Used Profiling for sale (5,835)

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023 Hsdpfx Aqeyw Rzasujfn

Year of construction: 2022, operating hours: 1,700 h, condition: excellent (used), functionality: fully functional, cutting length (max.): 6,500 mm, machine/vehicle number: C127713, Twin head cutting-off machine, for cutting aluminium and PVC bars in various thickness and angles. Hfsdszb I N Iepfx Aqujn

Condition: used, Year of construction: 2016, A versatile 2 head edge sander for solid timbe, mdf, chipboard, etc 1 - 80mm wide x 2450mm sanding belt with 2 speeds 700 / 1400rpm x 1.0 / 1.5kw with timed entry / exit, mechanical oscillation, and pneumatic belt tensioning 2 - Abrasive wheel sanding unit with automatic compensation for wear Sanding units can be used vertically or horizontally and have mechanical digital readouts for setting Manually adjustable top pressure beam with rubber rollers Track feed with variable feed speeds 1 - 18m/min Touch screen controller Hjdozd Uzhjpfx Aquofn Year - 2016 CE.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, bending force (max.): 42 t, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending force: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Ram stroke: 300 mm Ram width: 200 mm Hfsdpfx Asz Nipcsqujn MACHINE DETAILS Motor power: 4.0 kW Dimensions and weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Unladen weight: 1,000 kg EQUIPMENT Documentation CE marking

Condition: used, Width: 60 cm Complete roll forming line equipped with tools for the production of a new type of industrial gutter for galvanized steel/stainless steel CE compliant Uncoiler capacity: 2 metric tons Maximum width: 600 mm Coil inner and outer diameters: 508–920 mm Hydraulic claw extension: 460 > 640 mm 4 kW Roll Forming Line Type H 18 stations Maximum width: 600 mm Maximum thickness: 0.8 mm Shaft diameter: 60 mm Maximum center-to-center shaft distance: 300 mm Siemens Simatic touchscreen control + Ethernet connection 7.5 kW Hydraulic shear Force: 5 metric tons Hfsdpfx Ajz R S T Uequen Condition: machine has seen very little use Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Thursday 5 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 3 November Pickup days are on: - Tuesday 10 November - Thursday 12 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Hfodpozuzpyefx Aqujn Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: used, Starrett Sigma HF600 Horizontal Floor Standing Optical Comparator 3 axes DRO Quadra Check 200 Hsdpfx Ajzy Itpequjfn Joy stick control lenses 50 , 20, 10, 20, 100. tail centres

Condition: used, functionality: fully functional, Year of construction: 2013, Sahinler HPK 200 Hydaulic section and pipe bending machine Mil and Shaft Diameter: 200mm Hfjdsw D Uqxopfx Aquon Tool and Roll Diameter: 900mm Working Speed: 2-5 m/min Motor Power: 30 kW Bending capacity x15x4 273x5.6 / 10000 mm Diameter biggest roll 9"x6,3 / 4000 mm Diameter top roll 650 mm Diameter upper roll 650 mm Roll capacity section - 3 200x200x18 / 5000 Shaft diameter 200 mm Top roll x15 with prebending min.120x120 / 3000 mm Voltage 3x400 V Working speed 2-5 m/min Power Power max. 30000 W Height 2300 mm Length 2400 mm Width 3400 mm Weight15000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, - The machine was purchased new in 1988 and has been in our possession ever since. Hfsdpez Hcp Njfx Aquon - The visual condition can be seen in the photos. Considering its age and the existing paint condition, the mechanical condition is satisfactory. - The machine is operational and can be demonstrated by prior arrangement. - The machine has been technically modified. This provides a second, higher speed for processing smaller pipe dimensions. - A protective frame has been manufactured to protect the machine, which helps to minimize external damage. The protective frame also has two mounts that can be used to prepare or mount various profiles. - The control panel has been expanded. As a result, up to 10 set values can now be pre-programmed. - The existing standard tools are included with the machine. All arbor diameters are 60 mm. - The original operating manual is available. - The scope of delivery includes a comprehensive selection of tools for various applications, including: Round tubes Flat bars for heavy and light arbors Square profiles Rectangular tubes T-profiles Angle irons Diagonal tools - A total of 15 pallets of tools belong to the machine (see photos and description). - The machine will only be sold together with the complete set of tools. - The price is ex works. The dismantling, loading, and collection of the machine must be carried out by the buyer himself or by a commissioned forwarding agent. Technical specifications according to available documentation. Subject to prior sale.

Condition: not inspected (used), Aluminum profiles, rail profiles, length up to 1,545 mm, in stock on pallets, unused, approximately 20 tons. Hsdpfx Aoz R Nxbjquofn

Year of construction: 2018, operating hours: 3,380 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040950, 4-assige CNC-profielbewerkingsmachine: - Bouwjaar 2018 - Draaiuren 3.380 uur - Windows 10 operating system - Werklengte 7,6m - Lengtemeetsysteem profielen Hjdpsz Eqpnofx Aquefn - Barcodescanner - Toolset Machine is werkend te zien, demontage door koper. Per direct beschikbaar.

Year of construction: 2013, operating hours: 6,044 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040693, CNC-profielbewerkingsmachine met 4 assen: - Bouwjaar 2013 - Draaiuren: 6.044 uur - Bewerkingslengte: 7,6 m - Gereedschapsset Hfodpfjz Eqxcjx Aqujn De machine kan ter plaatse in werking worden getoond; demontage is voor rekening van de koper. Machine komt beschikbaar begin decemeber 2026.

Condition: good (used), The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Hfedpfjz N Smdex Aquon

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Hsdpjz Nhliefx Aquefn Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: used, Year of construction: 2004, machine/vehicle number: 2161, For sale is a Schüco LKF 2600 machine for processing aluminum and steel profiles, manufactured in 2004. The machine is particularly suitable for the efficient processing of long profile lengths. The 3-sided processing over a processing length of 2,600 mm allows complex milling patterns to be incorporated into door and frame profiles without having to remove the profile from the clamping device. The pneumatic profile clamping system with four adjustable clamping cylinders ensures secure fixation of the profiles during processing. The pneumatic 180° rotation allows the profile to be conveniently positioned for processing the opposite side. A special advantage of the machine is the pneumatic rotation of the clamped profile by 180°. This allows processing on multiple sides to be carried out comfortably and precisely. Technical data: • 3-sided processing with a processing length of 2600 mm. This allows the operator to mill the milling pattern, e.g., of a 5-point locking mechanism, into a door profile without having to remove the profile from its clamping device. • During processing, the speed of the milling cutter can be adjusted to the profile. • 1 vertical milling spindle Hfodpfx Aqjz Spttjujn • Pneumatic rotation of the profile by 180° • All intermediate angles can be adjusted via a clamping device • Pneumatic profile clamping with 4 adjustable horizontal clamping cylinders • The working head is lowered manually and pneumatically fixed at the working height • Copying templates along the entire length of the machine

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. Hfodpfxoy E N Hde Aqujn 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Hedpfx Aqoz Rl T Hjuofn Passage height: max. 100 - 200 mm Passage width: max. 450 mm Effective contact length: 2400 mm Haul-off speed: stage 1: 0.5 - 4.0 m/min., stage 2: 1.0 - 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function

Condition: used, Second-hand Barth RFM 320S round profile and chamfering machine for the professional rounding and chamfering of edges on timber workpieces. Hsdjz N Hg Eepfx Aquefn The workpiece is first pre-milled and then sanded. Technical data: - Bevel: 45° to 16 mm - Radii: 2, 3, 4, 5, 6, 8, 10 and 12.5 mm - Grinding motor: 0.75 kW - Feed: Bernardo Type MX48

Condition: good (used), Siegmund System Perforated Table including Silverline Profile Processing Station For sale is an extremely robust, combined industrial workstation for metalworking, jig and fixture construction, or precise profile manufacturing. The system consists of top-quality components: 1. Siegmund System Perforated Table (base) - High-precision, extremely warp-resistant, and solid welding and clamping table from the world market leader, Siegmund. Hjdeztawgepfx Aqujfn - The perforated system (including perforation on the side panels) allows for flexible and repeatable positioning of stops, clamping bolts, and angles. 2. Silverline Clamping & Processing System (assembly) - Solid upper structure with precise linear guides for longitudinal movement. - Two parallel-arranged, yellow motor heads (milling/drilling units) for simultaneous or staggered processing steps. - Three heavy-duty, horizontal clamping bars securely fix workpieces from the rear against the stops, ensuring material protection. 3. Pneumatic Comfort Control - Ergonomic control panel on the front with a 5-way numbered lever control. - Selective control of individual pneumatic cylinders. - Integrated analog pressure gauge and safety emergency stop switch. - Powerful, central electric motor for the mechanics/hydraulics. Dimensions: Tabletop: 2000 x 1000 x 200 mm Table height: approx. 900 mm, height adjustable Overall dimensions: 2420 x 1400 x 1580 mm This offer is for one Siegmund System Perforated Table. "Everything from a single source: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom Hfodpfx Aszv Eaxsquen 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, power: 148 kW (201.22 HP), filling opening width: 1,200 mm, filling opening length: 6,000 mm, number of blades: 150, rotational speed (max.): 80 rpm, rotor diameter: 390 mm, rotor width: 1,200 mm, Genox J1200 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 148kW combined shaft motor power (4 x 37kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 80rpm shaft speed. Four 1200mm wide x 390mm diameter rotors with 150 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Hsdpfjz Hy Enjx Aqusfn Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture an 800mm version of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: A2000006, CNC machining center for aluminum window profiles, Fom Industrie FMC 475, with 5 controlled axes and a 7 m working length, manufactured in 2026. Options: Cut & Separate module with a mechanical keyboard and printer, 300 mm saw blade, barcode scanner with data import, UPS, and tool set A2 / HSK F63. Hodpfez Nghpex Aqujfn

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Hfjdjzytmzjpfx Aquen Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, power: 258.5 kW (351.46 HP), filling opening width: 2,000 mm, filling opening length: 7,000 mm, number of blades: 350, rotational speed (max.): 50 rpm, rotor diameter: 635 mm, rotor width: 2,000 mm, Genox J2000 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 240kW combined shaft motor power (75Kw + 3x55kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 50rpm shaft speed. Four 2,000mm wide x 635mm diameter rotors with 350 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. Hfodpfx Aqoz Hy Dwsusn We also manufacture a 800mm & 1,200mm versions of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: like new (used), functionality: fully functional, Used Ercolina CE40MP2 profile rolling machine for sale. We are offering a used Ercolina CE40MP2 profile rolling machine in good and working condition. The machine is suitable for rolling and bending various profiles and tubes. It can be used both horizontally and vertically. Technical specifications: * Number of driven rollers: 2 * Shaft diameter: 40 mm * Standard roller diameter: 165 mm Hfjdpfoz Hqi Djx Aqujn * Capacity for round tubes: up to approx. 60 × 2 mm * Capacity for angle profiles: up to approx. 38 × 38 × 5 mm * Rolling/bending speed: approx. 2.5–5 m/min * Motor power: 0.75 kW * Top roller adjustment: manual * Machine position: vertical and/or horizontal * Power supply: 400 V * Control: electric foot pedal * Standard rollers: included * Extra rollers: 1/2", 1 1/4G and 1 1/2G The machine is available immediately and can be inspected and tested by appointment at our location.