Used Rapida 104 for sale (833)

Condition: used, Year of construction: 1978, Year: 1978 – recently modernized TECHNICAL DATA: • Max. web width: 1450 mm • Max. unwind diameter: 1000 mm • Max. finished reel diameter: 400 mm • Hydraulic reel lifting • Circular slitting system • 4 Rewind shafts on two turrets • Pneumatic brake Tsdpfxoz Ern So Abued • Length measuring and control system • Optical edge control Machine has been completely overhauled and equipped with new AC motors, a new cabinet and panels; new PLC Siemens S7; new Montalvo pneumatic brake and controls; new edge control for detecting edges from both the top and bottom.

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm. Tsdpfx Aoig T Amobusd

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: B6.01122.2949, total width: 2,000 mm, total length: 850 mm, total height: 1,400 mm, pressure: 460 bar, operating pressure: 460 bar, type of input current: three-phase, overall weight: 1,698 kg, rotational speed (max.): 1,800 rpm, power: 0.089 kW (0.12 HP), Hammelmann HDP 122 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 460 bar Delivery rate: 104 l/min. Drive speed: 1800 rpm. Drive power: 89 kW with ACM 315 S-4/PHE electric motor 110 kW, IP55 with pressure control valve, Todpoqhnrhsfx Abusd with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2,000x850x1,140 mm Weight: approx. 1,698 kg Year of construction: 2016 Condition: In very good used condition. 2 pieces available.

Condition: ready for operation (used), Veneer Lathe manufactured by Rau-te in Finland. Type 104" Dimension veneer sheets: Length 2.62 m. Minimum width 0.5 meter Tsdpfx Abjzy Ui Dsusd Infeed loading system included. There is also a complete out feed system included ofter the Veneer lathe with acceleration conveyor, veneer cutting knife and veneer stacker. A second veneer lathe Raute 66” is also available with in- and out feed system. Dimension veneer sheets: Length 1.00 m to 1.65 m. Minimum width 0.5 meter

Condition: used, Year of construction: 1991, cutting width 280 mm Cutting height 150 mm Tjdpfx Abozughbeuod Motor output 2 x 4,0 kW saw blade 420 x 30 mm Cutting length 6000 mm speeds 2800 U/min air pressure 7 bar weight of the machine ca. 1750 kg dimensions of the machine ca. 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Year of manufacture: FKM 1997, overhauled 2020 Year of manufacture: Automatic packing machine 1985, overhauled 2020 Location: 41751 Viersen, North Rhine-Westphalia Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Availability: Immediately We look forward to your inquiry. Your WS Quack + Fischer Team Tjdpfjrnkwrex Abued

Year of construction: 2008, condition: used, Year: 2008 Condition: Functional, dismontled in the warehouse Six-colour sheetfed offset press with coating tower including chambre coater (L) extended unloader (ALV) and carton equipment up to 1,2 mm Technical parameters: - Maximum sheet format: 740x1050 mm - Minimum printing format: 350x500 mm - Maximum speed: 15 000 sheets / hour - Usable materials: cca.60g/m^2 max 1,2mm - High of the stock: - loader 1300 mmm - unloader: 1200 mm - Double diameter impressions and transfer system Basic specification: Loader equipment: - Drive Tronic loader - Sheet splitting with 4 lifting and 6 transporting suction cups (2 of which are long jump suction cups) - Format presetting from the Ergo Tronic controle panel Loading equiment: - Pneumatic traction pads with automatic format adjustment via menu from the Ergo Tronic controle panel Print unit equipment: - Automated plate changing (SAPC) Color wheel equipment: - Color Tronic tinting with 35 zonal blades, each 30mm wide Interpreter equipment: - Powder device WEKO AP 130 Gallery at the machine: - Ergonomic gallery on the device and oparator side Tedpey H Hgdofx Abusd Machine equiped: - Equipment for printing cardboard up to 1,2 mm o Manual skid steed loader o Equipment for carton management in printing units o Monitoring the pasage of sheets o Roll down roller shutter for stop-free unloading - Extended unloader / delivery 2600 mm - Full automatic plate changing with pneulatic plate bending device - Machine elevation by 375 mm - ACR Controle(automatic Register) - Connection to the existing Logotronic basic systém (CIP 3) - Connection to the existing Densitronic S console - Color zone status and measured values for Densotronic - Baldwin blankets and impression cylinders washing devices - Combined cooling / temperature controle - Baldwin unit - Grafix dusting with iuonization and connection to the controle panel - Infrared and hot air dryers in delivery

Condition: used, Year of construction: 1995, table-size Breite: 800 mm table-size Tiefe: 350 mm Dimensions (L/W/H) 4600 x 3200 x 2500 mm weight of the machine ca. 4,5 t Tedpfxswp Tuye Abuod

Condition: used, Year of construction: 2008, Trepko 104 KSP – Filling & Closing Machine (Year 2008) Well-maintained Trepko 104 KSP inline filling and closing machine, suitable for butter, margarine, spreads, dairy products, and similar applications. Specifications: - Model: Trepko 104 KSP - Serial No.: 3702 - Year: 2008 - Capacity: Up to approx. 200 cups/min (4 lanes, 50 cycles/min) - Filling System: Servo-driven piston filler for high dosing accuracy - Closing System: Foil heat sealing + option for snap-on plastic lids - Construction: Stainless steel, hygienic design Documentation: - EC Declaration of Conformity - Pneumatic schematics - Manuals included Key Features: Tedpox A Er Iefx Abued - Fully automatic inline operation - Quick format and product changeover - Reliable and robust machine design - Suitable for dairy and food production - Machine has been out of operation for the last two years - Good technical condition, available for immediate sale. Location: Denmark Filling volume: 200, 250, 400, & 500 grams.

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, CNC Vertical Machining Center DECKEL MAHO DMC 104 V linear With Heidenhain iTNC 530 path control Year of manufacture: 2005 Travel ranges: X 1040 mm, Y 600 mm, Z 500 mm Spindle speed range: 0 – 12,000 rpm, stepless With the following accessories: Fixed angular table, 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions (SK 40) NC dividing head with tailstock Tedpoz Sahcjfx Abuod Electronic handwheel Full protective enclosure with sliding doors and interior lighting Operating modes 3 + 4 IKZ 40 bar Chip conveyor Rotoclear Chip flushing gun Spiral chip conveyor Coolant system 3 adjustable machine feet Operating manual

Condition: good (used), Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Pallet racking: boltless racking, heavy-duty racking / 34 uprights and 104 crossbeams -Stand depth: 1100 mm -Stand height 4100 mm: 2 pieces -Stand height 3500 mm: 13 pieces -Stand height 2000 mm: 19 pieces -Crossbeams, length 2760 mm: 93 pieces -Crossbeams, length 1890 mm: 11 pieces -Dimensions/Quantity: see photo parts list Tedpfx Ajx Ikirebued -Submission/Price: complete -Transport dimensions: 6950/2250/H1460 mm Total weight: 4380 kg

Condition: excellent (used), Year of construction: 2005, Excellent technical condition, recently serviced. Tedpfezr Icnjx Abuod Cutting length: 6000 mm Saw blades: 420 mm E550 control system Vertical pneumatic clamping Cutting based on external dimensions, without adjustment Pneumatic angle adjustment from 45 to 90 degrees Cooling system installed Digital angle indicator Saw blade guards that automatically lower and raise.

Year of construction: 2024, condition: used, Applications and use: Todsw Rkxqspfx Abued The separator is best suited when a light excavator needs to handle heavy, stubborn materials. It is derived from the wider TSC.154 and features the same drive and bearing assembly, resulting in increased power output on a smaller screening surface. The built-in star discs are 5 mm thicker than the standard discs and are additionally fitted with welded-on wear protection. The disc separation gap is 20 mm, resulting in a screened particle size of 0-25/30 mm, ideal for producing backfill material. Price does not include the mounting plate. Adapters for excavators can also be custom fabricated and supplied upon request. Price on request. For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 30 - 45 m³/hr Leak oil connection required: no

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Tjdpfx Asz D Aqusbuod Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: used, sheet width 1050 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm distance between columns 1200 mm blade length 1150 mm no. of strokes 46 - 69 Hub/min cutting angle 1.30 ° Control konv. oil volume 100 ltr. total power requirement 5.68 kW weight 1100 kg From a maintenance workshop In good condition (!!) Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge * Backlash-free ball screw for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch Tsdpfx Asy Raimjbusd - Operating instructions (PDF)

Condition: excellent (used), Beveling Machine Stock Number: 9283 Manufacturer: Trumpf Year of Manufacture: Type: 104-0 Machine Number: Max. bevel length (infinitely adjustable): Mild steel at 400 N/mm²: 10 mm Mild steel at 600 N/mm²: 8 mm Mild steel at 800 N/mm²: 5 mm Working Speed: 2 m/min Rated Power: 2 kW Tjdowfzzmopfx Abuod Stroke Rate at Rated Load: 370 / min Material Thicknesses Min/Max: 3 / 25 mm Weight: 16.5 kg

Condition: ready for operation (used), Year of construction: 1996, KBA 104-5P, Auto wash, auto plate, IR dryer, 1996 year Format: max - 72x104 cm min - 28x42 cm max speed 15000 per hour weight approx 49 tons dimensions 11x4.3x2.3 m Tedjyi T Ncjpfx Abujd

Condition: excellent (used), Year of construction: 2004, working width: 4,100 mm, stroke length: 680 mm, pressing force: 400 t, Used, Very Clean high quality Bystronic 400ton x 4metre Cnc Hydraulic Press Brake for sale Very clean 4metre cnc pressbrake for sale – Bending / Folding machine down stroke pressbrake for sale With Extended daylight and stroke Make= Bystronic Model = PR10 400x4100 PR400 Bed Length 4100mm / 4.1metre 8axis – 6axis back gauge Y1, Y2, X1,X2,R1,R2,Z1,Z2 x2 Front powered sheet followers / lifting aids Hydraulic tool clamping CNC Hydraulic Press 400 Tonne Capacity Swiss made Cybelec Controller – MoEva12 Multiple Forming Tools Tool stacking system included Full Working Order and fully serviced with Bystronic UK Max closing speed 200 mm/s Complete with a good selection of tooling Tjdpfxsv Dw Sye Abujd

Condition: used, Year of construction: 2004, x-travel 1040 mm y-travel 600 mm z-travel 500 mm feed 30 m/min control Siemens type 840 D table surface area 1250x600 mm table load 800 kg Tool changer 30 Fach spindle taper ISO SK 40 turning speeds 12000 U/min total power requirement 24 kvA weight of the machine ca. 8,8 t dimensions of the machine ca. . m Chip Conveyor Quick-Clamping System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Tjdpfx Abezdcb Reued please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Make: DMG Model. DMC 104 V Linear Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Z-axis travel 500 mm Tjdpet I Di Aefx Abujd Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Drive 13/19 kW at 100/40% duty cycle 30-station tool changer Equipment: Linear drive on the X-axis Bed flushing system Spiral chip conveyor Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Condition: used, Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, hydraulic tensioner, swing clamp, hydraulic swing clamp -Hydraulic clamp: Hydraulic swivel clamps 11 pieces Tedpsqfkkmofx Abued -Swivel clamp: Römheld 1885-104 -Three-way valves: Hawe DZ3-1R -Price/tax: complete -Dimensions: 220/65/H165 mm / 100/100/H100 mm -Transport dimensions: 560/370/H160 mm -Weight: 64 kg

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, input current: 370 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2026, continuous power: 200 kW (271.92 HP), Equipment: type plate available, Exact model designation: Control Techniques Unidrive M000-104 03200 EU0 Output power and output current: 200kW | 361A ° Includes inspection seal! ° Easy operation via integrated control panel ° Quick parameterization possible ° Original operating manual for commissioning included Todpfx Aozrc Dysbuod Only 1 unit left in stock! This item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the item's visual condition. Fully functional and ready for immediate use.

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Tedpfx Abswprmzousd Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: used, Letter Press Zylidner DIE Cutter Johannisberg 104 Buchdruckzylinder / Letter Press Zylidner DIE Cutter Johannisberg 104 Tsdpfx Abjycrz Doued Year 1966 - Serial-No. 2153801 Size min. 360 x 520mm - max. 720 x 1020mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), mileage: 205,477 km, power: 206 kW (280.08 HP), gearing type: automatic, fuel type: diesel, color: yellow, axle configuration: 4x4, first registration: 12/2008, mast type: telescopic, Equipment: all wheel drive, cabin, - Rear work lights - Front work lights - Windshield - Steering assist - Rotating beacon - Auxiliary heating system - Central lubrication system General Information Year of manufacture: 2008 Operating hours: 10,350 Technical Information Number of cylinders: 6 Engine displacement: 6,374 cc Drive: Wheel drive Dimensions Dimensions (L x W x H): 1100 x 259 x 360 cm Weights Unladen weight: 23,800 kg Payload: 200 kg GVW: 24,000 kg Functional Lifting capacity: 40,000 kg Superstructure brand: LIEBHERR LTM 1040 2.1 CE marking: yes Condition Technical condition: good Optical condition: good Financial Information Price: On request LIEBHERR LTM 1040-2.1 UTM 725 – 40 TON MOBILE CRANE – 35 METER TELESCOPIC BOOM – FULL BALLAST – YEAR OF MANUFACTURE 2008 LIEBHERR LTM 1040-2.1 UTM 725 – 2-AXLE ALL-TERRAIN MOBILE CRANE – 40 TON LIFTING CAPACITY – 35 METER TELESCOPIC BOOM – ORIGINAL PAINT – MICHELIN TIRES – FULLY BALLASTED GENERAL VEHICLE DATA - Manufacturer: Liebherr - Type: LTM 1040-2.1 - Model: UTM 725 - Year of manufacture: 2008 - First registration: 11.12.2008 - Mileage: 205,700 km - Operating hours (upper carriage): 10,350 hours - Maximum lifting capacity: 40,000 kg - Number of axles: 2 - Drive: 4×4×4 - Specified unladen weight: 23,800 kg - Tires: Michelin 16.00 R25 XGC - Color: Original paint - Counterweight: Full ballast Tsdpfo Afm Eljx Abuod - Location: Geurts Trucks BV – Andelst, Netherlands DETAILED TECHNICAL DESCRIPTION This Liebherr LTM 1040-2.1 is a compact and powerful 2-axle all-terrain mobile crane with a maximum lifting capacity of 40 tons. The mobile crane features a hydraulically extendable main boom with a maximum length of 35 meters. Thanks to its compact design, all-wheel drive and all-wheel steering, this Liebherr is ideally suited for crane work on construction sites, industrial plants and locations with limited space. Special features: - Maximum lifting capacity 40 tons - 35-meter hydraulic telescopic boom - 2-axle all-terrain design - 4×4 all-wheel drive - All-wheel steering - Complete ballast package - Hydraulic four-point outrigger system - Original paint - Michelin 16.00 R25 XGC tires - Compact design and excellent maneuverability TELESCOPIC BOOM – BOOM LENGTHS AND DIMENSIONS The Liebherr LTM 1040-2.1 features a four-section hydraulic telescopic boom, consisting of a basic boom and three telescopic boom sections. | Description | Boom length | | ----- | ----- | | Base boom retracted | 10.50 m | | Telescopic position | 15.40 m | | Telescopic position | 20.30 m | | Telescopic position | 25.20 m | | Telescopic position | 30.10 m | | Telescopic position | 32.60 m | | Maximum extended main boom | 35.00 m | The various telescopic positions enable flexible use for different lifting heights and outreach. ...