Used Router for sale (357)

Condition: used, Year of construction: 1988, - with lateral crosscut saw Hodpfxsbaz E Aj Acrsl

Condition: used, machine/vehicle number: 008167, X axis working area: 6000 mm Y axis working area: 1750 mm Hjdpfx Acjx A Hczjrjl Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 30 Total number of tool changer positions: 72

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: workshop-inspected Column extension: 750 mm Spindle stroke: 100 mm Hodjw I U Udjpfx Acrol Max. clearance between table and spindle: 310 mm Spindle speed: 10,000/20,000 rpm Motor power: 2.2/3.3 kW Tool clamping: collet chuck With air blast device via compressed air connection External dimensions: 905 x 1380 x 1600 mm Weight: 533 kg Availability: by arrangement Location: Hochheim

Condition: used, used, good condition Make Frommia Type FS60 Hjdsvwf Tfopfx Acrel GS tested Motor 3.2 kW Collet holder 6, 8, 12 Engine 2 speeds 12,000

Condition: used, machine/vehicle number: 008431, X axis working area: 6360 mm Y axis working area: 1905 mm Working Table: Pod and Rail Number of controlled axes: 5 axes Total number of drilling spindles: 10 Hjdpjym Rphjfx Acrel Total number of tool changer positions: 60

Year of construction: 2018, condition: as good as new (ex-display), Technical Specifications • Space-saving fixed table - moving gantry design for small machine footprint • Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety • Open machine bed for easy loading and unloading by forklift or overhead crane • High preload profiled linear bearings with cover strips on all axis • Brushless digital A/C servo drives and motors on all axis • Dual side drive and synchronized X-axis; no twist under load like applicable to a single center-mounted ball screw or cantilevered design • Rack and pinion drive system on X and Y axis • High precision ball screw on Z axis (anchored at both ends) • Low-backlash planetary gear boxes • Fully closed cable carriers prevent the cables from damage by chips and fine dust • High quality, shielded cables for energy chains are a guarantee of reliability • Work area X axis 3,050 mm • Work area Y axis 1,550 mm • Z-axis clearance 200 mm • Z-axis travel 280 mm • Maximum feed rate 80 m/min • Network connection via Ethernet Hsdpfsflpmdex Acrol • Remote Administration via Internet • Dimensions approx. 3,460 x 2,460 x 1,930 mm (L x W x H, without safety devices) • Weight approx. 3,500 Kg CNC Control System • Siemens Sinumerik 808D Advanced • Color LCD display • IP65 protection for CNC front panel and machine control panel • Preassigned keys for common functions, such as handwheel selection, tool change, coolant control or program testing • 7-segment display for tool number • Spindle control with spindle override (rotary switch with 15 positions) and feedrate / rapid traverse Portable MPG with handwheel, axis selector and resolution switch, E-stop button • Fast data transmission via USB stick (on the operator panel front) and high-speed Ethernet Interface Servo Motors and Drives • Siemens Sinumerik Digital Field Bus • Siemens SINAMICS V70 servo drives • Siemens SIMOTICS S-1FL6 servo motors • Siemens pre-assembled MOTION-CONNECT cables Automatic Tool Change Spindle • Spindle power 8 KW (S1) / 10 KW (S6) • Maximum speed 24,000 RPM (software controlled) • Ceramic bearings • Electric fan for cooling • Toolholder ISO-30 • Max. 26 mm (1 1/4") tool diameter with ER-40 tool holders • Temperature sensor • Safety interlock for tool in spindle • Air pressure sensor Dust Collector for Automatic Tool Change Spindle • Hose diameter 120 mm • Manual height adjustment • Pneumatic operation Tool Magazine • Linear tool rack, mounted outside of work area at the backside of the machine • Maximum 12 tool positions possible • 4 fool holders ISO30 / ER32 are included 6 Zone Vacuum Table • Phenolic work surface (thickness 25 mm) with grid • Zones individually valved High pressure vacuum pump according to customer requirements Precision Tool Length Sensor CE Package Delivery, commissioning & training as per requirements

Year of construction: 2017, condition: as good as new (ex-display), Technical Specifications • Space-saving fixed table - moving gantry design for small machine footprint • Single structure welded, stress relieved and machined all-steel base frame, gantry and gantry feet • Steel structures are reinforced with heavy ribs to resist flex and dampen vibrations • Each machine design is efficiently optimized and validated by using Finite Element Analysis (FEA) to ensure quality, performance, and safety • Open machine bed for easy loading and unloading by forklift or overhead crane • High preload profiled linear bearings with cover strips on all axis • Dual side drive and synchronized X-axis; no twist under load like applicable to a single center-mounted ball screw or cantilevered design • Rack and pinion drive system on X and Y axis • High precision ball screw on Z axis • Low-backlash planetary gear boxes • Fully closed cable carriers • High quality, shielded cables • Work area X axis 3,050 mm • Work area Y axis 1,550 mm • Z-axis clearance 280 mm • Z-axis travel 480 mm • Maximum feed rate 80 m/min • Network connection via Ethernet • Remote Administration via Internet • Weight approx. 4,000 Kg CNC Control System Hedpeflprijfx Acrel • FlexiCAM ACS Control System Pro • Powerful industrial CNC control system “Made in Germany” • DIN-ISO 66025 G-Code compatible • Graphical CNC simulation • Industrial PC with 17” Touchscreen display as HMI • User-friendly machine control panel with mode selectors and function keys • Spindle control with spindle override and feedrate / rapid traverse override (rotary switches) • Portable MPG with handwheel, axis selector and resolution switch, E-stop button • Windows keyboard and mouse • Fast data transmission via USB stick (on the operator panel front) and high-speed Ethernet Interface • Remote Support via Internet • Touchscreen and machine control panel are integrated into enclosure Servo Motors and Drives • Digital servo drives with AC servo motors • High resolution absolute encoders (17 bit) • EtherCAT fieldbus Automatic Tool Change Spindle • Spindle power 10 KW (S1) / 12 KW (S6) • Maximum speed 24,000 RPM (software controlled) • Ceramic bearings • Electric fan for cooling • Toolholder HSK-63F • Max. 26 mm (1 1/4") tool diameter • Temperature sensor • Safety interlock for tool in spindle • Air pressure sensor Dust Collector for Automatic Tool Change Spindle • Hose diameter 120 mm • Manual height adjustment • Pneumatic operation Tool Magazine • Linear tool rack, mounted outside of work area at the backside of the machine • Maximum 12 tool positions possible • 4 fool holders HSK-63F / ER40 are included Precision Tool Length Sensor 6 Zone Vacuum Table • Phenolic work surface (thickness 25 mm) with grid • Zones individually controlled High pressure vacuum pump according to customer requirements 4x Popup Pins Automatic Central Lubrication (Grease) CE Package Delivery, commissioning & training as per requirements

Condition: excellent (used), Year of construction: 1996, Description follows Hjdpjxzk Ncjfx Acrol

Year of construction: 1978, condition: excellent (used), I sell the top router for copy milling Žičnica FPŽX 300/200, Made in Jugoslavia in Ljubljana, Slovenia. Hsdpfxod Nzfce Acrol

Condition: used, machine/vehicle number: 008016, X axis working area: 3300 mm Hodpfx Acew Idhmorsl Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 10 KW Number of controlled axes: 5 axes Total number of drilling spindles: 35 Total number of tool changer positions: 14

Condition: used, No. 3205 Copy router Reichenbacher RMF Used For copying, enlarging or reducing a model (wooden figure) Creates a wooden blank (wooden figure) in the desired size Clamping length max. 1000 mm The machine requires a base area of approx. 2500 x 2500 mm LW Sale on behalf of customer, from location near 95485 Warmensteinach, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location Hedpfx Aov Hdg Necrsl

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Y axis working area: 1535 mm Hodsw Idgvspfx Acrsl Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 006054, X axis working area: 5300 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 5 axes Total number of drilling spindles: 32 Total number of tool changer positions: 8 Hsdpowcx T Ujfx Acrsl

Condition: good (used), Year of construction: 2000, For Sale: AXYZ 4010 CNC Router (Year 2000) – Made in Canada, Reliable & Versatile We are offering a pre-owned AXYZ 4010 CNC Router, manufactured in Canada, from the year 2000. Known for its durability, precision, and versatility, this CNC router is ideal for various cutting, engraving, and milling applications. It has been well-maintained and remains in good working condition, making it a cost-effective choice for businesses looking to enhance their machining capabilities. Specifications & Features: Work Area: 1220mm x 2540mm (48" x 100") Table: vacuum table Spindle Type: 2x High-speed router spindle Control System: AXYZ proprietary CNC control Drive System: Stepper motor-driven for precision movement Material Compatibility: Suitable for cutting wood, plastics, aluminum, composite materials, and more Software Compatibility: Works with standard CAD/CAM software Manufactured In: Canada Condition: Used, in good working order Key Benefits: Canadian Quality: Built to high manufacturing standards for reliability and longevity. Precision & Efficiency: Capable of intricate cuts and engravings with high accuracy. Versatile Applications: Ideal for signage, woodworking, prototyping, and light metalwork. Cost-Effective Investment: A budget-friendly alternative to purchasing a new CNC router. This AXYZ 4010 CNC Router is an excellent addition for workshops, sign-making businesses, and fabrication shops seeking a dependable machine at an affordable price. Hodpjvzagujfx Acrel

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control IMATRONIC 231 (IMAWOP) Max useful working area (without edge banding process) mm 5000 x 1630 x 100 Max useful working area (edge banding process) mm 3900 x 1450 x 60 (panel thickness) No. 8 movable rails (supports) length mm 1200 LED displaying both the axe X and axe Y position Vacuum cups (with No. 1 vacuum pump, capacity 140 m3/h) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process Hsdpfx Aefbmqtscrol No. 2 Vertical Electro-spindles HSK F63 (1 x Kw 11 + 1 x Kw 7,5) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 6 Independent horizontal boring spindles (1 x Kw 3) Banding group on board - Glueing Unit (Hot Melt Glue) VT 50 Edge coils supporting unit (No. 6 reels) OPTIONALS: No. 1 Circular Saw to cut and for grooving - max diam mm 200 (90°) No. 1 Aggregate Flush-Trimming/Scraping Unit No. 1 Cross aggregate with No. 4 horizontal boring spindles

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Hjdpfsw Dc Nisx Acrsl Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type - Front emergency carpets Numerical Control Type PowerControl PC 85 - Software WoodWop No. 10 Supports/Rails (mm 1340) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store at No. 18 folds) Max. useful working area (X - Y - Z) mm 6175 x 1550 x 60 Max. useful working area (X - Y - Z) in edge banding mm 6000 x 1475 x 60 No. 2 Working areas - No. 2 Vacuum pumps (capacity m3/h 100 each) Motorized carpet to evacuate the wastes from the working process Total installed power KW 27 Hedeh Ucn Repfx Acrol Working groups (top) No. 17 Independent vertical boring spindles (power of the drilling head Kw 2,2) No. 4 Independent horizontal boring spindles No. 1 Vertical main Electro-spindle HSK F63 Kw 11 No. 1 Circular Saw 0°-90°) diam. (mm) 125 No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 2 reels/Coils)

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding process) mm 3100 x 2000 x 100 Max useful working area (edge banding process) mm 3100 x 1925 x 60 (panel thickness) No. 6 movable rails (supports) length mm 1400 LED displaying both the axe X and axe Y position Vacuum cups (with No. 1 vacuum pump, capacity 250 m3/h) Safety side metal grids and front emergency carpets No. 1 Vertical Electro-spindle HSK F63 ( Kw 18) Automatic Tools Changing System, with 18 folds (places) No. 14 Independent vertical boring spindles (2 x Kw 1,2) Aggregate Boring Unit, "cross" shape, with 4 horizontal spindles + Circular saw (diam. mm 125) Banding group on board - Glueing Unit (Hot Melt Glue) VT 100 Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate "FLEX 5" Mod. VARIO NC No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit Hodpfxjq Nmute Acrsl No. 1 Bar Code Reader

Condition: excellent (used), C.N.C. WORKING CENTER with 5 axes (X-Y-Z-C-5) routering, boring, cutting and edge banding Goose-neck machine - Front emergency carpets Safety cabin (enclosure) of the working head Numerical Control Type ICOS CNC - Software IMAWOP Working table with pods and rails (No. 8 rails x mm 1400) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store with No. 18 positions) Useful working area (X - Y - Z) mm 4000 x 2100 x 300 Useful working area (X -Y - Z) in edge banding mm 4000 x 1800 x 60 Hjdpfjhu U Nxjx Acrol Nr. 2 Working areas - Vacuum pump / capacity (m3/h) 140 Motorized carpet to evacuate the wastes from the working process Separate electric and command cabinet - Total power installed Kw 32 Working group (top head) Nr. 21 Independent vertical boring spindles (4 X Kw 1,2) Nr. 1 Vertical Electro-spindle HSK F63 ROBOT (Kw 16) Edge Banding group (ready on board) with Glueing Unit (Hot Melt) VT 100 Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Edge coils supporting unit (Nr. 2 reels) OPTIONALS: Circular saw aggregate (diam. mm 200) Combined aggregate (Flush-Trimming/Scraping) Drilling Aggregate (with 4 horizontal boring spindles)

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X, Y, Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. A high-class CNC milling machine designed for material removal, due to a whole range of configurations, it is used in many industries: industrial, electronic, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with friendly CNC control systems, thanks to so they can be easily operated by both experienced and novice operators. Training included in the price at our headquarters! MACHINE AVAILABLE ON STOCK! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 2100x3100 mm (up to 2680 x 3600 mm) Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1450 kg Machine dimensions 2680 x 3600 x 2200mm Table height 715mm Vacuum pump 7.5kW Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives WARNING! The machine is equipped with the function of remembering the last G-code track. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Hodjg Ngixopfx Acrol Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h The highest class safety barriers: Optional top-quality light barriers available. The safety zone determined by the sensors does not allow you to enter the machine's working area. A set of barriers ensures the safety of the operator. Z-axis gate height up to 450 mm UCANCAM V11 software (possibility to import files from Corel, Autocad). File import/export, editor and insertion of these text. Tool set: cutters, drills, holders. *Unloading and placing the machine on the customer's side. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis by 350 mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP control - digital data processing The machine is equipped with the function of remembering the last G-code path - in the event of a failure or power interruption, it starts working from the last point without losing time and material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Efficient and precise CNC CORMAK C1325 milling plotter, has a structure made of steel and cast iron, which provides it with adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood or PVC, plexiglass, dibond. Dissecting table with four independent vacuum sections with dimensions of 1300x2500 mm. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1080 kg Machine dimensions 2100 x 3100 x 2200mm Table height 715mm Vacuum pump 5.5kW (included) Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h Hjdpfxef Eyqqs Acrel Highest class security barriers: Optionally available highest quality light barriers The safety zone determined by the sensors does not allow you to enter the machine's operating area A set of barriers ensures the operator's safety Gate height in the Z axis up to 450 mm UCANCAM V11 software(possibility to import files from Corel, Autocad). File import/export, text editor and input Tool set: mills, drills, holders *Unloading and positioning the machine by the customer. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis for 350mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP Control - Digital Data Processing Machine equipped with the function of remembering the last track of the G-code (In the event of a power failure or interruption, it starts working from the last point without losing time and material.) The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2026, CORMAK C2030 CNC milling machine is intended for machining and cutting wooden materials, particleboards, MDF, OSB, plywood, plastics, PVC, acrylic glass. Device mainly designed for usage in furniture and modelling industries. 2100×3100 mm working table. Hodpfxeiz A Rqj Acrol The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X,Y,Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. CNC milling plotter CORMAK C2040 is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass, dibond and metals. The plotter is mainly intended for use in the furniture and modeling industries. Dissecting table with four independent vacuum sections with dimensions of 2100x4000 mm. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2100 x 4000mm, Hsdpfx Acovupr Tjrjl Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor Linear bearings: trapezoidal rails, Hiwin carriages Spindle High-quality brushless spindle that is characterized by durability. Additionally equipped with an innovative AIR / not liquid cooling system! The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing Digital Signal Processing The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2100x4000mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1580 kg Machine dimensions 2270x4570x2200mm Table height 715mm Guides linear Vacuum Pump 7.5kW or 5.5kW (optional) Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: new, Year of construction: 2026, PREMIUM VERSION MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXIS. High-class CNC milling machine designed for the subtractive processing of materials, due to the whole range of configurations, it is used in many industries: industrial, electronics, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with user-friendly CNC control systems. The price quoted is for the machine itself, excluding additional equipment, installation, transport and training. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Work table The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2010 x 3010mm, Dissection table with four independent vacuum sections. Drive Hjdpfoiz S Hajx Acrol SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions, The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor, Linear bearings: trapezoidal rails, Hiwin carriages. Spindle The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing - digital signal processing. The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to operate without having to load the program each time. We offer machine tools with real CE EU DTR - certified by the best in the EU. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2150x3200mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1450 kg Machine dimensions 2680x3600x2200mm Table height 715mm Vacuum pump 7.5 kW (optional) Underpressure 440 mbar Guides linear Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Year of construction: 2019, condition: new, GOMA GS-900 Router Manufacturer GOMA Model / type of the GS-900 machine Production year 2019 Machine category Router Location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Cost of delivery Customer cover Startup Type Hodpfx Aofbl Epocrel to be agreed Description Comments Value Data Spindle speed 9000 - 18000 rpm Two-speed engine 3.2 / 2.4 kW Head rotation +/- 45 ° Vertical table travel 150 mm Table dimensions 700 x 800; (700 x 1200) mm The GS-900 router is intended for processing solid wood and wood-based materials, i.e. chipboard, MDF, etc. Characteristic: - processing of solid wood and chipboard, - milling of grooves in plates, edge profiling according to a curvilinear route or a straight line, - remote control for working with templates extended from the table, - double bearings allow you to use the full engine power, - pneumatic smooth lowering of the spindle controlled by a pedal, - spindle tilt in the range of +/- 45 degrees. Machining of very short, very long, complex curved edges or other unusual work requires the use of special equipment necessary for safety reasons. This tooling must sufficiently cover the tool and guarantee reliable material guidance to prevent kickback or kicking. The headstock is tilted sideways manually; the vertical position is determined by the removable pin. In the table, coaxially with the tool, there is a retractable pin D = 10 mm. After extending and installing the bearing, it provides guidance for the template with the workpiece. Clamps that can be purchased at Lignum can be used to attach the item. The tool is mounted directly in the spindle. Combined with reinforced bearings, this allows high feed rates. ATTENTION!!! The purchase of tools lies with the buyer. Spindle lock yes Table Length 1200 Spindle length mm 700 Number of heads piece 1 Number of engines pcs. 1 Number of pistons pcs. 1 Number of Spindles pcs. 1 Maximum Working Length mm 2500mm Maximum Working Width mm 1200 Maximum cutting height mm 150mm The machine has CE marking yes Engine power kW 3.2 / 2.4 kW Supply voltage V 380 New machine yes Spindle speed rpm 9000/18000 Security Guards yes Full Operation and Maintenance Documentation yes Extraction connection mm yes 70 mm Table working surface mm x mm 1200x800 Noise Level Db 50 db Manual adjustment yes Very Good Condition yes Machine weight kg 500 Capacity m3 / h 1800 m3 / h Machining height mm 150 mm With noise suppression housing yes Other machines in the category Routers