Used Residual Wood Shredder for sale (7,568)

Condition: used, Year of construction: 2022, operating hours: 420 h, functionality: fully functional, Forestry shredder MORBARK WH3000XP is offered for sale, manufactured in 2022, in good condition with approximately 420 total operating hours. The machine is located in Valencia (Spain) and belongs to the forestry equipment category, making it ideal for shredding wood, plant residues, biomass, and other demanding forestry materials. Lsdpfx Aey Iwcfec Ashh The MORBARK WH3000XP is renowned for its high power, industrial reliability, and operational efficiency, specifically designed to withstand intensive loads in professional environments. Its hammer system ensures uniform, high-quality shredding, adapting to continuous operation with minimal maintenance required.

Condition: used, Year of construction: 2022, operating hours: 26 h, functionality: fully functional, machine/vehicle number: 193-1036, MORBARK WH2400XP wood chipper from 2022 in good condition. Serial number 193-1036. Lhedpfx Acey Iwb Uj Aeh

Condition: good (used), Year of construction: 2007, operating hours: 340 h, functionality: fully functional, power: 18.5 kW (25.15 HP), Motor 18.5 kW Rotor diameter approx. 248 mm Rotor speed approx. 98 rpm Lhjdjy Div Aepfx Ac Ash Motor 18.5 kW Rotor diameter approx. 248 mm Rotor speed approx. 98 rpm Feed opening approx. 624 x 792 mm Weight approx. 1300 kg L x W x H approx. 1750 x 1230 x 1680 mm with hydraulic push floor approx. 750 operating hours The data was taken from a brochure, therefore without guarantee further technical details on request

Condition: new, Year of construction: 2023, functionality: unexamined, overall weight: 0 kg, Müteck wood shredder MRZ1530 with 55 kW motor. Ledpfjyt Rrijx Ac Aohh Brand new, unused Only the shredder is for sale.

Condition: good (used), Year of construction: 1996, operating hours: 1,000 h, functionality: fully functional, fuel type: diesel, bar diameter (max.): 600 mm, product height (max.): 150 mm, product length (max.): 10 mm, product width (max.): 150 mm, TECHNICAL DETAILS Machine type: Mobile auger chipper Drive: Diesel engine Engine: 8 cylinder Scania Chassis: Tracked chassis Maximum trunk diameter: 60 cm Wood chip size: approx. 15 x 15 x 1 cm MACHINE DETAILS Length: approx. 9,000 mm Width: approx. 2,800 mm Height: approx. 3,600 mm Weight: approx. 16 t Operating hours: approx. 1,000 h Lhjdpfsvgb Hyex Ac Aeh Tank capacities Diesel tank: approx. 500 l Hydraulic tank: approx. 1,500 l

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: electric, Slow-speed shredder, rotor width: 800 mm, equipped with knives reversible 8 times. Motor power: 18.5 kW. Lhedpfxowy Nk Ej Ac Ajh

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,400 h, functionality: fully functional, Wood chipper DH600-18.5KW, rotor width 600mm, rotor diameter 222mm, 28 blades, concave, 4 brush cutters, hydraulic pusher, built in 2020, completely factory overhauled Lhodpsv Iq Ebsfx Ac Aeh

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GHZ 600 Lhsdeymb Ubjpfx Ac Ajh Factory overhauled, V-rotor Feed width: 300 mm Maximum feed height: 70 mm Working width of rotor: 300 mm Rotor diameter: 252 mm Rotor speed: 600 rpm Cutting system: 14 knives, 40 x 40 mm Screen perforation: 25 mm Control cabinet: fully wired, incl. 5 m cable Motor output: 18.5 kW Electrical connection: 400 V +/- 5% / 50 Hz Extraction port Ø: 200 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: • PLC electrical control (Moeller / Siemens); star-delta starting • Load-dependent material feed via top-mounted feed roller • Machine frame on anti-vibration rubber mounts • Patented V-rotor with milled knife pockets in the profile • Welded knife carriers and bolted knives with recessed knife screws • Machine prepped for on-site extraction system (extraction port Ø 200 mm)

Condition: new, Technical specification: Funnel opening: 600x800mm Funnel capacity: 0.6m³ Rotor working width: 600mm Rotor diameter: 252mm Drive power: 15kW Rotor speed: 90 rpm. Number of knives: 14 pieces + 2 pieces Type and size of knives: concave / 40x40 mm, Cutting crowns concave / 30x30mm, clearing knife Screen perforation: 15/20mm Paint: HoKu Tech Standard RAL5010/7016 Connection value: 400V +/- 5% / 50Hz Lhsdpfx Acjvyp Avs Aeh Includes: Control cabinet with 5 m cable Electrical control (PLC Siemens) Star-delta start-up Rubber vibration elements E-rotor with knife pockets milled into the profile Gear limit switch 1st row of knives Holder on the slide for long and large parts Large 40x40mm knives for optimal material feed Very robust gearbox Special clearing knife to prevent jamming at the side

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), Feed opening: 600 x 800 mm Hopper capacity: 0.6 m3 Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 blades, 30 x 30 mm Screen perforation: 15/20 mm or as required Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection rating: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Ledpfx Ajxru Hyoc Aehh Including: - Automatic star-delta start - Automatic shut-off in idle mode - Vibration-damping machine feet - CE-compliant - GS mark “dust-tested”

Condition: like new (used), Year of construction: 2012, power: 18.5 kW (25.15 HP), Rotor 260 mm Feed opening approx. 630 x 830 mm Rotor length approx. 630 mm Motor: 18.5 kW Lsdpfeyfw D Njx Ac Ashh Number of knives: 30 Screen present Overhaul: - new motor incl. installation - new slide guide rails - calibration of the slider - new knives - new counter knives - completely new rotor - hydraulics checked / wear parts replaced - new flange bearing UCF 214 - new paintwork - adjustment / test run

Condition: used, Untha LR700 shredder 18.5 kW motor, rotor length: 700 mm, 21 knives on the rotor, hydraulic drawer, 15 mm screen, autoreverse, Ljdpfsyt Htpex Ac Ajhh Knives in good condition.

Condition: like new (used), Year of construction: 2025, Rotor diameter: 260 mm - Feed opening approx. 830 x 1100 mm - Rotor length: 830 mm - Motor: 18.5 kW - Hydraulic pusher Ledpfxeyat H Ao Ac Aehh - Single knife row - Chip screen - Low operating hours

Condition: good (used), Year of construction: 2020, Rotor 260 mm Feed opening approx. 800 x 1200 mm Rotor length approx. 800 mm Lhodpjwzaizsfx Ac Ash Motor 18.5 kW Technical data upon request Required space approx. 2050 x 1550 mm All information without guarantee

Condition: like new (used), - made in Germany - new knives and counter-knives TECHNICAL PARAMETERS: Lsdpfeqy Ek Hsx Ac Aohh - feeding dimension 520x1000 mm - motor power 80 kW - four rows of knives - counter knife - sieve 20 x 20 mm - sieve dimension 1000 x 900 mm - rotor diameter 600 mm - rotation of shaft 830 rpm Overall dimensions of the machine 235x170x290 cm weight ~ 4000 kg

Condition: used, Year of construction: 1999, functionality: fully functional, fuel type: electric, - German-made - Year of manufacture: 1999 TECHNICAL SPECIFICATIONS: - feed opening: 600 x 800 mm - rotor diameter: 175 mm - rotor length: 600 mm - total power: 18.5 kW - number of knives: 14 pcs - reversible cutting knives: 30 mm x 30 mm - screen: Ø 15 and 12 mm - AUTOREVERSE Lhjdpfew H Rn Eox Ac Aeh - HYDRAULIC RAM - pressing ram height: 180 mm - rotor speed: 80–120 rpm - extraction nozzle diameter: Ø 200 mm - dimensions (L/W/H): 200 x 120 x 160 cm - weight: 1200 kg

Condition: ready for operation (used), Year of construction: 1995, Heavy-duty rotor hog crusher. Lhodex Sdw Ropfx Ac Aoh Materials that are processed include everything from wood wastes to eucalyptus bark The machine is equipped with 250 kW electrical motor. Production, particle size P100 mm , m³, loose vol/h : 135 ( max 170 ) Production, particle size P100 mm , t/h , fresh : 33 ( max 40 ) Infeed opening : 1514 x 695 mm

Condition: like new (used), engine power 18.5 kW hydraulic pressing drawer Lhodpfxjyzm H Ts Ac Aoh feed hopper height 90 cm + additional 200 cm operating pressure 180 bar control panel operation CE marking year of manufacture 2002

Condition: new, Year of construction: 2026, Engine power 18,5 kW Lsdpfxenzh T Tj Ac Ajhh rotor diameter 248mm Number of cutting edges 17 pieces indexable inserts Feed opening 624 x 792mm Suction nozzle 160mm left or right suction possible weight approx. 1300 kg Perforated screen 15/20mm Outer dimensions approx. 1740 x 1220 x 1670mm LxWxH

Condition: excellent (used), Gross Gaz 102 shredder/chipper 22 kW motor, rotor length 1020 mm, 50 knives on the rotor, hydraulic drawer, Lodpeylav Ujfx Ac Ashh 15 mm screen, autoreverse, loading hopper inlet 1020 x 1500 mm The machine is in very good condition and fully performs its functions.

Condition: ready for operation (used), Drum crusher Bruks 820CL, vibrating conveyor Bruks M-450 chipper with rotor diameter 800 mm infeed opening 560 x 365 mm Lhodpfx Ajxn T Tdoc Aoh 2 knives chip length 23 - 27 mm productivity about 30 - 50 m3 chips/h power 55 kW length 30 m weight ca. 4.500 kg

Condition: reconditioned (used), Wood Chipper Bruks 1502M Lhsdpfjxndnxox Ac Ajh Capacity: 50–100 m³/h Electric Motor: 110 kW Majorly refurbished, New blades/counter blade New drive belt

Condition: like new (used), engine power 18.5 kW feed hopper press drawer 2 cm screen Lhedpfxsyw Hxzj Ac Aoh year 2011 380 V

Condition: like new (used), Year of construction: 2022, operating hours: 1,500 h, functionality: fully functional, Votecs hacker, as good as new, for sale at a reasonable price. Lodpjvv H Afsfx Ac Aehh Main engine power 45 KW. Similar to Weima or Rainbold

Condition: excellent (used), Year of construction: 2022, operating hours: 250 h, functionality: fully functional, NSL 130-45B chipper for sale in Poland Zerspaner NSL 130-45B 45 kW Rotor Ø 352 mm Die Einwellen-Zerspaner der NSL-Baureihe zeichnen sich durch eine äußerst robuste Technik aus. Für Holzabfälle in Schreinereien und der holzverarbeitenden Industrie haben sich Zerspaner mit Einwellentechnik am Markt durchgesetzt. Die Zuverlässigkeit und die solide Technologie machen unsere Maschinen zu einer hervorragenden Wahl sowohl für die Industrie als auch für den Handwerker. Der Schneidrotor mit seinen dreh- und auswechselbaren Schneidwerkzeugen liefert eine hohe Zerkleinerungsleistung bei gleichzeitig wirtschaftlichem Energieeinsatz. Bei unseren Zerspanern wird durch eine lastabhängige Schiebersteuerung eine continuierliche Zerspanung ohne Blockaden ermöglicht. Der NESTRO-Zerspaner wird kosmet mit Schaltschrank und 5 m Kabel geliefert, der Schaltschrank ist für eine Wandmontage vorgesehen. Technische Daten: • Spannung / Frequenz: 3-phasig, 400 V / 50 Hz ±5 % • Antrieb / Leistung: 45.0 kW • Abmessung (L x B x H): 2,120 x 1,995 x 1,720 mm • Trichteröffnung: 1,300 x 1,200 mm • Trichtervolume: 1.9 m³ • Rotor Ø / Länge: 352 / 1,320 mm • Rotor-Drehzahl: 80 – 100 U/min • Durchsatzleistung: 1 – 4 faches Trichtervolumen pro Stunde (abhängig von Material u. Sieblochung) Lhsdpfxswbpcqe Ac Aeh • Anzahl der Schneidmesser: 99 (30x30mm) • Absaugstutzen: Ø 250 mm • Gewicht: 3,800 kg