Used Registration Punch for sale (8,574)

Condition: used, Year of construction: 2025, Drivetrain Drive: Wheel Weights Empty weight: 60.000 kg Functional Lifting capacity: 150.000 kg Identification Serial number: 51508182 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 44500 Transport dimensions (LxWxH): 14.64x2.75x3.99 Additional information Cjdpfx Afsxbxpdjljrk Please contact PFEIFER GROUP for more information

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F-500, working width: 530 mm, type of input current: AC, input voltage: 400 V, overall weight: 200 kg, space requirement height: 1,070 mm, space requirement length: 1,100 mm, space requirement width: 710 mm, input current: 15 A, year of last overhaul: 2024, input frequency: 50 Hz, empty load weight: 200 kg, cutting length (max.): 530 mm, product width (min.): 530 mm, Electric Punching Machine 530 mm. maximum punching width. Complete with 3:1 punching tools for books. Other punching specifications are available, such as 2:1 and spiral coils. POA. Maximum punching thickness per stroke: 2.5mm. Maximum output: up to 1,000 punching per hour, depending on materials used and skills of the operator. Cjdpfx Afjrzuf Delsrk Power: 400v 3 phase 50/60 Hz Dimensions: H 1070 x D 710 x L 1100 mm Weight:195 Kg nett

Year of construction: 2016, condition: ready for operation (used), Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible. Crsdpfsxq Exwsx Aflek

Year of construction: 2000, condition: used, Muhr and Bender KLS 1100 Punching capacity 110 clay Diameter x sheet thickness Crodjlzc Dcopfx Aflsk Ø 40 in 22 mm throat 500 mm Max. hole diameter 80 mm Maximum cutout thickness 22 mm Knife length 500 mm Max material thickness by notching 16 mm Motor power 8 kW Weight 5500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 21,346 h, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment Credpfoxhmtwsx Aflsk - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Condition: used, Druckpalttenstanze  - Plate Punch Bacher 2048 Palttenstanze / Plate Punch Bacher 2048 Serial-No. 277 Druckplattenstanze für Heidelberg SM74, SORM Plate Punch for Heidelberg SM74, SORM Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Cedpoxg D Dwjfx Aflerk On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), functionality: fully functional, power: 51 kW (69.34 HP), fuel type: diesel, axle configuration: 4x4, empty load weight: 5,500 kg, maximum load weight: 500 kg, Year of construction: 1983, operating hours: 13,859 h, Truck/Tractor Unit MB-Trac 700K with hydraulic arm, registered as a tractor unit. We would be happy to demonstrate the vehicle for you. It is in good overall condition, fully operational, and immediately available. Technical specifications: Hydraulic arm: Tirre 9001 loading crane Max. outreach: 7.4 m Cjdpfsxvyv Uox Aflsrk Max. lifting capacity at max. outreach: 1,100 kg Max. lifting capacity at min. outreach: 1,100 kg Permissible total weight: 3,500 kg Transmission: 4-speed (split range/hare/tortoise gear) Engine: MB Daimler, 51 kW Displacement: 4 l Year of manufacture: 1983 Axle configuration: 4x4 Operating hours: 13,859 km Unladen weight: 5.5 t Gross weight: 6 t Gross weight with trailer: 40 t Body length x width: 104 cm x 220 cm Hydraulic connections for additional equipment at the front and rear + PTO shaft connection. The vehicle is equipped with four new tires plus a spare wheel.

Condition: good (used), machine/vehicle number: 550C08, A used punching PEDDINGHAUS with large throat and large plate with attacks Cutting capacity 45 tonnes Stroke rate 40 strokes/min Projection 762mm Arbeitshöte 1110mm Crjdpfxsd Hxrts Aflok

Condition: new, functionality: fully functional, Year of construction: 2023, New Sunrise punch cutting machine IW-45K available from stock. Specifications IW-45K tonnage 45ton Codjvf I Ibjpfx Aflsrk punching capacity ᴓ 22x15mm/ᴓ 40x8mm discharge 165mm angle bar 75x75x6mm 90⁰ strip 300x10mm Weight 870 KG Dimension 1050x760x1490mm Multiple models available from stock.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Maximum sheet thickness: 6.4 mm Punching diameter: 76.2 mm X-axis travel: 2,500 mm Y-axis travel: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed rotary axis: 360 °/sec Workpiece weight: 150 kg Smallest programmable increment: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions: 6,400 x 5,800 x 2,100 mm Approx. machine weight: 11,050 kg Crjdpoxhfu Hsfx Aflsk Operating hours: 30,430 h

Condition: good (used), Year of construction: 2005, 500mm x 25mm Capacity. Punching / Shearing / Marking capacity. Cjdpfevzg Uxex Afljrk Mitre shearing.

Condition: used, Pneumatic toggle press BURGER type D04 No. 4497 Year of construction approx. 1972 Compressive force max. 6 ton. Projection 150 mm Cedpfx Aevcdvpsfljrk ram stroke 39 mm Table size 340 x 270 mm Drop-through opening Ø 46 mm Installation height max. 160 mm Tool holder Ø 25 mm ram plate Ø 90 mm Pneumatic operating pressure 5 bar Mains connection 220 V 50 Hz - Pressure regulator for press force adjustment - stroke height adjustment 7, 21, 40 mm - electric foot switch - Table height adjustment Space requirement L x W x H 700 x 500 x 1300 mm Weight 240 kg good condition

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 7360 Measurements depth 6750 mm Measurements height 2310 mm Machine weight 12960 kg Control Unit Brand SIEMENS Model Sinnumeric 840 Movement X-Axis Movement 2500 + R mm X-Axis Rapid Traverse 100 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 75 m/min Max Material Thickness Steel 6 mm Stainless steel 3 mm This Durma TPL93 turret punch press was manufactured in 2019. It's a robust choice for precision punching operations. Consider the opportunity to buy this Durma TPL93 turret punch press. Contact us for more information. Application Types Punching Crsdpfjxuw H Uex Aflek

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Crsdsff Apiepfx Aflok Stroke 20 mm

Condition: used, Year of construction: 2015, Carrying capacity: 31.880 kg GVW: 7.120 kg Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Front tyre size: 385/65-22.5 Codpfx Afetr H Ifoljrk Rear tyre size: 385/65-22.5 Please contact PFEIFER GROUP for more information

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Codpfxoxhfnae Aflerk Working area: 3,000 x 1,500 mm Max. punching force: 220 kN Max. sheet thickness: 6 mm MACHINE DETAILS Dimensions & Weight Dimensions: 7,500 x 7,500 x 2,500 mm Approx. machine weight: 17,500 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, total width: 4,000 mm, total length: 5,000 mm, total height: 3,000 mm, overall weight: 7,500 kg, working width: 2,000 mm, punching force: 50 t, Working width: 2000 mm Punching head: 650 x 650 mm Punching head has mechanically adjustable low-point stops and can be rotated (with a digital counter for the punching depth to simplify adjustment) Punching pressure: 50 t Punching belt with automatic clamping jaw feed including oscillating belt Machine features a CNC control system Unwinders are not included Punching machine runs smoothly and is still ready for use Crodpewlu N Defx Aflsk

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition Crjdjrz Tutepfx Aflek

Condition: ready for operation (used), Pressure force: 10 tons Projection: 110 mm Crodpfohtq Hfjx Aflok Required space: 300 x 170 x 680 mm Weight: 32kg

Condition: good (used), functionality: fully functional, Due to cessation of operations at the Norderstedt site, for sale as-is, not loaded. Kugler Paternoster punching machine, suitable for Wire-O and index tabs Format 50 x 50 cm Includes 2 punching tools Csdsrn R Rfopfx Aflork Final price reduction!!!

Year of construction: 1985, condition: good (used), Bobst SP 130 E Codpoif Ed Djfx Aflerk Year 1985 Max.size: 920x1300 mm Min.Size: 450x580 mm Max.Speed: 7000 Sh/h Max. cutting force Cutting force: 500 T Centerline Immidiately available.

Condition: used, Year of construction: 2002, Working area 3000x1500 mm Crjdpfx Afsxfh Tyjlok Max. punching force 220 kN Max. sheet thickness 6 mm Dimensions 7500 x 7500 x 2500 mm Machine weight approx. 17,500 kg

Condition: like new (used), Year of construction: 2000, Renz Super 700 and heavy-duty paper drilling machines. Heavy-duty machine with a new drive system, designed for continuous drilling and perforating. Drilling width up to 700 mm (27.5″) on the Super 700. Simple operation via foot pedal. Csdpfx Asxu Uqkeflerk Horizontal paper feed guarantees accurate drilling on large formats. Additionally, this design allows for creasing or tear-off perforation at any position on the sheet. Open-ended construction allows for drilling double-length formats. Exceptionally high drilling capacity – another great advantage of the RENZ Super 700 is that punching dies from most competing manufacturers can be used by changing the mounting adapter. Die changeover is quick and easy. These machines can use split dies featuring two pitches or types in the same die, reducing setup time when changing punching patterns.

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Crjdpeltrmujfx Aflek Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: used, Year of construction: 2001, operating hours: 13,030 h, machine/vehicle number: 090038, punching force: 2,200 t, We are offering our Trumatic 5000R laser punch press for sale. The machine is used and in very good condition. Basic data from the type plate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - working area 3070x1660mm - max. sheet thickness 8mm - Rotation axis of the tool head C1 and C2 - Forming function - Thread function - Multibend function - Pneumatic press - automatic sliding of the details 500x500mm - water-cooled servomotors Additional equipment of the machine: - light barrier Softpunch function - Details slide sensor - Device for blowing out small details - System for chip extraction - Separate lubrication of punching and threading tools Number of NC units: 13030h We sell machines without tools. Machine regularly maintained by authorized Trumpf service with original spare parts, last machine maintenance on 21.02.2024r. Crsdpfx Asunh D Dsflok