Used Extrusion Plastic Line for sale (14,339)

Condition: repair required (used), Year of construction: 2003, functionality: not functional, It is a complete line for film recycling. It was bought together as complete line. Components • Shredder TRI TUR TM 3 model with hydraulic drive and 75 kW motor. • Pre-washing tank for contaminated film. Bottom sludge discharge. Made of stainless steel! • Water grinder L5 650/1000 10 rotating and 4 stationary knives • Centrifuge Hfjdox Ddchspfx Aadec Mainly available as a single item! Used, in good condition, has not been in operation for a long time, requires repair. The grinder is currently in operation and can be viewed in Dunaújváros(Hungary) Check out our other products. (Re-pelletizing line, chiller...)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Hfedsyhcabepfx Aadec Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder Hsdeu Rda Iopfx Aadsfc - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Hfsdpovbcbuefx Aadjc Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: good (used), Single Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Options • Including haul-off • Including cooling bath Hjdpfx Ajvri Ddeadefc

Year of construction: 2026, condition: new, Extruder 30 mm - 28 l/d Hfodpoi Tu U Usfx Aadec with die for weldingwire extrusion or profilextrusion with cooling bath with adhesive water blow-off with haul-off with winder and guiding device

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h Hodpfx Aeyi Ezkoadjfc - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: 1x gravimetric ( loss-in-weight ) blending unit 5-Components SITECOM incl. control board 1x Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. Hedpfx Ajh Eyd Aoadsfc 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter Type K –HS- Y 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, find our most-recent stock-list online on our homepage.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head Hsdpfx Aaed Sg Hrodjfc 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter No. 1 type K –HS- Y sieve/Mesh 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Melt-Filter No. 2 type K-SWE 180 RS back-flush self-cleaning 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment Hedpsgbffvsfx Aadjfc You´re welcome. More compounding pelletizing lines ex pour workshop available, > find our most-recent stock-list online on our homepage.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Hjdpfoi Dtb Aex Aadsfc Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW Hsdpjya Eldjfx Aadsfc • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: used, functionality: fully functional, Plastic Granulation Line + for Spare Parts The line includes: -Extruder: CINCINNATI MILACRON CM65HP, year of manufacture 1996 -Granulating head -Granulate cooling system -Cyclone: GAMART -Raw material pneumatic conveying system ADDITIONAL EQUIPMENT -Single-screw co-extruders – total of 9 units -Raw material transport: -Pneumatic (powders, granules) -Mechanical (screw conveyors, 2x chain-type redler conveyors) -2 x trough mills – for grinding PVC profiles Technical condition: equipment is fully operational, currently in use in production Applications: -Plastic granulation (PVC, other types) -Co-extrusion Documentation and photos available upon request. Hjdpfx Aajyda Egjdofc

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Hfjdpfx Asw Hz T Ejadec

Year of construction: 2023, condition: new, Coperion ZSK 27 MV Plus extrusion line Application: Pharma dental sticks Year: 2023, never used, still in original packaging Hjdpfx Asxr Hgxjadofc

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH Hfjdpfeqpft Iox Aadec - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 102.364

Condition: used, Year of construction: 2003, The Macchi 3-Layers is a high-capacity blown film co-extrusion line intended for production of general-purpose films with high width and output demands.It processes LLDPE, LDPE, mLLDPE, MDPE, HDPE, and in upgrade configuration also PP.The system uses a 700 mm 3-layer die head and reaches an output capacity of up to 900 kg/hour, depending on formulation. EXTRUSION GROUP: • Extruders: 80 mm + 100 mm + 80 mm • Infrared heating • Hydraulic screen changers Detailed upgrade specification: • One extruder Plastex 100/30D (middle layer B) • Two extruders Plastex 80/30D (layers A and C) • Bimetallic barrels • Nitrided screws • Water-cooled grooved feeding sections • 5 heating zones with IR heaters and blowers • Motors: - 150 kW DC motor (100 mm extruder) - 100 kW DC motors (80 mm extruders) • AC motor application with digital control (IP55) for reduced energy consumption and harmonic distortion DIE HEAD: • Model TE505 • 700 mm die diameter, die gap 1.8 mm • 4+4 heating zones with ceramic heater bands (19 + 35 kW total) • Mounted on a die cart with integrated air distribution manifold • Insert range 600–800 mm • Equipped with IBC system COOLING SYSTEM: • Dual-lip carbon fibre Karat air ring (K-Design) • ASR4 Double Flux Cooling Ring, blower 15 kW • Jet-7 IBC cooling control system - 15 kW introduction blower - 18 kW extraction blower - Bubble diameter sensor - Air balancing valves - Variable-speed inverters TAKE-OFF UNIT: • Take-off width: 3200 mm • Oscillating nips • Optional tower-mounted secondary nip with load-cell control WINDING SECTION: • Double automatic back-to-back winder Hedpfx Aasx Akywsdefc • Automatic roll change • Maximum winding width: 3150 mm FILM SPECIFICATIONS: Film width range with 700 mm die: 2000–3100 mm Thickness: 15–200 μm Output example: 3000 mm width, 100 μm LDPE → 800 kg/h ±10% LINE SPECIFICATIONS: Installed power: 550 kW, 415 V, 3-phase + neutral Screw speeds: 80/30D extruders: 0–130 RPM 100/30D extruder: 0–120 RPM Cooling water consumption: 6 L/min Compressed air requirement: 6 bar ADVANCED CONTROL & MEASURING SYSTEMS: • Doteco gravimetric dosing system Grado • Thickness profile systems (EC Plus modules): - S2 Automatic Die Control - S3 Rotating Capacitive Thickness Scanner - S4 Track Scanner - Q1 Serial communication (extruder/gravimetric values) - Q11 Printer module - Q12 Online modem diagnostics - Q7 Power consumption monitoring • K-Design VARIOcool automatic thickness control • Kundig reversing ring and thickness measurement AUXILIARY EQUIPMENT • Tower • E+L web guiding system • Corona treater AFS or 2800 station • Calibrating basket with optional supporting basket • Bubble guide GSRC 3200 (6 levels, motorized, IBC-linked) • Micro-perforation system (FBF cold needle) • Air shafts (8 pcs)

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D Hfsdpfsn Utt Hjx Aadjc * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Hfsdpfou Ttf Nox Aadjc Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: ready for operation (used), Year of construction: 2001, Ø 710-1000mm range PVC pipe production line. Hfjdpfx Aaevzqy Ssdjc

Condition: ready for operation (used), functionality: fully functional, operating hours: 9,743 h, Complete pipe extrusion line for Double wall corrugated pipes – 150mm to 350m Hsdpfx Asvztb Sjadofc Material Dryer and loader– M+H Equipment, Germany Duo Extruder combination – Battenfeld 90/75 – Type PEX-1-75-30B Germany Special die head – DWP 270 – UC500 From 90mm ID to 270mm OD Special die head – DWP 630 – UC500 From 160mm ID to 500mm OD Unicor - Germany Corrugator – UC 500/40 Made in Germany Extrusion die and set of forming blocks – 1 set for DWC pipe ID 150mm, 200mm, 250mm, 300mm & 350mm Unicore - Germany Cooling Spray Bath – UCSB 500 Machine No Unicore, Germany Planetary Saw – SICA, Model – TRK/D/SY 10-500 Tube Deposit Unit -500

Condition: used, Year of construction: 1970, functionality: fully functional, BARMAG extrusion system consisting of: 1x BARMAG BA KEP 90-26.3-S extruder 1x BARMAG 9E4-11-103/Z transmission gear 1x AEG G 16.04 drive motor with forced ventilation, 460V, 112A, 46.7KW, 3150rpm, rated at 330V, 2.21A 1x SCHOLZ dosing unit, incl. Feed hopper 1x Control unit Hfedpeuakzzsfx Aadsc System features: - Single-screw extruder, built around 1970 - Throughput 200 kg/h - Conversion to new screw geometry in 2016 - Screw diameter 90 mm - Screw length 2769.5 mm - Process length 26.3D - Geometry: Feed - Barrier - Mixing section - Screw material: 1.8550, nitrided - DC motor - Technical documentation This system is available in three versions. Subject to prior sale. Please send inquiries via email only. Note: The machine is still installed and can be inspected on site. The buyer must dismantle it and arrange shipping themselves. This is not included in the offer price.

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 Hjdpfxjuak Nlo Aadofc 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Hjdpfx Aajpah U Tedsfc Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Year of construction: 2000, condition: refurbished (used), • Manufacturer: SICA • Type : C800 • Year : 2000 • 6 caterpillar • Up to 800mm Hjdpfx Asix I I Ijadefc • Motor power : 8,5kW • Great condition