Used Rotary Vibrator for sale (6,112)

Condition: new, table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad Tjdpfx Anjxaatnoljb turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm total power requirement 230 Volt weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: used, Year of construction: 2012, power: 800 kW (1,087.70 HP), Rotary UPS System – 800 kVA –Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 Tjdpjwuyzwefx Anlsb ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Todpfx Ashkzu Aenleb Subject to prior sale

Condition: like new (used), Year of construction: 2024, functionality: fully functional, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, fuel type: gas, Equipment: CE marking, GAZ HEIN ECOSTONE LR1 86H bakery rotary oven, 2024 model In very good condition and has only been in operation for a few months. Tjdpfx Anszpfluslsb

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Tedpfxszu Nxis Anleb Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency > 90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), functionality: fully functional, fuel type: gasoline, overall weight: 90 kg, operation weight: 86 kg, Year of construction: 2016, machine/vehicle number: 10592837, - Working speed 27 m/min - Centrifugal force: 15 kN Tsdpfovuma Ujx Anljb - Excellent maneuverability and stability when operating from the side thanks to additional grip points on the protective frame - Guide bar can be swiveled forward. This enables the vibrating plate to be pulled on a slope, for example - Central attachment of the guide bar: the plate can be turned quickly and effortlessly

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Compact footprint Unwind Web guide Web width 330 Tjdpfx Ajylpvdsnlsb In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Lateral/ Cross movement possible Waste rewinder Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg !! Available for immediate sale !!

Year of construction: 2021, condition: excellent (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: HEINRICHSGLÜCK, swiveling welding rotator -Type: DK1.000-P800 -Load capacity: 1000 kg -Control: via foot pedal Tjdpfx Aey Ul D Denlsb -Three-jaw chuck: Ø 380 mm, three-jaw chuck bore Ø 150 mm -Base plate: Ø 800 mm -Speed: 0-1.5 rpm Right/Left rotation -Axles: 2 pieces -tiltable: electric -Height adjustment: No -Transport dimensions: 1430/1040/H1175 mm -Weight: 913 kg

Condition: used, LDS V455 Vibration Testing System / Shaking Testing System Manufacturer: Ling Dynamic Systems Ltd. (LDS) Tjdpfxezulnge Anleb Shaker: V455 Machine Type: Electro-dynamic Vibration / Shaking Testing System Power Amplifier: LDS PA 1000 Power Amplifier For sale is a used vibration and shaking testing system from Ling Dynamic Systems Ltd. (LDS). The system consists of an electro-dynamic LDS V455 shaker, a PA 1000 power amplifier, and a separate fan/cooling unit. The system is suitable for generating defined mechanical vibrations, as well as for vibration, stress, and component testing. Possible applications include use in laboratories, development, quality assurance, and industrial testing. Technical data: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker: V455 System: Electro-dynamic Vibration / Shaking Testing System Power Amplifier: LDS PA 1000 Power Amplifier Amplifier Output Current Indicator: 0–20 A RMS Year of Manufacture: Not specified Fan Motor: Manufacturer: ASEA / Electrolux Elmotor A/S Type: M056SX2 Voltage: 220–240 V Current: 2.0 A Speed: 2,880 RPM Protection Class: IP54 Insulation Class: B Capacitor: 1.5 µF / 360 V Country of Manufacture: Denmark Fan: Manufacturer: Air Control Installations (Chard) Ltd. Type: 2M53 Voltage: 240 V Phase: 1 Frequency: 50 Hz Current Draw: 0.45 A Speed: 2,880 RPM Capacitor: 1.5 µF MFD: 440 VAC/WKG: 25 Made in U.K. Dimensions: The overall dimensions of the system cannot be clearly determined from the available images and nameplates. Equipment: LDS V455 electro-dynamic shaker LDS PA 1000 power amplifier Separate fan/cooling unit Shaker mounting / base frame Hoses and connection cables Transport case for the power amplifier Accessories as shown in the images Shipping data: Total weight: 240 kg Condition: Used Signs of wear and tear due to age and use are present. Dirt, paint chips, and traces of corrosion are visible. Optical condition as shown in the images. Scope of supply: 1 × LDS V455 electro-dynamic shaker 1 × LDS PA 1000 power amplifier 1 × Fan/cooling unit Shaker mounting / base frame Connection cables and hoses as shown in the images Transport case for the power amplifier Accessories as shown in the images Availability: by arrangement. Scope of supply as shown in the images. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2007, REF: MM6439 Wick und Schaefer GmbH flow-meter rotary filler set up for 500ml PET sports cap filler with bottle cap Infeed/sorter and bottle cap tightener. Manufacturer - Wick und Schaefer GmbH. Model - MIN.FM.Servo. Date of manufacture - 2007. 2-stage filling - stage 1 is main fill and stage 2 is final top up fill. With attachment for CIP. Todeza Eyuspfx Anljb Previously used for vitamin enhanced flavoured water. Overall dimensions - 3600mm long x 2130mm wide x 2300mm high.

Year of construction: 2022, operating hours: 20 h, condition: like new (used), Punch and die tooling for tablet presses with EU 25 tooling format. Consisting of: 35 upper punches 35 lower punches 35 dies Tsdpfx Aozxqbtonlsb Tablet shape: 21 x 10 oval

Condition: new, functionality: fully functional, Jainnher Machine Co., Ltd. was established in 1982 and is dedicated to developing grinding machine technology, diversity and automation equipment. Jainnher is constantly offering new and improved machinery. The new JAINNHER JHP-4015 CNC Plunge Type machine with FANUC CNC Control. Hydrostatic and Hydrodynamic bearings. Capacity Max ø work swing Ø400 mm Max grinding length 1500mm Max grinding dia. Ø380 mm Max workpiece weight 150 kgs Distance between centres 1500mm Centre height 200mm Grinding wheel Grinding wheel size Ø410 x 50-100 x 203.2mm Max peripheral 33 m/sec Wheel speed 1250rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 280mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Oil Pressure Hydrostatic = 20kg Hydrodynamic = 3kg Tailstock Retraction of quill 30mm Quill diameter 70mm Centre taper MT.4 ( MT.5 option) Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Tjdsnzib Espfx Anlsb Centre taper MT.4 ( MT.5 option) Spindle type Telescopic (option Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +7º/-4º Rapid traverse speed 10m/min Max. travel 1500mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 7.5HP 4P(opt. 10.0HP) 4P Workhead motor 1.5KW Work table (Z axis) 1.8KW Work table (X axis) 1.8KW Hydraulic pump 1/4 HP 4P Wheel head pump Hydrostatic = 2.0HP Hydrodynamic = 1.0HP Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 60L Wheel head lubrication 50L Coolant tank 160L Machine N.W (Fully enclosed) 8080 kg G.W (Fully enclosed) 8480 kg Dimension (Fully enclosed) 4900 x 2100 x 2000mm Packing (Fully enclosed) 5090 x 2200 x 2200mm

Condition: new, functionality: fully functional, he EUROPA JAINNHER JHV-1008CNC vertical grinding machine is designed for grinding of large components used in the transport, aerospace, power generation, oil & gas, hydraulic and precision components. With a grinding internal diameter range from Ø50 to 800 mm, a maximum outside diameter of Ø1000 mm. The maximum height of the workpiece is 800mm, with a maximum worktable load of 1200 kg. EUROPA Jainnher JHV-1008 CNC Vertical Grinder Capacity Range of I.D. grinding 50 – 800mm Maximum O.D grinding 1000mm Z axis maximum grinding height (OD) 800mm Z axis maximum grinding height (ID) 50 – 250 : 325mm / 250 – 800 : 800mm Maximum swing diameter 1000mm Maximum installed component height 800mm Maximum work table load 1200kg Email for latest factory build availability Tsdpsnzkvhefx Anljb

Condition: new, functionality: fully functional, NEW Rotary table surface grinder available in the UK. With up to a 400mm grinding diameter on this rotary table, vertical spindle surface grinder from Italian manufacturer DELTA, a leading surface grinder manufacturer with over 20,000 units sold worldwide. The rotating table is controlled by asynchronous three-phase bipolar motors with 8/16 poles; thanks to these motors, the table can rotate at a speed of 40 rpm and at a rate of 30 rpm. Delta Rotary surface grinder Maximum grindable surface 400mm Ø Distance between column and wheel axis 315mm Max. distance between magnetic table and wheel 205mm Rapid feed per turn of handwheel 2mm Micrometric feed by small handle 0,01mm Size of cup wheel 200 x 80 x 78mm Ø Size of abrasive segments 50 x 20 x 90mm Tedponziakjfx Anlob Motor power of the wheel (4 HP)-3 kW RPM of the wheel (50 Hz) 2840rpm/min Electropump motor power (0,08 HP)-0,06 kW Mass of the machine 680kg Rotary table surface grinder Standard Equipment Low tension electric system (24V). Cooling system with electropump Wheel-holder flange and grinding wheel. Grinding wheel guard Table guard.- Stakes key Instruction book/testing certificate Two colour painting RAL 5018-7032, bicomponent multicoat of paint CE conformity certificate with respect to the Units Directive CEE 89/392 and subsequent modifications Stock machine complete with Automatic Downfeed control

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, automatic traversing table BAUMANN BSB 2L, serial no. 212.880, size 64x92 cm air table, air-blowing roller, maximum layer height: 160 mm Tsdszwdi Iopfx Anljb Power: 2 kW 400V - 50Hz - 5.5A Net weight: 550 kg

Condition: used, Year of construction: 1999, plate width 2980 mm plate depth 3000 mm plate height 1400 mm total power requirement 11 kW Tedpfxegxqvzs Anleb

Condition: used, centre height / mm weight 110 kg Tjdpfx Ansy Suqzsleb diameter 400 mm

Condition: used, centre height / mm O. 600 mm Tedpfjzcq Euex Anlsb Weight: 340 kg

Condition: used, centre height / mm weight 110 kg diameter 360 mm Tedpfx Aey Sup Rjnlob

Condition: used, centre height / mm Tedpfx Aoy S Dylenlsb weight 160 kg diameter 500 mm

Condition: used, table diameter 500 mm weight of the machine ca. ca. 0,2 t Tsdpfx Aoylz D Hsnljb table height / mm

Condition: used, table diameter 630 mm Todoymf U Espfx Anlsb weight of the machine ca. ca, 0,35 t table height 220 mm

Condition: used, centre height / mm Todpsy Sul Eofx Anlob total power requirement / kW weight of the machine ca. 450 kg

Condition: used, centre height / mm O. 600 mm Weight: 340 kg Tjdpfx Anozcghfeleb

Year of construction: 1989, condition: good (used), For sale is a fully functional welding positioner from APS. Model 1000 E Year of manufacture: 1989 Machine number: H1-008 Tjdpfx Anjcl Ttvolob Speed range: 0.3-1 rpm 64mm hollow shaft Tilts left and right approximately 135° Space requirement: approximately 1700x1700mm Weight: 750kg