Used Profile Bending Machine for sale (67,426)

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new circular bending machine with only 29 operating hours! TECHNICAL DETAILS Working area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Gbjdpfo Aiuyxsx Aanew Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheets: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L × W × H): 1,850 × 700 × 1,200 mm Weight: 520 kg EQUIPMENT 3-roller circular bending machine with asymmetrical roller arrangement Sturdy machine frame made of spheroidal cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric closure for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control panel with foot switch for left/right operation Emergency stop safety cord Side cover Operating manual

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, overall weight: 6,300 kg, roller diameter: 250 mm, working length: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending length: approx. 3,100 mm Roller diameter: approx. 250 mm Gbodpfx Aao Ahg T Hsnew MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 1,800 mm Total weight: 6,300 kg

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation Gjdozuzpyspfx Aanjbw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, - The machine was purchased new in 1988 and has been in our possession ever since. - The visual condition can be seen in the photos. Considering its age and the existing paint condition, the mechanical condition is satisfactory. - The machine is operational and can be demonstrated by prior arrangement. Gsdpoz Hcp Nefx Aanobw - The machine has been technically modified. This provides a second, higher speed for processing smaller pipe dimensions. - A protective frame has been manufactured to protect the machine, which helps to minimize external damage. The protective frame also has two mounts that can be used to prepare or mount various profiles. - The control panel has been expanded. As a result, up to 10 set values can now be pre-programmed. - The existing standard tools are included with the machine. All arbor diameters are 60 mm. - The original operating manual is available. - The scope of delivery includes a comprehensive selection of tools for various applications, including: Round tubes Flat bars for heavy and light arbors Square profiles Rectangular tubes T-profiles Angle irons Diagonal tools - A total of 15 pallets of tools belong to the machine (see photos and description). - The machine will only be sold together with the complete set of tools. - The price is ex works. The dismantling, loading, and collection of the machine must be carried out by the buyer himself or by a commissioned forwarding agent. Technical specifications according to available documentation. Subject to prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 325100, number of rollers: 3, shaft diameter: 100 mm, pipe diameter (max.): 120 mm, overall weight: 3,000 kg, Equipment: documentation/manual, emergency stop, I am offering for sale a profile bending machine, purchased new in 1990, manufactured by COMAC, type 3025 HV, with standard configuration including vertically arranged bending axes. It is in fully operational condition and can be demonstrated under power after prior arrangement. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Maintenance & Condition: The machine is in excellent condition. In 2023 and 2025, it underwent extensive repair and overhaul work at a specialized workshop. The total investment volume for both measures amounted to approximately €50,000 net. Documentation & Evidence: The entire maintenance history is completely documented. Detailed evidence of the individual items, as well as all original invoices, is available and can be provided upon request. Original manual available. Enormous added value: Extensive tool and profile package included! To be able to serve customer orders in an even more flexible and individualized manner, significant investments were made in expanding the tool range. In addition to the standard tools, you will receive: a seven-page detailed list of all tools, including photos. • Tools for various round tubes Ø (57 + 60.3 + 70 + 76.1 steel + 76.1 plastic, + 80 + 88.9 + 101.6 + 108 + 114.3 + 120) mm. • Special tool for flat profiles, light axis up to a height of 500 mm. • Tools for square and rectangular tubes. Gbedo Af Utaopfx Aanjw • Tools for angle iron • Tools for special profiles Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documentation. Subject to prior sale. If you have any questions or require further information, please send us a message or call us.

Condition: new, Year of construction: 2026, The BENDMASTER 50 Mandrel-Free Tube Bender is an industrial machine designed for bending steel tubes and hollow sections without the need for an internal mandrel. Its integrated hydraulic clamping system, two operating modes – automatic and manual – and digital bending angle display ensure exceptional precision, repeatability, and ease of operation. The machine is ideal for mass production, prefabrication of piping systems, and workshops requiring precise control over the bending process. Main Advantages of the CORMAK BENDMASTER 50 Tube Bender Godpfx Ajvugw Hoanobw Mandrel-free bending – bending tubes and hollow sections without cross-sectional deformation and without the need for an internal mandrel. Hydraulic clamping system – precise clamping force automatically adjusted according to the tube diameter. Two operating modes: automatic and manual – full control over the bending process, with the ability to program bending sequences or operate the machine manually. Digital bending angle readout – real-time display of the preset and actual bending angles on the operator panel. 2.2 kW main motor – ensures stable bending die rotation, even when processing large-diameter tubes. Bending dies for tube diameters of 25, 32, 38, and 48.3 mm – ready for operation with the most commonly used steel tube sizes. Bending angle up to 180° – enables the production of full bends and closed-shape components. Construction and Technology The BENDMASTER 50 is equipped with two independent motors: a 2.2 kW main motor driving the gearbox and bending die, and a 1.1 kW motor powering the hydraulic pump responsible for the clamping system. In programmed mode, clamping is performed automatically using an adjustable limit switch. This configuration allows optimal clamping parameters to be achieved for each tube diameter, improving bending quality and repeatability. The control panel features a clear digital display showing both the preset and actual bending angles. Precision and Operating Efficiency The BENDMASTER 50 tube and profile bender offers a full bending range of up to 180° while maintaining high accuracy. The bending die rotation speed of 5 rpm provides precise control over the shape of the workpiece while maintaining high productivity. Automatic mode enables repetitive bending in mass production with minimal operator involvement, while manual mode offers maximum flexibility and allows settings to be adapted to specific workpiece requirements. The machine is ideally suited for bending medium- and large-diameter steel tubes in serial production environments. Applications The BENDMASTER 50 mandrel-free tube bender is suitable for a wide range of industries and applications, including: Manufacturing piping systems for plumbing, heating, and industrial installations. Prefabrication of balustrades, handrails, and structural frames. Production of furniture components and decorative elements made from steel tubes. Standard Equipment Digital bending angle readout. Bending dies for the following tube diameters: 25 mm (bending radius: 90 mm) 32 mm (bending radius: 114 mm) 38 mm (bending radius: 134 mm) 48.3 mm (bending radius: 170 mm) Technical Specifications Maximum bending angle 180° Bending die rotation speed 5 rpm Main motor power 2.2 kW Hydraulic pump motor power 1.1 kW Overall dimensions 1145 × 580 × 980 mm Weight 620 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 10 h, Includes: Special iron turning tool ATRC 18 Special scroll bending tool ATAR 305 Spiral bending device ATSC Gbjdpfxet Akxao Aanew Demonstration machine, no 10h worked! TECHNICAL DATA Shaft diameter mm. 30 Roller diameter mm. 128 Roller revolutions per minute rpm. 8.5 - 17 Drive motor Kw. 0.75 Main switch with release coil and built-in emergency (CP30 - CP30 R) - Reversing gear and double speed switch are mounted on a separate console (CP30 - CP30 R) - Foot switch Foot switch rotation control L/R with built-in emergency - (CP 30 PR) - Two-speed selector (CP 30 PR) - Mechanical regulation of the upper roller Mechanical regulation of the upper roller with position reading on display - Two traction rollers with ribbed surface Internal machine body made of steel - Steel shafts steel shafts, hardened and ground - Gear wheels made of special special steel with ground teeth - Rollers made of special steel with a hardness of 59/60 HRC - Outer cover in ABS - Working position horizontal (CP 30) Horizontal working position (CP 30) - Horizontal and vertical working position vertical (CP 30 R - CP 30 PR) Weight: CP 30 PR 240 kg. External dimensions mm: CP30 PR Base 680 x 800 - Height 825 ACCESSORIES Straightening rollers with two positions - Universal rollers ( standard ) - Operating key Operating key - Operating instructions

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, pipe diameter (max.): 30 mm, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, HUVEMA MIP30 Profile bending machine, pipe bending machine 30mm ct2437 For sale in excellent condition HUVEMA MIP30 profile bending machine, pipe bending machine Manufacturer: HUVEMA MIP 30 Type: MIP 30 Year of manufacture: 2013 Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Godpszq Sqtjfx Aanebw Working speed: 4 m/min Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch, with emergency stop Standard bending set Weight: approx. 200 kg Dimensions: W 650 x H 1350 x D:580 mm

Condition: used, functionality: fully functional, Year of construction: 2013, Sahinler HPK 200 Hydaulic section and pipe bending machine Mil and Shaft Diameter: 200mm Tool and Roll Diameter: 900mm Working Speed: 2-5 m/min Motor Power: 30 kW Bending capacity x15x4 273x5.6 / 10000 mm Gedpfxsw D Uqxo Aanobw Diameter biggest roll 9"x6,3 / 4000 mm Diameter top roll 650 mm Diameter upper roll 650 mm Roll capacity section - 3 200x200x18 / 5000 Shaft diameter 200 mm Top roll x15 with prebending min.120x120 / 3000 mm Voltage 3x400 V Working speed 2-5 m/min Power Power max. 30000 W Height 2300 mm Length 2400 mm Width 3400 mm Weight15000 kg

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,000 kg, Ring bending machine, Seravesi Model PPI-110-CNC New machine - Three driven rolls - Fully hydraulic - Two hydraulically adjustable feed rolls - Hydraulically adjustable side straightener Gbedpfx As Aiprrsanjw - Mobile external control panel - Hydraulic drive - Double tapered roller bearing - Universal standard roll set for bending various profiles - CNC control - Shaft diameter 110 mm - Roll diameter 315 mm - Motor power 11 kW 400 V/50 Hz - Can be used horizontally and vertically - Bending capacity 120x20 mm, upright, diameter 1200 mm - Round tube up to 114.3 x 5.6 mm - Rectangular tube 120x80x5 mm - Weight 3000 kg - Dimensions 160x135x140H mm Complete CNC control with automatic programming system and 10-inch color touchscreen. The display shows the position of the rolls, roll settings, machine parameters, lubrication status and settings, operating hour counter, energy-saving system, machine alarms and warning messages, as well as the status of the solenoid valves; additionally, a system for visual inspection is integrated.

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Gsdpjxn I Rwofx Aanebw

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls Gbedpezzkvpjfx Aanew separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale The machine can be inspected and demonstrated in operation on-site.

Condition: used, Year of construction: 1995, Ring & profile bending machine Type: Alpha 50 H2 Shaft diameter 50 mm Shaft length 115 mm Standard roller diameter 175 mm Gbodpfx Aajwmdp Nonew Speed ​​8 rpm 3 rollers driven Weight 650 kg Hydraulic roller adjustment Including various roller sets Price excluding VAT

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Akyapak APK 81 with control system Control system: AKYAPAK AK-400 Year of manufacture: 2018 Angle iron – legs pointing outwards: 76 × 76 × 9.5 mm, internal diameter 1,600 mm Angle iron – legs pointing inwards: 76 × 76 × 9.5 mm, internal diameter 1,981 mm Flat steel – lying flat: 121 × 28.6 mm, internal diameter 2,083 mm T-profile: 76 × 76 × 7.9 mm, internal diameter 1,397 mm Rectangular steel: 122 mm, internal diameter 2,083 mm Square steel: 44.5 mm, internal diameter 1,016 mm U-profile: 9.5 × 7.9 mm, internal diameter 1,219 mm Motor power: approx. 5.1 kW Roller diameter: 245 mm Gsdpfj Aiqnuox Aansbw Shaft diameter: 80 mm Bending speed: approx. 4.0 m/min Operating voltage: 230 / 480 V, 3 phases, 60 Hz Standard roller set included

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Gbjdpfevd Dftox Aansw Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Gbedpfx Aajz Nhlienow Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Schneider, shaft diameter: 50 mm, bending force (max.): 10 t, overall weight: 2,200 kg, total length: 2,670 mm, total width: 1,650 mm, total height: 1,400 mm, input voltage: 380 V, input current: 24 A, type of input current: three-phase, Equipment: CE marking, documentation/manual, For sale: an INDUCTAFLEX AL-1e 4-roller CNC profile bending machine, purchased in 2021. It has been used very little and has only been switched on for a total of 100 hours over the years. It comes with a complete set of rollers, including a separate holder. INDUCTAFLEX AL-1e 4-roller CNC tube bender + tool set - Purchased in 2021 - CNC-controlled, 4-roller bending machine for aluminium profiles and tubes - Bending force: 10 t - Repeat positioning accuracy: 0.05 mm - Torque per roller: max. 2,500 Nm - Shaft diameter: 50 mm - X-axis stroke: 200 mm Gedpfx Aae Afb Afenobw - Dimensions: 1,650 × 2,670 × 1,400 mm - Weight: approx. 2,200 kg - Includes a tablet for training purposes - Tool set with holder - Located in Budapest, Hungary

Condition: like new (used), functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 118 mm, overall weight: 220 kg, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, NEW!!! LFSS PK 30 Profile bending machine, pipe bender 30mm /ct2275/ Manufacturer: LFSS Type: PK30 Year of manufacture: 2025 Horizontal and vertical operation Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Working speed: 4 m/min Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch with emergency stop Standard bending set Weight: approx. 200 kg CE certification Gbsdpfjxh D Nvsx Aansw Instructions in German or English Dimensions: W 700 x H 1450 x D:750 mm

Condition: good (used), Here are the official specifications of your *BPR CP30* – 30mm spindle: It is a small but very versatile machine. Capabilities for mild steel: *Manufacturer's data for BPR / Eagle CP30:* - *Flat bar to flat bar:* 80 x 15 mm max - *Flat bar on edge:* 50 x 10 mm (to be verified, but standard on CP30) - *Round tube:* 60.3 mm x 2 mm (2-3/8" x .062") - *Square tube:* 38 mm x 3 mm (1-1/2" x .120") - *Round solid bar:* 30 mm max - *Square solid bar:* 30 mm also - *Gas pipe / Pipe:* 1"1/2 Sch 40, i.e. 48.3 mm - *U-channel:* 50 x 25 x 5 mm - *Angle iron:* 40 x 40 x 5 mm (external) / 35 x 35 x 5 mm (internal) d019775a *Technical specifications:* - Spindle diameter: 30 mm - 2 drive rollers (the lower 2) Gsdpfozwg Rzsx Aanobw - Bending speed: 8.5 m/min - US speed: 12 feet/min - Weight: 210-247 kg depending on version (yours is 187 kg on the plate = older, lighter version) d019 In short, it is perfect for standard locksmithing/metalworking.

Condition: new, Ostas hydraulic profile ring bending machine OPK 45 2 driven rollers Gbodsvmzfijpfx Aanew Digital display Incl. standard steel roller set Description Hydraulic / motorized ring bending machine Can be used horizontally and vertically with 2 driven rollers 2 rollers motor-driven Adjustment of the upper roller hydraulic Rollers are hardened Left/right rotation using foot pedal Mounting: shaft 50mm Roller diameter at top 158 mm Roller diameter at bottom 158 mm Speed 4.5 m/min Motor power: 0.75 +1.5 kW Electrical connection 400 V According to CE standard Weight 420 kg

Condition: good (used), Year of construction: 1994, machine/vehicle number: 03940027, functionality: fully functional, pressing force: 28 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 20 mm/s, table width: 600 mm, table length: 1,150 mm, table height: 900 mm, distance table to ram: 380 mm, total length: 1,150 mm, total width: 600 mm, total height: 900 mm, overall weight: 560 kg, Description: For sale is an absolutely reliable ROWA bending machine, model T-280, from its original owner. We purchased the bending machine new in 1994, and it has been in our possession ever since and has always been used with great care. The machine is in technically perfect condition and is ready for immediate use. Application: The ROWA bending machine T 280 is a hydraulic horizontal bending machine (also called a bending press) used for edge bending, bending, embossing, and straightening of metal profiles. Technical Data Overview: According to the data sheets, the machine has the following specifications: • Press force: Maximum 280 kN (corresponds to approximately 28 tons). Gedj Ai Sadepfx Aansbw • Bending capacity for flat material: Up to 150 x 25 mm, depending on the bending radius. • Bending capacity for gas pipes: 3/8" to 2". • Stroke adjustment: Continuously adjustable under pressure from 0 to 250 mm (partially specified as 200 mm). • Tool height: Maximum 150 mm. • Motor power: 3.0 kW drive. • Speeds: Working stroke continuously adjustable up to 0.6 m/min, return stroke 1.2 m/min. • Dimensions and weight: Approximately 1150 x 600 x 900 mm (L/W/H) with a weight of 560 kg. • Construction: The machine table and cylinder are made of a robust cast-iron housing, which ensures high precision and low deformation. Extension: For particularly convenient handling in the workshop, the machine has been sensibly extended: On the rear side, there is a stable, three-part tool holder (bolted on), so that important bending tools are always readily available. In addition, the machine is mounted on a custom-made base, which allows it to be quickly and easily moved at any time using a pallet truck. The machine is available for immediate delivery. Inspection and demonstration are possible by arrangement. Terms of sale and delivery: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading, and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to available documentation. Subject to prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Gsdpfx Aoxc N Rhjanobw Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Condition: new, shaft diameter: 30 mm, input voltage: 230 V, roll diameter: 30 mm, - Shaft diameter 30 mm Gedpfx Aer Rug Hjanjbw - Rotates clockwise and counterclockwise - Emergency stop - With 1 set of standard castors - With 1 set of plastic rollers for pipe 16 and 50 mm - Documentation - 230V

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret Gjdpfjyi Hrwex Aansbw - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Condition: new, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special equipment included in the price: 3 driven rollers Digital display Gsdpsg Tzbwefx Aanobw Incl. standard roll set, steel Description Hydraulic/motorized ring bending machine can be used horizontally and vertically with 3 driven rollers 3 rollers with motorized drive Feed of the upper roller hydraulically Rollers are hardened Left/right rotation via foot pedal Arbor: shaft 50 mm Roller diameter (top) 158 mm Roller diameter (bottom) 158 mm Speed: 4.5 m/min Motor power: 0.75 + 1.5 kW Electrical connection: 400 V Complies with CE standard Weight: 420 kg