Used Rollforming Line for sale (9,325)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation Gijdpfoyw Ndmjx Ah Nsr II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: good (used), Koenig Rex Futura II roll plant. In very good ex bakery condition. Photos show machinery whilst in storage and before cleaning. Better photos will follow. Godpfx Asvth Aueh Noir

Condition: used, mileage: 258,950 km, power: 210 kW (285.52 HP), fuel type: diesel, gearing type: automatic, first registration: 09/2018, next inspection (TÜV): 09/2027, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, Special Equipment: - Ambient Package - Connectivity Package - Black fabric headliner - Silver anodized roof rails - Front and rear parking sensors - Driver Assistance Package Plus - Fire extinguisher - Tinted, heated acoustic front windscreen - Vehicle without rear-view camera - 4-zone Climatronic automatic air conditioning - Electrically operated tailgate (open/close) - Vienna leather package with ergoComfort front seats - 9x20" alloy wheels (Nevada, black, diamond-turned) - Matrix LED headlights (high-beam technology) - Premium Memory Package - Mobile online services Car-Net - Electrically operated panoramic sliding/tilting sunroof in front with panoramic rear roof - Pearl effect paintwork - Digital radio reception (DAB+) - Smoker's package - Tire pressure monitoring system (for both regular and winter tires) - Space-saver spare wheel (weight and space saving) - Privacy glass for rear side windows and rear window - Auxiliary heater with remote control and timer (including auxiliary ventilation) - 230V power socket - Volkswagen Media Control and App-Connect / MirrorLink - Additional set of winter tires (specification required from customer) Further Equipment: - Cornering and all-weather lights / poor-weather lighting - Driver and passenger airbags - Deactivatable passenger airbag - Discover Pro navigation/audio system (touchscreen, CD/DVD, MP3, hard disk, Bluetooth) - R-Line equipment - Automatic headlight activation (ALS) - Electrically adjustable, folding and heated exterior mirrors (painted) - Chrome trim strips on side windows - Dual-tone horn - Stainless steel door entry sills with logo - Driving profile selection - Pedestrian detection assist system - Lane keeping assist (Lane Assist) - Surround monitoring system (Front Assist) with City Emergency Braking - Traffic sign recognition system - Electric windows front and rear - Front multi-function camera (windscreen) - Textile floor mats - Non-hybrid variant - Interior trims: Aluminium Wave - Cabin filtration: Dust/pollen filter with activated carbon - ISOFIX child seat anchorage points in rear (including i-Size compatibility) - 5-door body - Keyless start - Front/rear head airbag system incl. front side airbags Gedpfx Ahoynvuls Nsir - Grille with chrome trim and vertical chrome bars - Stainless steel load sill protector - 8 speakers - Heated leather multifunction steering wheel (R-Line) with shifting function - 3.0L - 210 kW V6 TDI engine - Premium multifunction display (color) - USB interface (iPhone/iPod compatible) - Rear fog light - Emergency call system - Electric park brake - Stainless steel pedals - R-Line and R-Line package - 2904 mm wheelbase - Tire monitoring display - Split/folding and sliding rear seat - Euro 6d-TEMP emission standard - Front side airbags - Rear outer seat belts with pre-tensioners - Front seat belts with pre-tensioners, height adjustable - Height adjustable front seats - Sun visors with illuminated mirrors - Start/stop system - R-Line bumpers - Lower door trim in body color - Body color exterior door handles - First aid kit and warning triangle - Front and rear seat belt reminder system - Privacy glass for rear side windows and rear window - Top sport front seats - Rain sensor

Condition: excellent (used), 4-lane depositing line with AFT depositors. Each lane has a belt width of approx. 700 mm. The first depositors is for liquid. The second depositing system is for ice cream. The third depositing system is for liquid and fruit and forth is for fruit and the fifth is for sprinkles and swirls. Approx. dimensions 15 m long Gsdpfx Ahjvg Hl Ie Nsir

Condition: excellent (used), ATIA Industries Starflex layered dessert pot Filling Line: 5 depositing heads for liquids, mousses, jellies etc., Also station for crumbles, sprinkles etc., Trifle, cheesecake, jelly. Dies for 4 pots at a time circular 3 inch also a square pot 2 1/4 inch square. Heat sealing film on top of the pots. 11 meters long x 4 meters wide. Gijdpfx Ahjvg A Hzj Nor

Condition: excellent (used), Year of construction: 2020, Complete filleting line. Includes a Baader IS-026 heading machine with take off conveyor. Into BADDER 588 filleting line Working range (approx.) Cod: 400–2,500 g / 35–70 cm Haddock: 400–2,300 g / 35–65 cm Saithe: 400–2,000 g / 35–62 cm Hake: 160–800 g / 20–47 cm Alaska Pollack (h+g): 150–450 g Gjdpfxou Dahbj Ah Nsir Throuput Up to 35 fish/ to 40 fish/min. With trimming / packing conveyors. Video is available of the complete line running on request

Year of construction: 2018, condition: ready for operation (used), An optical inspection machine Göpel for the inspection of THT components, THT solder joints and wave-soldered SMD components is available. Component clearance: 120mm, max. component height top/bottom: 80mm/10mm, max. inspection dimensions X/Y: 540mm/450mm, max. workpiece dimensions X/Y: 620mm/510mm, inspection speed: approx. 100cm²/s, machine dimensions X/Y/Z: approx. 1200mm/1400mm/1800mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Gsdpey Aaflofx Ah Neir

Condition: used, Used machine Used Ganner Compact 30 line boring machine Equipment and technical data: 2 drilling beams with 15 spindles each Pitch 32 mm Gjdpfxswhuh Se Ah Noir Position adjustment drilling unit 0 - 650 mm Distance between the rows of drill holes at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Clamping height of the workpieces max. 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Condition: used, mileage: 77,040 km, power: 63 kW (85.66 HP), first registration: 06/2020, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale reserved! Internal number: 0204. LR70391 ----EQUIPMENT - Fiesta Van: Rear seats removed - Ford Navigation including Ford SYNC 3, DAB/DAB+ - Paintwork: Frost White - ABS electronic with EBD - Airbag: Passenger airbag deactivation - Activated carbon filter - Front ambient lighting - Exterior mirrors, electrically adjustable and heated - Body styling kit - Third brake light - Headliner in black fabric - Roof console with sunglasses compartment - Roof spoiler painted in body color - Diesel particulate filter - Rev counter - Front door sill trims with 'ST-Line' logo - Electronic Stability Program (ESP) - Driver information system - Lane keeping assist including lane departure warning - Suspension: Sport-tuned - Front electric windows - Ford Easy Fuel - FordPass Connect including WiFi hotspot - Luggage compartment cover - Luggage compartment lighting - Speed limiter Godpfxsyy Hhhs Ah Neir - Cruise control - Transmission: 6-speed manual - Illuminated glove box - Rear window wiper/washer - Heated rear window - Interior lighting with LED technology - Intelligent safety system - Isofix child seat attachment - Coat hooks - Air conditioning with temperature control - Height-adjustable headrests - Radiator grille in 'ST-Line' design - LED rear lights - Steering wheel: Leather steering wheel - Adjustable steering column - Vanity mirrors for driver and passenger - Center console with integrated armrest - MyKey key system - Emergency brake lights - Package: Driver Assistance Package I - Pedals with aluminum covers - Upholstery: Fabric - Wheels: Alloy 7J x 17 - Wheels: Tire pressure monitoring system - Rear bench seat split folding 40/60 - Gear knob in ST-Line design - Intermittent wipers - Rain sensing wipers - Headlights in projector lens design - Headlights with welcome function - Headlight assist with day/night sensor - Electro-mechanical power steering - Seat: Driver's seat height adjustable - Seats: Sports seats front - Start-stop system - Ford Power start function - Bumpers painted in body color - Door handles painted in body color - Variable radiator air intake - Immobilizer - Central locking with remote control ... and much more. ----The vehicle is in an unprepared condition! Nationwide delivery available for an additional charge. Errors and prior sale reserved. We will gladly take your vehicle in part exchange. Financing / leasing possible also without down payment! Do you have further questions? We will be happy to advise you!

Condition: used, Year of construction: 2024, controller manufacturer: Sonstige, controller model: Kelch EASY 10, _____ Description: Year of manuf. : 2024 Technical Data: Toollength (max.):600 mm Tool-ø (max.):400 mm Electric connection:230V/50Hz Airpressure:6 bar In general: Control system:Kelch EASY 10 Display:24" TFT Taper:High-precisionspindle UWS-II SK50 Handling:CNC Equipment/Accessory: Positionsensor:Direct Scales Turningcentermeasuring:Incidentlight cam Tool adapters:HSK63 Dataoutput:Labelprinter Gedpfx Ahjyzv Rnj Njir Further Accessory:Autofocus (CNC-Drive in C-Axis)

Year of construction: 2026, condition: new, 30 mm extruder with cross-head for smallest coating object´s, Gisdpsf Uc Urofx Ah Ner with cooling bath, puller and winder with guiding device

Condition: used, mileage: 4,500 km, power: 84 kW (114.21 HP), first registration: 01/2026, color: green, gearing type: automatic, suspension: other, number of seats: 5, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, traction control, Roadworthy, Touchscreen, Excellent condition, Accident-free, Demonstration vehicle, Metallic paint, 5-door, One owner, Full service history, Start-stop system, Green emissions sticker (Euro 4), Partial leather, Apple CarPlay, Android Auto, Distance warning system, Rearview camera, Black, Front side airbags, Passenger airbag, Height-adjustable driver’s seat, Height-adjustable front seats, Keyless-Go, Keyless Start, Front parking sensors, Rear parking sensors, Parking assist, Parking camera, Daytime running lights, LED daytime running lights, Digital radio, Rain sensor, Side cameras, Voice control, Traffic sign recognition, Ambient lighting, Blind spot assist, Hill start assist, Tire pressure monitoring system, Linguatronic, Four electric windows, Heated seats, Heated front seats, Hands-free system, Bluetooth hands-free, Multifunction steering wheel, USB port, Cabin air filter, Tinted windows, Electrically folding mirrors, Heated exterior mirrors, Heated steering wheel, Power steering, Non-smoking vehicle, Electric exterior mirrors, Rear head restraints, Speed limiter, ISOFIX child seat mounts, Roof rails, Adjustable steering column, Luggage compartment cover, Center armrest, Lane keep assist, Driver fatigue detection, High beam assist, Additional features available, Automatic transmission, Start-stop technology, Assist systems: blind spot assist, driver fatigue detection, traffic sign recognition, rain sensor, high beam assistant, hill start assist, lane keep assist, collision warning system. Comfort: automatic climate control, power steering, central locking, electric windows, seat heating, electric exterior mirrors, cruise control, multifunction steering wheel, Keyless-Go and start, cabin air filter, front and rear Park Distance Control, keyless entry, ambient lighting, speed limiter, remote central locking. Visibility: LED daytime running lights, LED tail lights, tinted windows, rearview camera, privacy glazing. Safety: ABS, airbags, immobilizer, ESP, tire pressure monitor, child seat anchors, breakdown kit. Entertainment: navigation system. Giodpfsyzgp Ijx Ah Nsr

Condition: repair required (used), Year of construction: 2016, Manufacturer: EWAG AG Model: Laser Line Ultra Machine Type: 5-axis Laser Machining Centre Serial Number: 7195-0022 Release: 5 Year of Manufacture: 2016 Laser Source: Coherent Hyper-Rapid 50 Laserhead Laser Manufacturer: Coherent Kaiserslautern GmbH Laser Manufacturing Date: 28.01.2016 Laser Classification Machine: Laser System Class 1 according to DIN EN 60825-1:2008-05 Axes: X, Y, Z, B, C CNC Control: Fanuc 31i-5 Control Operating Voltage: 3 × 400 VAC / N / PE Frequency: 50 Hz Gisdpjytrp Nsfx Ah Ner Control Voltage: 24 V DC Rated Current: 17.3 A Connected Load: 12 kVA Max. Fuse Protection: 25 A (slow-blow) Wiring Diagram Number: 100211907 Extraction System: ULT LAS 200 Extraction System Documentation: complete Operating Hours: 35,788.02 h Note: Laser unit is defective and must be replaced Robot currently removed and being overhauled, optionally available Inspection under power possible

Condition: excellent (used), Year of construction: 2012, Roll Feed Type: BWV-125-310-P Max. strip width: 310 mm Max. strip thickness: 6.0 mm Strip cross section: 1860 mm² 2 feed rollers, diameter: 125 mm Feed speed: 135 m/min Straightening Machine Type: BRME-7-90-300-F Strip width: 50-300 mm Strip thickness at max. width: 6.0 mm Number of straightening rollers: 7 pcs Number of entry and exit rollers: 4 pcs Diameter of straightening and pull rollers: 90 mm Gisdpfx Aey Aai Doh Nsr Decoiler Type: BHE-45-520-H-BS Load capacity: 45 kN Max. strip width: 520 mm Mandrel expansion range: 460-530 mm Coil outside diameter: 2,000 mm

Condition: excellent (used), Catalogue number: 7817 TECHNICAL DATA DDCA - Double-End Tenoner - Minimum panel width: 180 mm - Maximum panel width: 850 mm - Minimum panel height: 10 mm - Maximum panel height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 4 blades included 5 spindles: Left side: 1) Top vertical spindle 2.2 kW 2) Bottom horizontal spindle 2.2 kW Right side: 1) Bottom vertical spindle 2.2 kW 2) Top vertical spindle 2.2 kW 3) Bottom horizontal spindle 2.2 kW - Spindles adjustable up/down and left/right - 2 material hold-downs - Stepless feed speed adjustment: 0–10 m/min - Central lubrication via oil pump - Pump motor: 2.2 kW - Extraction port diameter: 5 x 100 mm - Dimensions (LxWxH): 1900 x 2230 x 1530 mm DDGA - Four-Sided Planer - Maximum panel width: 130 mm - Panel height: 10–60 mm - Minimum workpiece length: 200 mm Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - Top and bottom spindle diameter: 40 mm - Right and left spindle diameter: 30 mm - 4 feed speeds: 13/20/26/40 - Central chain lubrication via oil pump - Extraction port diameter: 4 x 120 mm - Dimensions (LxWxH): 3200 x 1370 x 1830 mm DBCA - Tenoner Infeed Conveyor - Maximum feed speed: 40 m/min - Maximum panel width: 150 mm - Motor: 0.55 kW - Overall dimensions (LxWxH): 2320 x 600 x 1150 mm DBGA - Strip Infeed Conveyor - Strip length: 200–600 mm - Strip width: 30–120 mm Giodpfxsyz Nr So Ah Ner - Strip thickness: 10–40 mm - Stepless feed speed adjustment: 10–40 m/min - Motor: 0.75 kW - Overall dimensions (LxWxH): 1500 x 500 x 980 mm - Total weight: approx. 4900 kg – Polish production – DTR technical documentation included – 5 spindles – Unpainted – Very good condition – Used machine Net price: 63,900 PLN Net price: 15,200 EUR, according to the exchange rate of 4.2 EUR (Prices may vary according to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used purely for informational purposes to allow identification of the goods. We only resell items that have already been put on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: 0.25 L Individual bottle – Ø 57.5 × 215 mm 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm 0.33 L Ale bottle – Ø 68.5 × 234.5 mm 0.5 L Ale bottle – Ø 68.5 × 270 mm 0.5 L Steinie bottle – Ø 70.5 × 174 mm 0.5 L Bavaria bottle – Ø 70 × 260 mm 0.5 L NRW bottle – Ø 67 × 260 mm 0.5 L Individual bottle – Ø 82 × 295 mm 0.7 L GDB bottle – Ø 79 × 290 mm 0.75 L GDB bottle – Ø 79 × 290 mm 1.0 L GDB bottle (light) – Ø 84 × 305 mm 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: 5 × 4 – 400 × 300 × 300 mm 6 × 4 – 400 × 300 × 270 mm 5 × 4 – 400 × 300 × 210 mm 4 × 3 – 355 × 275 × 345 mm 4 × 3 – 400 × 300 × 330 mm 5 × 4 – 355 × 275 × 255 mm 5 × 4 – 400 × 300 × 290 mm Giedsytvyfjpfx Ah Njr

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Gisdpfxeyqxxxj Ah Ner Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Godpfoyqxwzox Ah Noir Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Condition: good (used), Year of construction: 2013, Grinding wheel 400 x 203 mm Regulating wheel 225 x 127 mm Fire extinguishing system Kraft u. Bauer Knoll microfilter Steuli lifting station Giedpfoyxl Drjx Ah Nsr

Condition: used, Year of construction: 2011, Overview This Paxona line distributor for trays was manufactured in 2011 and is designed to divide a single infeed lane into two parallel lanes. The system is typically used in packaging or conveying lines to distribute trays efficiently to downstream machines such as packers, fillers, or palletizing systems. With less than 5,000 operating hours, the unit has seen comparatively low usage and represents a well-preserved solution for line balancing and product distribution. Paxona equipment is known for robust construction and reliable integration into automated production and packaging environments. The distributor is suitable for tray handling applications where a stable and controlled product flow from a single lane to two parallel lanes is required. Technical Data  Manufacturer: Paxona Machine type: Tray line distributor / lane divider Function: Distribution from 1 lane to 2 lanes Year of manufacture: 2011 Operating hours: < 5,000 h Application: Tray conveying and line distribution Condition: Used, low operating hours, store Gedpfx Aoythxaoh Neir

Condition: used, Year of construction: 1997, material width 300 mm coil weight 2 x 1,25 t material thickness 0,4 - 1,2 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm no. of straightening rolls 9 straightening roll diameter 30 mm number of draw-in rolls 2 roll diameter 30 mm speed 3 - 30 m/min Gsdpfxoyx Ikne Ah Njir feed length 0 - 9999,9 mm power requirement 3,0 + 2,5 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm weight of straightening machine 0,45 t dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm weight of the feeder 0,4 t dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm Universal straightening machine SC 12-FQ with infinitely variable drive double decoiler 2352 B-FPS WITHOUT drive, with hydraulic expansion, pneumatic lag brake electronic roll feed WAV-RDS-2Z, modell 1082 B with AC-Servomotor, pneumatic intermediate lifting of the rolls

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Complete Kempner automatic L-sealing, shrink wrapping and labelling system, manufactured in 2024 and in excellent working condition. This system comprises of the following machines: Gijdpfoyrup Aox Ah Nor 1 x Kempner automatic L-sealer. Model - ZF-A6345-T. Serial number - 13677. Sealing bars - 560mm x 380mm. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2.5 kW. 1 x Kempner shrink heat tunnel (electric). Model - ZF-S550. Serial number - 22097. Electrical requirements - 380 V / 50 hz / 3 phase. Power - 12 kW / 27 Amps. 1 x Kempner automatic easy tear label applicator. Model - ZD-L1. Serial number - KL-24022-4. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2 kW. This system was previously used to pack donuts and was in production for approximately 9 months in total.

Condition: ready for operation (used), total width: 80 mm, total length: 600 mm, input voltage: 400 V, Electric Conveyor Oven Length 600cm / Belt Width 70cm / Length of Heating Coils and Heating Tunnel 200cm Gsdpfsvmdb Tox Ah Njir Machine was in production until the last day and was in working order. Dismantled in working order. No electrical control unit included. Control unit is missing. You must build your own control unit for this line. Sold without warranty, without guarantee, without return, only to businesses.

Condition: used, Year of construction: 2011, machine/vehicle number: GL11002, functionality: fully functional, power: 100 kW (135.96 HP), input voltage: 400 V, input current: 180 A, type of input current: three-phase, BUSETTI F10 double sided edging line for flat glass, still in production. Gedpfx Aheyntxbs Njir

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Maximum infeed length : 6300 mm ( Pusher ) Minimum cutting length : 50 mm Gisdoyxwyropfx Ah Nor Maximum cutting width : 360 x 30 mm / 240 x 160 mm Maximum feed speed : 60 mtr/min Main engine( Saw) : 7,5 Kw Sawblade diameter : 400 mm Year of construction: 2001 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Machine measures : Infeed : L 7600 x B 800 x H 1100 mm / Sav : L 1400 x W 1200 x H 1650 mm / Outfeed : L 5200 x W 600 x H 900 mm. Overall working hight : 850 mm Defect Detection: Automated identification and elimination of wood defects (knots, cracks, etc.). Yield Optimization: Software-driven calculation to ensure the best possible use of the raw timber. Manual in English and German / Electric diagram included. Can be examined in working condition Request WHATSAPP video