Used Hardwood Sawmill for sale (1,001)

Year of construction: 2001, condition: excellent (used), machine/vehicle number: R200 SE (R200 A.1), Complete Sawmill Log lengths: 2.4-6.5 m Log diameters: 8-35 cm Line speed: 75 m/min Capacity: 120,000 m³/shift Metal detector Hewsaw R200 SE with banana infeed Board separator 2x132 kW chipper heads left/right 2x110 kW 2x132 kW saw motor Ksdpfx Alsyyl Uys Nslu 2x37 kW edging unit

Condition: refurbished (used), A complete used sawline is available for sale. The first sawing stage includes an edger, and the second stage features profiling machines. All conveyors and components are included. The line will be fully refurbished mechanically; the electrical system is complete but sold as is. Please inquire for pricing and further details. Kjdpfxowa Nrps Al Njlu

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Kljdpfxsyxhq Uo Al Nou Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2016, functionality: fully functional, Timber sawing line with horizontal band saw and timber outfeed mechanisation, including control cabinets and hydraulic unit. The roller conveyors are each 11 metres long. The mobile band saw is set up stationary and axles, wheels, tow bar and mudguards are present. Comes with 12 associated saw blades. Available from mid-April/May Mobile saw Wimmer Zenz BN110, year of manufacture 2016, equipped as follows: Manufacturer: ZENZ Type: MOBILE SAW (MOBILSÄGE) Kjdpfsypat Ijx Al Njlu Model: BN 110 Equipment: Clearance: 110 x 130 cm Cutting width: 95 cm Cast iron wheels, 850 mm diameter Band saw blade width: 100 mm Drive motor: 22 kW Length: 11 m with drawbar Width 2.55 m, height 2.70 m Weight: 3,500 kg Vertical support: 5.00 Log turner: 1.00 Level adjustment with claws: 4.00 Log roller: 2.00 Pre-cutter: 1.00 Official operational permit for overrun brake: 1.00 SPS control Band saw blade 6000x100x1.1 mm stellite Water cooling with 20 l barrel 20 l barrel and nozzle mounted on the blade guide Chain turner: 2.00 Extension 3 m without support beam Chip collection box

Condition: reconditioned (used), Year of construction: 1996, Saw unit, manufacturer Linck, type KCS 6 Base frame with 4 saw spindle units Double spindle design with 6 adjustable saw heads Cutting height 325 mm, weight 12,400 kg Klodjzdiulopfx Al Nou The machine is currently being overhauled in our factory.

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Various Manitou rough-terrain forklifts. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Klodpfjzf Nbxjx Al Nju

Year of construction: 2008, condition: excellent (used), LBL Brenta Spanner CT 700 Max. cutting depth = 150 mm Max. cutting height = 650 mm 9 knives Kodpfx Alod Imuze Nolu Head and main body made of cast iron Free center disk, overheating protection Clearance = 800 mm Fast, precise positioning via servo motor with additional roller for forward and backward cutting

Condition: like new (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, 3-log deck, 6 cross-conveyors, log loading system, and more. The sawmill line is fully functional. The customer service has been recently updated. The line is still in operation and can be inspected at any time. The LT70 Remote is equipped with the largest hydraulic package and the SLP2 set for calculating cutting thickness. The price also includes approximately 100 saw blades (value approximately €3,000) for the LT70, 11 saw blades for the EG800 (value approximately €1,400), various spacer pieces for the EG800 (value approximately €1,300), and more. If you have any questions, please do not hesitate to contact me. Kjdpfx Aezd Nqdsl Nelu

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram Kljdpfx Aoyrdg Dol Neu - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Klodjyr I Dmepfx Al Nju

Year of construction: 1996, condition: excellent (used), functionality: fully functional, Möhringen roller conveyor system with integrated lifting and lowering transverse conveyor, featuring 5 chain strands. Hydraulically operated. Roller length: 2.0 m. Kledpfxjzc Hpco Al Nju Total length of roller conveyor: 11.2 m.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, cutting length (max.): 8,000 mm, overall weight: 14,000 kg, total length: 13,000 mm, year of last overhaul: 2026, saw band length: 9,045 mm, EXCELLENTLY MAINTAINED, FULLY REFURBISHED horizontal band saw WRAVOR WRC 1250 AC High-performance industrial saw with a 55 kW motor — for cutting logs with a diameter of 1250 mm Year of manufacture: 2018 Technical data: Kjdpszd Uifjfx Al Nolu • Main motor: 55 kW • Control: fixed control panel with PLC Unitronics V-280 • Option for manual adjustment of cutting thickness • Track (length): 12.5 m • Log clamps: 5 x hydraulic • Hydraulic cylinders: 5 x • Angle supports (90°): 5 x • Standard log turner: 4 x • Mechanical support: 3 x • Pre-cutter: 1 x • Output conveyor belt for transporting sawn timber The images are for illustrative purposes only.

Condition: new, Year of construction: 2026, THE LARGEST BANDSAW IN ITS CLASS – the high-performance industrial bandsaw Wravor WRC 1250 AC – robust, precise, and suitable for cutting large logs. Equipped with automatic control and advanced features for maximum efficiency! ✔ strong and stable construction ✔ high precision ✔ large cutting capacity ✔ automatic control ✔ reliable and robust design ✔ main wheels made of cast steel, double-bearing (EXTREMELY STABLE CONSTRUCTION!), wheel diameter: 1250 mm, width 135 mm ✔ saw blade length: 160/180 (DOUBLE-SIDED) L = 9045 mm ✔ motor power: 55kW – 110kW, frequency converter optional Saw width: approx. 4500 mm (depending on equipment) Track width: approx. 2300 mm (depending on equipment) Saw weight: approx. 23,500 kg (depending on equipment and chassis length) Maximum cutting width (between guides): 1300 mm Kedpfx Ajzd Ua Rsl Nslu

Condition: new, Year of construction: 2026, HEAVY-DUTY horizontal band saw WRC 1150 AC, featuring the best technology on the market and a robust construction. - Powerful and reliable performance - Complete hydraulic equipment Klodpszd T Nwjfx Al Nsu - SPS system supporting Industry 4.0 - Fast log turning and manipulation system on the saw bed - Fast up-down and forward-backward movements of the saw head - Precise and clean cutting results - Heavy-duty industrial construction - Easy operation (one operator manages the entire line) and efficient workflow, easy maintenance - Ideal for professional workshops and production use - Durable, accurate, and built for long-lasting performance

Condition: used, Year of construction: 2016, functionality: fully functional, cutting length (max.): 6,000 mm, wheel diameter: 1,000 mm, Horizontal Band Saw WRAVOR WRC 1000 Proffesional industrial saw with 30 kW motor — for cutting logs up to diameter Ø 950 mm Year of manufacture: 2016 Technical Specifications: • Main motor: 30 kW • Fixed command board on sawhead • Control: fixed control panel with Unitronics V-130 PLC • Manual adjustment of cutting thickness possible Kledpfx Aozd A Ivel Neu • Track length: 9,5 m • Hydraulic log clamps: 4 X • Hydraulic lifting / mechanical rollers: 2 X • Hydraulic angles (90°): 3 X • Standard log turner: 2 X • Outfeed silon conveyor belt for board transport

Condition: good (used), functionality: fully functional, High-performance band saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained, high-performance band saw Frame width: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Klsdpfx Aezfwl Eel Neu Hydraulic saw tensioner and saw chuck Drive motor and gearbox Electrical control cabinet with control system Splitting wedge, type AVER, with hydraulic drive In very good condition, (complete overhaul available upon request!) Excellent condition with remotely controlled clamping carriage and 1 band saw EWD LSH as well as one band saw EWD GDZGE 600 in stock!

Condition: excellent (used), Year of construction: 2010, The following components of a Linck VM50 saw line are available: Condition of the machines is very good! Infeed device ZV21, model EV 50 (in stock) Profiling chipper ZD31, model VM50, 2 × 200 kW (in stock) Outfeed device AV31, model VZM (in stock) Centering device VZ21, model VZV (in stock) Log rotator DV21, model DV70-2 (in stock) Kedszfwlfopfx Al Nolu Additional components: Infeed and centering device EVP – available from September 2026 Profiling chipper VM50, 2 × 200 kW – available from September 2026 Profiling aggregate VMP450 F61, 4 × 110 kW – available from September 2026

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Complete sawmill for pallet lumber production, consisting of: Individual sale of machine packages is also possible. 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory inlet measurement system, manufacturer Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter 20 - 90 cm. 2. Sawmill: Möhringer band saw, running band saw with Flexi Drive carriage. Splinter detection device. Log feeding with stepped singulation. Laser measurement system Bidac. Kallfass model trimming. Resawing: EWD Optimes with chipper PF 19 and double-blade saw NKU. Brodbaek edger. Stacking system for main product, empty pallet handling for main and side products. Kljdpfx Alsx T Azwe Neu Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electrical and electronic control cabinets, etc. Disposal. Detailed plans or a video can be sent upon request.

Condition: excellent (used), Year of construction: 1999, 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min Kjdoxtwwkjpfx Al Njlu 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: good (used), Ari Vislanda sawmill Kockums chippers + double profiling line Ksdjzdplzepfx Al Nslu capacity 75,000 m3 timber per shift. Only one operator required. Lisker control for Ari/Kockums line and edging line as well.

Condition: excellent (used), functionality: fully functional, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hard and soft wood Condition: Technically in excellent condition Included in the price: All machinery, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External loading and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year of manufacture: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: Chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk material • 5 m long discharge roller conveyor 2. Internal wood processing • E. Gillette Europe automatic log infeed  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller diameter: 1600 mm  - Capacity: Logs up to 1200 mm in diameter  - Belt width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel design with divisible opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edge milling machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / Width: 600 mm  - Automatic infeed and roller discharge 3. Shredding and removal • Vecoplan VTH 65/25/5/U Industrial Shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 Vibrating Table  - Surface: 650 × 2500 mm  - For even feeding to the shredder • Vecoplan KKF 500-1K-U Scraper Conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, and pellets 4. Automatic Cutting and Sorting • Kallfass RA4000R Automatic Cutting System (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC Multi-Blade Saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacers  - Max. log length: 2.5 m 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw grinder  - Saw blade diameter: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinder  - Grinding length: 400 mm / Width: 140 mm Klsdpfowh U Dmjx Al Nsu • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air flow: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, built in 1998 (2 fans) • Lysair fans – built in 1995 and 2020 • 2 cyclones with rotary valves • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be viewed in Belgium by appointment. All equipment is ready for operation and ready for immediate use. Ideal for industrial wood processing or as a complete investment. _____

Condition: used, A complete sawmill machinery package is being sold as follows. Sale as a complete package is preferred, but individual items or reservations are possible! 1. Log infeed system, 2-strand Conveyor length: 5.5m Width: 2.8m 2. Rail car/cross conveyor, driven 3-strand Length: 4.0m Width: 2.55m Track gauge: 1.85m 3. Tensioning car, Mayrhofer with auxiliary car Track gauge: 90cm 4. Circular sawmill, Möhringer Model: OSS75 Year of manufacture: 1991 Stroke: 500mm Kodpozb A R Hsfx Al Njlu Frame length: 750mm with drive motor with saw guide with saw blades with hydraulic saw tensioner with splitting wedge, Möhringer 5. Driven circular log transfer system Length: 9m Width: 1.4m Roller width: 1.2m 6. Spiral log transfer system Length: approx. 6m Width: 1.2m with lift for boards 7. Log transfer system Length: 14m Width: 1.1m Roller width: 0.85m with spiral log transfer system Length: approx. 7m Width: 1.1m Roller width: 0.85m 8. Cross conveyor, 4-strand Conveyor length: 2.3m Width: 4.2m 9. Double edger, Paul KME2 with cut-off saw with templates with saw blades with drive motor with sawdust extractor with length sorting 10. Cut-off saw, Stihl with rail car 11. Circular saw sharpening machine, Vollmer CABG 12. Circular saw tensioning machine, RIVO GSA 13. Circular saw sharpening machine, Vollmer CNE (2 units available) 14. Forklift, Manitou MSI 50, year of manufacture 2002 with accessories 15. Wheel loader, Manitou / Ahlmann AL85t, year of manufacture 2001 with accessories

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automated side board processing line with singulation, trimmer for cutting to length, 2 stacking machines, additional discharge, and cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: Ksdpey Uzhfefx Al Nolu - Cross transfer of boards with a 4-strand chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Aligning roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-cutting, 5000 mm into stacking machine 1, alternatively: without re-cutting, 4000 mm into stacking machine 1 with re-cutting, 4000 mm into stacking machine 2 with re-cutting, 3000 mm into stacking machine 2 with re-cutting, short lengths for discharge into a box with re-cutting, short lengths for discharge into a box with re-cutting, 2 or 3 x 101 cm for stacking slats with re-cutting, 2 or 3 x 101 cm for stacking slats or waste cut - cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of the finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, with side boards of 4000/17 x 76 mm, one employee produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipping system has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without problems.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, Woodmizer SLP line and extraction system with log turner infeed fully operational video shows complete line with crosscut. £80,000 plus VAT cost over £250,000 just for the sawline. Contact me for any futher information. Klsdsyub Ahopfx Al Nsu

Condition: good (used), Year of construction: 1996, functionality: fully functional, Complete Kara Master sawmill Year of construction 1996 CE mark The sawing line consists of Kjdpfxsum I S Es Al Nslu 2 Kara Master 08M sawing machines 1 Kara edger Technical data of the KARA MASTER machine Motor: 37kW / 1500 rpm Hydraulic unit: 5.5kW / 1500 rpm / 50 Hz Transfer table 9.5 m long, 0.7 m wide Weight, kg approx. 4900 kg Saw blade diameter 800-1200 mm (with undercarriage 800...1100 mm) Cutting height: 295...495 mm Recommended speed for the saw blade diameter 800mm 1300r/min 900mm 1170r/min 950mm 1100r/min 1000mm 1050 rpm 1100mm 960r/min 1200mm 880 rpm Diameter of the blade hole: 50 mm 015 mm, distance from blade hole 50 mm 9 m x 660 mm Additional equipment Pump: 34 l/min, 150 bar (blade shaft speed 1100 rpm) 180 bar from the tractor hydraulics (only in mobile) Stepless feed 0...130 m/min Kara Pro 200 control unit Programmable up to 120 sizes in steps of 0.1 mm. Programming addition during sawing, storage of the last dimension used. 9 Feed speed, m / min infinitely variable 0-130 m / min Kara Edger Type 32-250 Year of construction 1996