Used Retrofit for sale (1,318)

Condition: used, Year of construction: 1986, Overview  This isobaric glass bottle filler was manufactured in 1986–87 by German company Krones and commissioned in 1988. It is a Krones Mecafill VK2V K126-308 with 96 filling valves and 18 capper heads for crown cork closures. The filler has been continuously upgraded with new technology, including a Siemens S7-300 control system (2009) and a retrofitted Krones capper (2004). It is suitable for beer, cider, soft drinks, cocktails, lemonade, carbonated and still water. The machine is still in production (can be seen on the video) and will be dismantled by the end of September 2025. Spare parts from the warehouse are included. Technical data  Capacity: 30,000 bph (all formats) Formats: 0.275 L, 0.33 L, 0.5 L (total 9 formats) Filling valves: 96 Capping heads: 18 Closure type: Crown cork Direction: Clockwise (L–R) Diameter: 2,880 mm Filling system: Isobaric, with double evacuation, HDE (hot water injection), and splinter washout Products: Beer, alcohol-free beer, cider, cocktails, lemonade, soft drinks, carbonated water, still water Control system: Siemens S7-300 PLC (2009 retrofit) Scope of Delivery  Filler and capper | Krones | Mecafill VK2V K126-308 | 1986–87 (commissioned 1988) | 96 filling valves, 18 capper heads, crown cork closures, clockwise, diameter 2,880 mm, crown cork transport system Control system | Siemens | S7-300 | 2009 | PLC retrofit Safety fences Spare parts   Nwodpfx Aexc H Tmjfheb

Condition: used, Year of construction: 2003, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003      Preforms feeder      Preforms tipper      Transporters | AVE | 2004      Injection and blowing | Nissei ASB | PF4-1BH |2000      Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004      Lot Coder | Marken | Smartlase 110i | 2009      Rinser - Filler - Capper | GyM | Tribloc 9-12-3| 2012      Labeller|Auxiemba | Basic 720-6-HM-iz  | 2010 | 7000 bph Shrink Packer | SMI | ST-2000 | 2009 | 30 packs / min Handle applicator | SMI HA 25Sx | 2012 | 25 packs /min Palletizer | Lapeyra | RP1C | 1992 (retrofit as CE RD1215) Wrapping|Impropak | Girospak 747 SBP | 1990 (retrofit as CE RD1215) Transporters | AVE | 2000      Nwjdpfx Astuyq Aofhjb

Condition: used, Year of construction: 1986, Overview  This isobaric glass bottle filler was manufactured in 1986–87 by German company Krones and commissioned in 1988. It is a Krones Mecafill VK2V K126-308 with 96 filling valves and 18 capper heads for crown cork closures. The filler has been continuously upgraded with new technology, including a Siemens S7-300 control system (2009) and a retrofitted Krones capper (2004). It is suitable for beer, cider, soft drinks, cocktails, lemonade, carbonated and still water. The machine is still in production (can be seen on the video) and will be dismantled by the end of September 2025. Spare parts from the warehouse are included. Technical data  Capacity: 30,000 bph (all formats) Formats: 0.275 L, 0.33 L, 0.5 L (total 9 formats) Filling valves: 96 Capping heads: 18 Closure type: Crown cork Direction: Clockwise (L–R) Diameter: 2,880 mm Filling system: Isobaric, with double evacuation, HDE (hot water injection), and splinter washout Products: Beer, alcohol-free beer, cider, cocktails, lemonade, soft drinks, carbonated water, still water Control system: Siemens S7-300 PLC (2009 retrofit) Scope of Delivery  Filler and capper | Krones | Mecafill VK2V K126-308 | 1986–87 (commissioned 1988) | 96 filling valves, 18 capper heads, crown cork closures, clockwise, diameter 2,880 mm, crown cork transport system Control system | Siemens | S7-300 | 2009 | PLC retrofit Safety fences Spare parts   Nsdpjxc H Tgjfx Afhewb

Condition: used, Year of construction: 2000, Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data Capacity: 7,600 bph on 1.0 L Formats: Neck finish 29/21 Preforms processed: RPET Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Sidel caterpillar oven 6 heating modules Sidel preforms tipper Sidel preforms hopper & feeder Sidel preforms infeed rail Sidel caterpillar oven & blowing wheel Solenoid valves Sidel Universal type Sidel PCC version V2.02 Sidel CE electrical cabinet (Siemens) Service history: Sidel maintenance completed September 2024 Elongation sensor retrofitted Additional service by client’s technicians Scope of Delivery  Stretch blow-moulder SIDEL SBO 6 Series 2 Preforms tipper Preforms hopper & feeder Preforms infeed rail Caterpillar oven & blowing wheel Nwsdeyb Tbpspfx Afhjb

Condition: used, Year of construction: 2000, Overview  This Auxiemba Gacela RSA 9-III-IZ is a self-adhesive labeling machine manufactured in 2000. It was used for labeling cava (champagne) bottles with a capacity of 6,000 bottles per hour and can be adapted for wine bottles (8,000-10,000 bottles per hour). The machine has already been dismantled and stored. All technical documentation is available. Technical details  Capacity: 6,000 bottles per hour for cava 8,000-10,000 bottles per hour for wine Labeling stations: 3 heads (front, back, neck label) Possibility of retrofitting a fourth head Label infeed: 3 double roll unwinding stations with splicing function Electrical specifications: Voltage: 3 x 380V Frequency: 50 Hz Power: 20 KVA Nwsdpfov Aafmex Afheb

Condition: used, Year of construction: 2011, Overview  This Heuft Glas InLine reflexx IR is an inspection machine for empty bottles, designed for quality control in filling lines. The machine has a maximum output of 46,000 bottles per hour and was originally delivered in December 2011. It is in very good condition and ready for use at short notice. The flow direction is from left to right and it is equipped with a Secomak blower instead of a compressed air blow-off system. Technical details  Output: Maximum 46,000 bottles/hour Flow direction: Left to right Equipment: Two triggers Secomak blower Transponder recognition for RFID test bottles Rejection monitoring Heuft HLAN network (can be retrofitted as an option) Two-way rejection Delta K to the right Four type licenses Delta K tripods for belt height of 1130 mm Two fluids for lye detection Missing components Infeed control (must be added if required) Thread blow-off (must be added if required) Documentation (not available, can be replaced) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal if bottles are too high, too wide or lying down Inspection of the bottle base Inspection of the mouth sealing surface Inspection of the thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) Detection of residual liquids (e.g. oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Monitoring of the rejection process Nedpfx Aju N Snkofhswb

Condition: used, Year of construction: 1996, Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water Lye concentration measurement and dosing control, also for post-caustic pH value measurement for hot water 1 Soaking & rinsing system: Double pre-soak with sieve belt Lye volume: 30 m³ Caustic solution, hot water 1, hot water 2, cold water and fresh water Head section can be steamed and rinsed with disinfection H₂ suction Nsdpfx Ajvxtavsfhswb

Condition: used, Year of construction: 2017, Overview This CraftCan35 can filling machine was manufactured in 2017 by the British company Vigo UK (ABE). The machine has been overhauled, is currently cleaned, dismantled and safely stored and is available for immediate use. It is particularly suitable for small to medium-sized breweries that want to process 330 ml and 440 ml standard cans (202 ends). A viewing can be organized by arrangement. Technical details  Output: up to approx. 35 cans per minute (depending on product) Formats: 330 ml & 440 ml standard cans (202) Filling system: 6-head filler Closure: double seam seamer for 202 ends Voltage / power supply: not specified Special features: Retrofitted rinser and dryer (Vigo UK) Pneumatics converted to metric connections Original operating instructions available Scope of delivery  1 × Can filling line | ABE | CraftCan35 | 2017 Incl. rinser and dryer (retrofitted) Optional: Stainless steel rotary table (pack-out table) and 3 m single-track conveyor belt Some acrylic protective cladding (some replacement required) Nsdpfx Aswzb Irofhjwb

Condition: used, mileage: 149,999 km, power: 80 kW (108.77 HP), first registration: 04/2007, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,500 mm, loading space length: 2,800 mm, Equipment: ABS, air conditioning, central locking, Chat now via WhatsApp: Contact our sales consultant quickly & easily. Attention!!! Preferential sale to business customers. Internal ID Number: [ 3093 ] ---- Optional add-ons: * 12–64 month warranty (valid EU-wide) * New inspection * New MOT & emissions test * Nationwide delivery * Financing available with or without down payment * Towbar retrofit available upon request! ---- Vehicle highlights: * Euro 5 standard * German vehicle * Full service history * 2nd owner * Immediately ready for operation * Special equipment: Automatic climate control, cruise control, cargo area with wood panelling, external temperature display, 180A alternator, wood floor in cargo area, fuel filter with water separator, bulkhead with window, metallic paint, Parktronic System (PTS), spare wheel on matching tires, spare wheel holder under rear frame incl. jack, rear mudflaps, passenger double seat in cab, rear door step. Further equipment: third brake light, driver’s airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicators, 74 Ah battery, brake assist, headliner in cab, lockable glove compartment, rear door (opening angle 180°), body type: standard panel van, child safety locks, main fuel tank: 75 litres, lashing rings / load securing points, headlight range adjustment, engine 2.1 l – 80 kW CDI CAT, wheelbase 3,250 mm, low emissions according to Euro 4 Gr. III, sliding door (right side to load/passenger compartment), front stabilizer, steel wheels 6.5x16, maintenance interval indicator Assyst, heat-insulating glass, gross vehicle weight 3.50 t ---- Interested in leasing or financing? We offer attractive terms – also possible without a down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Nodpfx Aeydhhvjfhowb Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ---- Note: All information provided online is non-binding and serves only as a general vehicle description. Errors, misprints and prior sale reserved. The binding condition of the vehicle is determined solely by the purchase contract on site or by written confirmation. Vehicles with mileage over 50,000 km or older than 3 years are primarily sold to our commercial customers.

Condition: like new (used), functionality: fully functional, Year of construction: 1997, Hydraulic press brake LVD PPEB-EQ 80/25 S630 with retrofit 2023 Year of construction 1997 Serial number 24589 Technical specifications Force 800kN Working length 2500mm Distance between uprights 2050mm Stroke 200mm Distance table – ram 400mm Gap 400mm Width table 150mm Approach speed 130mm/s Working speed 11mm/s Return speed 115mm/s weight 6200 kg motor 7,5 kW NEW 2023 CNC COMMAND CONTROL S-630 4 axes Y1 - Y2 X - R Touch screen 10” Nwodpoyag Umsfx Afhjb 2D-Graphic simulation of bending Automatic sequence bending Automatic development Database for tooling and workpieces ...  2 front supports included  .

Condition: used, For Sale: Henneken HP 415 Meat Flattener – Ready to Go Professional food-industry meat flattener, ideal for processing poultry, pork, beef and other proteins. Machine is in excellent working condition and immediately deployable in your production line. Key Features - Manufacturer: Henneken GmbH - Model: HP 415 - Type: Industrial meat flattener / thickness former - Belt Width: 415 mm (wide conveyor for high throughput) - Infeed: Conical / guided belts for optimal product feeding - Construction: Stainless-steel food-grade sanitary design – easy to clean and meets hygiene standards - Condition: Used but fully functional and ready for immediate use - Control Cabinet: Newly updated electrical control panel - Robust German engineering designed for continuous industrial usage Performance & Benefits Nwedjyddh Ejpfx Afhob ✔ Achieve uniform meat thickness for consistent portioning and cooking ✔ Significantly increase production efficiency ✔ Compact footprint suitable for integration into processing lines ✔ Easy operation and maintenance ✔ Ideal for further processes such as breading, packing and cooking Typical Applications ✔ Poultry fillets ✔ Pork products ✔ Beef cuts ✔ Other proteins requiring flattening before further processing Selling Points - Immediately operational – no retrofitting required - Quality machine from a trusted European manufacturer - Excellent choice for upgrading or expanding processing capacity

Condition: used, tank capacity: 900 l, GENERAL INFORMATION Equipment: Disc valve Design: upright Remarks: Height-adjustable knuckle screws on the feet are partially missing (must be retrofitted on site for installation; otherwise, the outlet would be lower than the feet); Inner tank surfaces partially show metallic discoloration; 2 tanks have a dent at the junction of the cylinder and top head (see photos). Inner diameter: 890 mm Total height: 2,100 mm Location: Bremen Volume: 900 liters Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 1,460 mm Last intended use: Brewery TANK Support type: Height-adjustable feet Number of feet: 3 units EQUIPMENT Outlet: 35 mm Nodpoyckxuefx Afhewb MATERIAL PROPERTIES Material of feet: Stainless steel

Condition: used, Year of construction: 2000, machine/vehicle number: A 00 12 006 / 0100, with new ASCOM gunl control, PLC, light curtain, and touch panel, mounted at the inlet of the automatic sprayer. - Manufacturer: Venjakob - Type: VEN SPRAY Duo - Retrofit 2026 (year of manufacture: 2000) - Working width: 1300 mm - Right-hand operation - Price for reconditioned machine - Current condition, in the reconditioning phase - Duo pistol drive - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm Nwodpfex Ihvpex Afhob - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The photos show only one example of a refurbished automatic sprayer. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2002, machine/vehicle number: A0207001, -with belt cleaning at the machine outlet under a folding table with belt conveyor. In 2021, the PLC control, the touch screen control, and the frequency converter for the spraying-gun drive were replaced. - Manufacturer: Venjakob - Type: HGS-Duo/C - Retrofit 2026 (year of manufacture 2002) - Working width 1,300 mm - Operating side right - Price for refurbished machine - Current condition, in the refurbishment phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% Nsdpex Ihvvsfx Afhswb The pictures are examples of an unrefurbished spray machine of the same type. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2000, machine/vehicle number: U03 04 005/0100, In 2019, the PLC control system, the touch screen control, and the frequency converter for the gun drive were replaced. - Manufacturer: Venjakob - Type: VEN SPRAY HGS-DUO-Z - Retrofit 2026 (base machine built in 2000) - Working width: 1300 mm - Spray booth width length 2,400 mm instead of 2,166 mm - Right-hand operating side - With dust extraction at the machine inlet - Price for reconditioned machine - Current condition, in the reconditioning phase - Gun drive in duo design - Dry extraction Nwodpfx Afsx Ihviohob - Exhaust air capacity 7,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed 3-10 m/min - With belt cleaning system - With paint recovery via V-belt system - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Total connection ~ 15kW - Length: 6,300mm - Width: 3,550mm - Height: 2,540mm - Volts, Hz 400 / 50 - Color RAL 7035 light gray/black - Location, in stock - Voltage fluctuations max. +/- 5% The image shows only one example of a refurbished automatic sprayer. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, mileage: 330,000 km, power: 120 kW (163.15 HP), first registration: 06/2009, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,000 mm, total width: 2,050 mm, loading space length: 3,300 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Contact our sales advisor quickly and easily. Attention! Sales preferably to commercial customers. Internal ID number: [401609] ----Optional add-ons: * 12 to 64-month warranty (valid EU-wide) * New inspection * New TÜV & emission test * Nationwide delivery * Financing possible with or without down payment * Retrofit reversing camera on request! ----Vehicle highlights: * German vehicle * Regularly serviced * One owner * Euro 5 emission standard * Tow bar rated for 3,500 kg * Compartments and worktop in the cargo area * Automatic climate control * Auxiliary heater * Cruise control * On-board computer * Bluetooth multimedia functionality Special equipment: 13-pin trailer socket, outside temperature display, 100 Ah battery, digital tachograph, windows in rear doors, window in cargo/passenger compartment (fixed, front right), 180 A alternator, rear doors (opening angle 270 degrees), wooden floor in cargo area, partition with window in cargo area, metallic paint, cross-member with integrated entry step, full-sized spare wheel, spare wheel carrier under rear frame incl. jack, interior rearview mirror, double passenger seat in cab, reinforced rear stabilizer, reinforced front stabilizer, reinforced shock absorbers, fuel sender for auxiliary heater, plywood lining in cargo/passenger area, reinforced front axle, auxiliary heater (hot water) Additional features: Third brake light, adaptive brake light, driver's airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated turn indicators, brake assist, ABS+ASR braking system, overhead panel in cab, lockable glove compartment, body type: high-roof panel van, child lock, main fuel tank 75 liters, load securing/tie-down points, headlight range adjustment, engine 2.1L - 120 kW CDI CAT, wheelbase 3665 mm, low emissions according to Euro 5, right sliding door for cargo/passenger compartment, 6.5x16 steel wheels, ASSYST maintenance interval indicator, heat-insulating glazing, permitted gross vehicle weight 3.5 t Leasing or financing required? We offer attractive offers—even with no down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Nwedpoxx Hi Tofx Afhob Sat: 9:00 am – 2:00 pm ----Note: All information provided online is non-binding and for general vehicle description only. Errors, typos, and prior sale reserved. The binding condition of the vehicle is determined solely by the purchase contract on-site or by written confirmation. Vehicles with mileage over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, mileage: 460,000 km, power: 105 kW (142.76 HP), first registration: 05/2017, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,000 mm, loading space length: 3,300 mm, loading space width: 1,780 mm, Equipment: ABS, air conditioning, central locking, soot filter, Now chat via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention!!! Sale preferably to business customers Internal ID Number: [ 2964 ] ----Optionally available: * 12–64 months warranty (valid EU-wide) * New inspection * New TÜV & emissions test (AU) * Nationwide delivery * Financing possible with or without down payment * Retrofitting of a reversing camera available on request! ----Vehicle highlights: * 19% VAT deductible * German vehicle * Regularly serviced * 1 previous owner * Euro 6 emission standard * 314 CDI High Roof & Long Wheelbase * Automatic climate control * Cruise control * Tow bar = 3,000 kg Special features: Passenger airbag, Audio system Audio 15 (radio with color display), outside temperature display, generator 180 A, wooden floor in load compartment, navigation system Becker MAP Pilot, smokers package, reversing camera, cab seats: double passenger seat, cab seats: comfort driver’s seat, rear stabilizer, reinforced front stabilizer, plywood lining in load/luggage compartment. Further equipment: 3rd brake light, adaptive brake light, driver’s airbag, washer fluid indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicators, 74 Ah battery, brake assist, ABS+ASR braking system, cab roof lining, lockable glove compartment, rear doors (180° opening angle), body/build: high-roof panel van standard, child safety lock, main fuel tank: 75 L, full-width bulkhead, load securing/anchor points, headlight range adjustment, facelift model, engine 2.1L – 105 kW CDI CAT, wheelbase 3,665 mm, tire repair kit with compressor, Euro 6 low emissions, sliding door right side (cargo/passenger area), seat belt system with warning device (driver’s side), seat covers/upholstery: Lima fabric, steel wheels 6.5x16, service interval indicator Assyst, heat-insulating glass, gross vehicle weight 3.50 t Leasing or financing required? We offer attractive terms — also possible with no down payment! Feel free to contact us. Contact: Telephone: E-mail: Njdpex Iblkefx Afhjwb Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 ----Note: All information on the internet is non-binding and serves for general vehicle description only. Subject to error, typographical mistakes, and prior sale. The exact condition of the vehicle is determined exclusively by the purchase contract on site or by written confirmation. Vehicles with more than 50,000 km mileage or older than 3 years are preferably sold to business customers.

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Nodpfx Afjd Rmcmjhewb Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 CNC Control: Heidenhain TNC 530 with DMG-specific MillPlus IT user interface Spindle taper: SK40 Operating hours: 54,981 h Travel distances: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: NC rotary table (Nikken) Large NC rotary table Tailstock Handwheel Inspection An inspection under power can be arranged at any time by appointment. Condition: Nedpfxoxxamxo Afhjwb Used condition consistent with age and prior usage Known defects: X-axis ball screw worn / overhaul required Y-axis suspected cable or motor damage Repairs completed: 2017 – Handwheel retrofit kit 2022 – Replacement of chip conveyor auger 2024 – New cylinder/ linear guide for tool magazine 2024 – New screen Further defects cannot be ruled out Important note / exclusion of liability The machine is explicitly sold as defective, without warranty, without guarantee and under exclusion of any liability for material defects. All technical information has been provided to the best of our knowledge but is non-binding. No liability is assumed for completeness, correctness, or up-to-dateness of the information. The sale is made as inspected and any subsequent negotiations are excluded.

Condition: new, * IMMEDIATELY AVAILABLE * Technical specifications: • Brand: Brian James • Model: Race Transporter 7 • Vehicle Type: Car transporter • Vehicle Condition: New vehicle • First Registration: None • TÜV/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 600 x 235 x 199 cm • External dimensions (LxWxH): 770 x 255 x 264 cm • Loading floor height: 58 cm • Permissible total weight: 3,500 kg • Payload: 2,069 kg • Chassis: Platform trailer (wheels underneath the body) • Tyres: 195/55R10C • Suspension: ALKO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Black body made of high-quality fiberglass-reinforced plastic. Lightweight yet extremely robust • Full-length daylight roof • Manoeuvring handles front and rear • Front access doors on both sides for easier lashing of front wheels • Rear access doors on both sides for easier lashing of rear wheels • Large double-leaf side doors, lockable, left and right in direction of travel • Electrically operated full-width and full-height tailgate • 2x foldable auxiliary aluminium ramps, 1.5m, for very low vehicles • Rollers at rear of vehicle • Interior height 199 cm - rear entry height 188 cm • Perforated lashing floor provides excellent slip resistance and is extremely wear-resistant, even under the toughest operating conditions • Numerous lashing points and a highly durable floor enable flexible securing options and optimal grip • Fully adjustable wheel chocks with quick release adjustment system. Suitable for lowered vehicles • Closed composite floor plate (honeycomb core plastic floor) consisting of a honeycomb structure with a surface laminate on both sides. Extremely lightweight and robust • 2x central floor storage boxes, integrated into the loading surface, ideal for storing heavy or bulky items. Aluminium lids included • Electric winch, 12V, with radio remote control. Includes synthetic rope and carabiner hook • Electro-hydraulic tilting loading platform, one-touch operation for optimal entry angle • Central control unit for tilt function and tailgate, in addition to radio remote. Includes battery status display • Very robust welded steel frame Nwedpfeydih Rex Afhob • Frame fully hot-dip galvanized • Spare wheel with mounted holder • Reinforced V-drawbar • ALKO overrun brake and parking brake • Reversing automatic mechanism • Cast steel coupling head with integrated high-security ALKO lock • Plastic mudguards • 13-pin connector • LED interior lighting with LED strip • Reversing lights • Large dimension full LED safety lighting • Side LED reversing lights • LED work light at the rear for better visibility during loading and unloading • Integrated rear fog light • Various marker lights front, side, and rear • Anthracite aluminium alloy wheels • Heavy-duty jockey wheel • 5 years chassis warranty • 4 wheel securing straps for lashing over the wheels Optional accessories can be retrofitted—please enquire! New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be shipped in advance, or transit plates (Germany) can be provided - Export registration plates incl. customs declaration available - Errors, omissions, and prior sale excepted -

Condition: new, *AVAILABLE IMMEDIATELY* Technical Data: • Brand: Brian James • Model: Race Transporter 7 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: None yet • Roadworthiness/Inspection (TÜV): 2 years from first registration • Internal dimensions (LxWxH): 600 x 235 x 199 cm • External dimensions (LxWxH): 770 x 255 x 264 cm • Loading floor height: 58 cm • Perm. gross weight: 3,500 kg • Payload: 2,069 kg • Chassis: High loader (wheels positioned underneath the structure) • Tyres: 195/55R10C • Suspension: ALKO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Body made from high-quality, glass fibre-reinforced plastic; lightweight yet extremely robust • Full-length daylight roof for optimal lighting inside • Manoeuvring handles front and rear • Dual front side locker doors for easy lashing of the front wheels • Dual rear side locker doors for easy lashing of the rear wheels • Large double wing side doors on left and right (direction of travel), lockable • Full-height and full-width electric rear ramp door • 2x foldable aluminium auxiliary ramps, 1.5 m, suitable for ultra-low vehicles • Rollers at the rear of the trailer • Internal height: 199 cm; rear entry height: 188 cm • Perforated lashing floor provides high slip resistance and is extremely wear-resistant, even under tough operating conditions • Numerous lashing points and a highly durable floor offer flexible securing options and excellent grip • Fully adjustable wheel stops with quick-release system, suitable for lowered vehicles • Closed composite floor panel with honeycomb-structured plastic core and surface layers on both sides: extremely light and rugged • 2x centrally recessed floor storage boxes, flush-mounted in the loading floor, ideal for storing heavy or bulky items; aluminium lids included • Electric winch, 12V with radio remote control, synthetic rope, and carabiner • Electro-hydraulic tilting of the loading platform, tiltable at the push of a button for an optimal loading angle • Central control unit for tilting function and rear ramp, in addition to remote control; includes board battery charge status display • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Spare wheel with bracket mounted • Reinforced V-drawbar, extremely robust • ALKO overrun brake and parking brake • Automatic reverse function • Steel cast coupling head with integrated ALKO high-security lock • Plastic mudguards • 13-pin plug • LED interior lighting with LED strip • Reverse light • Large fully LED safety lighting • Side LED reverse lights • LED work lights at the rear for improved visibility when loading and unloading • Integrated rear fog light • Various marker lights—front, side, and rear • Anthracite aluminium alloy wheels • Heavy duty jockey wheel • 5-year chassis warranty • 4 wheel securing straps for lashing over wheels Optional accessories available – please enquire! New vehicle with warranty and roadworthiness certificate. We would be happy to offer you suitable financing! - Financing or leasing available - Nationwide delivery possible - All prices include VAT Nwodjydiibjpfx Afhjb - Vehicle registration document pre-shipping possible or temporary number plates (Germany) can be provided - Export plates including customs declaration available - Errors, omissions, and prior sale excepted -

Condition: new, * IMMEDIATE AVAILABILITY * Latest BJT model with numerous retrofitting options available: including hydraulic tipping function, auxiliary ramps, etc. Technical Specifications: • Brand: Brian James • Model: Race Sport MY2025 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Without initial registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 550 x 210 x 199 cm • External dimensions (LxWxH): 715 x 250 x 253 cm • Loading platform height: 48 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,445 kg • Payload: 2,055 kg • Chassis: Lowloader (wheels beside the superstructure) • Tyres: 155/70R12 • Suspension: ALKO rubber spring axle • Jockey wheel: Yes • 100km/h approval: Optional, retrofittable DESCRIPTION • Black body made from high-quality, glass-fibre reinforced plastic. Lightweight yet extremely robust • Full-length daylight roof • Manoeuvring handles front and rear • Front access doors on both sides for easy lashing of the front wheels • Large, lockable side flaps on both left and right in the direction of travel • Full-height and -width rear tailgate with lockable internal rotary bar lock • Rollers integrated at the rear of the vehicle • Internal height 1,990 mm – entry height at rear 1,880 mm • Perforated steel lashing floor provides high slip resistance and is extremely wear-resistant, even under the toughest operating conditions • Numerous lashing points and a highly load-resistant floor offer flexible securing options and optimal grip Nwjdpfx Afoydiihohsb • Closed multiplex floor panel • Electric 12V winch with cable remote control. 2,250 kg pulling force, with roller fairlead, winch cable and carabiner hook. Powered by an onboard battery • Highly rigid welded steel frame • Frame fully hot-dip galvanized • Spare wheel with bracket installed • Reinforced, highly stable V-drawbar • ALKO overrun hitch and parking brake • Reverse automatic system • Steel cast coupling head with integrated ALKO high-security lock • Plastic mudguards • 13-pin connector • Reversing light • High-capacity safety lighting • Integrated rear fog light • Various marker lights front, side, and rear • Heavy-duty jockey wheel • 5-year chassis warranty Optional accessories available – please enquire! New vehicle with warranty and TÜV certificate. - Financing or leasing possible - Nationwide delivery available - All prices include VAT - Vehicle registration documents can be shipped in advance or short-term licence plates (Germany) can be provided - Export plates including customs declaration available - Subject to errors, omissions, and prior sale -

Condition: new, * IMMEDIATELY AVAILABLE * Including additional 150 cm ramps Unique clearance special price for exhibition piece! Njdpfxsydih Dj Afhewb Technical Specifications: • Brand: Brian James • Model: RT 6 • Vehicle condition: New vehicle • First registration: No first registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 550 x 235 x 199 cm • External dimensions (LxWxH): 720 x 255 x 264 cm • Loading height (floor): 58 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,511 kg • Payload: 1,989 kg • Chassis: Platform trailer (wheels under the body) • Tyres: 195/55R10C • Suspension: ALKO rubber suspension axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Black body made of high-quality, glass fiber reinforced plastic. Lightweight yet extremely robust • Full-length daylight roof • Maneuvering handles at front and rear • Front hatch doors on both sides • Rear hatch doors on both sides • Large double-wing side doors on left and right in driving direction, lockable • Full-height and full-width loading rear ramp with lockable internal rotary bar lock • 2x foldable additional ramps 1.5m for extra low vehicles • Rollers at the rear of the vehicle • Internal height 199 cm – entry height at the rear 188 cm • Side door dimensions: 116 x 143 cm (WxH) • Perforated steel lashing floor offers high anti-slip protection and is extremely wear-resistant • Numerous lashing points and a heavy-duty floor provide flexible lashing options and perfect grip • Fully adjustable wheel chocks with quick-change system. Suitable for lowered vehicles • 2x central aluminum floor storage boxes, recessed into the loading area for ideal storage • Front floor storage boxes with aluminum lids (gas spring assisted) • Electric winch, 12V with remote control. 2,250 kg pulling force • Winch remote connection available at the rear of the vehicle • Electro-hydraulic tilting function for the loading platform, can be tilted at the push of a button for optimal loading angle • Very stable welded steel frame • Frame fully hot-dip galvanized • Spare wheel with mount installed • Very sturdy reinforced V-drawbar • ALKO overrun brake and hand brake • Automatic reversing system • Coupling head made of cast steel with integrated high-security ALKO lock • Plastic mudguards • 13-pin connector • Reverse light • Full LED safety lighting • Integrated rear fog lamp • Various marker lights at the front, sides, and rear • Heavy-duty jockey wheel • 5-year chassis warranty • 4 wheel tie-down straps for securing over the wheels Pictures show optional accessories (can be retrofitted): • Aluminum rims, anthracite • LED lighting package: with 2x LED reversing lights mounted on the sides of the box body and 2x LED loading lights at the rear above the ramp and 2x LED light bars mounted inside A wide range of accessories can be retrofitted - please inquire! - Financing or leasing available - Nationwide delivery available - Vehicle registration documents can be sent in advance, or temporary registration plates (Germany) can be provided - Export plates including customs declaration available - Errors, omissions, and prior sale excepted -

Condition: used, functionality: fully functional, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and safe warehouse storage. This heavy-duty racking system is ideal for warehouses, industrial companies, and logistics operations that require robust and durable racking for storing Euro pallets. The proven PR600 design offers high load-bearing capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used here means: certified brand quality at a particularly attractive price – immediately available for new installations, retrofitting, or expanding your existing racking system. Customizable: The racking frames (Type P120) can be rebuilt to your desired height – professionally and precisely in our workshop. We provide made-to-measure racking solutions for every warehouse requirement. PRODUCT DETAILS - Height: approx. 9.85 m - Depth: approx. 105 cm - Length: approx. 10,100 cm - Shelf load: 3,000 / 3,500 kg (depending on version) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet spaces: 540 incl. floor spaces - Version: Used SSI Schäfer PR600 - Availability: Immediately available from stock, multiple sets in stock SCOPE OF DELIVERY: Njdpsydklqofx Afhewb - 037 × frames approx. 9.85 × 1.05 m, galvanized, pre-assembled - 288 × beams approx. 270 cm (INP100 or CE110) - 576 × safety pins Price: €11,844.00 net €14,094.36 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery across Germany via our partner shipping company – freight costs depend on postal code - Professional installation and dismantling by trained teams is optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding quote tailored to your requirements. Whether new build, modification, or extension – we provide competent advice for your racking configuration. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, shelving, and other solutions. Many systems are assembled and ready to view. Our specialist advisors are available for questions and individual advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) Nwedpfx Afeuddcgohob - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...