Used Reiss Ordinat Iii for sale (780)

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2011, total length: 8,400 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 6,770 mm, Year of construction: 2011, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Lift axle - Aluminum rims - Air suspension - Disc brakes Fedpfjz Nm Rkox Al Sogh = Notes = 2011 Van Hool 20FT ADR (EX/II, EX/III, FL, AT) chassis with ABS/EBS, Mercedes-Benz axles with disc brakes, lift axle on the 1st and 2nd axles, galvanized chassis, ALCOA rims, rear entrance, unladen weight: 3,300 kg, permissible gross weight: 39,000 kg, tires: 385/65-R22.5 (tread depth left: 5/3/6 mm; tread depth right: 5/6/6 mm), Dutch registration. = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: Mercedes-Benz dISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; lift axle; max. axle load: 9000 kg; tire tread depth left: 30%; tire tread depth right: 28% Rear axle 2: Aluminum rims; max. axle load: 9000 kg; tire tread depth left: 20%; tire tread depth right: 40% Rear axle 3: Aluminum rims; max. axle load: 9000 kg; tire tread depth left: 40%; tire tread depth right: 40% Weights Unladen weight: 3,300 kg Payload: 35,700 kg GVW: 39,000 kg Functional Body brand: Van Hool 3B2013 Condition Technical condition: very good Optical condition: good Identification License plate: OL-89-GP Further information Please contact Arne Honingh for further information.

Condition: new, Year of construction: 2017, SICK S30B-3011BA Safety Laser Scanner Features Design: Sensor without system connector Application area: Indoor Protective field range: 3 m Warning field range: 8 m (at 15% remission) Distance measurement range: 30 m Type of field set: Triple field sets Number of field sets: 1 Number of fields: 3 Number of monitoring cases: 1 Scanning angle: 270° Resolution (configurable): 30 mm, 40 mm, 50 mm, 70 mm, 150 mm Angular resolution: 0.5° Response time: 80 ms 1) Protective field offset: 100 mm Fgjdjpudqxopfx Al Sjh Number of multiple evaluations: 2 ... 16, configurable Delay of automatic reset: 2 s ... 60 s, configurable Safety-related parameters Type: Type 3 (IEC 61496) Safety Integrity Level: SIL2 (IEC 61508) Category: Category 3 (EN ISO 13849) Performance Level: PL d (EN ISO 13849) PFHD (mean probability of a hazardous failure per hour): 8.0 x 10-8 TM (service life): 20 years (EN ISO 13849) Function Restart lock: ✔ Protective device monitoring (EDM): ✔ Multiple evaluation: ✔ Contour as a reference: ✔ Integrated configuration memory: ✔ Measured data output: via RS-422 Secure SICK device communication via EFI: ✔ Connection type Connection type: System connector with or without connection cable Universal I/Os: 5 1) Inputs: Protective device monitoring (EDM): 1 2) Reset/Restart: 1 2) Stand-by: 1 Outputs: OSSD pairs: 1 Status outputs: 3 3) Type of configuration: PC with CDS (configuration and diagnostic software) Configuration and diagnostic interface: RS-232 Transmission rate: 38.4 kBaud Data interface: RS-422 Transmission rate: ≤ 500 kBaud Secure SICK device communication via EFI: Transmission rate: ≤ 500 kBaud Cable length: ≤ 50 m Conductor cross-section: 0.22 mm² 1) Freely programmable, e.g. protective device monitoring input, reset input, contamination warning, reset required. 2) Availability depends on the configuration of the universal I/Os. 3) Freely programmable, e.g. warning field, contamination, reset required. Protection class: III (EN 50178) EN 60950 Supply voltage Uv: 24 V DC (16.8 V DC ... 30 V DC) Current consumption ≤ 0.33 A 1) ≤ 1.7 A 2) Outputs: Safety outputs (OSSDs): 2 x 250 mA Status outputs: 3 x 100 mA 3) 1) At 24 V DC without output load. 2) At 24 V DC with maximum output load. 3) Freely programmable, e.g. warning field, contamination, reset required. Item condition: new, from stock clearance (without original packaging) Year of manufacture: 2017 You can find more scanners - new and used - in our shop! International shipping costs on request!

Condition: used, Year of construction: 2011, Perfect binding line Müller Martini Acoro A6 (3026-20) Year: 2011 Consisting of Gathering machine Müller Martini 1571 Year: 2011 - 2016 Description: - Hand feeding station - Number of gathering stations: 18 - ASIR Automatic Signature Image Recognition: ASIR III - ASAC automatic self adjusting calliper - Pump(s) - Set up element - Reject gate for incomplete products: 3715 - Transfer into the binder Perfect binder Müller Martini Acoro A6 (3026-20) Year: 2011 Description: - Semi automatic setting - Colour monitor with touch screen - Book Data Center: BDC - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS-A C80 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: MOD 40 Pot - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS C18 - Gauzing station - Drum cover feeder - Scoring station: 4 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini 3520 Year: 2011 - 2016 Description: - Transport system, length (approx): 40 mtr - Escape delivery Three knife trimmer Müller Martini Merit-S Year: 2004 Description: - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Müller Martini UNO Year: 2011 Fgsdpfxezzki Ns Al Seh Description: - Delivery to the right - Roller table delivery on the left Muller Martini Acoro A6: . Max. mechanical speed: 6.000 cycles/h Maximum size range: 430 x 320 x 60 mm Minimum size range: 140 x 100 x 2 mm Muller Martini Merit S: . Max. mechanical speed: up to 4.000 cycles/h Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 304 x 310 mm Minimum size (cutted): 136 x 100 mm Book thickness (min): 2 - 80 mm Muller Martini Uno: . Max. mechanical speed: up to 6.000 cycles/h Maximum size range: 500 x 320 x 80 mm Minimum size range: 140 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, mileage: 150,023 km, power: 105 kW (142.76 HP), first registration: 03/2018, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro6, total length: 6,961 mm, total width: 1,993 mm, total height: 2,612 mm, loading space length: 4,330 mm, loading space width: 1,780 mm, loading space height: 1,930 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Mercedes-Benz Sprinter II Box Van 314 CDI 4x2 !!! 6 identical Sprinters in stock !!! Wheelbase: 4325 mm Payload: 1144 kg Color: Silver Cargo area: Length: 4.33 m Width: 1.78 m Height: 1.93 m Special equipment: Fodpfxozr Stdo Al Segh Audio system Audio 15 (radio with color display), Outside temperature display, Roof control unit with reading light (driver/passenger side), Rear door (opening angle 270 degrees), Wooden floor in the cargo area, Metallic paint, Navigation system Becker MAP Pilot, Parktronic system (PTS), Rear stabilizer, Reinforced front stabilizer, Rear door step, Interior paneling in the cargo/passenger compartment: plastic, Auxiliary heater (air) electric, Generator 250 A Additional equipment: 3rd brake light, Adaptive brake light, Airbag (driver side), Washer fluid level indicator, Exterior mirrors, electrically adjustable and heated, both sides, Exterior mirrors with integrated turn signal, Battery 74 Ah, Braking system with ABS+ASR, Roof lining in the cab, Lockable glove compartment, Body/superstructure: box van with high roof, Child safety lock, Fuel tank: main tank 75 liters, Full-height cargo area partition, Load securing/tie-down points, Headlight range adjustment, Model update, Engine 2.1 L - 105 kW CDI CAT, Wheelbase 4325 mm, Tire repair kit with compressor, Low emissions according to Euro 6 emission standard, Sliding door, cargo/passenger compartment, right side, Safety belt system with warning system (driver side), Seat cover/upholstery: fabric Lima, Seats in the cab: adjustable passenger seat, Service interval display Assyst, Heat-absorbing glass, Permissible total weight 3.50 t Cargo area with shelving system We would also be happy to assist you with financing/leasing through our partners. All information without guarantee. Errors and prior sale excepted.

Condition: new, Holzprofi Circular Saw Blade, Circular Saw Blades in Various Diameters and Tooth Counts Made in the EU The Holzprofi saw blades are extremely durable and of carpenter quality – ideal for professional woodworking businesses as well as for DIY enthusiasts. Advantages and Features: Fodpjzrlnnofx Al Ssgh - High-quality carbide saw blade for precise and clean cuts - Long service life and high durability thanks to high-strength and large carbide saw teeth, allowing for more frequent resharpening Suitable for machines from many different manufacturers. If you have any questions, we will be happy to help! Available circular saw blades: SB200: Diameter: 200mm Bore: 30mm Tooth count: 48 / 60 SB216: Diameter: 216mm Bore: 30mm Tooth count: 24 / 48 SB220: Diameter: 220mm Cutting width: 2.6mm Bore: 30mm Tooth count: 14 SB250: Diameter: 250mm Bore: 30mm Blade body: 2.8mm Cutting thickness: 3.2mm Tooth count: 24 / 40 / 48 / 60 / 60 (ALU) / 80 SB250-60TFZ-N-ALU: Diameter: 250mm Bore: 30mm Tooth count: 60 SB300: Diameter: 300mm Bore: 30mm Tooth count: 20 / 28 / 48 / 60 / 72 / 72 (ALU) / 96 SB300-72TFZ-N-ALU: Diameter: 300mm Bore: 30mm Tooth count: 72 SB305-60N (suitable for SRO305): Diameter: 305mm Bore: 30mm Thickness: 2.2mm Blade body: 2.8mm Cutting thickness: 3.2mm Tooth count: 60 SB315: Diameter: 315mm Bore: 30mm Blade body: 2.8mm Cutting thickness: 3.2mm Tooth count: 28 / 48 / 60 / 80 SB350: Diameter: 350mm Bore: 30mm Tooth count: 32 / 54 / 72 / 84 SB400: Diameter: 400mm Bore: 30mm Tooth count: 28 / 36 / 48 Negative / 96 SB450: Diameter: 450mm Bore: 30mm Tooth count: 32 / 40 / 56 / 72 Prices from 48.00 Euro Prices depend on diameter and design If you have any questions about the correct size for your machine, please contact us; we will be happy to help.

Condition: used, table length 12000 mm table width 8000 mm Fjdpfx Aeyr Arfjl Sjgh table height 800 mm Thickness of the plate 300 weight of the machine ca. 82,5 t dimensions of the machine ca. 12x8 m 8 available All 8 panels measure 8000 x 12000 mm. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2019, operating hours: 21,000 h, clamping force: 1,270 kN, total width: 1,500 mm, total height: 1,700 mm, overall weight: 5,300 kg, product length (max.): 5,100 mm, This 3-axis SHIBAURA EC130SXIII-4A was manufactured in 2019. It features a clamping force of 1270 kN and a mold opening stroke of 400 mm. The machine has a maximum distance between platens of 950 mm and platen dimensions of 720 x 670 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC130SXIII-4A electrical injection moulding machine we have for sale. Contact us for further details. • Distance between tie bars (H x V): 510 x 460 mm • Platen dimensions (H x V): 720 x 670 mm • Mold opening stroke: 400 mm • Max. distance between platens: 950 mm • Mold height (min–max): 180–550 mm • Ejection force: 30 kN (3.0 tf) • Ejection stroke: 90 mm • Injection unit code: 14 • Nozzle touch force: 17.7 kN (1.8 tf) • Injection speed (standard): 300 mm/s Fjdpfey Iffnex Al Sogh • Injection speed (high torque): 200 mm/s • Injection speed (high speed): 400 mm/s • Main breaker capacity (standard/high torque): 100 A • Main breaker capacity (high speed): 125 A • Transformer (standard): 75 kVA

Condition: refurbished (used), functionality: fully functional, total width: 2,500 mm, total length: 7,000 mm, total height: 2,600 mm, The following applies to used equipment that undergoes a general overhaul: - New polyamide guide sleeves and sliders - Electrical systems and control elements are completely renewed and brought up to the 2026 technical standard Fgjdozazirepfx Al Seh - Complete replacement of hydraulic hose lines in the press and aggregate - Cylinders are reconditioned with new seal kits - Valid UVV/E-Check for 1 year - Steel structure is renewed if necessary Any special equipment is available upon request. The images shown are sample images of machines that have already been sold. Every inquiry or offer is tailored to the customer and their requirements.

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Fjdpfx Ajv T Un Dol Ssgh Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Machine documentation is available.

Condition: good (used), Automatic drill, drill press, drill press, stand drill, pillar drill -Spindle mount: MK 3 -Transmission -Automatic drill: with rapid traverse -Automatic drilling -Threading: automatic -Table size: 450 x 360 mm -Projection: 285 mm -Spindle stroke: 150 mm -Speed: 180-2000 rpm -Feed: 0.08-0.32 mm/rev -Dimensions: 900/1000/H2100 mm Fgsdpfxocghg Ue Al Ssh -Weight: 840 kg

Condition: used, Year of construction: 1980, Hydraulic guillotine shears, Kramer type TM III HY 2500 Cutting capacity 2500 mm Cutting thickness 12 mm elketr. backgauge Cutting gap adjustment Fgedorfwyropfx Al Seh

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 250 h, load capacity: 227 kg, mast type: other, lifting height: 5,800 mm, overall weight: 1,312 kg, next inspection (TÜV): 06/2027, fuel type: electric, We are offering this used Skyjack SJIII-3219 scissor lift, manufactured in 2011. Model number: SJIII-3219 Serial number: 22023360 Year of manufacture: 2011 Voltage: 24 V Machine weight: 1312 kg Platform height: 5.8 m Driving height: 5.8 m Load capacity (in calm wind): 227 kg Max. number of people inside: 2 people Load capacity (outside): 227 kg Max. number of people outside: 1 person System pressure: 207 bar Lifting pressure: 165 bar Wheel load: 570 kg Maximum wind speed: 9.4 m/s Maximum wind speed in calm conditions: 0 m/s Max. manual force (lifting): 400 N Max. manual force (lowering): 200 N Max. drivable slope (inside): 3.5 ° Max. drivable slope (outside): 1.5 ° Fedpfxjzhtzbs Al Sogh If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, capacity Ø 10 - 75 mm sawing motor 11 kW hydraulic motor 3 kW Saw Feeding Servo 1,5 KW Siemens Material Feeding Motor 1,5 KW Siemens Saw speed 70-160 rpm /min saw-blade dia. Ø285 x 2,0 x 1,7 x 32 mm Fjdsymf Ifepfx Al Segh cutting range min. 1000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 2950x6800 m weight of the machine ca. 3500 kg GERD WOLFF GLS-75 High-performance circular saw From 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering.

Condition: new, capacity Ø 140 - 250 mm sawing motor 30 kW hydraulic motor 5,5 kW Saw Feeding Servo 3 KW Siemens Material Feeding Motor 3 KW Siemens Saw speed 30-80 rpm /min saw-blade dia. Ø750 x 3,8 x 3,2 x 80 mm cutting range min. 1000 mm cutting range max. 7000 mm Fgsdpoymf Swjfx Al Seh control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 3500 x 8000 mm Saw speed 30-80 rpm / U pro min weight of the machine ca. 9000 kg GERD WOLFF GLS-250 High-performance circular Saw From 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.

Year of construction: 2020, condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan Fgsdjylhwgspfx Al Ssh -Manufacturer: Dunli, axial fan -Type: YMF.A4T-630S-7FIIIS01 -Power: 1.4 kW at 1400 rpm -Voltage: 380 volts -Fan wheel: Ø 630 mm / see photos Quantity: 1 piece available -Dimensions: 805/805/H265 mm -Weight: 36 kg

Condition: used, mileage: 689,000 km, power: 338 kW (459.55 HP), first registration: 08/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Volvo FM450 4x2 semi-trailer tractor, ADR EXII/EXIII, Euro 6C, I-Shift transmission, ACC adaptive cruise control, Lane Guard, collision warning system, Globetrotter cab with 2 sleeping berths, auxiliary drive, PTO, leaf spring/air suspension, Alcoa aluminum rims, air conditioning, auxiliary heater, auxiliary air conditioning, heated seats, radio/AUX, CB radio, ECE approval ADR FL/AT/EXII/EXIII Fgodpfxozh T I Uj Al Ssh Unladen weight 7081 kg Salzhausen

Condition: used, mileage: 636,000 km, power: 331 kW (450.03 HP), first registration: 01/2020, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Scania R450 4x2 semi-trailer tractor for hazardous goods transport * Euro 6d * OptiCruise transmission * Retarder * Power take-off (PTO) Fgodpszyd Txsfx Al Sjh * Leaf spring suspension with air suspension * Long-haul cab with 2 sleeping berths * ACC adaptive cruise control * Lane keeping assist * Emergency braking assist * Differential lock * Alcoa aluminum wheels * 2 tanks, 1000 liters (500/500) * Auxiliary air conditioning * Automatic climate control * Auxiliary heater * Heated seats * Refrigerator compartment * Xenon headlights * Multimedia infotainment navigation system * EFH (Extended Factory Hours) * 1st owner * ADR EXII EXIII FL AT MOT valid until 02/27 - Inspection valid until 08/27 ADR valid until 02/27

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 380 V, cutting height (max.): 110 mm, cutting width (max.): 920 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 3,000 rpm, total length: 1,080 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 150 kg, Equipment: documentation/manual, saw blade guard, For sale is a DEWALT radial arm saw 1600S in very good condition (almost new) with accessories and 3 new, unused saw table shims. The saw is being sold privately and has never been used professionally, which explains its excellent condition. It is specifically designed for stationary use. Thanks to the powerful 4 hp motor, materials up to 110 mm thick can be processed with saw blades up to 350 mm in diameter. The motor runs with the highest precision on 8 large special ball bearings in the prismatically ground running surfaces of the arm. The arm, column, and frame have additional reinforcements. The DEWALT 1600S is also suitable for use with pneumatic feed in series production. With a cutting width of 610 mm, the DEWALT 1600S is the ideal machine for processing series parts in interior design, shop fitting, trade fair construction, furniture manufacturing, and the industrial production of wooden components. The saw has a sturdy metal base, three new, unused work tables, a new universal saw blade, and various accessories. The original operating manual is included. Max. cutting length (90° crosscut): 610 mm Standard cutting depth: 110 mm Fodpezyymbjfx Al Ssgh Max. cutting depth (45° miter cut): 60 mm Max. cutting width (rip cut): 920 mm The saw must be picked up.

Condition: used, Year of construction: 2018, load capacity: 408 kg, empty load weight: 1,594 kg, Skyjack SJ-III3220. Year of manufacture: 2018. Meter reading: 232 hours. Working height: 8.1 meters. 24-volt batteries with a 230-volt charger. Video, photos, and further information also available via WhatsApp! Fodpfxszz Hzho Al Segh Price net + 21% VAT or net for export with VAT number. We speak Dutch. Wir sprechen Deutsch. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: used, Year of construction: 2015, empty load weight: 2,170 kg, Weight: 2170 kg. Lifting capacity: 454 kg. Dimensions: 2,30 x 1,20 meter. Fgjdpfxsxf Uu Dj Al Sjh Platform is exentable by 90 cm. Electric. Price: € 4.750,- ex VAT

Condition: used, Year of construction: 2016, empty load weight: 2,170 kg, Weight: 2170 kg Lifting capacity: 454 kg Dimensions: 2.30 x 1.20 meters Platform is 90 cm extenable Fgsdpsy T I R Dofx Al Soh Electric Price each: € 4,750 ex VAT

Condition: like new (used), functionality: fully functional, Year of construction: 2020, lifting height: 9,700 mm, platform length: 2,300 mm, empty load weight: 2,300 kg, For sale in like a new condition SKYJACK SJ III 4632 scissor lift (operating hours: 35h) personnel lift, work platform with extendable platform. Manufacturer: Skyjack Year of manufacture: 2020 Load capacity: 317kg Working height: 11.7 m Raised platform height: 9.7m Fedpfxeyw Rcqe Al Ssgh Overall width: 1.9 m Overall length: 2.3 m Gross weight: 2300 kg Non-marking tires Operating hours: 35h Built-in battery charger

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding length: 500 mm, grinding wheel diameter: 455 mm, grinding diameter: 300 mm, workpiece weight between centers: 150,000 g, type of input current: three-phase, workpiece diameter between centers: 500 mm, grinding wheel width: 75 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 7,500 W, overall weight: 4,600 kg, Demonstration CNC cylindrical grinding machine with automation setup Brand OKAMOTO Model OGM-350 P NCIII Year of manufacture 2020 Control: Fanuc Oi Model D Operating hours: approx. 200 hours Technical specifications Maximum swing diameter: 320 mm Maximum distance between centers: 500 mm Maximum workpiece diameter to be ground: 300 mm Maximum workpiece weight between centers: 150 kg Maximum workpiece weight: flange + chuck + workpiece: 40 kg Grinding wheel: Diameter x width x bore: 455 x 75 x 127 mm Wheel speed: Continuously variable Circumferential speed: 45 m/sec Grinding headstock (x-axis) Maximum travel: 300 Swivel angle: Non-swivel Workpiece table (z-axis) Travel: 870 mm Swivel angle: 0 – 10° Workhead Fixed/Live Center Design MK 4 Taper Chuck Spindle Bore Diameter 20 mm Spindle Speed ​​10 – 500 rpm Swivel Angle: Non-Swivel Tailstock Tailstock Type: Manual Fine Taper Adjustment Quill Travel 30 mm MK 4 Taper Chuck Drive Power Grinding Wheel Drive 5.5 kW Total Power 20 kVA Dimensions/Weight Fjdpfx Ajzn U S Isl Ssgh Length x Width x Height approx. 3400 x 2330 x 1950 mm Machine Weight approx. 4,600 kg Standard Equipment: 2 Carbide Centers Full FANUC Keyboard with Radius Compensation for Creating ISO Programs Workshop Programming: Graphic Software for Grinding and Dressing Cycles with Teach-in Function GAP Eliminator Shoulder Positioning Constant Table coolant flush 3 color LED lamp Documentation Leveling screws and support plates Operating tool set Accessories Automation preparation Automatic door Automation interface Grinding wheel guard fully open when door is open Miscellaneous Signal lamp Tailstock with electric quill retraction 1 flange 1 grinding wheel Options upon request: Paper belt filter on request Clamping devices on request Commissioning and training on request (Commissioning by Okamoto is required for warranty purposes) Transport on request

Condition: excellent (used), Year of construction: 1986, Scheer circular cutting system Stable base frame Portal design allows workpiece to pass through Fully automatic control with skip function Height-adjustable drilling unit Cutting diameter: Min: 70 mm Max: 305 mm Depth: Max. 40 mm Up to 2 panels per cut Central bore: 7–10 mm Fsdpfx Aleyy St Ae Sjgh Possible center bore: 15–35 mm Drill motor BM 602 Machine cycle times: Beech: diameter 220 mm, depth 40 mm – 40 sec Plywood: diameter 220 mm, depth 40 mm – 20 sec Chipboard: diameter 350 mm, with bore D: 35 mm – 30 sec Location: ex stock 54634 Bitburg - immediately available -

Condition: used, ELGA PURELAB Option Storage reservoir docking vessel Elga DV 35 Fedpfx Aoxzh Ehel Segh The ELGA PURELAB DV 35 Storage Reservoir Docking Vessel is designed for the secure storage and controlled distribution of purified laboratory water. Engineered to integrate seamlessly with ELGA PURELAB water purification systems, it ensures consistent water quality while maintaining system efficiency and reliability. With a 35-litre capacity, the DV 35 provides dependable storage for laboratories requiring a steady supply of purified water for analytical, research, and general laboratory applications. Its robust construction helps protect water integrity, while the docking design allows straightforward installation and maintenance. Ideal for research facilities, quality control labs, and industrial environments, the PURELAB DV 35 enhances workflow by ensuring purified water is readily available when and where it’s needed Recirculation of purified water through our wrap-around reservoir – to maintain consistent peak water purity Optional ELGA Biofilter - when fitted to the Option-Q produces water which is free from biologically active impurities. This makes it suitable for use with applications which require endotoxin free ultrapure water, bacteria-free water, and nuclease-free ultrapure water Type III / RO water available from the reservoir Front-entry service doors for easy and quick access to consumables Data collection capabilities through RS232 interface – for compliance with GLP guidelines Perfect single system solution for analytical and life science applications Delivers up to 15 liters an hour of type I water Up to 18.2 M?-cm, type I water suitable for critical applications Easy to maintain Produces type I water directly from tap water