Used Round Bar Tables for sale (30,717)

Condition: excellent (used), sturdy workbench 1500 x 1500 mm height 835 mm 35 mm thick plywood panel Fpsdpfjzmuxrox Anlok

Condition: used, Year of construction: 1984, operating hours: 29,950 h, functionality: unexamined, machine/vehicle number: 6051, Used BOGE screw compressor, model VEX 40D11, from industrial stock. Robust, proven technology with documented operating hours, control system, and cooling. Suitable for workshops, backup operation, or further use. Technical data: - Power: 30 kW - Volumetric flow rate: approx. 4.0 m³/min Fedpfxjzrn Ahj Anlepk - Maximum pressure: 10 bar - Speed: 4,360 rpm - Connection: 380/400 V, three-phase - Current operating hour counter: 12,622.7 h - Documented previous counter reading: 17,326.4 h - Documented total hours: approx. 29,950 h - Base load/idle control via pressure switch FF142 - Switching range: 8.5–9.5 bar - WILO industrial circulation pump Condition: used and commensurate with its age. In operation until dismantling; no functional test currently performed, therefore functionality is unverified. Sold as is, as viewed, or according to the photos. Location: 65618 Selters (Taunus), Germany.

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of construction: 2012 ----- Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 180 cm³ / revolution Flow rate: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm - Pressure regulator PARKER Type PVCMEMZN1 Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 46 cm³ / revolution Flow rate: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 16 cm³ / revolution Flow rate: approx. 23 liters/min. at 1440 rpm (calculated value) Maximum speed: 3000 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1440 rpm Motor power: 11 kW Fodszqgllepfx Anlopk ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Displacement volume: VG max. = 16 cm³ / revolution - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1450 rpm Motor power: 7.5 kW ----- Power connection: 400 Volt, 50 Hz - Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil content) Overall dimensions with attachments L x W x H 2700 x 2250 x 2840 mm Weight: 3500 kg very good condition

Condition: used, power: 5.5 kW (7.48 HP), cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 6,500 rpm, rotational speed (min.): 4,000 rpm, total length: 2,700 mm, total width: 2,000 mm, total height: 1,700 mm, overall weight: 800 kg, No. 3277 Sliding table saw Panhans 684 Used Sliding table length 2600 mm Cutting width 1250 mm Max. saw blade diameter 450 mm Motor power 5.5 kW Speeds 4000 / 5000 / 6500 rpm Manual saw blade tilting 0° - 45° Manual cutting height adjustment Mitre fence on the sliding table Cross-cut table approx. 1400 x 650 mm LW Cross-cut fence extendable up to 3200 mm Mobile machine base Transport dimensions approx. 2700 x 2000 x 1700 mm LWH Weight approx. 800 kg Fpjdpfx Aszcc R Nenlok Sale on behalf of customer, ex location near 73433 Aalen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: new, Year of construction: 2022, machine/vehicle number: 22-10-12-042, functionality: fully functional, power: 5.5 kW (7.48 HP), saw blade diameter: 450 mm, height adjustment type: electric, actuation type: electric, table height: 910 mm, Equipment: documentation/manual, saw blade guard, scorer, Altendorf F45 - Pro-Drive Year of manufacture: 2022 Accessories: 2-axis scoring unit Rapido (with pivoting function), safety device, LED lighting, table extension 840 mm, double roller carriage with a length of 3000 mm, miter gauge 3200 mm PAK, parallel fence DIGIT x 1000 mm, DUPLEX 1350 mm, single tilting fence Due to a change in production, the machine was no longer put into operation and is therefore new. An identical model is still in use. The machine has never been used for production purposes and was only stored. The machine is being sold as part of the closure of our carpentry business. Collection price - delivery possible upon request. The sale is made with the exclusion of any warranty for defects in materials and workmanship. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fpsdpfx Ajziu Rtenlok

Condition: used, Year of construction: 2022, empty load weight: 52 kg, fuel type: gasoline, Several well-functioning two-wheel tractors with mower bar for sale: Fpsdpfx Anszqhpxeljk Briggs & Stratton engine 4,5HP Mower bar of 87 cm. Self-propelled, forward and reverse. In very good condition! Price: € 900,- ex. VAT Several in stock!

Year of construction: 2008, condition: good (used), Freeze Dryer Kaeser TE 141 SECOTEC® Serie for compressed air systems Technical specification: Flow rate: 14,3 m3/min Gauge pressure aiir system: 3-16 bar Power consumption: 1,6 kW (at 100% flow) 0,88 kW )at 50% flow) Power supply: 400 V, 50 Hz, 3 Ph Fpsdpfxsg A D Eus Anlsk Rated current: 4,6 A Dimension (W x D x H) : 1060 x 1520 x 1513 Weight: 660 kg

Condition: excellent (used), Year of construction: 2007, Build in 2007 Pressure max 16 bar Fpjdpjg Dctysfx Anljk Desiccant dryer, heatless regenerated

Condition: used, Year of construction: 1995, Product size: max 480 x 320 mm; min 200 x 110 mm Bar length: 800-1200 mm Fsdoq Tcqvjpfx Anlopk Pallet type: Euro pallet Pallet height (including pallet): max 1450 mm Cycle time: min 30 s/unit Air requirement: 10 Nm3/h at 6 bar Electrical connection: 380 VAC Electrical connection: 50 Hz Electrical power consumption: 5.5 kW Dimensions (L x W x H): 2000 x 3000 x 3100 mm Weight: 2000 kg Equipment Control system - Siemens control - Pallet despencer - Pallet conveyor line

Condition: good (used), Pressure vessel Fpodpfx Ansg A Hc Hslek 11 bar, 1500 Liter litre

Condition: good (used), Year of construction: 2006, Built in 2006 Size max 670x390 mm min 205x140 mm Speed 3.900 c/h Description: - with round corner device - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube Fpsdpfxozlbdrs Anlsk - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery

Condition: good (used), Year of construction: 2015, Energy Saving Refrigerant Dryer Fpjdsg A Hcxjpfx Anljk Build in 2015 Pressure 14 bar

Condition: good (used), Year of construction: 2001, Year of construction: 2001 Product size: max 480 x 320 mm; min 200 x 110 mm Bar length: 800-1200 mm Pallet type: Euro pallet . Pallet height (including pallet): max 1450 mm Fodpeq Tcndsfx Anlopk Cycle time: min 30 s/unit Air requirement: 10 Nm3/h at 6 bar Electrical connection: 380 VAC Electrical connection: 50 Hz Electrical power consumption: 5.5 kW Dimensions (L x W x H): 2000 x 3000 x 3100 mm Weight: 2000 kg

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Fpsdpfx Ajg A Hcuenlek

Year of construction: 2006, condition: used, Built in 2006 Speed bundles/min 40 Pakete/min Size packaged good width max 340 mm Fodpfx Ajdanl Hsnljpk min 150 mm Size packaged good: height max 480 mm min 10 mm Size packaged good: length max 500 mm min 150 mm Size packaged good: diagonal max 600 mm Package weight: max 25 kg Electric supply: 400/50 V/Hz Speed: max ca. 24-55 m/min Weight: 150 kg (approx.)

Year of construction: 2000, condition: ready for operation (used), Labeling transfer table Built in 2000 Fsdped N Ehyofx Anlspk

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Fodjg A Hcqepfx Anlepk

Year of construction: 1997, condition: good (used), Build in 1997 Power 75 KW Pressure: 9 bar Fpedpfx Anjg A Dypslok

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Fodpfx Aog A Hcmsnlopk

Year of construction: 2001, condition: good (used), Built in 2001 Fjdpfx Asf Sfm Ronljpk Power rating main engine 22 kw Air pressure 10 bar Air consumption 3,10 Nm³/min. Tension 400 V Typ: Öleingespritzter Schraubenkompressor, schallgedämmt

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Fjdpfxozhm Dps Anlopk Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Crosscut fence with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 2011, Slider length: 3000 mm Cutting width with fence: 1000 mm Cutting width with rip fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Fpedpozdza Djfx Anlsk Fence adjustment: electric / position control Rip fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Fence display: digital display Rip guide display: scale Rip guide with miter function: yes Saw blade diameter: 450 mm Speeds: Vario Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, Rev. Speed: 9 revs/min Height: 900 mm (35.43 in), adjustable ±50 mm (±1.97 in) Fpodjtp I Dcspfx Anlok Diameter: Ø 1150 mm (45.27 in) Electricity supply: 250 W, 1 A, 230 V, 1 Ph, 50 Hz (110 VAC, 2 Amps, 60 Hz) Castor wheels with brakes Load: 80 kg (176 lbs) Materials used: stainless steel AISI304, food grade ALU and PE CE marking

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence Fpjdpfx Anszt Ai Ejljk with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, Year of construction: 1987, total length: 2,800 mm, total width: 1,700 mm, total height: 1,300 mm, Colour: Green Weight: 500 kg - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 87-7-23 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 145 - Parallel stop displacement [mm]: 1100 - Roller table length [mm]: 2800 - Table width [mm]: 1150 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Manually adjustable axes: Cutting height, Tiltable - Spindle speed: Manual - └ Min. spindle speed [rpm]: 3000 Fodpfxsy Ttrae Anlepk - └ Max. spindle speed [rpm]: 4000 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 2800mm x 1700mm x 1300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels