Used Rotary Evaporator for sale (4,248)

Condition: excellent (used), 36" Magnetic Table# Fsdpfjzh Ngmox Anlopk Model No 18

Year of construction: 2026, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. Fpedpfx Anezr Hw Djlok In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: good (used), Fluidair RPK47 Air compressor Fodpfxsrq Itqe Anlspk Serial: 41449 Rotary air compressor, working pressure 100PSI, Discharge pressure 8Bar, with fluidair rotastar control, 3Ph

Condition: good (used), NNP Rotary dip tank Fodpfx Aex Ebizonlopk Stainless rotary dip tank, variable speed, rotary drum length 900mm, rotary drum diameter 1100mm, central bottom drainage, previously used on fruit and veg, mobile, 3Ph

Condition: used, Year of construction: 2016, JBT International 16 Head Rotary Filler With 2 Mettler Toledo C Series /C3/C35 checkweighers Fodjzl T Tlopfx Anlepk Machine had complete refurbishment by original manufacturer 2020 "Please note the items in this lot 30466-369 are simultaneously offered in the combination lot 30466-348 as a complete line. The separate parts of the complete line 30466-348 are offered as individual lots 30466-349 to 30466-374 Bidders can bid on the complete line and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2+N7 working days."

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 1904150116, year of last overhaul: 2025, overall weight: 6,800 kg, We offer this used Forrec Granulator - 1000 R.A. rotary shear, year of construction 2019. Manufacturer: Forrec Fpjdpozmyufefx Anlek Model: Granulator - 1000 R.A. Year of construction: 2019 Condition: used Category ID: 552 Type ID: 2731 Machine type: rotary shear If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Kongskilde cyclone separator with rotary valve For sale is a Kongskilde cyclone separator, including an installed rotary valve with gear motor and connecting hose. This unit is suitable for separating and discharging chips, granules, dust, or similar materials in dust extraction and conveying systems. The cyclone is mounted on a sturdy frame and stands on a transport pallet. Scope of supply as shown in the photos: Kongskilde cyclone separator Rotary valve with drive Frame Connecting pipe and flexible hose Inspection at our warehouse is possible by appointment. If you have any questions or are interested, please do not hesitate to contact us. Fjdpfx Aozrlznsnlopk

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Working diameter: 4,000 mm Working height: 730 mm X-axis: 1,110 mm Control system: SIMATIC S7-300 Tool holder: Grinding segments Integrated dressing unit on the grinding head In 2010, the machine underwent a comprehensive mechanical and electrical overhaul. Fodpfsztc T Dex Anlopk As part of this modernization, the entire automation and drive technology was converted to Siemens technology. The machine is equipped with a MARPOSS P7 in-process measuring system. The measuring system is fully integrated into the Siemens SIMATIC S7-300 PLC control system via PROFIBUS.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Aerzen Delta Hybrid D75L Rotary Lobe Compressor Fpodpfxjyxnwhs Anlek

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 360 mm Table height: 130 mm Transmission ratio: 120 : 1 Clamping surface: 375 x 430 mm Grid pattern on clamping surface: 400 x 125 mm, Ø 14 mm - Indirect indexing via handwheel on the worm gear, transmission ratio: 120:1 - Worm gear can be engaged/disengaged for direct and indirect indexing - Clamping via 2 clamping levers in any position - Crank handle with index plate - 1 index plate with hole counts: 22, 24, 29, 36, 37, 49, 57, 63 - 1 index plate with hole counts: 16, 27, 30, 33, 41, 47, 53, 61 - 1 index plate with hole counts: 23, 25, 28, 31, 39, 43, 51, 59 Fpedsy Sbwzspfx Anljk - 14 mm T-slots in the table surface - Table surface slightly face milled Overall dimensions L x W x H: 600 x 440 x 130 mm Weight: 81 kg Good condition

Condition: like new (used), For sale is a Renishaw XL80 laser interferometer system for machine calibration, suitable for linear and rotary axes, in very good condition. The measuring device is fully functional and has been used very little. It was manufactured in 2022. The device has an accuracy/deviation of 1 nm, and the software is, of course, included in the offer. If you have any further questions, please do not hesitate to contact me. Fjdpfezrgvmox Anlspk

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Fpjdpsztm H Isfx Anlsk Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused Fpjdjztmxqepfx Anlek

Condition: used, Vacuum pump, rotary vane pump, sliding vane pump, vacuum pump, cleanroom pump BECKER Type VX 4.40 High Vacuum Pump Serial No.: 2583674 Year of manufacture: 2011 Capacity: 40 m³/h Vacuum: -0.8 bar (determined during test run) Vacuum: -0.9 bar (manufacturer's specification) Suction connection: G 3/4" Motor speed: 1420 rpm Motor power: 1.25 kW Power connection: 400 Volt, 50 Hz - dry-running, oil-free rotary vane vacuum pump - sound insulation made of polystyrene (Styrofoam) Dimensions with sound insulation housing L x W x H: 820 x 460 x 350 mm Dimensions without sound insulation housing L x W x H: 540 x 250 x 280 mm Fodozrzyaopfx Anlopk Weight: 45 kg Very good condition

Condition: excellent (used), Year of construction: 2010, Excellent condition can be demonstrated if required we also have a video of it running we have also got a tailstock if required Fjdpsq Rciljfx Anlepk

Condition: used, functionality: fully functional, overall weight: 293 kg, volume flow: 369 m³/h, LGL double flux Evaporator for Coldstores Rated capacity at 0C°/-10C°= 50 KW Fjdsztbypopfx Anlepk 5 x fans 450 mm diam.,4 pole Tube content: 49L Fin spacing: 7mm Coils anticorrosion treated w. blygold

Condition: used, Inlet diameter: 260 mm with sprocket and drive shaft Fodpfx Aszr Hg Sjnlepk

Condition: used, Inlet cross-section approximately 450 mm with SEW gearmotor, 3 kW. Fpjdpfxszr Hglo Anlsk

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Fpedpfxszcwito Anlsk Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available.

Condition: good (used), Infotec 1008 Rotary CNC machine Fpodpfx Aox Ai T Nonlok adjustable RPM, manual or auto, 3Ph

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 74 h, machine/vehicle number: PC16 / P1551, Screw compactor and two 16 Cu Mtre closed skip units all manufactured to the highest specification by De Rooij in the Netherlands. All the equipment has been used inside a security shredding unit since new. It was decommissioned in 2023 and has only seen 74 hours of use since new. This equipment has been used by a bank for shredding currency and confidential wastes, and always situated inside a secure building. All in excellent condition and perfect working order. Fpsdpfx Anev Ilpholek

Condition: like new (used), Year of construction: 2019, Ref: 11072 . 2019 Horizon RD-4055 Dual Cylinder Rotary Die Cut System Like new, ex demo condition - ONLY 5,000 on the counter! Efficient production with new separator and card stacker for labour saving operation. Features: • Die cutting, waste separation and stacking in one pass for efficient production. • A wide range of applications can be processed such as business cards, greeting cards, labels and light packages. • Maximum 6,000 sheets can be processed. • 21-up round corner business card production can processed at 126,000 cards per hour. • Simple and easy operation without relying on a skilled operator. • Uniquely designed servo motor controlled ‘Repeat-cut’ feature allows multiple-up cuts from a single up die to minimize die cost. • Ruggedly constructed yet compact compared to normal die cutters. • Various delivery options are available to process a wide range of applications. • Die-cutting and Kiss cutting can be performed simultaneously by using a die which has two different blade heights, ideal for making stickers and labels. • Creasing can be achieved to avoid image cracking. Suitable for boxes, pocket folders and greeting cards which require additional folding processes after die cutting. • Repeat-cut enables the running of multiple up imposed applications with a smaller die to reduce die cost (Up to 8 repeats) Equipped with: TOUCH PANEL: Both setup and control can be done through the intuitive touch screen. After mounting the upper and lower die, the system can be set up by simply inputting sheet size and product size. The graphical illustrations on the screen are simple and easy to understand. FEED SECTION: Fpsdpfsymmqzsx Anlsk Vacuum belt feeding enables superior feeding with easy setup and operation. An ultrasonic sensor is used for double feed detection on a wide range of substrates. The optional code reader BR-N4055 enables job separation for easy handling. TRANSPORT SECTION: Sheets are registered by vacuum belt and position is firmly secured with gripper rollers for accurate and consistent register. Servo motor driven gripper rollers ensure the die cut position without effecting processing speed. The optional alignment detection sensor ADS-N4055 detects the alignment error for additional quality control. DIE CUTTING SECTION: Rigid magnetic upper roller and solid lower anvil cylinder ensure high quality die cutting. Uniquely designed die cutting section enables easy and quick die setting. Specification: Sheet Size (Before processing): Max. W400 x L550 mm or W15.740" x L21.650" Min. W200 x L275 mm or W7.875” x L10.830” Processed Material: Normal paper, Coated paper, Cardboard Material Thickness: 127.9 to 400 gsm Die Cutting: Max. 0.5 mm or 0.019” (In case of blade height: 0.8 mm or 0.031”) Max. 0.3 mm or 0.011” (In case of blade height: 0.6 mm or 0.023”) Creasing: Max. 0.4 mm or 0.015” (In case of blade height: 0.8 mm or 0.031”)

Year of construction: 2021, condition: used, empty load weight: 9 kg, Used battery combi hammer for sale: Ideal for heavy work. Not dependent on mains power. Year of construction: 2021 incl. 2 batteries (12ah), charger and case. Drilling and breaking. Fsdpfx Anezqhp Ejlspk 3 speeds. Price: € 750,- incl. VAT Several in stock!

Condition: good (used), Complete trimming line with 2 trimmers RS 134 and a bump turn EM 130 Speed: up to 100.000 cph / 80 m/min (product permitting) min width product: ~122 mm max width product: ~530 mm min length product: ~122 mm max pagination product: 4-96p (product permitting) max thickness shingled stream: up to 13 mm infeed stream lap: ~25-100 mm min trim width: ~5 mm max trim width: ~65 mm min product width after trim: ~118 mm Infeed/delivery height: ~800 mm Trimmming line with 1st trimmer - right bump turn - 2nd trimmer Trimming line - 1st trimmer knife left Trimming line - 2nd trimmer knife left & right To be used with segmented knives Over all length equipment: ~1675 mm Over all width equipment: ~1530 mm Over all height equipment: ~1160 mm Input Power: 7,5 kW Voltage: 400 V, 3 Ph, N, PE Air requirement: practically no air requirement Suction capacity per nozzle: 900 m3/h, air speed 31m/s Weight: ~1100 kg per trimmer Fsdpfx Ajl Dn N Sjnlopk Optional equipment: second EM 130 bump turn

Year of construction: 2006, condition: good (used), Build in: 2002 - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting - infeed stream lap: ~25-100 mm Fodoh Itu Espfx Anljpk - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC - Trimming line - 1st trimmer knife left & right - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm ( infeed height~800 mm) - Input Power: ~13 kW - Voltage: 400 V, 3 Ph, N, PE, 50 Hz - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~800 kg - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr), - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request