Used Sand Worm for sale (2,474)

Condition: excellent (used), functionality: fully functional, Edge sander Minimax Unilev 150 Belt dimensions: 150 x 2170 mm Hjdjyqxutopfx Abvoni Two belt speeds Table adjustable from 0–30 degrees Adjustable sanding height Belt oscillation Motor power: 3.3/2.6 kW CE mark

Condition: excellent (used), functionality: fully functional, CALIBRATING SANDING machine model DMC TECHNOSAND TC 1350 RRP second hand machine CE standard : YES machine composed by 3 belts ( 3 independent motors ) 1° belt : Roller 2° belt : Roller 3° belt : electronic Sectioned Pad vacuum unit for table maximum working width mm. 1350 Hnsdpfx Ajyrrr Ujbvei volt. 380/50

Condition: used, Year of construction: 1997, functionality: limited functionality, - Oscillation defective - Main switch replaced Hjdeyi Ug Ajpfx Abvsni - Machine is operational - Sold without warranty

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom Hodpjwyda Ujfx Abveni electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: used, Year of construction: 1988, - Grinding width: 190 mm - Grinding height: 4 - 150 mm - 2 grinding units - Belt speed: 25 m/s - Feed speed: 5 - 25 m/min - Sanding belts: 1850 x 200 mm Hjdpfxsymnz Uo Abvjni - Electrical connection: 400 V, 3/N, 50 Hz - Ex stock

Condition: used, Year of construction: 2014, input voltage: 400 V, overall weight: 3,000 kg, input current: 71 A, We offer this used Boere Polishing Machine 500-3 polishing/sanding machine, year of manufacture 2014. Type: POLISHING / BRUSH SANDER Model: POLIJSTMACHINE 500-3 Hsdpfeybb Uwsx Abveni Serial number: 14047112 Year of manufacture: 2014 Voltage: 400 V Frequency: 50 Hz Rated current: 71 A Rated power: 36 kW Weight (approx.): 3,000 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Gear, gears, gear shaft, pinion shaft, spur gear, spur gear, hollow ground gear -Gear: spur gear with hollow ground 63 teeth -Shaft holder: inner Ø 40 x 45 mm -Dimensions: see photos -Dimensions total: Ø 134 x 60 mm -Weight: 1.8 kg Hnedpfx Aswzudgebvsi

Condition: used, Modular unit, finishing unit, sanding unit, sanding station, belt sander, belt sander, edge sander, edge sanding machine, profile sanding unit, small belt sander -comes from a Homag edge banding machine -swivelling -height adjustable -Max. Sanding belt width: 80 mm -oscillated -Sanding shoe: with air cushion -Drive: 1.1/1.4 kW -Speed: 1425/2850 rpm -Sanding shoe dimensions: L/W mm -Dimensions: 1000/1200/H1000 mm -Weight: 292 kg/piece Hjdpfx Aob Uhvlebveni

Condition: good (used), Aggregate kit, finishing unit, grinding unit, grinding station, belt sander, belt grinder, edge grinder, edge sander, profile sanding unit, small belt sander Hedpfx Abovzqc Hsvoni -Manufacturer: KED Kurt Ehemann, Homag, belt sanding unit from belt sander -Type: unfortunately no type designations -Roll: Ø 215 x 295 mm drum motor NG 45/2n 3 kW 2850 rpm -Roll: Ø 150 x 160 mm -Individual components: see photos -Transport dimensions: 830/690/H360 mm -Weight: 144 kg

Condition: used, Worm wheel and gear set, edge grinder, edge grinder, sander, drawer grinder, round bar grinder -a set consisting of: 1 worm wheel and 1 gear for oscillation -is a: Original Husband replacement part -for: Husband edge sander -various shapes: single-flight or two-flight available -several sentences: available Hodsd Nb Tdopfx Abvjni -Price: for 1 set -Weight per set: 1.4 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, grinding belt length: 2,600 mm, grinding belt width: 200 mm, grinding height: 200 mm, power: 2.85 kW (3.87 HP), Edge sander WEGOMA model KS2600/KS2600FU with oscillation. Feature Technical Data Sanding belt dimensions: 2600 x 200 mm Motor power (belt): approx. 2.25 kW Oscillation: electromechanical, can be switched off separately Oscillation motor: approx. 0.25 kW Belt speed: approx. 15 m/sec Hjdpfsyhglzox Abveni Main table size: 935 x 460 mm Auxiliary table: 350 x 300 mm (often at the belt tensioning roller) Swivel range: Aggregates adjustable via hand wheel (0° to 90°) Weight: approx. 260 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, Veneer sanding unit, 4 kW, 400 Volt, oscillation, chassis, motor power 2.2 kW, 4-roller feed, Haffner stepless feed, sanding belt 2640 x 150 mm, table 960 x 460 mm, swiveling range 45°-90°, 2 x 100 mm ø extraction ports, length 1800 x 1000 mm, weight 310 kg, good condition. Price ex works. Transport available at extra cost! Hnedpfx Asyayutebvsi

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 wide belt sander with combination unit Equipped with electronic segmented pressure bar For sanding of soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier boards Removal of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester coatings Sanding of blocking foils With graphical operator terminal NC-controlled thickness adjustment ranging from 3 to 150 mm Calibration roller can be engaged via terminal With patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency controlled, approx. 2–18 m/s Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min Belt blow-off: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/s Total power connection: approx. 17 kW Hnodpjx Rpghofx Abvji Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm Machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach

Condition: used, Used machine Year of manufacture: 1981 Features and technical data: Motor 5.2/7.5 kW, pole-changeable 750/1500 rpm Belt speeds: 11 and 22 m/sec With attached blower motor 2.2 kW (2840 rpm, air flow 2400 m³/h) Table size: 2900 x 1400 mm Usable working length: 2700 mm Table stroke: 320 mm Belt dimensions: 7800 x 150 mm Including pneumatic pressure shoe with belt brake Extraction nozzle: 180 mm Hodpfx Absx H U Nmsveni Air requirement: 2 l/min at 6 bar Weight: 1300 kg Availability: short notice Location: Röllbach

Year of construction: 1994, condition: used, Used machine Hedpfjxq Ua Rox Abvsni Year of manufacture: 1994 Equipment and technical specifications: Working width: 300 mm Sanding belt oscillation: mechanical Roller guide: rubber-coated Sanding unit: with sanding shoe Feed speed: 2-stage Feed direction: reversible (forward/reverse) Motor start: star-delta Power supply: 380 V Weight: approx. 450 kg Availability: short-term Location: Baden-Württemberg

Condition: good (used), Year of construction: 1997, We are offering this well-maintained Johannsen T94 edge belt sander, manufactured in 1997. Manufacturer: Johannsen Langbandschleifer Model: T94 Year of manufacture: 1997 If you have any questions or need further information, please feel free to send us a message or give us a call. Hjdjygvqqjpfx Abvoni

Condition: new, Year of construction: 2026, With dust extraction Automatic sanding belt centering Tool-free sanding belt change Sanding belt 2000 x 150 mm Surface grinding range 500 mm Belt speed 15/30 m/s Weight 120 kg Pole-changing motor 2.2/3.75 kW Extraction motor 0.37 kW Machine dimensions 950 x 430 x 1050 mm Scope of delivery: Incl. 60 grit sanding belt Dust bag Hnodpsckk Rijfx Abvsi DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 2004, condition: ready for operation (used), A 5-roller Heesemann wood sanding machine is available. Sanding belt dimensions: 2620 x 1350mm, sanding width: 1300mm, working height: 1000mm, roller diameter: 250mm, belt speed: 24m/s, suction volume: 89.5m³/min, suction nozzle diameter: 250mm + 180mm, air speed: 20m/s. Dimensions X/Y/Z: approx. 5200mm/2300mm/2300mm, weight: approx. 13000kg. Documentation available. On-site inspection is possible. Hnsdpfxot Amc Uo Abvji

Year of construction: 2016, condition: ready for operation (used), A Zionair sandblasting cabin is available. Cabin volume: 420l, internal dimensions X/Y/Z: 1200mm/600mm/580mm, max. workpiece weight: 40kg. Machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 125kg. An on site inspection is possible. Hedsxxzhqopfx Abveni

Year of construction: 1987, condition: ready for operation (used), Workpiece diameter: 10-350mm, max. grinding length: 660mm, clamping length: 1055mm, max. module: 25mm, swivel angle: +/-60°, grinding wheel dimensions: 300-500x100mm, with Faudi cooling lubricant belt filter and Elbaron oil mist separator. No longer fit for operation and can only be used as a basis for a complete overhaul. Hsdpfx Aorgah Hjbvsni

Year of construction: 1999, condition: ready for operation (used), Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible. Hjdew Duvhepfx Abvoni

Year of construction: 2013, condition: ready for operation (used), An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible. Hsdpfx Abexd Avteveni

Year of construction: 2000, condition: ready for operation (used), Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available. Hnjdjtk Rwtopfx Abvei

Condition: used, Unit 1: Oscillating sanding unit Unit 2: Top and bottom milling unit Unit 3: Profile sanding unit Workpiece height: 20-90 mm Hjdpfx Absyb Sdcsvsni Accessories: For edges R5 Edgebanding machine Rehnen type KBA for automatic processing and rounding of edges on wood and panel materials. The machine is suitable for precise sanding, deburring, and rounding of workpiece edges, ensuring consistently high surface quality. Ideal for joineries, furniture manufacturing, and industrial woodworking. Includes spare sanding belts and cutters.

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm Hedpfx Ajyb S Riebvoni max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.