Used Profile Punching for sale (7,181)

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear * 44 gearboxes * 44 profiling frames Ibjdpfszzyd Asx Afhjb * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Ibodezytmzopfx Afhjb Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamps Metal table Used exclusively in single-shift operation Includes WILSON TOOL tooling Iedpsul S Easfx Afhebb 9926

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Ibsdpfx Afozmx Scshob Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives. Production from a straight blank or regrinding of used knives using a template. Iodpfxszrx Hqj Afhebb Technical data: - Maximum grinding wheel diameter: 225 mm - Maximum tool diameter: 300 mm - Minimum tool diameter: 80 mm - Maximum tool width: 230 mm

Condition: used, Second-hand machine Year of manufacture: 1988 Condition: well-maintained Features and technical specifications: - Length of work tables: 1440 mm - Total width of the two work tables: 710 mm - Tilt adjustment of the work tables: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10–20 m/sec - Vertical adjustment of the oscillating unit: 125 mm Ibjdpfszk Ny Ejx Afhob - Air consumption: 25 NL/min - Electrical specifications: 400 V / 2.9 kW Weight: 490 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: good (used), *Description:* ZOPF RS 302 three-roller bending machine, manufactured in 1990. German-made. Iodpfx Aszxhh Refhebb Manual machine mounted on a base for bending round, square, flat, and shaped steel, stainless steel, and aluminum tubes. Mounted on a metal frame with integrated storage. Complete machine with rollers. Ideal for locksmithing, sheet metal work, and guardrail fabrication. *Specifications:* - *Brand / Model*: ZOPF RS 302 9048 L - *Year*: 1990 - *Type*: Manual three-roller bending machine - *Adjustment*: Upper roller adjustable by handwheel - *Mounting*: On a steel base with doors - *Safety*: Emergency stop - *Equipment*: Set of rollers included *Condition:* Good overall condition. Machine is visible and operational. Video available upon request.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20,580 h, punching force: 41 t, sheet thickness (max.): 2 mm, CNC punching machine manufactured in 2013. This Pivatic Punching Line PCC80-e TT HT is designed for serial production of flat sheet metal parts, featuring a punching force of 400 kN and a maximum coil weight of 5,000 kg. The line includes two punching sections for flexible and repetitive operations. If you are looking to get high-quality punching capabilities, consider the Pivatic Punching Line PCC80-e TT HT machine we have for sale. Contact us for further details. • Application: Serial production of flat sheet metal parts (panels, brackets, enclosures, electrical cabinet parts, etc.) requiring holes, cut-outs, and notches • Process flow: Coil → uncoiling → straightening → positioning → TT punching → HT punching → part cutting → discharge/stacking • Technical specifications: • Sheet width: 60–830 mm • Sheet thickness: 0.5–2.0 mm (version available for up to 4.0 mm) • Maximum coil weight: 5,000 kg • Installed power: 20 kW • Power supply: 3 x 400 V + PE • Frequency: 50 Hz • Punching system: • TT (Thick Turret): CNC punching with standard cassette-type tools for flexible holes/cut-outs/contours • HT (Hard Tool): Second punching section using dedicated tooling for repetitive operations • Space requirements: • Main line footprint: 17.5 x 5.5 m • Additional space for scrap: 1.5 m • Additional space for HT section: 1.55 m • Machine condition: Fully operational and in production; inspection and trial possible Additional equipment • Included: • Coil positioning carts • Coil uncoiler • Sheet straightener • Control panel for uncoiling/straightening unit and coil carts • Main control panel • Tilting conveyor for selectable product discharge • Transport and stacking module • Safety system with fixed guards and photoelectric barriers • Control cabinet with hydraulic power unit • Tool cassette carts Isdpfx Afszynlxshobb • Hard Tool transport and storage station • Not included: • Punching tools • Tool cassettes • Robot shown in some photos

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, The machine has not been used yet! MACHINE DETAILS Control: Teach-in Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Unladen weight: 800 kg Transport packages: 1 piece EQUIPMENT Ibjdpfx Afszuw D Tohjb Documentation CE marking CE certificate

Year of construction: 2008, condition: ready for operation (used), We are offering this ready-to-use Roll-o-Matic roller die-cutting machine, roller size 0.932/3000, manufactured in 2008. Usable roller width: 3000 mm. The upper roller has a diameter of 320 mm and is equipped with a PA or cast nylon cutting sleeve. The roller gap can be adjusted independently on both sides and is equipped with an absolute value display for the roller gap. Operating modes: setup operation; semi-automatic operation; fully automatic operation with a light barrier and time control. Includes 5 conveyor belts, a counter, and additional equipment: support rollers for the lower roller to reduce deflection under high load. Chain drive and more powerful motor. Includes control buttons on both sides. If you have any questions or require more information, please send us a message or call us. Ibsdpfx Aoz Ag Ukefhjb

Year of construction: 1996, condition: used, Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible. Ibjdpfx Aez Da R Sjfheb

Condition: used, The scope of delivery includes: 1x steel beam, used Material color: orange Box profile: 130 x 40 mm Agraffe: 4 HK (hooks) Overall length: approx. 2,780 mm Length of box profile: approx. 2,680 mm Note: This is a former pallet rack crossbar that can no longer be used in its current form. If you separate the agraffe here, you will obtain a box profile with a length of approx. 2,680 mm. Ibsdpszvlrnsfx Afhjb General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Year of construction: 2013, functionality: fully functional, working width: 330 mm, passage height: 120 mm, total length: 5,000 mm, Equipment: documentation/manual, Infrared drying tunnel for profiled wood Manufacturer: Makor Type: FTC-IRE Year of manufacture: 2013 The Makor FTC I.R.E. paint drying system is designed for the accelerated curing of paints and surface coatings using electric heating elements, which are applied to frame timber, moldings, profiled wood, and generally all types of wood profiles. It can also be used for preheating the profiles before the painting process to improve the paint quality. Passage width approx. 330 mm Passage height approx. 120 mm Infrared heating elements from above and below Includes outlet conveyor belt, manufacturer: Makor Length 4000 mm, conveyor belt width 250 mm Ibsdpfszhap Ejx Afhjb Connected load approx. 55 kW Dimensions: Drying tunnel approx. 5000 x 1400 x 1750 mm (L x W x H) Operator terminal approx. 1200 x 500 x 1100 mm (L x W x H) Conveyor belt approx. 4000 x 600 mm (L x W) Total weight approx. 2200 kg Includes documentation, wiring diagram, and operating manual.

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: foot remote control, For sale is a Mubea / Muhr und Bender BFL 350, a robust combined profile and bar steel shear with punching and notching capabilities. This machine is ideally suited for processing profiles and bar steel, as well as for punching and notching operations. Thanks to its combined design, various processing steps can be carried out with a single machine. Technical data: Manufacturer: Mubea / Muhr und Bender Type: BFL 350 Design: combined profile/bar steel shear with punching and notching capabilities Punching force: 35 t Punching: up to Ø 28 mm with a sheet thickness of 10 mm Punching: up to Ø 23 mm with a sheet thickness of 12 mm Cutting capacities: Round steel: up to Ø 30 mm Flat steel: up to 28 mm Angle steel: up to 90 x 90 x 8 mm Flat steel: up to 150 x 13 mm Flat steel: up to 80 x 16 mm The Mubea / Muhr und Bender BFL 350 impresses with its versatile applications and its solid construction, designed for industrial use. Iedpfsz Ahansx Afhobb Inspection is possible by prior arrangement. If you have any questions about the machine or would like further information, please do not hesitate to contact us.

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Ibjdpfsd Swtasx Afhob Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: used, Punching Bracket, Punching Unit SUPRA-CLAP Type C12.300 Throat Depth: 300 mm Punching Capacity: 0.3 to 2 mm material thickness, depending on cutting clearance Hole Diameter: Ø 2 to Ø 12 mm Distance between lower die and punch holder: 8.5 mm Distance between upper and lower bracket: 13 mm Punch Shank Diameter: Ø 12 mm Cutting Plate Outer Diameter: Ø 30 mm Cutting Plate Thickness: 12 mm Drop-through Opening in Punching Bracket: 14.5 mm Ibsdpfx Aexbh Rdefhsb Installation Height: approx. 145 mm - Standard punch length 70 mm with 60° head (Punch per DIN 9861 Form C) - Punch holder with spring stripper and return spring - Mounting slot 50 x 13.5 mm and 8 mm locating pin Punching Bracket Dimensions (L x W x H): 390 x 36 x 145 mm Weight: 4 kg Good condition 9 units available, price per unit 3 units with tool inserts (punch + die) 6 units without tool inserts (without punch + without die)

Condition: used, Punching bracket, punching unit SUPRA-CLAP / CEWE Type PAE 50 - 400 3GN 3P1 Throat depth: 400 mm Isdpfx Aoxbh N Tsfhjbb Punching capacity: max. 10 mm material thickness Hole diameter: max. Ø 50 mm Distance between upper and lower bracket: 19 mm Punch holder: Ø 78 mm Cutting plate outer diameter: Ø 78 mm Cutting plate thickness: 20 mm Drop-out opening in punching bracket: 52 mm Installation height: approx. 220 mm - Punch holder as a punch unit with punch mount and material stripper with disc springs - Punch holder rotation-proof guided and spring-loaded - Punch length 97 mm, shank Ø 35 / 50 mm - Round hole tool: punch Ø 41 mm and die Ø 41.5 mm - Long fixing hole: 270 x 13.5 mm Dimensions of punching bracket (L x W x H): 550 x 95 x 220 mm Weight: 27.5 kg Good condition 4 units available, price per unit 3 units with Ø 41 mm punch tool 1 unit with Ø 43 mm punch tool

Condition: used, Punching bracket, punching unit SUPRA-CLAP type C7 300 Throat depth: 300 mm Punching capacity: max. 2 mm material thickness Hole diameter: Ø 2 to Ø 7 mm Distance between lower die and punch holder: 7 mm Distance between upper and lower bracket: 12 mm Punch shank: Ø 7 mm Die outer diameter: Ø 20 mm Die thickness: 12 mm Pass-through opening in punching bracket: 11 mm Installation height: 142 mm - Standard punch length 70 mm with 60° head - Equipped with a round hole punch approx. Ø3 to 4 mm - Punch holder with stripping spring and return spring - Mounting slot 50 x 14 mm and 8 mm locating pin Dimensions punching bracket L x W x H: 390 x 26 x 145 mm Ibodpfx Afoxbh N Hshjb Weight: 3.7 kg Good condition 13 pieces available, price per piece

Condition: used, functionality: fully functional, Dans cette offre, vous achetez un système de perforation d'occasion "GBC SteamPunch Ultra". État : Il s'agit dans cette offre d'un appareil d'occasion qui peut présenter des traces d'utilisation. (petites éraflures ou jaunissement). Le fonctionnement de l'appareil a été testé. Emballage et expédition : Vous pouvez volontiers venir voir l'appareil pendant nos heures de bureau. Veuillez prendre rendez-vous à cet effet ! Un emballage résistant à la mer et une expédition dans le monde entier sont possibles sur demande ! Ibjdporvhyzofx Afhjb Pour plus d'informations, vous pouvez bien sûr nous contacter personnellement.

Condition: new, clear span: 2,700 mm, total length: 2,760 mm, The scope of delivery includes: 1x Push-through protection, new Type: universal Suitable for field width: 2,700 mm Customs tariff number: 73066192 Steel grade: S235 | S275 Consisting of EACH: 1 x Square tube, new Material color: hot-dip galvanized Dimensions: 50x50x2.0 mm Weight: 3.26 kg | per meter Tube length: approx. 2,760 mm 2x Angle bracket, new Material color: sendzimir galvanized Design: Holding device Profile dimensions: 155 x 120 mm Headplate: 120 x 40 mm Overhang: 75 mm Design: 90 degrees Opening for square tube: 51 x 51 mm Material thickness: 3.00 mm Weight / piece: 0.460 kg Incl. each: 4 x Screws, M8 x 20 mm 4 x Nuts, M8 4 x Washers, M8 2 x Drill screws, self-tapping 25 mm Ibjdpfxjzu Stcs Afhsb You can also request the following lengths: (For field width:) 1,350 mm = 19.00 € plus 19% VAT 1,800 mm = 26.00 € plus 19% VAT 1,900 mm = 27.00 € plus 19% VAT 2,000 mm = 29.00 € plus 19% VAT 2,100 mm = 30.00 € plus 19% VAT 2,200 mm = 31.00 € plus 19% VAT 2,300 mm = 33.00 € plus 19% VAT 2,400 mm = 34.00 € plus 19% VAT 2,500 mm = 36.00 € plus 19% VAT 2,600 mm = 37.00 € plus 19% VAT 2,800 mm = 40.00 € plus 19% VAT 2,900 mm = 41.00 € plus 19% VAT 3,000 mm = 42.00 € plus 19% VAT 3,100 mm = 44.00 € plus 19% VAT 3,300 mm = 47.00 € plus 19% VAT 3,600 mm = 51.00 € plus 19% VAT 3,900 mm = 55.00 € plus 19% VAT 4,300 mm = 61.00 € plus 19% VAT General information about the article: This article is only offered for collection. Any additional transport or shipment of this article will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Ijdpfx Afjzy Hpishjbb Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm material color: sendzimir galvanized total length: approx. 1.865 mm center-center-hole: approx. 1.825 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional Isdonbd Urspfx Afhobb additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm Material color: sendzimir galvanized Iodpfxsnbfapj Afhebb total length: approx. 1.015 mm center-center-hole: approx. 975 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 1x support post, used Ibedpfok Uufxox Afhjb Material color: blue Overall length: approx. 1,660 mm Profile dimensions: U: 70 x 30 mm Material thickness: approx. 2.00 mm Number of boreholes: 02 pcs. Borehole diameter: approx. 11 mm Footplate dimensions: approx. 130 x 130 x 3.00 mm Weight / piece: approx. 3.570 kg

Condition: good (used), The scope of delivery includes: 1x U-profile, used Material color: blue Overall length: approx. 1,480 mm U-profile: approx. 50 x 50 mm Material thickness: approx. 3.00 mm Number of holes: 02 pcs. Hole diameter: approx. 11 mm Weight/piece: approx. 4.930 kg General information about the item: Iodpfxelhqkwo Afhebb This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.