Used Profile Forming for sale (11,479)

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. Fgodsyw Rzaopfx Al Soh The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, DESCRIPTION: Complete production line: hydraulic uncoiler, guided feeding system, roll forming machine, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR135-310-930 high-profile sheet metal. Siemens PLC/HMI control system and Schneider frequency-controlled main drives. Minimum thickness: 0.75 mm, Maximum thickness: 1.5 mm Effective width: 930 ± 5 mm Feeding width: 1500 mm Material: Galvanized coil, Yield strength: 350 MPa Working speed: approximately 20 m/min Stacker length: 12 m Fedjzvaibopfx Al Ssgh Location of the line: Serbia

Year of construction: 1990, condition: used, functionality: fully functional, For sale is a robust and fully operational roll forming machine for the production of corrugated and tile-profile sheets made of aluminum. The system is suitable for the continuous production of various profile geometries. The machine was commissioned in October 1990 at Leichtmetallwerk Nachterstedt GmbH and impresses with its solid industrial design. Thanks to the integrated profiling line, the cutting and embossing tool, and the automatic stacking device, an efficient production process is possible, from the coil to the finished profile. The system is particularly designed for the production of roofing profiles, tile profiles, and aluminum corrugated profiles, thus offering a versatile range of applications in the field of sheet metal processing and profile manufacturing. System components: - Coil - Profiling line - Cutting and embossing tool - Automatic stacking device Currently produced profiles: - Tile profile 33/175; material thickness: 0.6 mm - Asymmetrical corrugated profile 33/175; material thicknesses: 0.6 mm and 0.7 mm - Aluminum corrugated profile 28/125; material thicknesses: 0.7 mm, 0.8 mm and 1.0 mm Condition & Inspection: The system is ready for production, is in fully operational condition, and is currently still used for production. This allows the functionality to be verified on-site if desired. The roll forming machine can be inspected at any time by arrangement at our location in Krostitz, Hilchenbacher Straße 2A. Fgsdpfxsy Sxhwo Al Ssh The system is immediately available and ready for sale. We will gladly provide further technical information, images or details upon serious interest.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Fjdszx Rz Hepfx Al Segh Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 3 mm, total width: 2,000 mm, total length: 14,130 mm, total height: 2,170 mm, input voltage: 380 V, power: 40 kW (54.38 HP), overall weight: 13,680 kg, We offer this used Huachen ROLL FORMING MACHINERY HC50-60X80-100-120 profiling line, manufactured in 2024. Model: HC50-60X80-100-120 Dimensions: 14130 × 2000 × 2170 mm Serial Number: 202408976 Power: 32.5 + 7.5 kW Weight: 13680 kg Manufacturing Date: 2024-08-12 Voltage: 380 V Frequency: 50 Hz Standard: YB/T 4249-2011 USED OMEGA PROFILING MACHINE – As good as new Technical features: • Production of Omega profiles 80 – 100 – 120 (see technical data sheet) • Automatic Omega profile changeover • Maximum workable thickness: 3 mm • In-line hole punching • Hole punching on the profile height • Complete profiling line, ready for use • High profile precision and repeatability Machine condition: • Limited use: only 10 months of operation • Perfectly functional • Regular maintenance • Excellent mechanical and aesthetic condition Advantages: • Reduced setup times thanks to the automatic changeover • Ideal for medium to high production volumes • Excellent value compared to purchasing a new machine Available for inspection and testing. Technical documentation available. Fjdsz D Dxgjpfx Al Sogh Attractive price.

Condition: used, Year of construction: 1996, type of input current: three-phase, sheet thickness (max.): 1 mm, total width: 2,000 mm, total length: 20,000 mm, total height: 1,900 mm, shaft diameter: 40 mm, input voltage: 380 V, working width: 300 mm, input current: 40 A, spindle motor power: 15 W, coil weight: 1,500 kg, overall weight: 10,000 kg, We are offering this used Dallan T4R-10-300 punching and profiling line / roll forming machine, manufactured in 1996. Manufacturer: DALLAN Type: T4R-10-300 Serial number: 964310.30 Year of manufacture: 1996 Machine specifications: Sheet width: max. 300 mm Sheet thickness: ± 0.5 – 1.5 mm Number of stations: 16 Number of cassettes: 5 Configuration: Double coil, rolling, punching module, roll forming line (16 stations), flying shear Roller diameter: 40 mm Fodjztcgqspfx Al Sjgh Punching unit: 8 punching units Coil: Double coil (rolls max. 1,500 kg) Current configuration: Omega profiles Dimensions: 20 x 2 x 1.9 meters Weight: ± 10,000 kg If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, REF: MM6428 1 x PFM flow wrapper with peg and chain infeed conveyor and painted mobile frame.  Manufacturer - PFM Packaging Machinery S.p.A. Model - Swift.  Date of manufacture - 2011.  Electrical requirements - 230 V / 50 hz / 1 phase. Power - 14.5 Amps / 3.1 kW. Overall dimensions - 4150mm long x 950mm wide x 1950mm high. Fgedsy Unmuepfx Al Soh Adjustable folding box - up to 90mm wide.  Can wrap using clear or printed film. Supplied without the adapted infeed system, will be back to the standard infeed system. The PFM Swift is a horizontal flow-wrap machine with rotary crimp jaws, designed to wrap at speeds of up to 100 bags per minute. An extremely versatile, compact and reliable machine, the Swift will accomodate a wide range of products, with its standard adjustable forming box, providing the solution to quick and efficient size changes.

Condition: used, Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW Fgedpfx Aeb Uhrmel Seh -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Condition: used, Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership Fgjdpfx Alsb Uhukj Ssh -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Condition: used, Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable Fgodpfx Aeb Uhu Asl Ssh -with counter -Dimensions: 1300/780/H620 mm -Weight: 260 kg

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine. Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Fgodpfx Alexd Ubns Soh Note 🗒️ No printer.

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. Fsdpfxoz D Efns Al Ssgh (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: excellent (used), Year of construction: 1994, Weinig 925 Rondomat profile knife grinder Stock code: 15443 Price: request for quotation $ Subcategory: Knife grinders Producer: Weinig Model: 925 Condition: used Tag number: 15443 Machine type: Grinding machines UMCC: G6775 Producer: Weinig Model: 925 Rondomat Year: 1992 Serial number: 925-438 Fgoden Ut Slspfx Al Soh Description: Weinig 925 Rondomat profile knife grinder We offer turnkey services with this machine. Printable page Get a quote General technical data Shaft length 9-1/2 inches Maximum tool diameter 9 inches Motor 1.5 HP, 220/440 V 8-7/8 Maximum wheel diameter Variable grinding wheel speeds: 1700, 2000, 2250, 2800 rpm Relief angle for back relief: 15 - 45 degrees Axial: 0 - 10 degrees Cooling liquid

Condition: used, Second-hand Leitz Variform profile cutter for woodworking applications. Technical data: - Blade: Z4 - Flight circle (ø): 165 mm - Bore: 40 mm - Marking: MEC Fsdozr D Sropfx Al Sogh - Length: 46 mm - Material: Steel

Condition: excellent (used), Schlebach SPA Profiling machine for continuous production of angle standing seams with a seam height of 25mm. Fgsdpfszyy Rgsx Al Seh The machine is equipped with: ✅ a hydraulic separating device for precisely perpendicular removal of the forming tools after profiling. ✅ millimeter-accurate length measurement ✅ a control system that includes length and quantity settings ✅ a collection container for waste ✅ a 400V power connection

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. Fjdpfoxghngox Al Sogh As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, Cassettes + cutters for a roll forming machine used in the production of trapezoidal sheet metal. Two different profiles can be produced. H = 158 mm x W = 750 mm H = 153 mm x W = 840 mm Details can be found in the photos. Processable sheet metal: Aluminum + steel in 0.75 - 1.5 mm Consisting of a total of: - Cassette 1 for profile 153 and 158 - Cassette 2 for profile 153 and 158 - Cassette 3 for profile 153 and 158 - Cassette 4 for profile 153 - Cassette 4 for profile 158 - Cassette 5 for profile 153 - Cassette 5 for profile 158 - Cassette 6 for profile 153 - Cassette 6 for profile 158 - Cutter for profile 153 - Cutter for profile 158 Fgodezvgwfopfx Al Ssh All items come from ongoing production; the sale is due to a product changeover. This includes only the cassettes + cutters, without drives, coils, shears, etc. Total weight: approx. 86,000 kg

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply Fjdozzyd Aopfx Al Sjgh * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: excellent (used), Year of construction: 2016, VDL UVA Lima 250 High speed VFFS Fedpfxez It I So Al Sjgh Serial: 2016542 2016, Stainless, high speed continuous motion vertical form seal bagging machine, jaw width 320mm, up to 200 bags per minute, Allen Bradley HMI touch panel, with Becker vac pump and Markem Smartdate X40, comes with four different sets of forming shoulders a trolley of additional parts and a flighted elevator outfeed conveyor, 3Ph

Condition: good (used), DREISTERN P3.100 Profiling Line – 16 driven stations and 2 × 18.5 kW Short title for platforms with character limits: DREISTERN P3.100 Profiling Line, 16 driven stations Fodpfx Alezzyd Nj Segh Platform data * Machine type: Profiling line / Roll forming line * Manufacturer: DREISTERN * Model: P3.100 * Year of manufacture: not known / to be added before publication * Condition: used, dismantled * Control system: not available For sale is a DREISTERN profiling line, type P3.100, with 18 stations, 16 of which are driven. The line is equipped with 16 profiling stands, 50 mm working shafts, quick-change plates, and two Bosch motors, each with 18.5 kW. The modular design with mechanical quick clamps and quick-change plates is suitable as a solid mechanical base for customer-specific roll forming applications. A constructive expansion with additional stations is possible. According to the previous operator, the line operated flawlessly until it was dismantled at the customer's site. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine bed and drive * Production direction: from left to right * Axle distance: 330 mm * 18 stations in total * 16 stations driven, with 16 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping * 2 × Bosch motor, each 18.5 kW Profiling stands * Number in scope of supply: 16 pieces * Tool width per stand: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with groove * Fixed lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:7.5 * Lower/upper shaft ratio: 1:1 Scope of supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Special straightening device * 16 gearboxes * 16 profiling stands * 2 Bosch motors, each 18.5 kW * 32 universal joints

Condition: excellent (used), Year of construction: 1998, control type: CNC control, controller model: SIEMENS TOUCH, number of rollers: 3, overall weight: 15,000 kg, total length: 2,600 mm, total width: 2,200 mm, total height: 2,300 mm, Profile bending machine FACCIN - RCMI 180 MACH-ID 9828 Make: FACCIN Type: RCMI 180 Control: SIEMENS TOUCH Fedoz Iwy Sepfx Al Sogh YOP: 1998 Power 30 kw Hydraulic side supports 3 roll driven  Touchscreen SIEMENS Panel with S7 SPS  Laser measuring device for Radius  Set Universal rolls hardned Set Tool points  Horizontal and vertical:Horizontal Shaft Ø: 190mm Number of rolls: 3 Stroke X-Axis: 500mm Resistance moment: 360CM³ Working speed: 2000 - 5000mm/min. Length: 2600mm Width: 2200mm Height: 2300mm Weight: 15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. Fsdpfx Ajzt Ni Eel Sogh We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Year of construction: 2026, condition: new, functionality: fully functional, travel distance X-axis: 3,010 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 260 mm, overall weight: 2,300 kg, feed rate X-axis: 55 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 12, swivel angle A-axis (max.): 180 °, number of axes: 4, ACROLOC SBZ 200 | 4-axis CNC profile machining center with German CAM software camQuix The ACROLOC SBZ 200 is a powerful CNC profile machining center for the professional and economical processing of aluminum profiles. The machine was designed for industrial use and combines high processing speed, precision, and flexibility with modern and user-friendly programming. A particular highlight is the German CAM software camQuix from camProx. It was specifically developed for the processing of aluminum profiles and offers clear 3D programming with DXF import, parametric machining, automatic tool assignment, intelligent clamping management, and collision detection. This allows machining operations to be conveniently prepared, visualized, and checked for potential collisions even before production. This reduces setup times and increases process reliability. Technical highlights: 4 interpolated CNC axes Spindle swivel range from -90° to +90° High-performance electric spindle with 5 kW Maximum speed 24,000 rpm Tool interface HSK F50 Automatic tool changer with 12 tool positions Additional position for a larger tool 6 automatic profile clamps Travel range X-axis 3,010 mm Travel range Y-axis 330 mm Travel range Z-axis 260 mm Speed X-axis up to 55 m/min Speed Y-axis up to 40 m/min Speed Z-axis up to 30 m/min Machine enclosure Industrial and robust machine construction Fodpfezugtwjx Al Segh The SBZ 200 enables milling, drilling, threading, pocketing, slotting, and free-form contour machining on aluminum profiles. Thanks to the 4 interpolated axes and the pivoting spindle, profiles can be machined from different angles without having to manually realign the workpiece for each machining side. The 6 automatic profile clamps ensure secure and stable workpiece clamping. In conjunction with camQuix, clamping positions are already taken into account during programming and included in the collision detection. The ACROLOC SBZ 200 is particularly suitable for window and facade construction, doors and portal systems, mechanical engineering, vehicle construction, and for general industrial aluminum profile machining. An interesting alternative in the premium segment With 4 interpolated axes, 24,000 rpm, HSK F50 spindle, automatic tool changer, 6 automatic profile clamps, and especially the German camQuix CAM software, the ACROLOC SBZ 200 offers an interesting alternative to established profile machining centers from Elumatec, Emmegi, Pertici, and Mecal. A significant advantage is the complete package of modern machine technology, powerful German CAM software, and direct technical support from ACROLOC. Inspection and demonstration are possible by appointment. Upon request, customer-specific profiles and concrete machining tasks can also be considered during the demonstration.

Year of construction: 2022, operating hours: 1,700 h, condition: excellent (used), functionality: fully functional, cutting length (max.): 6,500 mm, machine/vehicle number: C127713, Twin head cutting-off machine, for cutting aluminium and PVC bars in various thickness and angles. Fsdezb I N Iopfx Al Sjgh

Condition: excellent (used), Year of construction: 1993, control type: NC control, actuation type: hydraulic, number of rollers: 3, shaft diameter: 120 mm, overall weight: 6,400 kg, total length: 2,900 mm, total width: 2,130 mm, total height: 2,130 mm, Profile bending machine HAEUSLER - HPR 13 MACH-ID 9800 Make: HAEUSLER Type: HPR 13 Year: 1993 Set universal rolls Horizontal and Vertical positioning Hydraulic machine Scales for position side rolls Horizontal and vertical:H + V Shaft Ø: 120mm Number of rolls: 3 Stroke X-Axis: 0 - 300mm Capacity flat: 130 x 20mm Capacity Tube: 114,3Ø x mm Fgjdpfxezxw E Eo Al Sjh Capacity bar: 70 x 70mm Working speed: 0 - 5000mm/min. Length: 2900mm Width: 2130mm Height: 2130mm Weight: 6400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!