Used Saw Splitting Machine Spq300 for sale (66,731)

Condition: new, The TITAN 43/20 CD+E firewood processor with joystick control cuts logs with a maximum diameter of ø 43 cm using a harvester bar and splits them with a splitting force of 20 tons. This is a combination machine (electric and PTO connection). Demonstration and inspection by appointment possible – the machine is currently in stock and available immediately. Warehouse clearance – special price – interim sale reserved. Kjdpfxjtrmg Hj Abvedi

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Kodpfsv Dvfrox Abvodi Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: new, Year of construction: 2025, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Maximum log diameter 500 mm Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Kodpev Dvkzsfx Abvedi Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Kdedpsv Dvhyofx Abvsi Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: excellent (used), Machines belonging to the LINE (Ref. SOFIT code : YZ0900) Splitting Saw Machine (used to split in two parts the unique workpiece-panel) Minimum length of the workpiece: mm 250 (ca.) Maximum length of the workpiece: mm 3000 (ca.) Minimum width of the splitted workpieces: mm 120+120 (ca.) Maximum width of the splitted workpieces: mm 600+600 (ca.) Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) Max forward speed: m/min 60 Kedpfx Ajf N Ngbobvodi Along with the following groups: Lower Scoring Unit (power KW 3) max saw diameter mm 350 Upper Bevel Trimming Unit (power KW 3) max diameter mm 300 Main Sawing Unit (power KW 11) max diameter mm 450

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts the unique panel): - Minimum length of the workpiece: mm 500 - Maximum length of the workpiece: mm 2700 - Minimum width of the workpiece: mm 300 ca. - Maximum width of the workpiece: mm 700 Kodpfx Abju Tqb Ujvodi - Thickness (min./max) of the workpiece: mm 10 / 30 ca. - Max feeding speed: m/min 50 - Total installed power Kw 43.2 Along with the following groups: POS. 1 Milling unit for execution of bottom slots/grooves (Kw 7,4) max. blade diameter mm 300 POS. 2 Lower scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 3 Upper scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 4 Lower main blade (sawing) unit (Kw 7.4) max. diameter mm 350

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 3115, functionality: fully functional, empty load weight: 2,000 kg, feed length X-axis: 2,000 mm, saw band length: 4,870 mm, saw band width: 32 mm, TECHNICAL DETAILS Bandsaw blade length: 4,870 mm Bandsaw blade width: 32 mm Bandsaw blade speed: 110 m/min Cutting capacity (round): 340 mm Max. feed length: 2,000 mm MACHINE DETAILS Control: Conventional Saw type: Automatic Horizontal/Vertical: Horizontal Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,850 x 1,800 mm Kdedpjyuaz Nefx Abvji Net weight: 2,000 kg Transport packages: 3

Condition: ready for operation (used), empty load weight: 6,000 kg, nominal power: 13.41 kW (18.23 HP), De DoALL C-650 constructiezaag met dubbele kolom en 45/45 graden zwenkfunctie is ontworpen om snel en nauwkeurig ronde, vierkante, buisvormige of constructieprofielen van elk materiaal te zagen. De machine is voorzien van een krachtige 10 pk motor en een 2 inch bandzaagblad met een spanning van 30.000 psi voor nauwkeurige zaagsneden met optimale snelheid in alle materialen, van gewoon koolstofstaal tot exotische legeringen. Geharde en geslepen, verchroomde kolommen met Teflon- en bronzen bussen garanderen nauwkeurig zagen en een lange levensduur. De machinebasis kan 45 graden naar links en 45 graden naar rechts zwenken voor nauwkeurige versteksneden. Ronde dop: 660 mm Rechthoekige dop 90°: 1000 x 660 mm Rechthoekige dop +45°/-45°: 560 x 660 mm 12 meter gemotoriseerde CNC-aanvoertafel 10,5 meter gemotoriseerde uitvoertafel Functies: Geharde, geslepen en gepolijste kolommen Teflon- en bronzen bussen Bandonderbrekingslimietschakelaar 3 graden kanteling van het hoofd Buitenboord bankschroef Hydraulische bandspanning Elektrisch aangedreven bandborstel Hydraulisch aangedreven, spelingvrije zaaggeleiders met hardmetalen afwerking. Handmatige en semi-automatische snijcycli Servogestuurde constante toevoerdruk Hydraulisch aangedreven geleidingsarm Max height of workpiece: 660 mm Sawspeed: 12 > 110 m/min Kdodpeyuz Dfefx Abvei Length of band saw: 8636 mm

Condition: used, total height: 2,500 mm, total length: 1,500 mm, total width: 2,450 mm, Weight: 3.000 kg Price: On request Kdsdsyu Sgkjpfx Abvji - Documentation available: No - CE certificate present: No - Serial number: AB670 - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1050 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 330 - Max. cutting width to column [mm]: 600 - Max. total opening [mm]: 570 - Max. cutting height [mm]: 500 - Table width [mm]: 1150 - Table length [mm]: 1100 - Max. band saw width [mm]: 90 - Extraction port diameter [mm]: 150 - Options: Tiltable fence - Transport dimensions: 1500mm x 2450mm x 2500mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Een enkelkops, incrementeel mesaangedreven dwarszaagmachine voor het zagen van grote secties, ontworpen voor 90°-sneden. Een belangrijk kenmerk van dit product is de optimale snijkwaliteit, gecombineerd met herhaalbaarheid en nauwkeurigheid. De mesaanvoer is pneumatisch. 2 verticale pneumatische klemmen 2 horizontale pneumatische klemmen Kdodpfx Absyq Tv Esvji Voorbeelden van snijtechnieken: - 600 x 30 mm (maximale breedte van het werkstuk) - 90 x 250 mm (maximale werkstukhoogte) - 300 x 210 mm - 500 x 130 mm - diameter 250 mm Dia saw / abrasive - disk: 650 mm Turningspeeds: 2800 rpm Power needed / motorpower: 5,5 kW

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Price: On request - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: At10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport packages [pcs.]: 1 Financial information Kdjdpfxsyrpmco Abvoi VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), total height: 3,340 mm, total length: 4,500 mm, total width: 1,950 mm, throat depth: 660 mm, Type: ONL 660x700 ACN Heavy duty double column bandsaw specific for high-alloy steels CNC touch control with saw parameters for various types of high-alloy steels cap round: dia 660 mm cap square: 660 x 700 mm bundle cap: 555 x 700 mm autofeed with stroke of 500 mm (with unlimited repositioning) sawing power: 18,5 kW the in-feed and sawing speeds are frecquency controlled enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 10,3 meter in-feed rollerconveyor (outside) with 2 hydraulic clamps for aligning workpiece - 9 meter in-feed rollerconveyor (inside) with 2 hydraulic clamps for aligning workpiece - max workpiece width: 900 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor: one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 700 mm Sawspeed: 10 > 120 m/min Length of band saw: 8660 x 67 x 1,6 mm Kdsdpfx Abjygywuevoi Power needed: 27 kW (58 amp) Weight: 8,5 ton (only machine)

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: Kdedpsv Sfp Aefx Abvoi - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), throat depth: 400 mm, Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Kdedsxpymajpfx Abvji Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: ready for operation (used), total height: 1,400 mm, total length: 2,300 mm, total width: 2,300 mm, empty load weight: 2,000 kg, nominal power: 5 kW (6.80 HP), throat depth: 260 mm, cap round: dia 260 mm cap square: 260 x 260 mm Kdsdexqr Urspfx Abvoi Max height of workpiece: 260 mm Sawspeed: 17 > 120 m/min Length of band saw: 4100 x 32 x 1,1 mm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 150 mm, warranty duration: 6 months, Equipment: rotational speed infinitely variable, Kaltenbach KKS 450E – very neat used machine from 2018 with 6 months warranty. Extra options: * Micro-dosing system & wet cooling * Horizontal (hydraulic) clamping cylinder 1 x The KKS 450E is a semi-automatic mitre saw for ferrous and non-ferrous metals such as: steel, stainless steel, chrome steel, brass, copper, bronze, etc. Benefits at a glance: - Clamping, sawing, reversing and releasing – all with a single lever - Saw height adjustable via a lever - User-friendly mechanical controls mounted directly on the machine - Excellent accessibility for saw blade changes and maintenance - Workpiece clamping device on both sides of the saw blade - Two cutting speeds for virtually all applications - Ergonomically positioned controls for user comfort Ksdpfxoyr S Szo Abvsdi - Adjustable sawing stroke limitation and rapid saw blade return All pre-owned Kaltenbach machines are supplied with a 6-month warranty as standard. Transport and installation available throughout the Benelux.

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - Kdodpfxeu R Sy Ns Abvoi pivoting, rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Kedpfx Abju R S Dhevjdi Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -

Condition: used, total height: 2,980 mm, total length: 2,000 mm, total width: 1,600 mm, Weight: 2.000 kg Price: On request - Documentation available: No - CE certificate present: No - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1220 - Max. cutting to feed roller opening [mm]: 210 - Max. cutting to stop opening [mm]: 390 - Max. cutting width to column [mm]: 650 - Max. total opening [mm]: 600 - Max. cutting height [mm]: 380 - Table width [mm]: 1150 - Table length [mm]: 1200 - Max. band saw width [mm]: 120 - Extraction port diameter [mm]: 250 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 45 - Fuse [A]: 63 - Power [kW]: 25.0 - Transport dimensions: 2000mm x 1600mm x 2980mm (l x w x h) Kdsdpfx Ajyna Dwobvei - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Price: On request - Details: - └ Description: Shaft of the drive rollers is loose with the machine Kjdpfx Absym Rt Hovedi - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: AT10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, 1 used band saw automatic machine Manufacturer: Berg & Schmid Model: X Tech 410 Technical specifications: - Cutting range: round 410 mm or flat 410 x 410 mm - Modern 2-axis CNC control - Band run monitoring with automatic feed adjustment - Automatic cut-in for the first cut, minimum remnant length 15 mm - Infinitely variable, frequency-controlled saw drive - Clamping pressure regulation for thin-walled tubes and profiles - Hydraulically driven chip conveyor - Automatic double-sided saw band lift-off device - Hydraulic saw band tensioning - Material feed via precision ball screw and linear guide Drive power: 5.5 kW Working height: 730 mm Kdsdpfeytvqqex Abvei Paint finish: platinum grey RAL 7036 and turquoise RAL 5018

Condition: used, Year of construction: 2001, saw blade diameter 350 mm 190 mm speeds 15 / 30 / 45 / 90 U/min Kjdpfx Abjyvvpmsvsdi power requirement 1,8 / 2,6 kW kW

Condition: used, Year of construction: 1995, machine/vehicle number: 795101, Offer 26032 Hydraulic Twin-Column Guided Mitre Band Saw Automatic Machine Technical Data: - Cutting capacity at 90° – round: 310 mm - flat: 520 x 310 mm - Mitre adjustment to the left up to 30° - Cutting capacity up to 45° – round: 340 mm - flat: 350 x 310 mm - Cutting capacity up to 30° – flat: 230 x 310 mm - Saw blade dimensions approx. 5000 x 41 x 1.3 mm - Cutting speed: 17 – 120 m/min - Infinitely variable cutting pressure: 0 – 10 m/min - Automatic material feed Kdjdpfx Aboyv D Idjvei - Total drive power approx. 400 V / 6.0 kW - Micro-spray coolant system - 2 x roller conveyors, each 2000 mm - Space requirement approx. W 3500 x H 1800 x D 1600 mm - Weight approx. 2000 kg

Condition: new, saw blade diameter 550 mm Number of revolutions 3580 r.p.m hole of sawblade 32 mm Control NC total power requirement 3 kW weight of the machine ca. 250 kg required space 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Schnittbereich 90° rund: 155 mm Schnittbereich 90° quadratisch: 155 x 155 mm Schnittbereich 90° rechteckig: 260 x 200 mm Schnittbereich 45° rund: 130 mm Schnittbereich 45° quadratisch: 130 x 130 mm Schnittbereich 45° rechteckig: 180 x 200 mm Standard Accessories - Location points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles Kedpfx Aoymf Tbsbvjdi - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: used, 1 pc. BEHRINGER HBP360A automatic bandsaw with roller conveyor, as per images and inspection. Condition: used Kedsyr H Hmopfx Abvjdi Storage location: material warehouse Payment method: advance payment by bank transfer Shipping: Collection only – shipping is not offered for this item!