Used Punching Device for sale (12,449)

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover Gsdpfxoxaaipj Aanebw - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz Gjdsxabrfjpfx Aanjbw - original instruction manual

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets Gbodpsxab Imsfx Aanow - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: like new (used), Year of construction: 2025, load capacity: 10,000 kg, Special price, used for 1/2 year, as new, with warranty Gbjdew D Rhajpfx Aanow Self-centering complete set, dual drive, synchronous with hand remote control, digital display, and foot control Diameter from 300 mm to 3500 mm Drive roller diameter 300 mm Dimensions: length: 1900 mm x width: 470 mm x height: 390 mm Continuously adjustable speed 200 – 1200 mm/min. Motor AC 380 V

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. Features: - Electro-hydraulic punch press with long reach - Material/sheet metal scraper - Very large material support table (!) * with adjustable depth stops - Continuously variable stroke adjustment - Freely movable foot switch, including protective cover - Side storage shelf - Assortment of punches and dies - Original operating instructions Gedpeznng Sjfx Aanjbw

Condition: ready for operation (used), Year of construction: 2015, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2015101, Size 60 x 76 cm, die-cutting machine with automatic registration and camera system. Gbedpozxf Hdsfx Aanow

Condition: new, diameter 200 mm Gedohuxbrspfx Aansbw height 105 mm weight of the machine ca. 25 kg dimensions of the machine ca. 400 x 280x 150 m

Condition: good (used), machine/vehicle number: 550C08, A used PEDDINGHAUS punching machine with a large stroke and a large support table with stops. Punching force: 45 tons. Stroke rate: 40 strokes/min. Stroke: 762 mm. Working height: 1110 mm. Gbodpfx Aaed Hxrtonew

Condition: like new (used), Year of construction: 2011, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 606411, overall weight: 3,100 kg, total height: 2,030 mm, pressing force: 125 t, total length: 2,000 mm, total width: 800 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 15 A, punching force: 125 t, cutting range angle steel at 45° (X-axis): 80 mm, cutting range angle steel at 90° (X-axis): 150 mm, cutting range angle steel at 90° (Y-axis): 150 mm, cutting range flat at 90° (X-axis): 600 mm, cutting range flat at 90° (Y-axis): 25 mm, cutting range round steel at 90°: 55 mm, cutting range square steel at 90°: 50 mm, sheet thickness (max.): 25 mm, Equipment: foot remote control, Multi 125 je več-funkcijski stroj za prebijanje do 25mm debeline, rezanje ploščatega jekla do 600x15 mm ali 380x25mm, rezanje profilnega jekla do 150x18mm, rezanja okroglih palic do fi 55mm, rezanja kvadratnih palic do 50x50mm, ter izrezovanja do debeline 13mm. Gbjdpfx Aasz D Tf Asnjw

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. Gbodpozmx Scofx Aanew In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, power: 2 kW (2.72 HP), warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, The Yawei HPML30510 is a combined laser punching and cutting system for highly precise and efficient sheet metal processing in industrial applications. The machine combines servo-electric punching with laser cutting, achieving high processing speeds while maintaining low energy consumption. Thanks to its robust construction, automated systems, and modern CNC technology, the HPML30510 is particularly well-suited for demanding series production. The machine offered here is a demonstration model, in stock, immediately available, in new condition, and is offered with delivery (within Germany), commissioning, warranty, etc. It includes a comprehensive set of tools. It can be tested under power. Operating mode: Servo punching / laser cutting Punching force: 294 (30) kN (t) Laser power: 3000W Godoz D Th Dspfx Aanobw Max. processing size (punching): 1600 x 3000 mm Max. processing size (cutting): 1500 x 2500 mm Max. material thickness: 6.35 mm (sphere) / 3 mm (brush) Max. punching diameter: 88.9 mm Stroke rate: 2000 cpm Punching frequency (1mm pitch): 700 cpm Punching frequency (25.4mm pitch): 400 cpm Accuracy (punching/cutting): ±0.10 mm Combined accuracy: ±0.15 mm Clamps: 4 pcs Tool stations: 38 pcs CNC system: Siemens 840Dsl CNC axes: 11 Max. sheet metal speed: 102 m/min Turret speed: 30 rpm Max. load: 180 kg Dimensions (length): 8000 mm Dimensions (width): 8000 mm Dimensions (height): 2300 mm Machine weight: 20000 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Vacuum lifter from Schmalz for handling flat materials with a suction cup. Maximum lifting capacity: 125 kg. Gbedpfez Nplkex Aanjw Schmalz model: MOD-VM-BASIC-125/250, BB-VM-BASIC-600-HI Adjustable suction cup, maximum dimensions: 1600 x 750 mm Suction cup diameter: 220 mm Vacuum pump: EVE-TR 4 AC 3 Operating lever Mounted on a stand with 4 wheels.

Condition: used, Press-fitting device for ceramic pins in rotor shafts Operating principle: The ceramic pins are fed to a testing station via a vibrating feeder and a pneumatic hose, where the position of any existing one-sided bore is checked. This is done using an optical sensor. Incorrectly positioned parts are conveyed to a collection container by a pneumatic slide. Correctly positioned pins are fed to the singulator of the press-fitting tool via another pneumatic hose. The actual press-fitting process is also carried out pneumatically with a roller bearing-guided plunger. First, a manually adjustable pressure p1 is used to ensure that the pin is not pressed too easily into the shaft. Then, with another manually adjustable pressure p2, the pin is pressed fully into the rotor shaft. A disk spring pack preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted, removed, and clamped into the tool by an operator. This process is secured by a light curtain. Gbsdpoib H U Dofx Aanow Design Self-supporting station, integrated into a complete system, for press-fitting ceramic pins and balls. Rotor shafts Diameter: 5 - 20 mm Length: 50 - 200 mm Ceramic pin Diameter: 3 mm Length: 5 +/- 0.2 mm Operating cycle Performance: 15 cycles per minute Safety Protective door with safety switch Light curtain, category 4 Emergency stop Airborne noise emission Continuous sound pressure level at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse: 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year of manufacture: 2003 Electrically adjustable work table Documentation and circuit diagrams are available. More press-fitting devices – new and used – can be found in our shop! International shipping costs available on request!

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment Gbedpfx Ajtxkunjansw -Manufacturer: WMW, thread cutting device type GSA 1 -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm -Thread cutting sizes: M2-M4 -Number: 1x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm -Weight: 0.7 kg

Condition: used, Rehsler TW HL4006D industrial chiller unit Gsdpfx Aasxg Hmnsnebw The Rehsler TW HL4006D is an industrial chiller unit specifically designed for cooling the high-performance Trumpf Haas HL 4006D laser. The system is designed to dissipate the waste heat generated during the laser process, thereby ensuring a constant operating performance. The unit is primarily used in automated production lines, often in conjunction with industrial robots, where the associated laser is used for welding highly reflective materials such as aluminum or copper. Technical data at a glance: The unit is characterized by the following performance parameters: - Cooling capacity/rated output: 11 kW. - Electrical connection: 400 V voltage with a current draw of 18 A. - Operating pressure: Permissible pressure up to 10 bar. - Protection class: IP54 (protected against dust and splashing water). - Temperature range: Suitable for ambient temperatures of at least 5 °C up to a maximum of 43 °C. “Everything from a single source: We will be happy to offer you suitable bank financing for your project.” You can find more new and used items in our shop! International shipping costs on request!

Condition: new, Year of construction: 2012, welding current 20 - 100 A cutting capacity max. 35mm mm open-circuit voltage 250 V Required air-pressure min. 4 bar connected load 20 KVA connected load frequency 400 V weight 0,7 kg Dimensions (LxWxH) 1,0 x 0,6 x 0,8 mm Plasma cutting machine with cart Gjdpfx Aasw En E Eenebw - Includes 7m hose package - Spare nozzles

Condition: used, Linear feeder / Vibratory feeder / Sorting device Vibratory linear feeder, vibratory hopper, dosing hopper, storage hopper Vibratory bowl feeder, bowl feeder Vibratory bowl, screw feeding system with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Year of manufacture: approx. 2000 Useful load: approx. 1.5 kg Gbedpfx Asxf Urvsanjw Oscillation frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W = 170 x 60 x 12 mm - Mounted track length 340 mm - Overall height with base plate and oscillating plate approx. 115 mm Required space L x W x H: 400 x 280 x 400 mm Weight: 9 kg Good condition

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. Gbedoxab Iyjpfx Aansw For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Gbjdpew Tri Nsfx Aansw Exact details can be found in the PDF.

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Gbedpfx Aaow Trkgenjw Exact details can be found in the PDF.

Condition: ready for operation (used), Garant HC 1 Height Measuring Device Measuring range: 600mm Gbjdpfx Aaoxv Amponow Dimensions: 240mm x 250mm x 1000mm (L x W x H) Weight: approx. 30 kg Calibration standard is not included in the scope of delivery. For further technical data, please refer to the images. You are welcome to arrange a viewing appointment. We are happy to organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and browse our other listings. All brand names and trademarks mentioned are the property of their respective owners and are used for identification and descriptive purposes only. Technical data may vary and errors in the description of the item are possible and reserved.

Year of construction: 2005, condition: excellent (used), Pneumatic punching machine. Godpfjff Apwex Aanobw

Year of construction: 1989, condition: good (used), Storage location: 2649 Manufacturer: Somet Type: SDJ 300 Year of manufacture: 1989 Machine number: K017 200 Measurable tool diameter: Ø 6 - 300 mm Gjdpfjiim Szox Aanjbw Measurable tool length: 40 - 500 mm Accuracy: 0.002 mm Accessories: 1x interchangeable collet ISO 40 1x interchangeable collet ISO 45 1x interchangeable collet ISO 50 1x test mandrel ISO 50 Dimensions: 1,000 x 600 x 1,850 mm Weight: approx. 0.3 t

Condition: used, T-Shape 3-in-1 Multi-System // Year of manufacture: 2020 T-Shape combines 3 powerful technologies that work simultaneously to promote collagen production and significantly reduce local fat volume and skin elasticity. It ensures a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness. - Skin tightening - Reduction of cellulite - Reduction of fat deposits - Reduction of circumference - Treatment after liposuction Gsdpfxerxri Sj Aanebw - Facelift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadrupolar, and hexapolar radio frequency signal. When the RF energy (radio frequency) comes into contact with the tissue impedance, heat is generated. With proper heating, the collagen-rich dermis is immediately denatured, and the fibrils contract and thicken. In response to the initial heat, new collagen is produced, and the skin appears tighter, firmer, and younger. Vacuum Suction T-Shape features a vacuum treatment technology with variable pulse modes. The vacuum lifts, folds, and compresses the skin to increase local blood circulation and stimulate lymphatic drainage. It promotes fibroblast activity and favors vasodilation. LLLT Laser Since the LLLT laser irradiates the fatty tissue, it contributes to the formation of temporary micropores in the fat cells and accelerates the fragmentation of triglycerides into glycerin and fatty acids, which can escape from the cell, which in turn has a smaller volume. The released lipids are eliminated through normal metabolic processes. Through targeted application to the treated areas, LLLT effectively reduces body circumference and has also proven effective in reducing edema. Technical Data Supply voltage 220/230 Vac 50/60 Hz Power consumption 1300 W Weight 45 kg Dimensions 348x513x1008mm Low-power laser wavelength 760 nm Laser class 3 R Laser density 8MW/cmq Frequency of the bipolar high-frequency signal 1500 kHz (1.5 Mhz) Maximum RF power Less than 25 W Stimulated suction value Less than 80 kPa (0.8 bar) Item condition: used, good condition You can find more items - new and used - in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2007, Stiefelmayer Brivisor KL-4 Hardness Testing Machine Testing height: 150 mm (with testing table) Outreach: 200 mm Device footprint: 560 mm x 250 mm x 770 mm (W x D x H) Load range: 0.05 - 10 kgf Weight: approx. 45 kg Year of manufacture: 2007 Vickers: HV 0.1 | 0.3 | 0.5 | 1 | 2 | 3 | 5 | 10 Brinell: HBW 1/5 and HBW 1/10 You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Gbsdpfx Aajzzynhonsw Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.