Used Rod Machine for sale (88,894)

Condition: used, Disc sander with spindle sander KURT EHEMANN type V K8 Combined drum sanding machine - double sanding machine, cylindrical rod sanding machine Machine no. No. 6812420 Year of construction 1968 Sanding disc diameter 800 mm Table support on sanding disc 900 x 300 mm Sanding disc speed 940 rpm Bljdpfxork U Edo Ad Ajr Table height of sanding disc 900 mm Spindle sanding unit with sanding sleeve Ø 50 mm Table support for spindle sanding unit Ø 500 mm Table height spindle sanding unit 1000 mm Spindle sanding unit speed 1410 / 2420 rpm pole-changing Motor power sanding disc 3 kW Motor power spindle grinding unit 1.1 / 1.6 kW Mains connection 380 Volt, 50 Hz - inclinable sanding table, 30° downwards/ 15° upwards - the entire table can be swiveled away from the plate for changing sandpaper - Spindle sanding unit with clockwise/anticlockwise rotation (1410 rpm for clockwise rotation, 2420 rpm for anticlockwise rotation) - Spindle sanding unit with oscillating stroke movement 10 mm - Height-adjustable grinding spindle in the table - Spindle sanding unit with inclinable rotary table, inclinable by approx. 30° - Rotary table with removable segment inserts Ø 54 / 84 / 308 mm - Pipe connection for extraction system, rectangular 100 x 170 mm Space requirement L x W x H 1500 x 1100 x 1400 mm Weight 550 kg Very good condition

Year of construction: 1985, condition: used, machine/vehicle number: 112-176, Technical data: -Bending mot. Automatic or manual mode -Bending performance square steel ST 37 up to approx. 25 mm -Bending performance flat iron ST 37 to approximately 30 x 8 mm -Bending length betw. the rotating units adjustable up to approx. 1000 mm -Faceplate with various recording profile perforations -Tailstock / recovery storage -Delay start bending / bending length twisting preselection - right - left rotation Bledpoc I Snzjfx Ad Asr -Space requirement approx. B 1750 x H 1100 X 500 mm -Drive 400 V / 0,75 kW -Weight approx. 150 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x850x1300 mm Weight 420 kg Blodsvz Hfqepfx Ad Aer Total power requirement 4,5 kw

Condition: used, ROD MILLING MACHINE LOSER MOD. DK110 - Diameter capacity: 6 - 18 mm Ø - Feeding speed: 4 -7 m/min Bsdpfx Aswrfkrod Aslr

Condition: ready for operation (used), Year of construction: 2013, I sell the sanding machine for rods Brusa Di Garboli LE Year 2013. Motor 3,7 kW. Bodpfx Aswyq E Djd Aelr Available immediately.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 750x1000x1350 mm Weight 420 kg Blodpfx Adsvz Hdte Aer Total power requirement 2,7 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 920x760x1000 mm Weight 250 kg Bledevz Hdmjpfx Ad Ajr Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Gravel and aggregate production equipment is used to crush, screen, and process stones, rocks, and other materials for the construction industry. This equipment is essential in producing various types of aggregates, including crushed stone, gravel, sand, and recycled concrete, which are used in the construction of roads, buildings, bridges, and other infrastructure projects. Here are some common types of equipment used in gravel and aggregate production: Bsdpfx Ajq Nxz Djd Aolr 1. Jaw Crusher: - Jaw crushers are primary crushers used to break down large rocks into smaller, more manageable pieces. They are essential for the initial stage of aggregate production. 2. Impact Crusher: - Impact crushers are used to crush rocks and stones with the help of impact force. They are suitable for shaping and producing fine aggregates. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They produce well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They are suitable for processing materials with high abrasiveness. 5. Screens: - Vibrating screens are used to separate different sizes of aggregates. They classify the material based on particle size and ensure that the final products meet specified gradation requirements. 6. Scalping Screens: - Scalping screens are used to remove oversized materials before they reach the primary crusher. This helps to optimize the crushing process and prevent damage to the equipment. 7. Washing Equipment: - Washing equipment, such as sand screws or log washers, is used to remove impurities and fine particles from aggregates. This is particularly important for producing high-quality concrete sand. 8. Conveyors: - Conveyors are used to transport materials between different stages of the crushing and screening process. They play a crucial role in enhancing efficiency in material handling. 9. Stackers and Reclaimers: - Stackers are used to create stockpiles of processed aggregates, while reclaimers are used to retrieve the material from the stockpile. Both are essential for efficient material storage and handling. 10. Crushing Plants: - Complete crushing plants include various types of crushers, screens, and conveyors integrated into a single system. These plants are designed to handle large volumes of material efficiently.

Condition: excellent (used), Year of construction: 1992, working width: 1,020 mm, sheet thickness steel (max.): 4 mm, stroke length: 250 mm, Motorized folding machine Fab. Schröder Typ. MAK II 1000/4,5 year 1992 Technical data Make: SCHRÖDER Type: MAK 2 Year of construction: 1992 Effective length: 1020 mm Capacity at 400 N/mm² 4.5 mm Stroke upper beam: 250 mm Bjdpfx Aougum Ijd Aslr Adjustment of bending beam 50 mm Bending angle: max. 135° Weight: approx. 2,140 kg Dimensions: approx. L 2.10 x W 1.90 x H 1.50 m Equipment - Manual backgauge with support table: 10 - 1000 mm - Double foot switch - 45° focus rail - Bending rails 10 mm, 25 mm All data without guarantee A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2002, sheet width 3220 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed 120 Grad/sec back stop - adjustable 10.0 - 1.000 mm adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 voltage 400 V total power requirement 10.4 kW weight 5950 kg range L-W-H 4565 x 2950 x 2163 mm current list price ~ 150.000 Euro with excellent features (!!) Features: - CNC electromotive universal swing bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-resistant welded construction - Rotating upper beam / as an automatic tool changing system * With 2 tool stations (sharp and goosefoot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Control panel front right (operable with PC mouse) * Color display * USB interface Bsdpsxr Rbaofx Ad Aolr * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swiveling control panel, front right - Servo-inverter-controlled drives * For bending/upper jaw & electric backgauge - CNC electro-motorized lower jaw adjustment - CNC electro-motorized backgauge * Travel speed 300 mm/sec. * With rear sheet metal support surface - 1x freely movable double foot switch - Operating instructions Optional accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool gouge rail - 2x bending rails

Condition: excellent (used), Year of construction: 1999, 1. Milling Head Debarker Baljer Zembrod - Year of manufacture 1999 - Heavy-duty cross conveyor for round timber, 4-strand - Debarking carriage - Milling head - Planing head for clean finishing - Root reducer - Operator cabin - Rails Bjdpswtpmgofx Ad Aolr - Discharge boxes

Year of construction: 2010, condition: ready for operation (used), For sale is a bending machine. Working length: 2500mm, maximum sheet thickness (at 400N/mm²): 3.0mm, weight: 3500kg. A viewing can be arranged by appointment. Bedpfxoxxl Nrj Ad Aslr

Condition: excellent (used), Catalogue number 7811 TECHNICAL DATA - Compression force: hydraulic - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 990 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Inspection window - Motor: 5.59 kW - Max. operating pressure: 150 bar - Dimensions (L/W/H): 1700x1350x1550 mm - Weight: approx. 1100 kg Bledpfxjxxlb Uo Ad Asr ADVANTAGES – Italian manufacture – Used briquetting press – Inspection window – Very good condition Net price: 35,900 PLN Net price: 8,550 EUR based on an exchange rate of 4.2 EUR (Prices may change due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Schröder Hamax 800 year of construction 2006. HAMAX 800 whole muscle stuffer is automatic filling of fresh (for example, as restructured meat) or cured meat parts/pieces of meat (for example, as raw and cooked cured meat) in artificial casings. The fundamental principle of the machine is based on a hydraulically driven piston that presses the meat into the casings. The HAMAX 800 whole muscle stuffer forms the technical requirement for increasing the efficiency in the production of sliced goods which are calibrated in length and thickness. In combination with an automated double clipping-machine, swift and efficient processing can be reached, which was previously very time-consuming for these products. The combination of the whole muscle stuffer and the integrated cutting system is the innovative factor. This affects the exact portioning of pork loins with tendon. 2x filling pipes including 95 mm & 125 mm. Bledpfx Adoxrnkfs Asr Capacity up to 1200 kg / hour.

Condition: excellent (used), Year of construction: 1995, working width: 3,000 mm, sheet thickness steel (max.): 2 mm, stroke length: 250 mm, Motorized folding machine Fab. SCHRÖDER Typ. MAK II 3000/2,0 Year 1995 Technical data Make: SCHRÖDER Model: MAK II Year of construction: 1995 Capacity: 2 mm Effective length: 3000 mm Blsdeu Hzuhepfx Ad Asr Upper beam stroke: 250 mm Dimensions: approx. L 4.10 x W 1.80 x H 1.50 m Weight: approx. 4 tons Equipment: - Manual backgauge 750 mm - Bending angle adjustment via potentiometer - Bending rails 10 mm, 25 mm - Focusing rail - Technical documentation All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: ready for operation (used), Year of construction: 2005, sheet width 3220 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed 120 Grad/sec back stop - adjustable ~ 10.0 - 2.000 mm adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 total power requirement 10.4 kW voltage 400 V weight 3750 kg range L-W-H 4565 x 2950 x 2163 mm current new price ~ €150,000 from a maintenance workshop with very good equipment (!!) Features: - CNC electro-motor-driven universal folding machine * ??High-precision mechanics with modern control technology * For single and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotating upper beam / as an automatic tool change system * With 2 tool stations (sharp and goat's foot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Touch panel at the front right (can also be operated with a PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Accurate bending simulation * Windows XP operating system - Servo-driven control Drives * for bending/upper beam and electric backgauge - CNC electric lower beam adjustment - CNC electric backgauge * Travel speed 300 mm/sec. * With rear sheet support surface (stainless steel sheets) - 1x freely movable double foot switch - Operating instructions (PDF) Special accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool goat's foot rails, H = 130 mm - 1x 10.0 mm bending rail Bledjxnqwtjpfx Ad Aer - 1x 25.0 mm bending rail

Year of construction: 2014, condition: ready for operation (used), Main Drive Bending length 2540 mm Number of axis 5 This 5-axis SCHRODER-FASTI PowerBend Professional 2500/4,0 UD was manufactured in 2014. It features a bending length of 2540 mm, usable open height of 350 mm, and R axis travel of 80 mm. Consider the opportunity to buy this SCHRODER-FASTI PowerBend Professional 2500/4,0 UD Folding Machine. Contact us for more information. Blodpfx Adsxllpfj Aor Application Types Other Sheet Metal Machinery

Year of construction: 1989, condition: ready for operation (used), An old folding machine Schröder is available. Working width: 2500mm, max. material thickness: 2.5mm, upper beam stroke: 80mm, adjustment: 160mm, speed: 120°/s, working height: 850mm, weight: approx. 3500kg. A visit on site is possible. Bedexxa U Nepfx Ad Aolr

Condition: used, functionality: fully functional, Year of construction: 2009, The ASKE machine features a 9-piece rail set for the upper beam, lower beam, and bending beam for cassette production. With the patented eccentric quick-clamp system, tool changes on the upper and bending beams require only a single hand motion. The multi-stage drive of the upper beam allows for the additional use of sharp- and radius rails. Bodpexzuv Tefx Ad Aslr

Condition: like new (used), Year of construction: 2021, Like-new drill press from Arodrill (Denmark) Bjdpowc Nhisfx Ad Aolr Capacity up to: 25 mm Mounting: MC 3 RPM: 220 - 1680 Year of manufacture: 2021

Condition: good (used), Year of construction: 2002, sheet width 3220 mm plate thickness 3.0 mm ST thickness at "Niro-steel" 2.0 mm upper clamping bar adjustment 300 mm adjustment speed 100 mm/sec 80.0 mm Bending speed 120 °/sec work height max. 869 mm back stop - adjustable 1.0 - 1.500 mm compressed air 6.0 bar control POS 2000 total power requirement ~ 8.8 kW voltage 400 V weight 4380 kg range L-W-H 4575 x 2450 x 1737 mm New price including accessories approx. 110.000 Euro From a maintenance workshop In good condition (!!) - in checked conditions - machinevideo - ?v=8jPsMSxC6pU Equipment: - Motorized universal folding machine "SERVO POWER BEND" * High-precision mechanics with modern control technology * For single and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - SCHRÖDER CNC control model "POS 2000" * With touchscreen control panel * Color display * USB interface * Automatic cutting calculation Bedpfoxcp N Rex Ad Aelr * Material and tool library * Precise bending simulation * Windows XP operating system - Servo-converter-controlled drives * For bending beam/upper beam & electric backgauge - CNC electric-driven lower beam adjustment - CNC electric-driven backgauge * Travel speed 300 mm/sec. - With rear sheet support surface, including ball transfer units - 1x freely movable double foot switch - 2x front emergency stop buttons - Operating instructions (PDF) * Optional accessories included: - 1x split set of bending rails - bottom (installed) - 1x extra bending rail 25.0 mm - 1x extra bending rail 10.0 mm - 1x extra bending tool for the top - POINT - 1x extra split set of bending tools for the top - GOAT'S FOOT * Tool height 170 mm

Condition: used, functionality: fully functional, Year of construction: 2009, working width: 3,005 mm, throat depth: 670 mm, ▪ 3000 mm working length, connectable with additional machines, incl. roller shear for max. 0.8 mm St37 ▪ Machine is portable on 6 swivel castors, lockable Bedpfsxzut Esx Ad Aslr ▪ Bending angle indicator on one side, standard on the right ▪ Insertion depth 670 mm along the machine length

Condition: good (used), Year of construction: 2003, sheet width 2520 mm Blsdpfxsxbh Euo Ad Asr plate thickness 2.50 mm ST thickness at "Niro-steel" 1.50 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm Bending speed 120 Grad/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 voltage 400 V total power requirement 7.2 kW weight 3430 kg range L-W-H 4120 x 2400 x 2090 mm Current new price ~ 100.000 euros From a maintenance workshop With very good equipment (!!) Equipment: - CNC electric motor-driven universal swivel bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotatable upper beam / as automatic tool change system * With 2x tool stations (sharp and goose foot bending rail) * Reduces set-up and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * Control panel at front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swivel control, front right - Servo converter-controlled drives * for bending/upper beam & electric backgauge - CNC motorized lower beam adjustment - CNC electric motorized backgauge * Travel speed 300 mm/sec. - with rear sheet metal support surface, including ball rollers - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 2007, sheet width 3020 mm plate thickness 2.0 mm bending angle max. 135 ° stroke of upper beam 250 mm Adjustment folding beam 25.0 mm work height max. 935 mm control SCHRÖDER NC total power requirement 6.0 kW weight of the machine ca. 3350 kg. dimensions of the machine ca. 4250 x 2300 x 1900 mm - in checked conditions - machinevideo - ?v=kyDHkc9opN4 Features: - Dynamic, powerful motorized folding machine - Used SCHRÖDER NC control unit with LCD display * Manual, setup, and automatic operation * Fast programming of individual parts * Pivoting control panel, right front - NC electro-motorized backgauge with rear sheet support surface - Manual lower beam adjustment - 1x freely movable double foot switch Bodjxacfyjpfx Ad Aolr - 1x bending tool set - 2x emergency stop buttons at the front - Operating instructions (PDF)

Condition: used, Year of construction: 2003, sheet width 1020 mm plate thickness 4.0 mm distance between columns 1100 mm stroke of upper beam 250 mm Lower beam adjustment 50.0 back stop - adjustable max. 750 mm Bledpsxab Slsfx Ad Ajr control POS 400 total power requirement 4.4 kW weight 1960 kg range L-W-H 2065 x 1500 x 1425 mm Equipment: - Robust electric-driven folding machine - With dynamic, powerful drive motors - SCHRÖDER NC control unit "POS 400" * Bending angle preselection * Control panel, right front - Manual backgauge, adjustable from the rear * Adjustment range up to max. 750 mm - Manual lower beam adjustment - 1x freely movable double foot switch - 1x set of bending tools - Emergency stop button at the front - Original operating instructions