Used Sandblaster for sale (330)

Year of construction: 2011, condition: used, Yuzey Koruma Sistemleri Pazarlama (Yuz-Kor) model Yuzkor CK1300, 1300mm Sandblast Machine. Serial no: EM.CK 1300.285 (2011) Location: These lots are located in Wellingborough, Northamptonshire, UK Tjdpfx As Afxlkjbued

Year of construction: 2023, operating hours: 400 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10948/11/23, For sale is a like-new MHG rotary table blasting system – an injector sandblasting system, type SMG 260 DTTA, for blasting components on a rotary table. The system was manufactured in 2022 and has only approximately 400 operating hours. Blasting was carried out exclusively with glass beads, resulting in minimal wear and tear, leaving the system in almost new condition. The blasting system has 3 blasting stations with a total of 8 automatic blasting nozzles. The injector blasting nozzles are flexibly lockable and adjustable, allowing them to be precisely aligned with different components (max. component height 350 mm). Loading is done via 2 airlocks with an automatic compressed air blow-off device. A side viewing window with an impact protection flap, 2 side doors, a safety light curtain, and a release mechanism ensure control and safety. The abrasive material storage container is equipped with a level indicator (MIN). The system is controlled via a Siemens SIMATIC HMI control system with a KTP700 display. A 30 m³ dust collector ensures the necessary vacuum and room air extraction; the system's power consumption is 6 kW. The system has already been partially disassembled and is ready for pickup. Manufacturer: MHG Strahlanlagen GmbH, Düsseldorf Type: Injector sandblasting system SMG 260 DTTA (rotary table blasting system) Year of manufacture: 2023 Operating hours: approx. 400 hours Condition: Almost new – blasted exclusively with glass beads, minimal wear Housing color: RAL 7021 Blasting stations: 3 blasting stations with a total of 8 automatic blasting nozzles Blasting nozzles: Injector blasting nozzles, flexibly lockable and adjustable Max. component height: 350 mm Tjdpfx Abo Adzhrsusd Airlocks: 2 airlocks with automatic compressed air blow-off device Viewing window: Side viewing window with impact protection flap Access: 2 side doors, safety light curtain, release mechanism Abrasive material container: With level indicator (MIN) Control system: Siemens SIMATIC HMI, KTP700 display Power consumption: 6 kW Dust collector: 30 m³ dust collector for vacuum and room air extraction Location: 35216 Biedenkopf

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) Todpfoz Eq Epex Abusd BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer a STEM continuous spray coating machine – CH 12x18.5/3W1E/MS/8x1T. Year of manufacture: 2019. Chamber dimensions: 1200 x 1850 mm. Tsdjz Dfzcspfx Abuod The equipment has 3 turbines.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Todpsz I Iv Rofx Abujd Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: excellent (used), Year of construction: 2022, total width: 640 mm, total length: 1,150 mm, total height: 670 mm, pressure: 10 bar, air demand: 72 m³/h, tank capacity: 40 l, overall weight: 72 kg, Selling a complete media blasting kit, including: - NOVGOM40 media blaster - Sieve for abrasives, 50 mesh - Double venturi nozzle, tungsten carbide, 6.5 mm diameter Tedpez Rw Rqofx Abusd - Nova3 helmet kit - Cable harness for blaster + 10 m extension cable - Cooler, ref. 2521

Condition: excellent (used), Year of construction: 2022, Matt HV 1216 suspended shot blasting machine. Two 11kW turbines. In very good condition, lightly used. Tsdpfjztkzijx Abujd

Condition: excellent (used), Year of construction: 2025, operating hours: 6 h, functionality: fully functional, Equipment: compressor, We are offering this very well-maintained Joke Microjet2 fine jet blasting machine, manufactured in 2025, including a maintenance-free compressor, also manufactured in 2025, and the dust collector for the blasting system. The blasting machine and compressor have a combined operating time of approximately 5-6 hours. The oil-free compressor is from Cleanair, and the dust collector is also from Joke. Todoz I Dyxjpfx Abuod If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, total width: 1,200 mm, total height: 2,100 mm, total length: 1,700 mm, overall weight: 310 kg, inner dimension width: 740 mm, inner dimension length: 1,000 mm, inner dimension height: 770 mm, Equipment: lighting, Auer ST 1000 J Blasting Cabinet / Blasting System – Year of Manufacture 2003 Technical Data: Manufacturer: Paul Auer GmbH Model: ST 1000 J Year of Manufacture: 2003 Machine Number: 3440 Blasting Chamber: approx. 1,000 × 770 × 740 mm External Dimensions: approx. 1,700 × 2,100 × 900 mm Load Capacity of Working Grate: 200 kg Blasting Gun: SPA 80 Tedpfx Abez Drfuoued Air Nozzle: 4.0 mm Blasting Nozzle: 11.0 mm Compressed Air Consumption: approx. 0.73 m³/min at 4 bar Electrical Power: 1.0 kW Weight: approx. 310 kg

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 18M0227, Shot blasting / sandblasting machine. Used for a short period, custom-made by NORDBLAST. The machine’s original purpose was to compact the aluminum from which bicycle rims are made and to create a rough surface texture, resulting in a homogeneous rim surface. Thanks to its nozzle-based application system, the machine is versatile and suitable for various applications. SIEMENS control system, filtration unit, etc. Tjdpfx Aszu Slrsbujd

Condition: used, Year of construction: 2019, Manufacturer: MHG, Type: SMG 160, Year of manufacture: 2019, Serial number: 9264, including stationary dust extraction unit, manufacturer: Eferest, Type 100 l, Serial number: 18-673-1-4, 12 bar, Year of manufacture: 2018, dust collector, Model 1703-2.2, air flow rate 1,800 m³, 2.2 kW, stainless steel container, 3 wheels, mobile, capacity approx. 100 l +++ ATTENTION: This item is part of an online auction! +++ Tjdpfsz Tqy Rox Abusd

Year of construction: 2015, condition: excellent (used), vertical automatic flat glass sand blasting machine with 4 air guns working height : 2000 mm OPEN TOP including air compressor and dryer . Tjdez Dt T Tepfx Abuod voltage : 230/400 V 50 Hz

Condition: used, Year of construction: 2015, Sandblasting system Sclick Schlick Surface Technology / Sandblasting systems Dimensions: 80 cm deep, 100 cm wide Tedpfx Abez Nhv Ujujd

Condition: used, Sandblaster GLASNER Working is OK Equipped with one filter Tjdpfoz Nycyox Abuod Voltage: 380 V Internal dimensions: Width 590 mm x Depth 470 mm x H 400 mm Width: 1000 mm Depth: 1500 mm Total height: 1800 mm Weight: approx 400 kg GLASNER Working is OK Equipped with one filter Voltage: 380 V Internal dimensions: Width 590 mm x Depth 470 mm x H 400 mm Width: 1000 mm Depth: 1500 mm Total height: 1800 mm Weight: approx 400 kg

Condition: excellent (used), Sandblaster Internal dimensions: Depth 550 mm x L 650 mm x H 600 mm Todpfsz Nyddjx Abued Sandblaster dimensions: L 800 mm x W 700 mm x H 1700 mm Vacuum cleaner dimensions: W 600 mm x Depth 500 mm x H 1500 mm 1 defective glove Machine IN VERY GOOD CONDITION Equipped with: Vacuum cleaner Voltage: 220 V mono

Year of construction: 2019, condition: excellent (used), functionality: fully functional, DESCRIPTION: The KCK-1000-FCP-UC30 pressure chamber is a versatile device with a wide range of applications. It enables the following types of work: - Cleaning the surfaces of metal objects, - Removing: welding residues, scale, rust, oxides, surface deposits, and old paint coatings, Todozvdfajpfx Abusd - Deburring the edges of objects, - Achieving the desired surface roughness. Technical data: - Width: 1470 mm - Depth: 1600 mm - Height: 2140 mm - Working chamber: 950 × 880 × 880 mm - Abrasive circulation: pressure-fed - Hand openings: 2 - Nozzle: boron carbide, ø 6 mm - Weight: approx. 300 kg - Lighting: fluorescent - Abrasive tank: 30 l - Air consumption: according to the manufacturer's table

Condition: ready for operation (used), Shot blasting system MHG SMG 45 K (negative pressure booth) -Work area: 1100x660x700 mm -Integrated dust extraction system -Two side doors / dust-tight sealing -System with double walls, sound-insulated and foam-filled -Blasting gun with nozzle -Operating pressure: 3 - 7 bar Todpfeztrk Eex Abued -On/off switch for lighting and dust extraction -Pressure regulator - Manometer - Foot switch -Viewing window -Documentation Dimensions: L x W x H 1.5 x 1.6 x 1.8 meters / Weight: 380 kg Subject to errors and omissions.

Condition: good (used), The system is open at the top. Blasting height: 1300 mm Width: approx. 1000 mm Tedpfx Ajxu Eycsbuod Height: approx. 2150 mm Depth: approx. 1400 mm Weight: approx. 1000 kg

Condition: good (used), Complete sandblasting system by Rösler, including manual blasting cabinet, blower, and extraction unit. Manufactured in 2010, in excellent technical condition. Dimensions: HxWxD approx. blasting cabinet 200 x 150 x 150 cm, weight 450 kg. Professional-grade equipment, which has been rarely used. Regularly maintained – in technically flawless condition. The machine can be inspected under power. Available from calendar week 22, 2026. Dismantling, removal, shipping, and reinstallation can be organized. If you have any questions, simply write or call: Maschinenhandel Nord, Gerstenstraße 2, 17034 Neubrandenburg All prices net plus 19% VAT. Subject to prior sale and errors. Tedpoyx El Nofx Abuod

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 950 mm, total length: 600 mm, total height: 1,850 mm, air demand: 0.9 m³/h, tank capacity: 250 l, input voltage: 230 V, overall weight: 180 kg, Equipment: cabin, lighting, XTON SANDBLASTER™ is a premium sandblasting and bead-blasting machine, ideal for workshops with limited workspace. The 250-liter pressure blast cabinet operates in a closed-circuit system and features a unique filtration system with an integrated dust collector. It is designed for exceptionally quiet operation, enhancing user comfort. The device is equipped with high-quality grain leather gloves, which are resistant to mechanical damage. The machine can also be painted in any color from the RAL palette. Additionally, an option is available for the unit to be made of stainless steel. EQUIPMENT: Tsdpfx Aerl R Dlsbued - Worktable measuring 80 x 55 x 60 cm - 250-liter chamber - LED lighting - High-quality gloves TECHNICAL SPECIFICATION: - Weight: 180 kg - External dimensions (W x D x H): 95 x 60 x 185 cm - Chamber dimensions (W x D x H): 88 x 55 x 60 cm - Chamber capacity: 250 L - Power supply voltage: 230 V / 50 Hz - Nominal working pressure: up to 10 bar - Cleaning efficiency: 25 m³/h - Cleaning grade: SA-3.0 – extensive and deep corrosion removal - Air requirement: 900 L/min - Maximum airflow: up to 12,500 L/min - Supported nozzle diameters: 2-15 mm - Nozzle material: tungsten carbide - Abrasive valve: MIKRO II - Viewing window dimensions: 270 x 510 mm - Worktable load capacity: up to 200 kg - Operating temperature: 10 - 50 °C - Construction: powder-coated steel, optional stainless steel

Condition: used, Year of construction: 1991, functionality: fully functional, For Sale – MICROPEEN Scale / Shot Blasting System MICROPEEN MPS 4-200-1S Overhead Rail Shot Blasting System / Scale Removal System with Filter Unit Description For sale is a used MICROPEEN overhead rail shot blasting system / scale removal system, including filter unit, control panel, and workpiece suspensions. This system is ideally suited for: - Scale removal - Cleaning - Rust removal - Surface treatment of steel components - Series and single part processing Workpieces are conveyed into the blasting cabin via an overhead rail system. An integrated extraction and filter unit is also part of the system. The machine comes from an industrial environment and is available immediately. Technical Data Manufacturer: MICROPEEN BENELUX B.V. Model: Sa Year of manufacture: 12/1991 Tjdey N Tbmjpfx Abuod Compressed air: 7 bar Voltage: 380/24 V System type: Overhead Rail Shot Blasting / Scale Removal System Equipment • Blasting cabin • Overhead rail system • Filter unit / extraction • Control panel • Pneumatic system • Workpiece carriers / hooks Condition • Used • Fully functional condition • Condition as shown in photos • Viewing by appointment possible • Immediately available Price €10,500 net negotiable Location Germany Search terms Shot blasting system, scale removal system, shot blasting machine, overhead rail shot blasting, sand blasting system, surface treatment, MICROPEEN, steel cleaning, shot peening Short version for platforms MICROPEEN MPS 4-200-1S Shot Blasting System Used overhead rail shot blasting system with filter system and control panel. - Year: 1991 - Compressed air: 7 bar - 380/24 V - Complete system - Immediately available Price: €10,500 net negotiable Ideal for descale and cleaning of steel components. Condition as shown in photos.

Condition: excellent (used), Year of construction: 2015, - Continuous flow, suspended part shot blasting system, specifically designed for automatic, continuous surface treatment of suspended workpieces. - Suitable for applications such as derusting, descaling, deburring, fine finishing, final shot blasting, or roughening. Tedpfx Abezvnnljuod - Flexible workpiece suspension. - Efficient blasting technology through high-performance turbines. - Automatic continuous operation. - System dimensions: 12.75 x 6.6 x 10.42 m (W x H x L). - Door opening dimensions: 2.0 x 2.0 m (W x H). - Workpiece dimensions: max. diameter 2,100 mm, max. height 2,100 mm, max. hook load 2,000 kg, max. part temperature 80 °C. - Abrasive: round F16-20. - High-performance turbines, type 3.6, quantity 06. - Impeller diameter 380 mm. - Blade width 55 mm. - Number of blades per turbine: 6. - Drive power per turbine: max. 11 kW.

Condition: used, Year of construction: 2017, Blast Cabinet with Extraction System Blast Cabinet: Manufacturer: SGT Strahlmaschinen AG Model: SX-100 / DK / 4P Extraction System: Manufacturer: Gläsner Plant No.: 5V 3028 055 Voltage: 400 V Frequency: 50 Hz Power: 2.2 kW The blast cabinet is sold together with the extraction system. Purchasing individual components separately is not possible. Inspection is available by appointment. Tedpfx Aeyddufjbued

Condition: used, Year of construction: 2017, functionality: fully functional, pressure: 10 bar, tank capacity: 200 l, overall weight: 113 kg, hose package length: 10,000 mm, Manufacturer: Szatkowski s.c. Type: OP-1/200 Year of manufacture: 2017 Factory number: 627 Working pressure: 14.3 bar Test pressure: 10 bar Capacity: 200 l Medium: air + abrasive material Maximum operating temperature: 50°C Minimum operating temperature: -10°C CE 1433 Tedpfx Ajz E D Drobujd Tank manufactured by PPU KOMNINO.

Condition: new, Year of construction: 2026, CORMAK KDMP400 Wet Sandblasting Cabinet The KDMP400 model has been designed for intensive industrial use. Its construction, made entirely of stainless steel, ensures high resistance to corrosion, moisture, and the abrasive effects of blasting media. As a result, the equipment maintains its durability and appearance even during prolonged operation in demanding conditions. The closed-loop water-abrasive circulation system produces a stable, homogeneous cleaning slurry, ensuring uniform surface treatment without the risk of overheating or damaging the workpiece. This process is particularly suitable for thin-walled components and parts requiring high-precision surface finishing. Key Advantages of the KDMP400 Blasting Cabinet - Dust-free sandblasting – eliminates airborne dust, allowing operation in enclosed spaces. - Stainless steel construction – provides maximum resistance to corrosion and humid environments. - High processing precision – ideal for components requiring accuracy and repeatability. - Safe operation – no sparking and reduced risk of surface damage. - Closed-loop abrasive circulation – reduces abrasive media consumption. - Improved visibility – the absence of airborne dust allows full control over the blasting process. - Versatile applications – suitable for processing a wide range of materials. Applications The KDMP400 wet sandblasting cabinet is widely used in various industrial and service sectors, including manufacturing, component refurbishment, and precision finishing. The equipment is suitable for: - Aluminium wheel rim blasting – effective removal of paint, surface deposits, and oxidation. - Cleaning injection moulds and production tools – precise removal of contaminants from moulds and tooling. - Surface preparation – preparing components for powder coating, anodizing, and electroplating. Tsdo Abak Tjpfx Abuod - Stainless steel and aluminium processing – cleaning and finishing metal components. - Glass, ceramic, and plastic blasting – suitable for surfaces requiring matting or smoothing. - Post-processing of 3D-printed parts – cleaning and finishing components after 3D printing. Design and Functionality The KDMP400 cabinet is manufactured from high-grade stainless steel, ensuring a long service life and resistance to water and abrasive media. The spacious working chamber allows comfortable handling of larger components, while the sealed construction prevents moisture and contaminants from escaping into the surrounding environment. The equipment features integrated working lights for improved operator comfort and an inspection window that provides clear visibility of the workpiece. Built-in protective gloves allow precise handling of components without direct contact with the blasting medium. The blasting process is controlled by a foot-operated valve, allowing the operator to use both hands while maintaining full control over the operation. The water-abrasive mixing system ensures consistent operating parameters and uniform surface cleaning. A compressed air supply is required for proper operation, as compressed air powers the blasting process. Technical Specifications Pump 550 W / 230 V / 50 Hz Pump capacity 230 l/min LED lighting 2 × 12 W Cabinet capacity 400 l Blasting medium volume 40–60 l Nozzle diameter Ø7 mm Operating pressure 4–8 bar Working area dimensions 900 × 600 × 800 mm