Used Profile Machining Center for sale (69,760)

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø Psdpjvd Dftofx Almspt 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm Ppodeu Idnmopfx Almst range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: good (used), Year of construction: 2009, functionality: fully functional, Elumatec SBZ 140 Extended Length Version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light curtains Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer Max milling diameter: 80 mm Max saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilt/rotation axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (varies with configuration) Control: 4-axis CNC system, PC control, color display, USB & network connectivity. Software: eluCam. Automatic material clamps; automatic positioning via index pins Psdpfx Aex E Ahzjlmept Pendulum/shuttle operation (two work zones), improving production throughput time. In addition to milling and drilling, also tapping, sawing, and profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for business customers).

Year of construction: 2012, condition: excellent (used), CNC profile machining center Elumatec, type: SBZ122/33, year of manufacture: 2012 Psdpfxsy Rfx Hj Almjpt Technical data: Working area X – 3850 mm, Y - 350, Z - 280 mm Electric spindles 6 kW - max. 24000 rpm Tool holder HSK -63 F Spindle in very good condition Spindle operating hours: 1634 h Tool changer: 1 position for angle head, 5 x tools Work table with 4 clamps and positioning (automatic) Pneumatic clamping system Light curtain Mobile operator terminal Freestanding control panel Barcode scanner USB port Operating software: Windows 7 Embedded Production software: EluSoft, EluCAM Numerical control: Ferrocontrol - Gateway Protective fence on the left and right with door Automatic and centralized lubrication of the linear guides Weight approx. 1900 kg Total connection value approx. 14 kW Machine dimensions 4,670 x 2,000 x 2,540 mm Space requirement 5,665 x 3,000 x 2,540 mm (Subject to changes and errors in the technical data, as well as prior sale)

Condition: ready for operation (used), A 4-axis CNC bar machining center Elumatec is available. Version: 7.8m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible. Ppjdpfjy Aafxex Almot

Year of construction: 2010, condition: used, functionality: fully functional, SBZ 122/33 Profile Machining Center 3.8m, WK 4x90°, eluCam Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to protect the profile's visible surface. Latest generation CNC 3-axis control with industrial PC based on Windows XP Pedjw Dzagepfx Almopt 15" flat-screen monitor and 2 USB ports for online connectivity, barcode scanner, and label printer. Network connection: RJ 45 10/100 MBit User-friendly input via eluCam 3D visualization Rapid positioning of the machining unit (up to 60 m/min) on the X-axis thanks to robust and low-wear direct drive. High-resolution absolute encoders eliminate the need for axis referencing. Technical Data: X-axis travel: 3800 mm Max. travel speed: 60 m/min Y-axis travel: 350 mm Max. travel speed: 30 m/min Z-axis travel: 280 mm Max. travel speed: 30 m/min Max. machining length with end machining left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Milling spindle speed: 1 – 24,000 rpm Milling spindle output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard positions, 1 position for rotary angle head) Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool positions (without tools) Safety fences left and right Light barrier at the front 4 horizontal pneumatic material clamping devices Automatic clamp positioning 1 foldable material stop Central chip extraction with chip box Dosing spray device Milling spindle with integrated rotation unit for angle head Rotary angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Important: The profile machining center is factory-equipped with a front light barrier system as standard. Lateral protection is provided by safety fences. Any necessary rear protection must be provided on-site or ask us for a quote for safety fences. Includes: Length measurement for profile bar Additional automatic tool changer Various used tool holders and milling cutters

Condition: ready for operation (used), Year of construction: 2007, A Schüco roll crimping machine for joining aluminum half-shells with polyamide insulating bars in thermally broken profiles is available. Profile throughput speed: approx. 34m/min, max. profile installation depth: 250mm, max. profile height: 400mm, max. insulating bar spacing: 300mm, machine dimensions X/Y/Z: approx. 900mm/900mm/1650mm, weight: approx. 750kg. Including infeed and outfeed. Documentation available. An on-site inspection is possible. Ppedpsyugm Ejfx Almst

Condition: new, Year of construction: 2026, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic three-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining capabilities. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Ppsdpey Afxdefx Almst Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear workspace safety with protective fence and access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Ppedpfx Alsxr N Rmemjt Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: ready for operation (used), Year of construction: 1998, Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible. Ppodeuzlfaepfx Almst

Condition: ready for operation (used), Year of construction: 2018, Machining sides: 3, workpiece materials: aluminium/steel, travel X: 4000mm, feed rate: 120m/min, A-axis: +/-110°, spindle speed: 18000rpm, tool holder: SK30, tool positions: 8, max. profile dimensions X/Y/Z: 4000mm/250mm/190mm, machine dimensions X/Y/Z: approx. 5750mm/2100mm/2350mm, weight: approx. 4000kg, control: Mecal. Documentation available. On-site inspection is possible. Pedpfx Aoyh Nv Holmjpt

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available. Ppodpstqfqxofx Almjt

Condition: good (used), Year of construction: 2013, Profile machining center Axis travel X-axis: 7430 mm Y-axis: 1320 mm Pedsvy E Ibopfx Almopt Z-axis: 500 mm A-axis: +/-90° Working areas X-axis: 7460 mm Y-axis: 650 mm Z-axis: 250 mm 8 clamping elements Automatic tool magazine with 8 places in a protected housing, for drilling, milling and thread cutting tools, angle head and disc milling cutter, max. Ø 200 mm, + 2 places for 2 angle heads Tool holder ISO 30 In pendulum operation (2 zone machining) the working stroke per zone is limited to 3500 mm

Condition: new, Machining center with 4 CNC-controlled axes For machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame made of robust welded construction, stress-relieved annealed, with hardened linear guides Protective cabin over the entire machining length Pneumatically operated safety door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication for tools, including fill level monitoring Tool magazine: 5 positions, left side in the machine bed, for accommodating drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm Automatic positioning via device on the Z axis Workpiece positioning: One pneumatic reference stop on each side (left and right) on the A axis Travel ranges: X axis 3500 mm Y axis 370 mm Z axis 348 mm A axis ±90° Travel speeds: X axis 70 m/min. Y axis 30 m/min. Z axis 30 m/min. A axis 60°/sec Maximum working areas: X axis 3270 mm Y axis 250 mm at 0°, 116 mm at ±90° of the A axis Z axis: 170 mm at 0°, 200 mm at ±90° of the A axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-side processing by swiveling the A axis 90°-0°-90° End machining using disc cutter Psdpfxewrcwpo Almopt Operating modes: One profile bar over the entire machining length Two profile bars with split machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with fill level monitoring Operation: 18.5” touchscreen Mouse + keyboard Connection data: Electrical: 400V/50Hz (3-Ph+N+PE), 16 A, Delivered without power cable Pneumatics: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg Included: Graphical programming software CM3D/CAD3D Barcode reader Additional network connection including remote maintenance/diagnostics for 1 year

Year of construction: 2018, condition: good (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm Pedpfox Diqwex Almept 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Year of construction: 2014, condition: excellent (used), Elumatec SBZ 130 is a 3-axis profile machining centre designed for efficient processing of aluminium, steel, and stainless steel profiles. All operations, such as milling, drilling, and tapping, are performed on a stationary profile, which protects its surface. Axes: 3-axis control, with tool spindle as an additional axis. Machining length (X-axis): 7200 mm Pedpeyt H Uyjfx Almopt Travel (Y-axis): Typically 485 mm (max. 60 m/min). Travel (Z-axis): Typically 340 mm (max. 60 m/min). Spindle speed: Standard 6000 rpm or optionally high-speed spindle (18,000 rpm). Spindle power: 5.5 kW. Tool magazine: Integrated 8-position turret or 4 angle heads, ensuring short tool changeover times. Control: Windows operating system with eluCam software. 18.5” PC panel with USB ports and network connection. Clamping system: Automatic positioning of pneumatic clamps. Compressed air supply: 7 bar. MACHINE: Prepared tooling dedicated for PVC+STEEL machining: - tool holders, - reducer for steel machining, - special tools with chip breaker, - dedicated programs for machining door profiles,

Year of construction: 2002, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 1300030418, For sale: CNC machining center for aluminum and steel profiles, Elumatec SBZ 130. The machine is company-owned and located in an indoor production facility, protected from external influences. Specifications and condition: Year of manufacture: 2002. Status: Currently not operational (requires pneumatic system servicing). History: The machine was in active use until 2014, after which it was stored indoors. Pedpfx Aljyz Dvremept Electronics: The computer is fully functional, the machine can be started for system testing. Required investment: Replacement of all pneumatic hoses and inspection/servicing of control blocks. Advantages: The machine is mechanically sound and has not been kept outdoors. Ideal opportunity for companies with technical capacity for overhaul or those seeking a reliable base for modernization.

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 6280028128, Machine is provided "free loaded truck". No dismantling and loading costs! TECHNICAL DETAILS Max. profile cutting width: 320 x 160 mm Min. profile cutting width (depending on gripper position): 30 x 10 mm Raw material system Length of the raw bar system: 7,600 mm Finished part system Finished part length: 3,500–4,600 mm Kurt cell Kurt cell (50-150/150-350): optional Feed system Shortest raw bar length: 1,500 mm Swing arm selection: 5 (option 9) Support plate: 10 (over 120 mm 5) Infeed Servo drive: linear Gripper adjustment electric: Y/Z Gripper guide: standard Remnant piece measurement: optional Remnant piece processing: fully automatic Processing station Number of axes: 5 Milling spindles: 8 (can be prepared) Saw Number of axes: 3 Saw blades (diameter): Ø 550 mm, optional Ø 650 mm Saw angle: 22.5°–157.5° (swivel) Notch cuts: standard (from above) Pjdpovvu S Iefx Almopt Outfeed chip carriage Number of axes: 1 Outfeed conveyor Lifting station: yes Swing selection: 5 Width of outfeed conveyor: 4,000 mm MACHINE DETAILS Dimensions: 20 x 3 x 4 m Weight: 8.8 t Connection power: 39 kW Operating voltage: 3/N/PE 400 V EQUIPMENT - Feed magazine - Loading transport - Processing station with milling unit, saw unit and clamping blocks - Unloading transport of profiles (removal gripper) and unloading conveyor - Acoustic protection cabin - Control panel on the soundproof cabin - Control cabinet - Fencing and protective doors

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, For economical and efficient machining of aluminium, plastic and thin-walled steel profiles All machining processes such as milling, drilling and thread cutting take place on a stationary profile, protecting the profile surface Improved work results thanks to the use of intelligent control technology Fast positioning of the machining unit at up to 60 m/min thanks to the use of dynamic servo drives Thread cutting without compensating chuck Automatic clamp recognition and positioning Automatic tool magazine with four tool shelves (without tools) Modern, 3-axis control Ergonomic work thanks to the use of a modern inclined bed No need for a reference movement of the axes thanks to the use of absolute encoder-based systems Collision avoidance thanks to automatic clamp recognition and positioning Power-Torque milling motor with closed speed control ensures short start-up and deceleration times spindle Certified, drive-integrated safety functions Low power consumption thanks to intelligent control technology Increased energy efficiency thanks to the connection of axis drives between circuits Uninterruptible power supply (UPS) Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program entry via eluCam on the operator panel, even during machining Remote online maintenance Machine equipment Air-cooled 8 kW milling spindle, S1 Cabin for operator protection Four horizontal pneumatic clamps for clamping the material Material stop, left side HSK-F63 tool holder Minimum quantity lubrication High-performance coolant Manual control panel Depth gauge Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotating head HSK-F63 angle for two tools Green-line cooling unit for control cabinet with reduced energy consumption Barcode scanner Protective cabin, optionally with all-round closure Four clamps as standard. Expandable to eight clamps Right reference material stop for placing workpieces with overlength processing Additional stop for overlength processing on the left Length measurement on both sides Double clamp and additional accessories upon request Panel PC 18.5", i5 processor Panel PC 21.6", i7 processor Ppjdpfx Aljwgmyqemst Note holder Sound-absorbing hood Chip disposal using chip trays

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. Ppedpfx Alexc I Dgomjt As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: ready for operation (used), Year of construction: 2001, operating hours: 18,500 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller model: CNC OSP 100M, rotational speed (max.): 5,000 rpm, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS Travel range, X-axis: 700 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 700 mm Ppjdpfx Asy S S U Djlmjt Rotary table/B-axis: indexed in 1° steps, 360 positions Spindle speed: 25 - 5,000 rpm Type of input current: Three-phase Pallet size (2x): 500 mm x 500 mm Table size: 500 mm x 500 mm Table load: 800 kg Distance spindle nose to table surface: 150 mm - 850 mm Tool holder: MAS BT 50 Tool magazine (ATC): 60 positions, chain magazine Tool length max.: 450 mm MACHINE DETAILS Control: CNC OSP 100M Dimensions & Weight Dimensions (L x W x H): 5,500 mm x 3,160 mm x 3,300 mm Machine weight: 21,000 kg Spindle hours: 18,500 h EQUIPMENT Chip conveyor Coolant system Pocket filter system for internal cooling Spindle speed, continuously adjustable

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 5351126, controller model: Siemens 840D, number of slots in tool magazine: 42, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS Tool holder: SK-40 Tool magazine: 42 positions MACHINE DETAILS Ppodpfx Aley S S N Iomst Control system: Siemens 840D EQUIPMENT Tool breakage monitoring Filter unit: Knoll, type VRF 300/800 Chip conveyor: Knoll, type 340 K-1/100

Condition: ready for operation (used), Year of construction: 2002, operating hours: 9,675 h, functionality: fully functional, controller model: U100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, number of axes: 3, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS X-axis travel: 1,050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Main spindle: 12,000 rpm MACHINE DETAILS Control system: U100M Axes: 3 Tool changer (ATC): 32 SK40 Cutting time: 9,675 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Ppedpey S S Nnjfx Almjt Chip conveyor Coolant system Preparation for A-axis (4th axis)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 172822005, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Swivel axis A: ±120° Rotary axis C: 360° Rotary table diameter: 500 mm Spindle speed (max.): 18,000 rpm Rapid traverse rate, X-axis: 36 m/min Rapid traverse rate, Y-axis: 36 m/min Rapid traverse rate, Z-axis: 36 m/min Number of tool slots in the tool magazine: 24 Positioning accuracy: 0.01 / 300 mm Repeatability: ±0.01 mm MACHINE DETAILS Control system: Heidenhain TNC530i Coolant supply: 20 bar Dimensions & Weight Dimensions (L x W x H): 3,015 x 5,050 x 3,000 mm Total weight: 9,000 kg Type of input current: Three-phase Power: 60 kVA Frequency: 50 Hz Rated voltage: 400 V Number of phases: 3 + PE Rated current at full load: 100 A Short-circuit strength: 25 kA Maximum load current: 200 A Fuse protection / rated current: 80 A Operating hours Spindle hours: 6,940 h Program runtime: 7,686 h Machine operating hours: 17,193 h Control system operating hours: 19,880 h EQUIPMENT Pedpfsy S Ua Nex Almjpt Chip conveyor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 18275, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine from the production of highly precise components for CNC rotary tables. Not a job shop machine. TECHNICAL DETAILS Travel in X-axis: 650 mm Travel in Y-axis: 650 mm Travel in Z-axis: 650 mm C-axis: 360°/continuous High-speed spindle speed max.: 10,000 rpm Spindle taper: HSK-A63 Internal tool cooling possible Number of tool magazine positions: 120 Circular accuracy: 5 µm MACHINE DETAILS Control system: Siemens Sinumerik 840D Ppjdpfoy Rmz Aex Almst Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Dual pallet changer + storage tower with 6 positions for up to 8 pallets Note: The machine has been shut down by a qualified electrician and professionally prepared for transport.