Used Reflection Densitometer for sale (424)

Condition: new, functionality: fully functional, machine/vehicle number: NEW-22, maximum load weight: 2,894 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 406 184 3500 2 Gtjdpoghpbksfx Abvsw NEW VEHICLE Internal dimensions: 406cm x 184cm Sidewall height: 35cm Loading height: 68cm Gross weight: 3,500kg Payload: 2,894kg Braked tandem trailer Overrun and handbrake by AL-KO Largest possible axles and brakes Low chassis Fully welded, hot-dip galvanized steel frame 35cm aluminum profile sidewalls with tension locks All sidewalls foldable and removable 15mm anti-slip, robust phenolic ply floor Automatic jockey wheel with 400kg support load 8 noise-damping lashing points, each with 800kg tensile strength Reinforced 13" C-rated steel wheels with steel valves M+S tires Net/rope hooks on frame 13-pin electrical connector LED marker lights at the front Rear lights with reversing light, fog lamp, and reflective triangle OPTIONAL ACCESSORIES PERMANENTLY REDUCED FROM FEBRUARY 2026 - 100km/h kit (shock absorbers) - Spare wheel with bracket - Without sidewalls (discount) - Black Edition (powder-coated sidewalls and rims in black) - Integrated loading ramps, 2,800kg - Steel plate overlay for floor - Full LED lighting - Anti-theft device - Net (fine or coarse mesh) - H-frame - Leaf mesh sides in various heights, also closed - Extension sidewalls 30cm with tension lock - Flat tarpaulin with or without bows - High tarpaulin 180cm or 200cm - AL-KO winch, 12.5m Further accessories on request! Plus shipping to Gera and vehicle registration documents: €200 net Photos are for illustration purposes only and may show optional accessories at extra cost. Have you not found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate collection. Our workshop is open weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repairs, also for caravan trailers. Large range of rental trailers. Additionally, we offer a wide selection of spare parts and accessories for trailers of all manufacturers. Contact us for a consultation by phone, visit our website, or come by in person.

Condition: good (used), Reflective light barrier, reflective light sensor, reflective sensor, light sensor, fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, contrast sensor, contrast sensor, sensor reflective light sensor -Manufacturer: ifm, contrast switch contrast sensor -Type: O5K500 -Dimensions: 70/45/18 mm Gtedpfjxzd Dmox Abvow -Weight: 0.1 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, 1 x 16-page web offset printing press Godpfx Ajx Dml Eebvotw Manufacturer: KBA Model: C16 Year of manufacture: 2011 Cut-off length: 620 Max. web width: 1000 mm Web direction: right to left General description: 1 x KBA splicer 4 x KBA printing units with automatic plate changing system 1 x web exit unit 1 x Megtec DualDry III 10.8-1066 dryer (without afterburner) natural gas (exhaust air volume = 4,176 Nm³) 1 x chill roller stand (4 rollers) 1 x folder support with WEKO silicon applicator 1 x KBA superstructure (6 longitudinal slitters, 1 former) 1 x KBA folding unit (with double parallel) 1 x inline densitometer control system GMI ColorQuick 1 x Planatol 9NET gluing system 1 x cooling center Axima / Cofely i.Cool Temp.Center 1 x postpress with stick former / palletizer and optional cutting line

Condition: used, mileage: 366,686 km, power: 110 kW (149.56 HP), first registration: 07/2018, fuel type: diesel, empty load weight: 4,010 kg, maximum load weight: 2,990 kg, overall weight: 7,000 kg, tire size: 225/75R16, axle configuration: 4x2, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space volume: 17 m³, loading space length: 4,000 mm, loading space width: 2,050 mm, loading space height: 2,150 mm, front tire size: 225/75R16, rear tire size: 225/75R16, Equipment: ABS, air conditioning, cooling unit, cruise control, electronic stability program (ESP), hydraulics, navigation system, onboard computer, sliding door, soot filter, tail-lift, traction control, Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders; therefore, our listings always reflect the export price, regardless of the final use location. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is updated regularly. This information should be regarded as non-binding and general information, and does not replace detailed, individual advice when making a purchase decision. Only the terms contained in the purchase contract are binding. Subject to change, errors, misprints, and prior sale. Only our general terms and conditions apply. Languages - We speak English - On parle français - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português Gtsdpfjyfhufex Abvsw - Parliamo italiano

Condition: used, Year of construction: 2022, operating hours: 2,294 h, power: 118 kW (160.44 HP), color: orange, empty load weight: 10,500 kg, Operating hours: 2294, First registration: 06.03.2023 Standard Equipment CityCat 5006 Driver's cab: Comfort cab mounted on hydraulic dampers, sound-insulated. Front windshield made of heat-insulating, curved, low-reflective safety glass. Two sliding windows in each door. Multi-stage heating blower. Sun visor. Windshield wiper with washer system. Air-suspended driver’s seat and suspended passenger seat, both individually adjustable. Steering column adjustable for angle and height. Clearly arranged and ergonomically positioned controls and monitoring instruments with a 7” color display. Visual and acoustic warning system for temperature and fluid level monitoring. Visual diagnostic system with intuitive design. Steering: Hydrostatic four-wheel steering with hydraulic servo assist. Axles: Rear axle as a driven steering axle with differential. Front axle fitted with coil springs and shock absorbers. Hydraulics: The latest electronic control concept enables consumption- and noise-optimized control of the diesel engine for a hydrostatic drive across the entire speed range – without power losses. Brakes: Hydraulic dual-circuit braking system with hydraulic servo assistance. Disc brakes on front and rear axles. Hydraulic spring-loaded parking brake on rear axle. 4 calipers on the front, 2 on the rear. Debris pick-up: Suction principle, with towed, stainless steel suction nozzle in front of the axle, together with side brushes, hydraulically adjustable laterally by 400 mm. Continuously variable high-performance suction fan. Debris hopper: Hopper volume 5.6 m³, hydraulically tiltable and closable. Discharge height 930 mm, discharge height (high tipping) 1550 mm (optional), discharge width 1700 mm, discharge angle 51°. Water system: Water tank approx. 880 l, one water pump for spray nozzles. Sweeping brushes: 2 sweeping brushes left and right, Ø 900 mm, infinitely variable speed adjustment 0-150 rpm with collision protection. Special equipment: - Color standard RAL 2011 orange - Hydraulic suction pipe flap - Leaf guard lift device for raising and lowering the leaf guard in the hopper via hydraulic hand pump - Easyclean quick cleaning system for cleaning hopper side walls, fan, recovery and leaf guard - 3rd front broom reinforced version with linear shift, inclination adjustment in both directions, adjustable contact pressure, extended reach, larger sweeping area - Leaf suction hose side mounted, length 3.5 m, Ø 160 mm, mountable on both sides - Fully integrated, CFC-free air conditioning - Heated and electrically adjustable wide-angle and main mirrors - Additional side broom mirror right - Rear-view camera and suction nozzle camera - Cruise control, improving work ergonomics and performance - Deluxe ISRI driver’s seat with headrest, weight adjustment via control valve - LED rotating beacon mounted on cab with flexible bracket; folds when hitting obstacles - Rear LED rotating beacon on hopper, flexible bracket folds on impact - Work lights, left & right broom, LED - Headlight for suction nozzle, LED - Joystick swapping feature for front/side brooms - Water connection with spray lance Gedpfx Abei Haqhevetw

Condition: excellent (used), Year of construction: 2017, EXTRIM 260 , Year 2017 Reliable and fast electric trimmer with a self-sharpening circular rotating blade for flexible materials. Designed to improve your productivity every day with great precision and speed. It cuts materials up to 1,8mm (0,07 in.) in thickness and its cutting speed is adjustable up to 100 m/min. (328 ft/min.). Electrical trimming machine designed to improve your productivity every day with great precision and speed. It cuts material up to 1,8mm (0,07 in.) in thickness. Adjustable cutting speed up to 100 m/min. (328 ft/min.) Innovative “Accu View” cutting system that allows choosing between two working modes: the first one ensures maximum speed, the second one guarantees absolute accuracy. Unique trimmer on the market thanks to its cutting unit mounted on a linear recirculating ball bearing system for long lasting operations Gsdpfxovvtbho Abvetw useful LED illuminating system to make the cutting easier. Solid construction to satisfy high performance over time. Frame on wheels, easy to be moved around and space saving. SUITABLE MATERIALS : Paper. Cardboard. Polyester film. PVC banner (up to 900 gr/m2 - 27 oz./ya2). Digital printing supports. Laminated prints. Polycarbonate film. Polypropylene PP-film (up to 1,2 mm - 0,04 in.). Reflective film. Canvas & TNT. Magnetic rubber. Price under request

Condition: excellent (used), Year of construction: 2010, operating hours: 1,318 h, functionality: fully functional, input voltage: 240 V, input frequency: 60 Hz, We offer a used Kodak NX Imager, model Flexcel NX Digital Flexographic System, year of manufacture 2010. Machine set includes: • Imager (Exposing unit) • Laminator • Vacuum cleaner Bonus: Densitometer Machines are in excellent technical condition Laser: 1,318 h, like new, tested Checked and secured for transport by authorized Miraclon service, documented with invoice RIP station requires update due to Windows 10 Full documentation included Cabling, TIL input glass included (disassembled for transport) Laser secured by Miraclon, also disassembled for transport Gjdpfx Aboyrr I Aevotw Serial number: TT0531 Date of manufacture: 2010/09/15 Model: TST Rated voltage: 200-240 V Frequency: 50/60 Hz Rated current: 8 A Country of manufacture: China For any questions or if you require additional information, please contact us via email or telephone.

Condition: used, mileage: 42,813 km, power: 130 kW (176.75 HP), first registration: 05/2021, fuel type: diesel, empty load weight: 1,800 kg, overall weight: 3,100 kg, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 3, total length: 5,306 mm, construction height: 1,880 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, * Schedule an appointment for consultation and test drive = shorter waiting times: * Time is valuable, and you shouldn't spend it waiting. Therefore, we kindly ask you to make an appointment by phone for consultation or a test drive. * Non-smoker * Service booklet * This vehicle has a well-maintained service history. * Last service was performed at 34,680 km. * WÜRTH shelving system TRANSMISSION / CHASSIS * Engine 2.0 Ltr. - 130 kW CDTI * Drive type: Front-wheel drive * Automatic transmission with Start/Stop (8-speed) LIGHTING & VISIBILITY * Driver Assistance System: High Beam Assist * LED daytime running lights * Automatic headlight activation * Windscreen wipers with rain sensor * Fog lights ENTERTAINMENT * Onboard computer ASSISTANCE SYSTEMS & SAFETY * Park pilot system front and rear * Driver Assistance System: Blind Spot Assist * Driver Assistance System: Traffic Sign Recognition * Brake Assist * Driver Assistance System: Hill Start Assist (HSA) * Driver/Passenger airbags COMFORT * Air conditioning * Design package * Opel Connect * Multimedia Navi Pro audio navigation system * Partition wall with window in load compartment * Heated front seats * Cabin seats: Multifunctional front double passenger seat * Rear wing doors with glazing * Reversing camera with 180° surround view * Increased payload * Visibility package * Assistance package 1 * Body type: Panel van * Body variant: Vehicle length L3 * Headlight range control * Heat-insulating windshield (Solar-Reflect) * Passenger airbag * Flooring: Rubber luggage/load compartment floor * Sliding door on right * Interior mirror, auto-dimming * Socket (12V port) in cargo/load compartment * Socket (12V port) in center console * Driver Assistance System: Drowsiness detection sensor * Adjustable steering column (steering wheel) * Wheelbase 3275 mm * Transmission variant - Automatic - Type: AMN8 (8-speed) * SCR system (AdBlue technology) * Low emissions according to Euro 6d-TEMP * BLACK/BISE GREY INTERIOR * Spare wheel not included * C. ARCHITECTURE EE ECO * Removal of 2nd seat row: Removal of 2nd + 3rd row of seats * No adjustment option * Windscreen PVC coated * BREAKING POINT WINDOW 4 * Control code * German specification * Manual sliding door * Sun visors driver & passenger without mirror * Diesel E10 compatibility * PACKAGE TRIM LEVEL 3 * ENGINEERING YEAR 2021 * 2 folding ignition keys * MARKETING AREA EUROPE GROUP * Equipment part transmission * Electrical package * Reading lights, 3rd row * Meltem fabric grey/black leatherette * Rear interior lighting * Vehicle Type Commercial N1 * Jade White/Arctic White * Four speakers * Instrument display/onboard computer * Driver seat with armrest, 3-way adjustable * Comfort driver seat, 6-way manual * Power windows with jam protection * Front interior and reading lights * Manual handbrake * Wheel hub cover * Steering wheel paddles: Steering wheel remote control * Start/Stop system * And much more * The above information is not guaranteed and does not constitute an agreed specification. Subject to errors and prior sale. * Our services: * Financing possible even without down payment * Registration service * Trade-in of your old car * Delivery available * Tire service, winter and summer tires available at extra cost Gedpfx Absxv Uyusvjtw * We speak several languages: * English, French, Span

Condition: used, Year of construction: 2009, Manufacturer: Albagnac Model: Nerva II Type: Labelling machine Gsdpfx Abox R D Awjvetw Year: 2009 Application arm for dispensing labels on packaging (cartons, ...) - Detection cell - Variable feed speed - Adjustable height - Counter/countdown timer - Chuck DN: Ø 76mm - Max. external DN Reel: Ø 300 mm - Label height: max. 170 mm - Label printing: opendate module - Label detection: photo cell - Product detection: direct reflection cell

Condition: used, Year of construction: 2014, fuel type: diesel, motor manufacturer: S16R-Y2PTAW2, Field of application: Construction Empty weight: 14.500 kg Generator capacity: 2.590 kVA Frequency: 60 Voltage: 254 Transport dimensions (LxWxH): 590x223x255 Please contact Sales Department for more information Over 80 years experience in maintenance. Gtsdpfx Abovyn Iqjvsw Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: used, Year of construction: 2014, fuel type: diesel, motor manufacturer: S16R-Y2PTAW2, Field of application: Construction Empty weight: 14.500 kg Generator capacity: 2.590 kVA Frequency: 60 Voltage: 254 Transport dimensions (LxWxH): 590x223x255 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately. Gtjdpjvyn Ikofx Abvow

Condition: used, Year of construction: 2014, fuel type: diesel, motor manufacturer: S16R-Y2PTAW2, Field of application: Construction Empty weight: 14.500 kg Generator capacity: 2.590 kVA Frequency: 60 Voltage: 254 Transport dimensions (LxWxH): 590x223x255 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Gsdpjvyn Idjfx Abvetw Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: used, Year of construction: 2021, fuel type: diesel, motor manufacturer: C32, Field of application: Construction Empty weight: 18.221 kg Generator capacity: 1.100 kVA Frequency: 50 Gjdpfxsvyn A Uj Abvjtw Voltage: 230 Transport dimensions (LxWxH): 20 ft HC container Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: used, Year of construction: 2010, machine/vehicle number: LC601, Technical Specifications & Performance Data This complete PET hot-fill bottling line is a high-efficiency used bottling line engineered for juice applications. Built primarily in 2010 with downstream equipment from 2011, it delivers consistent production at 24,000 bottles per hour (bph). The line integrates blowing, hot-fill filling, capping, labeling, secondary packaging, and palletizing, providing a cohesive solution for beverage production and industrial packaging needs. Gsdpfxoyipa Re Abvjtw Production speed: 24,000 bph Primary application: Hot-fill juice Container handling: PET bottles Validated format example: 0.5L Manufacturing years: 2010 (core equipment), 2011 (palletizer) Core components: Krones blow molder; CFT hot-fill filler-capper; DASE-SING labeling machine; DIMAC shrink wrapper; TCP bottle cooler and sterilizers (models T30R, TU170RD); TBC palletizer (model LT400) Line type: Blow, fill, cap, label, wrap, and palletize Configuration: Integrated continuous production with matched throughput across stations Advanced Automation & Control Systems The line is designed for synchronized operation from container production to end-of-line packaging. Coordinated controls help maintain stable performance at high speeds and reduce bottlenecks across blowing, filling, labeling, and packaging stations. Operator interfaces facilitate routine adjustments and monitoring, while safety interlocks and guarding support reliable operation in a production environment. Centralized line control with coordinated drives for consistent throughput Operator-friendly interfaces for speed matching and format adjustments Safety guarding and interlocked access doors Emergency stop circuitry across critical stations Quick-change features to support format and product adjustments Production Line Integration Capabilities This second hand bottling equipment set is engineered to function as a complete packaging line for PET juice, from bottle blowing through palletizing. It can integrate with upstream utilities and downstream warehouse systems. Format changes are supported to align with market requirements, with confirmed capability on 0.5L PET and suitability for similar cylindrical PET formats. Inline operation from blow molding to palletizing Compatible with PET cylindrical bottle formats; validated at 0.5L Hot-fill processing designed for juice products End-of-line shrink wrapping and palletizing for stable distribution packs Potential to adapt speeds and formats within the design envelope of each component Machine Condition & Maintenance History The line is currently in production, reflecting regular operational use suitable for immediate deployment after relocation. Component years indicate modern engineering with durable construction standards expected from the listed manufacturers. It is a used bottling line that has been maintained in an industrial beverage environment. Operational status: In production Core equipment years: 2010; palletizer: 2011 Well-known OEM components to support parts and service availability Operational Per...

Condition: used, mileage: 96,318 km, power: 338 kW (459.55 HP), first registration: 11/2023, fuel type: diesel, empty load weight: 8,027 kg, maximum load weight: 9,973 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Year of construction: 2023, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, onboard computer, parking heater, traction control, Color: White, unladen weight: 8,027 kg, gross vehicle weight: 18,000 kg, 1st axle: 315/60 R22.5, 2nd axle: 295/60 R22.5, air suspension, retarder, digital tachograph, fifth wheel: +GF+ SK-S36.20 2/128, -510 mm, electronic braking system (EBS), electronic stability program (ESP), traction control (ASR), automatic climate control, stationary air conditioning, adaptive cruise control (ACC), air-sprung driver's seat, seat heating, ride height control, LED headlights, automatic driving lights, headlight range adjustment, radio, Bluetooth hands-free kit, Scania lane departure warning system, rain sensor, adjustable steering column, electric windows, roof hatch, outside temperature display, roof spoiler, fog lights, electrically adjustable and heated exterior mirrors, heated kerbside mirror, wide-angle mirror, immobilizer, central locking, tinted windows, wind deflector, sun visor, refrigerator, axle load display, hill-start assist, LED daytime running lights, 1x 15-pin connector, coasting function, telematics system, speed limiter, side paneling, upper and lower bed, EGR, SCR, former rental vehicle, non-binding offer, errors and prior sale reserved. Image may not reflect offer. Offer no. UVB250291. Gtjdpfjyiglhex Abvow

Condition: used, maximum load weight: 36,755 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire stock of vehicles, including those available immediately or at short notice, on our website. Excerpt of equipment features. Full specification available upon request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Loading platform approx. 30 mm thick timber flooring, set in Omega profiles * 10 pairs of folding lashing rings (LC 2,500 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Loading width approx. 2,480 mm Landing legs: * JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Axles: * BPW air-suspended axles with disc brakes (approx. 430 mm), with lift/lower function (ET 120) * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Axle toolkit Tyres: * 385/65 R 22.5 tyres Brake system: * Brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * High-quality single-colour 2-component (2K) top coat in RAL 3002 carmine red * Rear section metallised and coated in RAL 9010 (pure white) Including the following additional equipment: Gjdpfsya Shlsx Abvotw * Yellow-red air couplings at the galvanised front connection rail * 2" king pin * Yellow reflective tape to EU regulations, fitted to sides, extension and rear of trailer * European reflective warning boards (red-yellow) at the rear of the trailer * Loading platform approx. 30 mm thick timber flooring, set in Omega profiles * Holder for approximately 1,000 mm long stakes, mounted at rear central beam * 1 spare wheel holder under the loading platform, left side * Bracket for rotating beacon at the rear of the trailer * At the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Load pressure gauge for axle load determination including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Folding aluminium side boards with rear double-wing doors (anodised), on the sides of the loading platform, approx. 600 mm high, with KINNEGRIP folding posts * Holder for aluminium side boards, mounted under the platform before the axles * Holder for KINNEGRIP posts, under the platform behind the axles * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, fitted to the outer frame of the platform * Rear underrun protection, left and right on the rear traverses * 6 pairs of WADER container locks in the platform, for 1x 20' container, 2x 20' containers or 1x 40' container * 1 INOX toolbox, approx. 600 x 350 x 600 mm, fitted under the platform left side * 4 pairs of stake pocket strips fitted longitudinally on the loading platform, for plug-in stakes 100 x 50 mm * Lifting axle on the front axle, controlled by TEBS E in line with current axle load and loading condition * On the warning boards, holder for beacon * Acoustic reverse warning signal * 2 LED reversing lights mounted on rear panel * HRM (High Resistance Metallisation) metallisation of outer frame

Condition: new, Year of construction: 2025, functionality: fully functional, The Aberlink Azimuth CNC Coordinate Measuring Machine (CMM) is the largest model in our range and reflects over twenty years of experience and excellence in developing innovative metrology. It has been specifically designed for the precise measurement of large and heavy workpieces weighing up to 6000kg. The revolutionary bridge design incorporates aluminium honeycomb core panels originally developed for Formula 1 and aerospace. This design offers a remarkable stiffness to weight ratio that improves both the performance and speed of the Azimuth. With travels of X 1200mm, Y 2000 or 3000mm and Z 1000mm and volumetric accuracy of up to (2.6 + L/250)µm, the Azimuth ensures the highest precision. Gjdpjvwbabsfx Abvstw The scale resolution is 0.1µm. A specially designed load plate system allows heavy components to be placed directly on the granite base, transferring the load directly to the floor without affecting metrological performance. The user-friendly Aberlink 3D measurement software enables a short training period, so that even without prior knowledge, precise measurements can be taken. Free software updates ensure that the system is always kept up to date.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1746, shaft length: 10,564 mm, laser power: 100 W, type of cooling: air, working range: 1,750 mm, overall weight: 205 kg, table height: 1,760 mm, table length: 12,000 mm, table width: 9,200 mm, Equipment: cabin, Used fiber laser system for laser marking, engraving, marking, and microstructuring on metals and plastics. Ex-display machine, laser class 1, CE-compliant, Made in Germany. Laser & Beam Source - IPG Ytterbium fiber laser - Power: 100 W - Wavelength: 10564 nm - Pulse energy: 0.2–1.0 mJ - Cooling: Air-cooled, no external cooling required - Power supply: 230 V / 50 Hz - Scanner: X-Y galvanometer with mirror mount for 1064 nm Note: Manufacturer’s lab values; actual values may vary depending on the application. Scanner & Control - F-Theta lens: f = 254 mm, anti-reflection protective glass - Marking field: 175 × 175 mm - Max. scan speed: 4 m/s Industrial PC with Windows 11 Pro, SSD storage - Controller cards for laser & scanner - Digital & analog interfaces: RS232, Ethernet, USB - Custom adaptations optional - 19" TFT color monitor, keyboard & mouse - SK CONTROL software - Industrial software for texts, logos, QR codes, variable data - Intuitive user interface, logo/photo import via mouse click - Job management and parameter library for reproducible quality - Pilot laser displays laser position as red rectangle Workstation 1 – SK LASER - Enclosed laser class 1 workstation - Combined sitting/standing workstation - Aluminum profile housing, front door with laser safety glass, bright work lighting Gtsdpsyfvhgofx Abvjw - Dimensions: H 1760 × W 920 × D 1200 mm - Stainless steel worktop with 25-mm hole grid, 710 × 400 mm - Motorized Z-axis, travel 500 mm (gross) - Rear door for oversized workpieces (when open: laser class 4) - Extraction nozzle DN50 for fume extraction - Redundant safety equipment: emergency stop, interlock, safety relay performance level 4 - Operating temperature: 15–35°C - Connection load: 230 V / 50 Hz Condition & Delivery - Ex-display, tested machine - Optionally: Delivery including commissioning within Germany

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,600 mm, laser power: 60 W, type of cooling: air, total width: 800 mm, total height: 1,800 mm, total length: 1,700 mm, working range: 1,200 mm, warranty duration: 6 months, height adjustment type: electric, table height: 7,000 mm, table length: 4,000 mm, Equipment: cabin, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Specifications - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air cooling - Power supply: 230 V / 50 Hz - Scanner & optics - X-Y galvo scanner with mirror mount - F-theta lens: F = 200 mm, anti-reflective protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Fully enclosed workstation - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Control & Software - Industrial PC Marking software: - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap - Intuitive, user-friendly interface Scope of Delivery & Safety - Complete machine, workstation - 6-month warranty - CE certified, TÜV-tested Condition & Delivery - Refurbished, technically tested Gsdpfxsyfucvj Abvjtw Offer valid ex works plus shipping, while stocks last

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 6,500 mm, type of input current: three-phase, type of cooling: water, compressed air connection: 13 bar, overall weight: 5,500 kg, total length: 14,800 mm, total width: 2,900 mm, total height: 2,525 mm, warranty duration: 24 months, year of last overhaul: 2026, working range: 6,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Centre 6500 x 15–160 mm with bevel cutting up to 50° skytube-pro-6500 X3 Profile and Tube Laser | Fiber Laser Metal Cutting for fast material change with up to 6kW — the smart and efficient tube laser processing solution for your production! Designed for round tubes, square tubes, rectangular tubes, open profiles, and special profiles. This laser cutting machine delivers maximum productivity, especially during production changeovers. The task: fiber laser up to 6kW for a wide range of metalworking applications. Unmatched Laser Cutting Performance High axis speeds and accelerations, paired with a stable mechanical structure, provide excellent cutting performance and accuracy. The tube and profile laser processing machine for production — space-saving and simply smart! Innovative solutions 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm 3D cutting with efficient fiber laser technology The semi-automatic 6-fold profile tube loading chain system enables fast job changeovers. With the optional bundle loader, you can work completely independently. Bevel Cutting A function that changes everything. With our machine’s ability to swivel its cutting head up to 50° on an additional fifth axis, we address one of the biggest challenges in modern profile machining. If the laser beam always strikes the tube perpendicular to the surface, the cut edge will be elliptical. Swiveling the tube laser’s cutting head, combined with the feed axis, enables true bevel cutting. With the skyTUBE Laser, you are always on the safe side! The skyTUBE Pro is a class 1 laser system — there is no risk of exposure to laser radiation or reflections during operation. For all our laser systems, safety and compliance with the highest standards and regulations are paramount. Gtjdpfeyh A Nyex Abvew Technical Features: · Closed industrial housing, class 1 or optionally class 4 laser · Working area, tube cutting system/clamping system: uniform tubes 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on tube X 6500 Y ±100 Z 150 A ±360° U ±50° · Automatic material feeding: up to 6 x 160 mm profiles, 3500–7000 mm lengths · Automatic material unloading system for profile sections, design matched to profile lengths · Z drive system: ball screw axis system with PTI SVZ system · X/Y drive system: linear axis system with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min depending on material and laser combination (1.4G) · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (W x D x H): 11,600 mm x 2,830 mm x 2,100 mm + unloading system, depending on required profile cut length. With standard version and 4.5 m automatic unloading, the total length is approx. 14,800 mm.

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Gtodpfx Aow Titlebvew Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: used, Bruker Type: Tensor 27 IR spectrometer Gjdovwcikspfx Abvjtw Full sample flexibility. The improved QuickLockTM mechanism and the locking button on the front even bulky accessories can be installed quickly and, above all, safely. The INVENIO can also be equipped with three software-controlled beam outputs for a variety of external modules. FPA micro and macro imaging Variable external sample chamber (left and right) for individual experiments Fiber optic coupling to fiber probes for liquids and solids Integration sphere Autosampler for liquids High-throughput analysis module HTS-XT Reflection unit for the air-water phase boundary Much more! Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Stäubli Measuring Robot Here we offer a very well maintained Stäubli measuring robot. Measuring robotics to measure, analyse and evaluate quality features RobFlow (measuring robotics software) full version and dongle on integrated Siemens industrial PC 6AG4114-1NC22-4EX0 Laser Distance Sensor Model ILR 1181-30 Technical data: Measuring range 0.1 ... 50 m on natural, diffuse reflecting surfaces, 50 m to a maximum of 150 m on reflector panel Linearity ±2 mm (+15°C ... +30°C), ±5 mm (-10°C ... +50°C) Resolution 0,1 mm Gtjdpfx Asfz Dhtsbvew Repeat accuracy ≤ 0.5 mm Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at 10 m distance Beam diameter < 35 mm at 50 m distance Beam diameter < 65 mm at 100 m distance Laser divergence 0.6 mrad Operating temperature -10°C ... +50°C Storage temperature -20°C ... +70°C applications: RobFlow is a modular system, the range of functions of the standard package can be extended by additional Plugins for special tasks as well as customer-specific extensions can be added. With the help of the available functions, the following applications can be implemented, for example: Infotainment tests: Optical and haptic tests Single actuations and path movements straight, meandering, curve segments Analysis and evaluation functions Steering column tests: Haptic tests along complex paths Wide measuring range due to multiple calibrated Force/torque sensor Easy to [...]

Condition: used, PANalytical PANalytical X’Pert PRO MPD X-ray Diffractometer (XRD) Excerpt from the service report: Device: PANalytical X’Pert PRO MPD Report date: 07.07.2021 Work performed: - Reinstallation and commissioning of the system - Connection of external supply lines - Warm-up phase - Complete alignment of goniometer and additional components - Maintenance carried out, including replacement of defective parts Spare parts used: L 3.6V NC/U3 R15.0X52.0 BATTERY. NI-CD FAN FOR X-CELERATOR UNIT FILTER, WATER Motor PW3050 ("Device was not tested in-house") The X’Pert PRO MPD is a highly versatile and powerful X-ray diffractometer (XRD) designed for structural characterization of crystalline materials. It is ideal for pure research as well as routine applications in industry and academia. Thanks to its modular design, fast detection, and control of temperature and atmosphere, it is excellently suited for both routine analyses and complex in-situ experiments. Key features: - Multiple measurement geometries possible: - Reflection measurements in Bragg-Brentano (θ–2θ) mode - Transmission geometry for powders in capillaries - Optional SAXS (Small-Angle X-ray Scattering) for nanostructure analysis - Radiation source and detectors: - Typically copper anode (Cu-Kα, λ ≈ 1.54 Å) - X’Celerator detector (1D, ultra-fast) for parallel data acquisition - Modular system with PreFIX technology: - Rapid change of optics and sample stages without recalibration - In-situ measurements at high temperatures: - Measurements up to approx. 1200°C possible - Controlled atmosphere: air, nitrogen, oxygen (limited for reducing atmospheres) Typical applications: - Phase analysis and quantitative Rietveld refinement - Determination of crystallite size, microstrain, residual stress - In-situ investigation of phase transitions, oxidation, crystallization, etc. - SAXS measurements for analysis of nanoparticles and pore structures - Broad range of sample types: powders, thin films, ceramics, pharmaceuticals, catalysts, and more Technical data (typical) Property & Specification Angle range (2θ): approx. 0.5° to 150° Step size: up to 0.002° or finer Goniometer: vertical, 0–0, radius approx. 240 mm Temperature range: room temperature up to approx. 1200°C Atmosphere: air, N₂, O₂ (limited for reducing atmospheres) Detectors: X’Celerator (1D), proportional counter Distribution & application areas: The X’Pert PRO MPD is in use worldwide at, for example: - Universities (ETH Zurich, TU Dresden, University of Vienna) - Research institutes (e.g., Max Planck Institutes, ICN2, IS2M) - Industry (e.g., materials development, pharmaceuticals, chemistry) Gedpfxewycats Abvotw Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: used, Trumpf TRUMPF TruDisk 6602 (4C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering approximately 6.6 kW of continuous power output – perfectly suited for welding, cutting, and surface treatment processes for metals such as steel, aluminum, copper, etc. System type: TruDisk 6602 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Gtodowy Uyxspfx Abvsw Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No further in-house inspection has been performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. Key Technical Features: • Power: Continuously adjustable from 80 W up to 6,600 W, max. 6.6 kW for machine tool applications • Beam quality: < 2 mm·mrad for excellent focus handling • Wavelength: 1030 nm (infrared), adaptable to green wavelength for specific models • Output options: Up to 4 laser outputs (4C) for simultaneous supply of multiple process cells • Cooling system: Integrated heat exchanger (up to 28°C inlet temperature), optional compressor cooling (up to 38°C) • Modular and service-friendly: Compact footprint (< 1 m²), modular components for fast maintenance and service Benefits & Applications • Maximum process stability: Real-time power regulation ensures reproducible results • Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum • Industry 4.0 ready: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance • Energy efficiency: Up to 50% reduction in power consumption thanks to intelligent pulse control and energy-saving modes • Versatility: Application range includes welding (including BrightLine for nearly spatter-free seams), cutting, hardening, casting processing, additive manufacturing, laser wire deposition welding, and more Suitable Use Cases: Ideally suited for industrial high-power laser applications: Application | Features ---|--- Automotive structural part manufacturing | Deep penetration welding with high reproducibility Copper welding | Particularly suitable with green wavelength (> 95% spatter reduction) Remote hybrid welding | Fast processing of large surfaces with robust beam Additive manufacturing & hardening | Enabled by excellent beam quality and compact design Main Technical Data Property | Specification ---|--- Laser power | Up to 6,600 W (6.6 kW), continuous Beam quality | < 2 mm·mrad Wavelength | 1030 nm (infrared) Number of outputs (4C) | Up to 4 simultaneously usable fiber outputs Fiber connector diameter | 100–600 µm (depending on configuration) Beam delivery | Fiber-based, passive (no deflection mirrors required) Cooling | Water/air-cooled, internal or external chiller Dimensions | Approx. 1000 × 800 × 2100 mm (W×D×H, variant-dependent) Weight | ~800–1200 kg (excluding cooling) Power supply | 380 V - 10% ... 460 V +10%, 3-phase AC + PE, 38 kW / 41 kVA, 59 A / 400 V, 50–60 Hz Control | TruControl 1000/3000, OPC-UA interface Safety standards | Laser safety class 4 according to EN 60825-1 Weight: approx. 1200 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data. Information may be subject to alteration!) We are happy to answer any further questions you may have by phone.