Used Ras 632 for sale (68)

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 2.5 mm steel Motor-controlled back stop with folding cams up to 1500 mm Bsdpoza Ahpofx Adhelp Several program sequences with different bending angles and stroke heights are possible Control Multibend 2000 Polished bending rail Weight: 1,700 kg

Condition: ready for operation (used), Max. working width: 3060 mm For sheets (at 40 kg strength) up to: 4 mm Min. bending radius: sheet thickness x 1.25 Min. inside flange height: sheet thickness x 6 Upper beam opening width: 220 mm Lower/bending beam adjustability: 90 mm Bedpoxwnltofx Adhjlp Max. bending angle: 180° Stroke speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Required space: 4150 x 1800 x 2500 mm

Condition: used, Year of construction: 1980, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm Bjdpfx Aeyv N I Aedhslp back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1600 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, Year of construction: 1986, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1300 kg Equipment: - manual backgauge, with analog display Blodpfeyv Nn Aex Adhjp * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, Year of construction: 1984, machine/vehicle number: 220-3, Ref. No. 25304 Technical Data: - Machine for producing longitudinal seams on the edges of square or rectangular long ducts - Number of roller shafts with seam rolls: 15 pcs - Material thickness: from 0.5 to 0.63 mm - Duct dimensions: from 80 x 80 mm up to 100 x 100 mm - For duct dimensions from 100 x 100 mm - Material thickness: 0.5 to 1.0 mm - Feed speed: 15 m/min - Pneumatic connection Bsdpfx Adsw U Rb Hshelp - Drive: 400 V / 3 kW - Includes: - Foot switch - Duct guide plates - Separate lubrication system - Space requirements: approx. W 5400 x H 1200 x D 800 mm - Weight: approx. 950 kg

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Specifications : Maximum working length 2160 mm Bljdpfx Asqzibtodhsp Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum thickness of sheet metal (stainless steel) 1.5 mm Maximum sheet metal thickness (aluminum) 3.0 mm Maximum development sheet width 1500 mm Maximum four-sided fold height max * 203 mm Bending blade reach 180 degrees Machine width 5500 mm approx. Machine length 7000 mm approx. Machine height 2500 mm Total weight 21000 kg Power 18 kW Frequency 50 Hz Pressure 6 bar INCLUDED drag loading system

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: RAS 74.30; MB8001, control type: CNC control, working width: 3,200 mm, installation height: 2,400 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,500 mm, overall weight: 6,000 kg, total width: 4,000 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, The machine is in good condition. Control unit and relay board have been overhauled. Complete, segmented gooseneck tool, H=100, is included. Blsdpex Av Uaofx Adhsp

Condition: used, sheet width 3200 mm Blsdor Ngtfopfx Adhop plate thickness 2,5 mm weight of the machine ca. 3,5 t Tools recentely grounded. Bending angle preselection via potentiometer

Condition: used, Max. cutting length: 2540 mm Max. sheet thickness: 2 mm steel Manual rear stop up to 550 mm Side stop and table extensions Blodoy Uyamepfx Adhep knife sharpened 1600 kg

Condition: refurbished (used), functionality: fully functional, RAS 12.31 Max. sheet thickness: 1.75 mm Outreach: 200 mm Bljdpfx Adsdy Sp Rehop Weight: 160 kg Accessories: Set of rollers available on request (Various roller sets in stock) Condition: Reconditioned

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 52/10, working width: 3,200 mm, sheet thickness (max.): 3 mm, empty load weight: 4,400 kg, TECHNICAL DETAILS Sheet width: 3,200 mm Sheet thickness: 3 mm Bsdpfxoxyv Ius Adholp Opening width of the upper beam: 300 mm MACHINE DETAILS Motor power: 4.5 kW Dimensions & Weight Space requirements: approx. 4,300 x 2,300 x 1,750 mm Machine weight: approx. 4,400 kg EQUIPMENT Segmented pointed rail Segmented gooseneck tool

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, working width: 4,060 mm, sheet thickness (max.): 2 mm, empty load weight: 5,500 kg, stroke length: 300 mm, TECHNICAL DETAILS Sheet width: 4,060 mm Sheet thickness: 2.5 mm Stroke: 300 mm Bodpfxsxxrmqe Adhelp Backgauge length: 10 - 1,550 mm MACHINE DETAILS Total power requirement: 3 kW Machine weight: approx. 5,500 kg

Condition: excellent (used), Maximum cutting length: 2040 mm Blodjduw Ekopfx Adhop Maximum sheet thickness: 2 mm steel Weight: approx. 1100 kg

Condition: used, Technical details: sheet width: 2004 mm plate thickness: 2,5 mm Bodsya Eq Hopfx Adholp distance between columns: 2040 mm Total power requirement: 3 kW bending angle max.: 180 ° Weight approx.: 1700 kg dimension machine approx.LxWxH: 2,7 x 1,3 x 2,0 m

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 18,922 h, control type: CNC control, Hydraulic pivoting bending machine Manufacturer: RAS, Type: 74.30, 3200 x 4mm Technical data Bledpfx Adozhm Nfshsp Manufacturer: RAS Type: 74.30 Year of manufacture: 1992 Usable length: 3200 mm Capacity: 4 mm Operating hours: 18,922 h (read) Stroke: 400 mm Adjustability of the lower die: 80 mm Adjustability of the bending die: 80 mm Bending angle setting: 0 – 180° Bending angle accuracy: +/-0.1 mm Motor power: 7.5 kW Dimensions: approx. L 4.50 x W 1.80 x H 2.55 m Weight: approx. 5.8 t Equipment • Controlled back gauge 10 - 1500 mm • CNC control Multibend 9000, with 13" monitor, renewed • Automatic bending die adjustment • Gooseneck support rail, H = 150 mm, L = 3,200 mm, segmented • Bending rail 15 mm • Top bending rail, height 10 mm, L = 2,500 mm, segmented • Top bending rail, radius 17.5 mm, L = 2,500 mm, divided into 10 x 250 mm All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: good (used), sheet width 2000 mm plate thickness 2,25 mm distance between columns 2040 mm total power requirement 7,5 kW weight of the machine ca. 1,5 t Bedjul Ei Eepfx Adholp dimensions of the machine ca. 2,2x1,7x1,1 m SN-No. 380/6

Condition: used, Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine Blsdpedy Rhdsfx Adhep -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm Bjdpfx Asgxgm Hodhelp -Weight: 65kg