinect Prepress Interface for sale (3,927)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 46,976 h, Control Unit Brand FANUC Model Series Oi-TD Additional Equipment Transformer 8 KVA / Airblow through the spindle / LNS chip conveyor / Interface for high pressure coolant system with 4 M-codes Cedpfex D Iq Aex Aa Nopw This Citizen Miyano GN-3200 was manufactured in 2016. It features a Fanuc 0i-TD control, an 8 KVA transformer, MAS quick change toolholders, and a collet chuck device. Additional features include an airblow through the spindle, a tool breakage sensor, a Blum measuring probe, and an LNS chip conveyor. Interface for high-pressure coolant system with 4 M-codes also included. Contact us for more information about this machine. Application Types Turning

Condition: good (used), MMM Group Vakulab HL Medical Autoclave Cpjdpfx Aoyifqvea Nsw This listing is for the MMM Group Vakulab HL Medical Autoclave. The unit is in full working condition and is ready for immediate use. Overview The Vakulab HL autoclave from MM Group Medical is a high-performance, GMP-compliant sterilizer designed for the safe, reliable, and validated sterilization of laboratory instruments, equipment, and materials. Specifically engineered for use in pharmaceutical manufacturing, biotechnology facilities, and research laboratories, the Vakulab HL combines advanced vacuum-assisted steam sterilization with robust stainless steel construction to ensure consistent results in even the most demanding applications. Key Features inc Advanced Steam Sterilization, Pre- and Post-Vacuum Cycles: Ensures efficient steam penetration and rapid drying, Optimized Steam Distribution: Uniform sterilization across all load types Programmable Cycles: Fully adjustable parameters for different sterilization needs. GMP & Cleanroom Ready, Double-Door Pass-Through Design (optional): For installation between clean and non-clean areas, Stainless Steel Chamber & Piping: High-grade AISI 316L for corrosion resistance and hygienic operation, Integrated Monitoring: Real-time cycle control with full batch documentation capability. Operational Safety & Control User-Friendly HMI: Touchscreen interface for programming and monitoring, Automatic Door Operation: With safety interlocks to prevent accidental opening under pressure, Built-In Diagnostics: Self-check functions for preventive maintenance. Technical Specifications. The Vakulab HL is a vacuum-assisted steam sterilizer available in multiple chamber volumes, typically ranging from 300 to 1,000 liters. The sterilization process operates at temperatures between 121 °C and 134 °C, controlled via a PLC-based system with an intuitive touchscreen human-machine interface (HMI). steam, water, compressed air, and electricity. It is designed to meet EN 285, PED, ISO 9001, and GMP compliance requirements, and can be validated to ISO 17665 sterilization standards. Applications - Pharmaceutical Manufacturing: Sterilization of equipment, components, and containers, Biotechnology: Sterilization of fermentation vessels, culture media, and instruments, Research Laboratories: Sterilization of glassware, tools, and lab consumables, Hospitals & Clinical Settings: Safe sterilization of surgical instruments and textiles, System Components, High-grade stainless steel chamber with polished finish, Vacuum pump system for pre- and post-cycle air removal, Steam generation and distribution system, Control panel with PLC and HMI touchscreen, Integrated temperature and pressure sensors for validation. Quality & Compliance, Manufactured in accordance with GMP guidelines, Complies with EN 285 and ISO 17665 sterilization standards, Full FAT/SAT/IQ/OQ/PQ support for validation in regulated environments, Designed for integration into cleanroom and production facilities, Benefits - Consistent, Validated Sterilization for a wide range of load types.

Condition: ready for operation (used), total width: 2,011 mm, NIKON-Metris / LKMetrology X: 1000 – Y: 2500 – Z: 800 mm Het LK V-SL- model beschikt over een revolutionair ontwerp dat de beste scan- en inspectieprestaties levert van alle werkende CMM#39;s op de markt. De multisensor LK V-SL coördinatenmeetmachine onderscheidde zich door zijn unieke karakter en voldoet aan de eisen van de automobiel- en lucht- en ruimtevaartindustrie. Dankzij de mogelijkheid om zeer nauwkeurige metingen uit te voeren (HA – High Accuracy), versterkt dit systeem als referentie-CMM voor metrologielaboratoria en biedt het een submicronnauwkeurigheid voor toepassingen die de hoogste meetnauwkeurigheid ingewikkeld. Laatste kalibratie: 19-09-2024 Renishaw-be systeem: -Probekopcontroller: PHC 10-2 -Interfaceselector 191-2 -Probe-interface PI 200 -TP 200 Renishaw-meettaster Laserbe-systeem. LC60DX De LC60Dx is ontworpen voor 3D-laserscanning met hoge snelheid en een gemiddeld bereik op coördinatenmeetmachines (CMM#39;s). Het apparaat biedt uitstekende prestaties bij het scannen van grote onderdelen, zoals mallen, autopanelen of structurele componenten, met een nauwkeurigheid tot 9 micron. Renishaw PH10M - Gemotoriseerde indexerende meetkop Rotatie-assen: A-as: ±180° B-as: 0–115° Indexeringsstap: 7,5° → wat een totaal van 720 positieve positieve positieve resultaten opleveren Interface: Autojoint/M8-aansluiting (compatibel met modulaire testsystemen zoals Renishaw TP200, SP25M of Nikon/Metris laserscanners) Maximaal stylusgewicht: ca. 300gr Maximale styluslengte: tot 300 mm Positie herhaalbaarheid: ±0,4 µm (0,0004 mm) Toepassingen: Meting van onderdelen met complexe vormen (turbinebladen, mallen, behuizingen, enz.) Wordt gebruikt in combinatie met probes zoals Renishaw SP25M, TP200 of Nikon/Metris LC15Dx Compatibel met de meeste CMM-merken (DEA, Hexagon, Mitutoyo, Wenzel, LK, etc.) SCHUNK - snelwissel-klemsysteem voor gebruik op CNC-machines. Het is bedoeld voor het vastzetten van pallets, het opspannen van werkstukken op de machinetafel met een zeer hoge positioneringsnauwkeurigheid (tot 0,005 mm). Fabrikant: SCHUNK (Duitsland) Model: VERO-S NSE plus 90 Type: Snelwisselklemmodule Modulediameter: 90 mm Bedrijfsdruk: 6 bar Klemkracht: tot 25.000 N (25 kN) Materiaal: gehard roestvrij staal Bediening: Pneumatische bediening met mechanische zelfvergrendeling Positioneringsnauwkeurigheid: ≤ 0,005 mm Cpjdexl Hxujpfx Aa Njw

Condition: ready for operation (used), Metris coördinatenmeetmachine (CMM) gemaakt in het Verenigd Koninkrijk, nu eigendom van Nikon Metrology. LKMetrologie Structuur van granieten basis met keramische brug en keramische Z-ram (LK Ceramic Bridge Technology) Geschikte probes: Renishaw PH10M/MQ, TP20, TP200, SP25M, SP80 of Nikon LC15Dx / LC50Cx laserscanners Laatste Kalibratie: 19-09-2024 Functies: Keramisch brugontwerp – zorgt voor dynamische stabiliteit en stijfheid Hoge nauwkeurigheid en snelheid voor dimensionele inspectie van grote of complexe onderdelen Geschikt voor contact- en laserscansensoren Typische toepassingen: lucht- en ruimtevaart, automallen, gereedschappen en precisiefabricage CAMIO MULTISENSOR CMM-SOFTWARE INLCUSIEF: Renishaw (optioneel): - Sonde-interface PI 200 - Interfaceselector IS1-2 - Renishaw PH10MQ - Nikon LC60D - Nikon LC15Dx - TP 200-sonde - SM25-1 - SM25-2 - SM25-3 - FCR 25 Autochange Rack - AOR3 Autochange Rack - Bol Renishaw + Motivair Luchtdroger Cpodoxl Hxnspfx Aa Now

Condition: used, mileage: 269,000 km, power: 107 kW (145.48 HP), first registration: 11/2015, fuel type: diesel, overall weight: 5,200 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space length: 5,200 mm, loading space width: 2,130 mm, loading space height: 2,050 mm, Year of construction: 2015, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Special equipment: Trailer socket preparation, audio system: radio with CD player, MP3-capable, USB and Bluetooth hands-free system, body manufacturer interface, electric exterior mirrors. adjustable and heated, long exterior mirrors, for vehicle width 2350 mm, generator 180 A, fire extinguisher holder, fuel tank: 90 litres, acoustic reversing alarm (external warning system), seats in the driver's cab: single passenger seat, seats in the driver's cab: comfort driver's seat (hydraulic) Other equipment: Airbag on driver's side, traction control (ASR), version: C series, brake assistant, electric brake force distribution, digital tachograph, rear axle suspension: trapezoid, tinted windscreen and side windows, body/structure: sales structure, headlight range control, engine 3.0 litres - 107 kW diesel, radio preparation with loudspeaker, wheelbase 4350 mm, spare wheel in driving tires, spare wheel holder between floor longitudinal member, low emissions according to Euro 5 emissions standard, permissible Total weight 5.20 t, payload 925 KG 1 SIPHON UNDER RESERVE AND 2 UNDER THE SHOWCASE // LIFTING STRAP LONG 4640 MM - WIDTH 1090 MM SUPPORTED BY GAS COMPASS AND ELECTRIC CYLINDER + LONG FOLDING STRAP .4640 MM - WIDTH 300 MM // COUNTER LENGTH 1700 OF SHOWCASES // REFRIGERATION GLASS COLUMN LENGTH 1000 X WIDTH 900 MM POWER FROM THE GROUP AND VALVE // 1/2 HP COMPRESSOR HOUSING IN THE CELL // EUTECTIC PLATES 1 GREEN BLOCK. IN THE REFRIGERATION COLUMN // EUTECTIC PLATE 1 GREEN BLOCK. IN THE HIGH RESERVE 2 IN L IN THE REFRIGERATOR DISPLAY 1 BLOCK IN THE LOWER RESERVE // AUTOMATIC DEFROST + REGULATOR // TEMPERATURE DISPLAY Quantity: 3 FOR DISPLAY, LOW AND HIGH RESERVE // 220 V INCLINE FOR THE SCALE // 24 V SOCKET FOR THE SLICER // 12V/24V CONVERTER // BATTERIES LITHIUM BATTERY PACK WITH CHARGER // 12V/220V PURE SINE CONVERTER The vehicle is in good condition!! Cpedpfx Aaeyrc U Hs New 3 units available, prices from ¤29,999 net New MOT and AU at an additional cost Financing possible through Santander Bank

Condition: used, mileage: 144,000 km, power: 100 kW (135.96 HP), first registration: 03/2020, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, soot filter, Special equipment: All-weather / all-season tires, Lighting Package 1, front and rear mud flaps, cab seats: double passenger seat, cab seats: comfort driver's seat. Additional equipment: Driver's side airbag, audio system: Radio R 16 BT (AUX-IN, USB port, and Bluetooth), electrically adjustable and heated exterior mirrors, single tires on 2nd axle / rear axle, electric auxiliary heater (Quickheat), electrical interface for bodies, 16-pin, electrical interface for additional conversions, driver assistance system: crosswind assistant, 185 A alternator, interior filter: pollen filter, body type: flatbed, body variant: vehicle length L3, fuel tank: 80 liters, height and reach adjustable steering column (steering wheel), headlamp range adjustment, model update, engine 2.3 L - 100 kW Biturbo CDTI, wheelbase 4,332 mm, spare wheel (full size), low emissions according to Euro 6d-TEMP standard, steel rims 6.5x16, permissible gross vehicle weight 3.5 t. Cedpfxjyrc Hpo Aa Nspw Vehicle is in good condition, price is fixed!!! Cargo area: Length 3.80 m, Width 2.10 m Service history up to 125,439 km 2 keys TÜV valid until 10-2026

Condition: used, mileage: 57,800 km, power: 88 kW (119.65 HP), first registration: 09/2021, fuel type: diesel, overall weight: 2,835 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, soot filter, Special Equipment: Electronic parking assist, Handyman package, Full-size spare wheel (incl. spare wheel carrier) Codpfx Aeyrdaqja Nspw Additional Equipment: Passenger airbag (deactivatable), Driver airbag, Audio system: Radio with Bluetooth/audio interface MP3 + DAB, Electrically adjustable and heated exterior mirrors, Brake assist, Electronic Stability Control (ESC) with Hill Holder and Traction Plus, Electric front windows with one-touch function, Rear wing doors without windows, Interior Package 3, Body/Configuration: Standard panel van, Partition wall to the cargo area, Engine: 2.0L – 88 kW turbo diesel Ecojet, Optics Package 3 / Professional Design, Wheelbase 3,098 mm, Full wheel covers, Tire repair kit, Low emissions according to Euro 6d-TEMP standard, Sliding door to cargo/passenger compartment on right, Cabin seats: double passenger seat with storage/compartment (Mobile Office), Cabin seats: driver comfort seat, Steel rims 6x16, Engine start/stop system, Socket in cargo/passenger compartment, LED daytime running lights, Plastic trim in cargo/passenger compartment The vehicle is in good condition, 2 keys Financing available through Santander Bank

Condition: used, mileage: 179,980 km, power: 132 kW (179.47 HP), first registration: 12/2020, fuel type: diesel, overall weight: 7,200 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,800 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 2,510 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Special equipment: - Overhead storage in the cab, storage compartment on the dashboard with USB port, front axle load 2.7 t, audio system: digital audio system (DAB) with USB and Bluetooth hands-free, bodybuilder interface, rear differential lock, automatic climate control, height and reach adjustable steering column (steering wheel), light and rain sensor, cargo area lighting switch, rear cross member at frame end, front mud flaps, cab seats: luxury driver's seat, Traction Plus (electronic traction control) with hill descent assist, auxiliary heater (hot water) with timer Additional equipment: - Driver's airbag, trailer stability program (TSM), trailer socket pre-installation, traction control system (ASR), model version: C-series, electrically adjustable and heated exterior mirrors, extended exterior mirrors for vehicle width 2350 mm, brake assist, electronic brake force distribution, driver assistance system: hill start assist (AAS), emergency braking assistant AEBS + City Brake, proactive lane departure warning system (LDWS), digital tachograph, front axle suspension: torsion bar, tinted windshield and side windows, alternator 210 A, automatic transmission - Hi-Matic (8-speed), A-pillar grab handle, urea tank (AdBlue): 20 liters, body/chassis: standard flatbed, fuel tank: 90 liters, engine 3.0 l - 132 kW diesel, wheelbase 5100 mm, spare wheel with road tires, low emissions compliant with Euro 6d standard, cab seats: twin passenger seat, maintenance indicator, gross vehicle weight 7.00 t, twin rear wheels on second axle/rear axle Tail lift Palfinger, 1000 kg Cargo area dimensions (internal): L 6.20 m x W 2.46 m x H 2.51 m Payload: 2,600 kg Cedjyrc Srepfx Aa Njpw Service book, next inspection at 198,000 km New TÜV and emissions test available at extra cost Financing available

Condition: used, mileage: 29,900 km, power: 100 kW (135.96 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special Equipment: Storage compartment on dashboard with USB port, audio system: digital audio system (DAB) with USB and Bluetooth hands-free kit, bodybuilder interface with extension module and CAN data bus, vehicle key with remote control, electric parking brake, steering column (steering wheel) height and reach adjustable, PTO (power take-off) 180 Nm, smoker package, cab seats: single passenger seat, cab seats: comfort driver seat (hydraulic) Additional Equipment: Driver’s airbag, trailer stability program (TSM), trailer socket pre-installation, traction control (ASR), comfort dashboard in blue, model: S-series, exterior mirrors electrically adjustable and heated, brake assist, electronic brake force distribution, driver assistance system: hill start assist (AAS), rear axle suspension: reinforced parabolic, front axle suspension: transverse leaf spring, tinted windshield and side windows, alternator 210 A, speed limiter system: 160 km/h, urea (AdBlue) tank: 20 L, body/chassis: flatbed, fuel tank: 70 L, blue radiator grille, engine: 2.3 L – 100 kW diesel, wheelbase: 3450 mm, low-emission according to Euro 6d standard, service interval display, permissible total weight: 3.50 t Versalift LT-30-110-TB 11.2 meters 2 persons 200 kg Cpedpfx Aasyrc Nds New The vehicle is in very good condition! Financing available through Santander Bank.

Condition: used, mileage: 109,000 km, power: 96 kW (130.52 HP), first registration: 11/2018, fuel type: diesel, overall weight: 3,430 kg, color: white, gearing type: mechanical, emission class: euro6, loading space length: 3,150 mm, loading space width: 2,000 mm, loading space height: 2,020 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Special equipment: - Exterior mirrors electrically adjustable, heated and foldable - Reinforced battery - Roof storage / front roof shelf - Document holder (smartphone / tablet) - Driver assistance system: emergency brake assist - Speed limiter - Navigation system with color display - Seats in driver’s cab: air-sprung driver's seat - USB interface Further equipment: - Driver's airbag - On-board computer - Padded headrests - Engine: 2.0 L – 96 kW Blue-HDI FAP catalytic converter - Radio pre-installation - 4 loudspeakers - Wheelbase: 3450 mm - Spare wheel with identical road tires - Low-emission according to Euro 6 emission standard Cjdpfx Aoyrc D Uja Nopw - Rear disc brakes - SCR system (AdBlue technology) - Side protection strips - Seat cover/upholstery: fabric - Passenger double seat in driver's cab (includes automatic seatbelt) - Driver's seat with armrest and height adjustment - Driver's seat with lumbar support - Permissible gross vehicle weight: 3.5 t * Tail lift * Air suspension * Navigation system * Navigation pre-installation * Power steering * Partition wall * Central locking Speed control: Cruise control Air conditioning: Air conditioning system Safety: ABS * ESP Parking assist: Reverse camera Tail lift: D Hollandia Cargo space: L 3.15 m x W 2.00 m x H 2.02 m 1 key Payload: 800 kg The vehicle is in very good condition. New TÜV and AU available for an additional charge. Taxed according to par. 25a! VAT not deductible!

Condition: used, mileage: 89,000 km, power: 110 kW (149.56 HP), first registration: 07/2017, fuel type: diesel, overall weight: 7,000 kg, color: white, gearing type: mechanical, emission class: euro6, loading space volume: 19 m³, loading space length: 4,156 mm, loading space width: 2,209 mm, loading space height: 2,092 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Csdpfx Ajyrc D Iea Nopw Storage compartment on dashboard with USB connection, 13-pin trailer socket, audio system: digital audio system (DAB) with USB and hands-free Bluetooth, bodybuilder interface, roof storage with additional DIN compartment, vehicle key with remote control, generator 180 A, fire extinguisher holder, refrigeration compressor 170 cc, acoustic reverse warning (external warning system), switch for lighting in load compartment, end crossmember on frame end, front mudflaps, oil pan guard, seats in driver's cab: luxury driver's seat Other equipment: Driver's side airbag, traction control system (ASR), Design: C-series, Exterior mirrors electrically adjustable and heated, long exterior mirrors for vehicle width 2350 mm, brake assist, electronic brake force distribution, driver assistance system: lane monitoring assistant, digital tachograph, rear axle suspension: trapezoidal, tinted front and side windows, A-pillar grab handle, body/superstructure: platform, combination instrument with pixel matrix display, fuel tank: 90 l, headlight range control, engine 3.0 l - 110 kW diesel, radio preparation with loudspeakers, wheelbase 3750 mm, spare wheel with road tires, spare wheel holder between floor longitudinal members, low-emission according to Euro 6 standard, seats in driver's cab: double passenger seat with headrests, maintenance indicator, perm. total weight 7.00 t The vehicle is in good condition Financing possible

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 004-040.0004, CNC Cylindrical Grinding Machine Manufacturer: STUDER Model: S22 CNC Year of manufacture: 2009 Machine / Workpiece Data Distance between centers: approx. 650 mm Center height: 175 mm Maximum workpiece weight: 150 kg Maximum grinding length: approx. 800 mm Cpjdpfx Aaoxtpnzs Nsw Linear Axes / Guides X-axis (cross slide): Maximum travel approx. 310 mm X-axis feed rate up to approx. 15,000 mm/min (depending on configuration) Z-axis (longitudinal slide): Maximum travel approx. 850 mm Z-axis feed rate up to approx. 30,000 mm/min Grinding Spindle / Grinding Wheel Main spindle power, e.g. 12.5 kW in the standard version Standard grinding wheel diameter e.g. Ø 500 × 80 × 203 mm, circumferential speed up to approx. 50 m/s Optional high-speed grinding (HSG): e.g. grinding wheel Ø 400 x 40 x 127 mm, circumferential speed up to approx. 140 m/s Control / Software / Equipment Control, standard: e.g. FANUC 31i-A (PC integrated) with StuderWIN operator interface Guideways: Machine bed made from Granitan® S103 (mineral cast) for thermal stability and damping Dimensions / Electrical Data Machine weight approx. 8,500 kg Power supply, typically 400 V / 50 Hz (country-specific)

Condition: used, functionality: fully functional, mileage: 378,341 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Cpsdjyn Ag Uopfx Aa New Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps.

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand HAAS Cpedpfx Aasx Imtts New Main Drive Number of axis 5 Spindle Speed 12000 RPM This 5-axis HAAS UMC-750 was manufactured in 2014. It features a 12000 rpm spindle, a 40+1 tool changer, through-spindle coolant at 21 bar, and a conveyor. High-speed machining capabilities are enhanced with programmable coolant and Dynamic Work Offsets/Tool Center Point Control. It also includes Renishaw probes and a robot interface. If you are looking to get high-quality milling capabilities consider the HAAS UMC-750 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand SIEMENS Model 840D Cjdpfjx D I A Eex Aa Nepw Main Drive Number of axis 5 This 5-axis Mazak VTC 800/30SR was manufactured in 2014, featuring a robust 155-tool ATC, 15 bar through-spindle coolant, and a KUKA robot for enhanced automation. It includes a technology package for 5-axis milling and a robot interface, making it ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information about this machine. Application Types Milling

Year of construction: 2025, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel Cjdpfsuia Dqex Aa Nepw - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 60,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Cpedpfewptfrox Aa New Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: ready for operation (used), Year of construction: 2005, sheet width 3220 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed ca. 120 Grad/sec back stop - adjustable ~ 10.0 - 2.000 mm adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 total power requirement 10.4 kW voltage 400 V weight 3750 kg current new price ~ €150,000 from a maintenance workshop with very good equipment (!!) - in checked conditions - machinevideo - ?v=HKri4_4TSt0 Features: - CNC electro-motor-driven universal folding machine * ??High-precision mechanics with modern control technology * For single and series production * Robust high-speed machine with high axis speeds Cedpfx Aeypv U Iea Nspw * Torsion-free welded construction - Rotating upper beam / as an automatic tool change system * With 2 tool stations (sharp and goat's foot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Touch panel at the front right (can also be operated with a PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Accurate bending simulation * Windows XP operating system - Servo-driven control Drives * for bending/upper beam and electric backgauge - CNC electric lower beam adjustment - CNC electric backgauge * Travel speed 300 mm/sec. * With rear sheet support surface (stainless steel sheets) - 1x freely movable double foot switch - Operating instructions (PDF) Special accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool goat's foot rails, H = 130 mm - 1x 10.0 mm bending rail - 1x 25.0 mm bending rail

Condition: good (used), Year of construction: 1990, 1 used well preserved CNC controlled tool milling machine as travelling column version with CNC path control GRUNDIG Dialog 11 table size 1600 x 675 mm tool holder SK / ISO 40 traverse X-axis, longitudinal 1200 mm Y-axis, cross 600 mm Z-axis, vertical 500 mm table load 2000 kg speed range 20 - 6300 rpm feed range, stepless 2 - 10.000 mm/min rapid traverse in all axes 10 m/min quill stroke 80 mm Drive power 100 % ED 7.5 kW 40 % ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Switch cabinet weight 470 kg Codpohhuf Hefx Aa Nopw Accessories / Special features: - CNC tool milling machine suitable for tool, jig and fixture making, training as well as mold making. - CNC path control GRUNDIG Dialog 11 - Screen graphics, dialog guided input, 3 D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets also with islands, shift and rotation of the coordinate system - Electronic handwheel - Interface RS 232 - Swiveling vertical milling head +/- 90 - Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system - Spindle sleeve adjustment 80 mm - Horizontal milling device - Full protection cabin - Ball screw spindles in all 3-axes - Coolant system - Bele

Condition: used, This listing is for the Minebea Intec Combics 3 Scales The unit is in full working condition and is ready for immediate use Key Features of Combics 3 Display & Interface High-contrast graphic display, backlit for good visibility. Softkey-supported application packages and menus. Integrated traffic light indicators (red/yellow/green) for control applications. Functionality & Applications Cpjdpfx Aeymdpuoa Nsw Combics 3 provides extensive weighing functions, including: Classification and sorting by weight Counting Fill-quantity control and dosing Formulation and statistical processes With the appropriate software, it also supports percentage weighing, gross/net/tare processes, and other advanced weighing operations. Connectivity & Interfaces Multiple data interfaces such as RS232, RS485/422, analogue 4-20 mA, Profibus DP, and Ethernet TCP/IP for integration into production systems. Robustness & Construction Designed for industrial environments with stainless-steel housing and high protection ratings (e.g., IP44 up to IP69K depending on configuration). Typical Use Cases The Combics 3 indicator is suitable for industries like food, pharmaceutical, chemical, metal, and electrical manufacturing — anywhere precise and configurable weighing with advanced control and reporting is needed. How It Fits Into Combics Scales Combics scales are modular systems: a weighing platform (bench or floor) is paired with an indicator like Combics 3 to form a complete weighing solution. The platform’s range can span from small 3 kg units up to heavy 3 t systems. If you want, I can also explain the differences between Combics 1, Combics 2, and Combics 3 indicators in more detail.

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Cpodpfev Aalysx Aa Njw Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: excellent (used), Year of construction: 2006, Cincinnati MAG MEGA 5 (XT) HPC-800HP 5 Axis CNC Horizontal Machining Centre With Siemens 840D Control Cincinnati MEGA 5-800 5 Axis Horizontal Machining Centre Utilises The Basic MEGA Twin Ball Screw-Driven Axes Configuration In 'X'=1,425mm - 'Y'=1,350mm & 'Z'=1,265mm, MEGA 'B'-Axis Table 360,000 Positions In 0.001˚ Increments, Compact 'A'-Axis Tilt Spindle With +60˚ to - 120˚. Max Component Dimension ⌀1,300mm x 2,000mm High. Work Surface Table Dimension Square 800mm x 800mm, Rectangular 800mm x 1,000mm (5 'T' Slots). Maximum Spindle Speed 15,000rpm. Maximum Table Load 2,200kg. Rapid Traverse 60m/min. Acceleration/Deceleration Rate Of 1G. Maximum Tool ⌀125mm (⌀300mm Non Adjacent), Maximum Tool Length 690mm, Maximum Tool Weight 30kg. S/No.MH00B01050001 (2006). Cedpfsydmnzex Aa Nepw With Renishaw Probe Interface, Siemens Electronic Handwheel, Barnes Chip Conveyor, ICS Chiller, Chip Blaster High Pressure Coolant System, Donaldson Torit Extraction Unit & Large Quantity Of HSK Tooling Included. Approx Overall Dimensions W6,400 x D5,000 x H2,800mm.

Condition: new, pressure 220 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm Cpodpfjynnk Esx Aa Now ram stroke speed 150 mm/sec work speed 10.0 mm/sec return speed 140 mm/sec work stroke 265 mm dayligth 480 mm table height 900 mm table width 110 mm oil volume 300 ltr. voltage 400 Volt total power requirement 18.5 kW weight 15000 kg range L-W-H 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA-66T- graphics/touchscreen * 2D graphic touchscreen programming operation * 3D display in simulation and production * 17" high-resolution color TFT screen * Bending sequence calculation * Product programming and display in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 350 mm/s * with 2x CNC-controlled backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 265 mm dayligth 480 mm table height 900 mm table width 90.0 mm oil volume 230 ltr. voltage 400 Volt total power requirement 18.5 kW weight 10500 kg range L-W-H 4100 x 2000 x 2820 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- Cpedpfxoxaa Eqe Aa Nsw ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" with graphics/touchscreen * 2D graphical programming * 15" high-resolution color TFT screen * Bending sequence calculation * Product programming and real-size display * USB interface - CNC controlled axes: Y1 - Y2 - X - R - crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 350 mm/s * with 2x manually adjustable backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Condition: used, Year of construction: 2011, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FOR SALE Victor VCenter 102E Machining Center – 2011 General description: Brand: Victor Model: VCenter 102E Year: 2011 Type: Vertical Machining Center / CNC Control: FANUC Oi-Mate MD Technical specifications: X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cpsdpfsyc Sxcox Aa Now Table size: 1200 × 510 mm Table load capacity: approx. 800–1000 kg (to be confirmed depending on version) Spindle type: 8000 to 10000 rpm (depending on configuration) Tool magazine: 20 to 24 positions (depending on version) Equipment and features: CNC FANUC Oi-Mate MD – user-friendly interface for programming and automatic machining cycles Integrated lubrication and cooling system Chip extraction and filtration system Rigid cast iron structure for high precision Option to add probes or measuring devices Dimensions and weight: Machine dimensions: approx. 3.0 × 2.2 × 2.5 m (L × W × H) Weight: approx. 4500–5000 kg