Used Pvc Extruder for sale (1,336)

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: DS 013.0091, RAW MATERIAL TOWER PME YOC 2017 TWIN SCREW EXTRUDER WEBER Type : DS 1327 YOC 2017 DIE NORDSON YOC 2017 CALANDER OMIPA Serial 09.38A24 YOC 2017 ROLL PLANA OMIPA Serial 09.38A24 YOC 2017 THICKNESS & DENSITY MEASUREMENT SEREL Serial 4031 YOC 2019 AIR BLOWERS & COOLING CHAPEL OMIPA Serial 22.10A88 YOC 2017 Dodpfx Aijz Dt Spszowd PULL ROLERS AND EDGERS OMIPA Serial 11.35A19 YOC 2017 2 BREAKERS TRIA YOC 2017 GUILLOTINE OMIPA Serial 16.30A19 TRANSPORTATION BELT OMIPA Serial 17.02A49 YOC 2017 10x TRANSPORTATION BELT BIELE WEIGHING BELT BIELE STACKER / ROBOT FANUC Serial E16Y3413 Type A05B-2612-B081 YOC 2016 Load 140 kg 2 SIDE SANDER COSTA Serial LB643001A Type KK9CCCC2200 YOC 2017 PORTAL STACKER BIELE Serial A6213-24 YOC 2017 LASERPRINTER MASCA ID TECHNICAL DETAILS Width : 2000 mm Extruder output : 1250 kg / hr ( possibly 1400 kg / hr ) Raw material PVC Raw material supply is a mixture of powders, ground recycled, micronised recycled Output is PVC plates size 2000 x 1390 x 3,75 mm Elecricity consumption : 41 000 KWH for 5 days production incl startup and stop of the line incl sander and extraction

Year of construction: 1995, condition: good (used), functionality: fully functional, Bausano complete granulating line, including generator. Output: 350-400 kg/h. Dwodpfezcarqex Aizod

Year of construction: 2011, condition: excellent (used), functionality: fully functional, SINGLE-SCREW EXTRUDER WITH AC MOTOR + INVERTER, AND ELECTRICAL CONTROL PANEL WITH 8 HEATING ZONES. Dwjdpszcav Aofx Aizod

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours. Djdpfx Ajzti Tkeizowd

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, for sale second hand brick - machinery Handle Dedpfxezmxi Uo Aizewd -extruder 600/560 Händle and Mixer MDV920b -filermixer Händle -roller mill 800x800 Händle WFZ880a - conveyer 40m x 80 cm gummi

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately Dwjdpfoy Exrpsx Aizod The machine line can be delivered immediately, with few operating hours and in new condition. Production line units: 1. Zhejiang Baina 150 20D 1000Kg/h cold feed vacuum extruder (Standard) 2. Zhejiang Baina EJ-PPF-150-04-00 conical die (Pneumatic) 3. Zhejiang Baina 6m infrared curing oven (width 1000mm) 4. Zhejiang Baina 6m hot air curing oven (width 1140mm) 5. Zhejiang Baina 6m hot air curing oven (width 1440mm) 6. Zhejiang Baina 6m hot air curing oven (width 1600mm) 7. Zhejiang Baina 6m hot air curing oven (width 1800mm) 8. Zhejiang Baina 6m hot air curing oven (width 2000mm) 9. Zhejiang Baina 6m hot air curing oven (width 2300mm) 10. Zhejiang Baina 6m hot air curing oven (width 2500mm) 11. Zhejiang Baina 6m hot air curing oven (width 2800mm) 12. Zhejiang Baina 36M FF-SLX-02-00 (3 layers * 12m) cooling system 13. PCM automatic longitudinal and transverse industrial cutting machine 2000mm 14. AC-15AD liquid chiller with 285 liters water tank If you are interested, we will send you a detailed description and data.

Year of construction: 1998, operating hours: 24,600 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 06, SINGLE SCREW EXTRUDER ME75/4 x 25 D - used machine, checked and ready for operation - open frame construction (new powder coated) with spur gearing and directly flange motor - DC-drive 35 kW - screw speed max. 38 rpm - 1-part cylinder, smooth with water-cooled entryzone - 6 heating and cooling zones - 1 flangeheating zone - 4 die heating zones, without heater - die connection incl. heater band - electrical cabinet mounted on operation side * incl. short interruption device 0,5 sec. - temperature controller type KS40, with self-optimisation - operation panel swivelling - hopper 100L with 3-pos. svievel mechanism - incl. NEW screw for processing PVC-U granule * nitrided , polished Djdpfs Ah Tg Rjx Aizswd

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Dwodszylxijpfx Aizod Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 Dedpfewivdkjx Aizewd extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Condition: new, functionality: fully functional, Equipment: documentation/manual, FOLIE DEKORACYJNE PVC 3D DO FRONTÓW MEBLOWYCH I MDF – 50 ROLEK Na sprzedaż zapas magazynowy folii dekoracyjnych PVC 3D producentów RENOLIT, BONLEX, ALKOREN i EUROVINYL. Oferta obejmuje 50 rolek o szacunkowej łącznej powierzchni około 14 000–15 000 m². Folie przeznaczone do oklejania frontów meblowych i kuchennych, płyt MDF oraz elementów profilowanych, z wykorzystaniem technologii prasowania membranowego lub próżniowego. Przydatność konkretnego dekoru do danego procesu należy potwierdzić na podstawie jego specyfikacji. W zestawie znajdują się różne kolory i dekory, w wykończeniu matowym, supermatowym oraz w wysokim połysku. Oferta skierowana do producentów mebli i frontów MDF, zakładów stolarskich oraz dystrybutorów materiałów meblowych. ZESTAWIENIE DOSTĘPNYCH FOLII • RENOLIT Graphite Supermatt Classic 16 rolek – szacunkowa powierzchnia 5 301 m². • RENOLIT Conifer Green Supermatt PF (V1238) 10 rolek – szacunkowa powierzchnia 3 278 m². • BONLEX Grigio Scuro HG 8 rolek – szacunkowa powierzchnia 2 160 m². • BONLEX Canadian Ivory 2 rolki – szacunkowa powierzchnia 576 m². • RENOLIT Reed Green Premier Matt Protected 1 rolka – szacunkowa powierzchnia 256 m². • RENOLIT Tobacco Ash SC Premier 1 rolka – powierzchnia do potwierdzenia. • ALKOREN Peperoncino Rosso HG Dwsdpjz I Rmrjfx Aized 1 rolka – szacunkowa powierzchnia 270 m². • EUROVINYL HFL 4090 1 rolka – szacunkowa powierzchnia 227 m². • Pozostałe folie – różne niezidentyfikowane dekory 10 rolek – szacunkowa powierzchnia około 2 300–2 800 m². Trzy największe partie: Graphite Supermatt Classic, Conifer Green Supermatt PF oraz Grigio Scuro HG obejmują łącznie 34 rolki. CENA I WARUNKI SPRZEDAŻY Cena ofertowa całego zapasu: 34 000 EUR netto. Preferowana sprzedaż wszystkich 50 rolek jednemu nabywcy. Zakup wybranych większych partii możliwy po indywidualnym uzgodnieniu. Cena pakietowa dotyczy wyłącznie zakupu i odbioru całości; ceny poszczególnych dekorów ustalane są oddzielnie. Zapas dostępny do szybkiego odbioru. Podane powierzchnie są orientacyjne. Dokładne ilości oraz dostępność poszczególnych dekorów wymagają potwierdzenia przed zakupem. Na życzenie udostępnimy dodatkowe zdjęcia rolek i etykiet oraz szczegółowe zestawienie dostępnych folii. Numer referencyjny oferty: PVC-3D-50.

Year of construction: 2000, operating hours: 10,000 h, condition: ready for operation (used), functionality: fully functional, Machine is in full functional state last time worked 25 days ago and its in your warehouse machine can be inspected and have video of machine working Dedps Adlxzjfx Aizowd

Year of construction: 2006, condition: used, functionality: fully functional, Complete Extrusion Line for Plastic Pipes Luigi Bandera / Graewe / Supertech Year of manufacture: 2006 For sale: Complete extrusion line for the production of plastic pipes. Installed in a mobile container setup = 3 x 40-foot sea container. (Walking Pipe system). Ideal for mobile production or limited space. Dwsdpszbkkhefx Aizod Specifications: Extruder: Luigi Bandera S.p.A. Year of manufacture: 2006 Serial number: 251371 / 251372 Downstream processing / cooling line: Supertech Industrie – Walking Pipe system Saw / cut-off unit: Graewe GmbH Type: RA 250/4 Year of manufacture: 1999 Control system: Krauss Maffei Installation: fully integrated in container (plug & play concept) Description: This robust extrusion line is suitable for the production of plastic pipes (PE/PP/PVC depending on configuration). The line consists of a powerful Bandera extruder, followed by a complete calibration, cooling and transport section (Walking Pipe), and a Graewe cut-off saw. Applications: Drainage pipes Cable protection pipes Industrial pipelines Irrigation systems 💬 Price on request 📍 Viewing possible by appointment; address = 7822 Ath, Belgium Keywords: Technical / industrial Extrusion machine Extrusion system Extrusion line Screw extruder Melt processing machine Plastic processing machine Pipe production machine Profile extrusion machine Continuous forming machine Melt and forming system

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Dedpfx Aijx Apckjzjwd

Condition: used, Year of construction: 2021, functionality: fully functional, Sale of complete PVC profile extrusion lines We offer for sale 6 complete technological lines for the production of PVC profiles, originating from an operational production facility. The equipment dates from 2011–2025, with some units having undergone major overhauls. The technological lines include: • twin-screw conical extruder Pol-Service Majcher PSMD 65 / PSMD 65/132, • main motor power: 37 kW, • output: approximately 120 kg/h, • calibration table with 2 vacuum tanks (Pol-Service Majcher, Polreplast or Greiner – depending on the line), • caterpillar haul-off with guillotine (Greiner or Gruber Extrusion), • stacking device, • vibrating station for unloading Big-Bags. Key information • 6 complete technological lines, • main motor power: 37 kW, Dedszlpabjpfx Aizewd • output: approximately 120 kg/h, • equipment from reputable manufacturers: Pol-Service Majcher, Greiner, Polreplast, Rawotechnik and Gruber Extrusion, • selected equipment after major overhauls, • available technical documentation and CE documentation for selected machines. Purchase options: • single technological line, • several selected lines, • complete machine park, • the entire facility with all production equipment. The price quoted is for one line. A detailed list of equipment, technical parameters, technical documentation and additional photos are available upon request. Location: Lower Silesian Voivodeship, Poland.

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 Djdoya Eldspfx Aizjwd • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, functionality: fully functional, • Compliant with CE standards. • Used for cutting aluminum and PVC profiles. Djdpforahzgsx Aizswd • Hydro-pneumatic cutting operation. • Adjustable cutting speed according to the profile. • Capable of cutting at fixed angles to the right and left: -60, -45, -30, -22.5, -15, 0, +15, +22.5, +30, +45, +60 degrees. • Pneumatic vertical and horizontal clamps. • Ø550 mm diamond-tipped aluminum saw blade. • Equipped with roller conveyor (3 meters right and left). • Oil spraying system. • Enables precision cutting thanks to the 3 kW motor and Hydro-check. • For use with a digital measuring meter.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Djdpfx Aijyhcabjzewd Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), functionality: fully functional, Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for the granulation of soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Additionally, the machine can also be used as a conventional single-screw extruder for various processing purposes. • Screw diameter: 200 mm • with degassing zone Dodpfx Aijw Iu T Tezewd • Drive power: 72.5 kW

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for rigid PVC Dwedsz Ngaxjpfx Aizod Suitable for HFFR formulations Suitable for elastomer compounds for low-, medium-, and high-voltage cables TECHNICAL DETAILS Screw diameter: 200 mm Length from feed inlet to end: approx. 1,100 mm L/D ratio: approx. 5.5 : 1 MACHINE DETAILS Drive power: 72.5 kW Overall machine length: approx. 2,500 mm Feed inlet height: approx. 1,000 mm EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing applications

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 Carnitech CT 2612 single-lane pin-bone removing and packing line for salmon and trout fillets. The pin-boner dates from 2000 and the packing line from 2023/24. Technical specification: ✅ Manufacturer - Carnitech A/S Dodpfoy Swi Hox Aizewd ✅ Model - CT 2612 ✅ Lanes - 1 ✅ Pin-boner year of manufacture - 2000 ✅ Packing line year of manufacture - 2023/24 ✅ Capacity - up to 36 fillets per minute ✅ Fillet size - 0.5 kg to 4 kg ✅ Fillets are conveyed head end first, skin side down, on a PVC belt Condition: According to the seller, the line is in full working order, and the pin-boner has been refurbished, including new electrics. Video available.

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,770 mm, total length: 4,400 mm, total width: 1,100 mm, overall weight: 1,000 kg, Equipment: documentation/manual, This machine comes fully equipped to provide flawless edges:  1. Pre-Milling Unit (RT-V): 2 counter-rotating diamond heads to eliminate panel chipping and telegraphing.  2. Gluing Station: High-efficiency EVA glue basin with rapid heating and automatic temperature control. 3. Pressure Zone: Driven main roller plus 2 idle pressure rollers for an optimal glue line. Dodj Ah Simjpfx Aizjwd 4. End Trimming Unit (K-2): Dual-motor automatic switching for straight or beveled cuts.  5. Fine/Flush Trimming Unit: High-frequency motors with numerical control adjustment for flush, radius, or chamfered trimming. 6. Corner Rounding Unit (Round 1): Complete finishing of panel corners on straight or shaped panels.  7. Edge Scraping Unit: Eliminates radius chatter lines for a smooth finish. 8. Glue Scraping Unit: Cleans away any residual squeeze-out along the joint line. 9. Polishing/Buffing Unit: Dual cloth motors to restore color and sheen to extruded PVC/ABS edges. 10. Anti-Adhesive Spray System: Dual-liquid spraying device to keep panels perfectly clean. Controls • Interface: SCM Orion electronic control panel with digital display for effortless program setup, unit exclusion, and troubleshooting. • Guide System: Numerically controlled automatic infeed guide. • Safety: CE certified with full enclosure safety hood and safety microswitches. • Material Support: Extendable roller support rail for processing oversized panels.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,500 h, LICHTER LRK 200, three-layer pipe head for PVC pipes, also suitable for PE and PP three-layer pipes. Last application: PP three-layer corrugated pipes. Pipe diameter max. 200 mm. Pipe diameter min. 60 mm. MATERIAL: Made of stainless steel. Year of manufacture: approx. 2018. Operating hours: approx. 3500 h. Condition: Very good, operational. Dwodpfxo Ah Suqs Aizsd Location: Sachal EXTRUSION MACHINES, D-26345 Bockhorn-Grabstede.

Condition: used, Year of construction: 2018, functionality: fully functional,  Dough Divider • Stainless steel dough hopper, flour hopper, and cutting blade. • Conveyor belts • Single discharge head and a special constricting helical axle to prevent air gap formation in the dough balls. • Precise control of dough-ball size (60-180 gr) using photo sensors. • Control via fingertip, using a potentiometer to adjust the production rate (500-1000 cuts per hour). Electro/pneumatic cutting (4.5 bars). • 3-phase variable speed motor (2 Hp/1.5 Kw) monitored by a variable frequency drive (inverter system). • Pneumatic parts – Spiral extruding system • All electrical parts are of European origin; inverters are used to control the speed.  Primary Proofer for dough balls • Fermentation layers with conveyor belts equipped with centering guides to keep the belts on track. • Transparent plexiglass, sliding side walls to facilitate cleaning and maintain the ideal dough temperature. • Flour collection drawers. • Control via fingertip, using a potentiometer to adjust the fermentation time (3-15 min) from the dough divider’s control panel. • 3-phase variable speed motor (1 Hp/0.75 Kw) monitored by a variable frequency drive (inverter system). • Inverters are used to control the speed.  Dough Flattener – Single Output • Control via fingertip, using a potentiometer to adjust the production rate (500-1000 loaves per hour, with a diameter ranging from 15-38 cm). • 3-phase variable speed motor (0.5 HP/0.32 Kw) to control the first phase of the flattening process. • Another variable speed motor (2 Hp/1.5 Kw) monitored by a variable frequency drive (inverter system) to drive the second part of the dough flattener located at the final proofer. Tobmdhs Ahf Diea S Ted • Stainless steel dough hoppers and flour collection drawers. • Special food-grade quality felt and PVC conveyor belts. • Double-stage flattening with a special thickness regulator for the flattened dough. • Electro/pneumatic stage shift from oval to circular shape. • Inverters are used to control the speed.  Final Proofer – Layers System • Fermentation layers (width of 40 cm) equipped with centering guides to keep the belts on track. • Transparent plexiglass, sliding side walls to facilitate the cleaning process and maintain the ideal dough temperature. • Control via fingertip, using a potentiometer to adjust the fermentation time (5-20 min) from the dough flattener’s control panel. • Conveyor belts are driven by the 3-phase motor (2 Hp/1.5 Kw). • Inverters are used to control the speed.  Tunnel Oven for bread 40 cm plates • Low-emission combustion process and relatively low fuel consumption. Heat-resistant steel conveyor plates (thickness of 5 mm) of food-grade quality. The oven frame is steel for insulation. • Suitable thermal distribution and safe insulating layers (3 different layers of bricks, cement, and fiber ceramic). • Control via fingertip, using a potentiometer to adjust the production rate (500-1000 loaves per hour, with a diameter ranging from 15-38 cm). • 3-phase variable speed motor (2 Hp/1.5 Kw) monitored by a variable frequency drive (inverter system). • Equipped with an insulating cover and an emergency stop button to protect workers on or near the machine. • Low polluting emissions. • Gas burner included. Dwodpfxo Ahf Dio Aizsd General Specifications: • Dough Weight: 60 to 180 gr, Bread diameter: 15 to 38 cm • Production Capacity +/- 500 to 1000 loaf/hour with a diameter of 15 - 38 cm

Year of construction: 2004, condition: excellent (used), Twin-screw extruder Rollepaal T-REX 2-90-30 Application PVC PIPE The extruder is in very good condition and ready for operation. Djdpfxoxcp T Ns Aizowd Location: Germany:D-26345 Bockhorn-Grabstede, Bahnhofstr 6 The extruder is my property

Condition: new, Year of construction: 2026, SJSZ 51/105 Conical Twin-Screw Extruder Industrial Twin-Screw Extruder for PVC Processing Dsdpfx Aioz Nmfbjzowd The SJSZ 51/105 conical twin-screw extruder is designed for continuous processing of PVC materials and the production of rigid PVC profiles, pipes and other extruded products. The extruder features a bimetallic screw and barrel assembly made of nitrided 38CrMoAlA steel, providing high wear resistance and stable extrusion performance. The machine is equipped with a 22 kW three-phase asynchronous motor with forced cooling, a DELTA variable frequency drive, OMRON temperature controllers, and Schneider electrical components. The extruder includes an automatic material feeding system, vacuum degassing, air-cooled barrel heating zones, and an electrical control cabinet. 1. General Technical Specifications • Model: SJSZ 51/105 • Type: Conical twin-screw extruder • Processing Material: PVC • Production Capacity: 50–120 kg/h, depending on material and operating conditions • Main Motor Power: 22 kW • Motor Type: Three-phase asynchronous motor with forced cooling • Motor Speed Control: DELTA frequency inverter • Power Supply: 380 V, 3-phase, 50 Hz 2. Screw & Barrel • Screw Diameter: 51/105 mm • Screw Length: 1085 mm • Screw Speed: 1–34.8 rpm • Screw & Barrel Material: 38CrMoAlA, nitrided • Screw & Barrel Design: Bimetallic • Nitriding Depth: 0.4–0.7 mm • Nitriding Hardness: ≥940 HV • Surface Roughness: Ra 0.4 μm • Bimetallic Layer Hardness: HRC 55–62 3. Heating & Cooling System • Barrel Heating Power: 12 kW 4 zones • Heating Zones: 10 • Heating Elements: Cast aluminum heaters • Barrel Cooling: Forced air cooling 3 zones • Temperature Controllers: OMRON 4. Gearbox • Gear & Shaft Material: High-strength alloy steel • Gear Treatment: Carburized, quenched and ground • Gear Hardness: HRC 54–62 • Gear Precision: Grade 6 • Screw Protection: Automatic screw displacement alarm 5. Feeding & Vacuum Degassing • Feeding Motor Power: 0.75 kW • Feeding Speed Control: DELTA frequency inverter • Feeding Operation: Independent or synchronized with extrusion • Vacuum Degassing Pump: 2.2 kW 6. Control & Electrical Components • Main Motor: 22 kW • Motor Cooling: Forced cooling • Main Frequency Inverter: DELTA • Temperature Controllers: OMRON • AC Contactors: Schneider • Electrical Control Cabinet: Included