Used Sawdust Stoves for sale (243)

Condition: refurbished (used), functionality: fully functional, Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt Factory-refurbished and inspected (used) with new rubber steep-incline conveyor belt and new carrying rollers Lightweight frame construction made of steel Belt width: 500 mm Axle distance (A-A): 10,000 mm Conveying capacity: approx. 30–40 m³/h (at 0° incline) Drive: Drum motor, used Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tension drum: Drum diameter 160 mm with spindle tensioning station Belt: Rubber steep-incline conveyor belt EP 250/2 2:1 with V-profile (15 mm) Machine weight: approx. 800 kg Machine color: freshly repainted Incl. infeed hopper (charging hopper) Lodpjxz Tg Dsfx Ah Ujhr Suitable for, amongst others, the following bulk materials: Wood chips, sawdust and wood shavings, biomass, wood pellets, charcoal, waste wood, bark, earth, compost, recycling material, trimmings, and much more. Accessories (optional): Internal belt scraper, chassis, tow bar, steel support, electrical installation (plug switch 16 A) Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt | Bulk Material Conveyor | Belt Conveyor | Inclined Belt Conveyor

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Lhjdpfx Ajfmqq Esh Uer Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: used, Year of construction: 2024, color: grey-black, empty load weight: 3 kg, first registration: 06/2024, fuel type: gasoline, gearing type: mechanical, TITLE: USED ROLL-OFF CONTAINER WITH FIXED ROOF FOR SAWDUST AND SINGLE REAR DOOR WITH SIDE INSPECTION PORTS AND VIEWING WINDOWS REF: 24-U-102 TYPE: Sawdust NEW: No LID: Yes OPENING: Single door DIMENSIONS Lsdpetyqxijfx Ah Uohr TOTAL LENGTH: 6.20 m OUTER BOX WIDTH: 2.50 m HEIGHT: 2.35 m CAPACITY: 36 m³ WEIGHT: 3,610 kg FLOOR: 5 mm WALLS: 4 mm COLOUR: Blue Prices shown do not include VAT. Please contact our sales team for up-to-date pricing and terms. For more information: Loris: 3484773001 URL: #thespecialistsinrolloff AURORA ROLL-OFFS operates in the purchase and sale of industrial and commercial vehicles, specialising mainly in the waste sector. Experts in trucks, trailers, and roll-off equipment. We offer a fleet ready for immediate delivery with over 50 trucks and more than 150 bins and roll-off containers, with and without cranes. E.&O.E. Given the number of listings and details provided, Aurora advises customers to verify the accuracy of the information with our sales team.

Condition: used, This listing is for the Carbolite PF30 Oven The unit is in full working condition and is ready for immediate use Summary The Carbolite PF30 is a versatile, reliable 28 L benchtop oven, offering: Fast and even heating up to 300 °C Excellent stability and temperature control A durable design with flexible configuration options Safety and efficiency suitable for a range of laboratory and industrial uses Ledpfxoxhfnyj Ah Ujhr Standard Features Fan‑convection design ensures faster warming, uniform temperature distribution, and quicker recovery than natural convection models. R38 digital PID controller offers precise, stable control for models PF30 through PF200. Chemically resistant stainless steel liner for durability. Lever-latch door with an airtight silicone seal, minimizing heat loss and improving efficiency. Meets safety standard BS EN 61010‑2‑010:2003 for lab equipment safety compliance. Customizable Options (Specify When Ordering) Over‑temperature protection, ideal for protecting samples during lengthy unattended runs. Advanced digital controllers: Programmable or segment-style controllers with RS‑232/485 or Ethernet connectivity. Thermocouple ports, cable entry, lockable doors, stacking frames, door‑isolating switches, viewing windows, interior lighting, air exhaust fans, moisture extraction, etc. Stoving & curing option, designed for solvent removal—includes exhaust fan and safety vent panel (not compatible with viewing window). Low-voltage variants, floor stands (fixed or castor-mounted), routine spares kits, reinforced shelves, and more.

Condition: new, Year of construction: 2025, functionality: fully functional, FM300 extractor is a simple machine for extracting chips and sawdust. Capability of quick bag replacement and portability due to the wheeled base make our extractor very practical. Additionally, absorber's metal rotor ensures quiet operation. Despite providing such great features as failure-free operation and high efficiency, it is very affordable. Metal balanced rotor ensures vibration-free and quiet operation Quickly mounted BURLAP extraction bag 4-wheeled base makes it portable Stable, metal construction Default equipment Y-shaped extracting connector, 2×100 Metal wheeled base Technical data Lhsdpfxovu Atwj Ah Ujr Suction efficiency 2530 m3/h Engine speed 2850 rpm Bag capacity 150 L Number of bags 2 Extracting connector diameter 1×130, 2×100 mm Dimensions (L×W×H) 940×510×1960 mm Weight 56 kg Motor power 1.5 kW Power supply 3-phased, 400V EC declaration yes

Condition: new, Year of construction: 2025, functionality: fully functional, As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our site in 47669 Wachtendonk, we turn your individual requirements into reality and produce your desired concept. Thanks to our in-house production for almost all components, we are flexible and can respond specifically to your requirements. We not only provide you with your ideal powder coating system - we are also on hand with comprehensive user expertise to support you in all matters relating to surface technology. Every item offered here is manufactured especially for you. Whether large or small projects - we supply complete systems from a single source, tailored to your requirements. We look forward to hearing from you and implementing your ideas together! Example: KM Pro KM Pro electric chamber oven Heating type electric Air circulation Heating capacity 30kW Circulating air motor 3kW Insulated up to 250°C Connected load 380-400V, 34kW Lhedpotxcpwsfx Ah Ujr Floor insulation 100mm Insulation walls 150mm (highly compressed) External dimensions : 3400mm (L) x 1800mm (W) x 2550 (H) without fan motor on top and switch cabinet on the side Working dimension (inside) 3100mm (L) x 1200mm (W) x 1880m (H) Height due to the low-lying rails ≠ 2000mm Equipment - Double-wing door, incl. door bolt and handle - Adjustable air slats (optimum air circulation regulation) - 2 pcs. Heating coil - 2 PT 100 temperature sensors (top and bottom) - Exhaust air throttle flap, manual adjustment (exhaust air regulation) - 2 rails on the oven ceiling - Walls made of galvanized sheet steel Control system : - Rittal control cabinet - Hitachi panel 7 inch (touch operation) - Control via Hitachi PLC - Speed control of the air circulation motor via frequency converter, with braking resistor - Emergency off - Adjustable control power of the heating coil (if current peaks are reached, you can regulate the oven down) - GELLING function for stoving different colors in one oven (air circulation motor is throttled over a period of time) - OPEN-DOOR function regulates the air circulation downwards when the door is opened. So you have less heat loss - Traffic light to indicate the respective status. - STAY-HOME-WARM-UP is a time-controlled switch-on of the oven. This allows you to start the oven before starting work. - SEE-TEMP shows the temperature curve of the oven. This allows you to check the temperature. - GO-HOME-LEAN-BACK switches the oven off via a time control.

Condition: used, functionality: fully functional, 2-burner gas stove from warehouse clearance. Can be shipped by freight forwarder. Lhsdoxz Tt Depfx Ah Usr

Condition: good (used), Refurbished machine Basic machine starts at a price of 147.700 € net *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System Lhjdpfx Aho E Dquo Uer 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Year of construction: 2014, condition: like new (used), WALTER TD500 KBA Sawmill Lhjdpfx Ahsmv Ekye Ujr - user manual - CE certificate – after technical review - very good condition – year of manufacture 2014 - feeding table standard 3m + 3m additionally = 6m TECHNICAL PARAMETERS: main engine 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls disc diameter 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor three pickup rollers spigot diameter 2 x 200 mm dimensions L/W/H 300 x 245 x 180 cm weight ~ 3000 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, functionality: fully functional, year of last overhaul: 2024, protection type (IP code): IP54, Briquetting Press RUF 400 COMPLETE BRIQUETTING LINE AVAILABLE FOR PURCHASE: Drum sawdust dryer Feed auger Belt conveyor – 2 pcs Separator with hopper Screw conveyor – 6 pcs Wet sawdust storage bin Fuel storage bin Wood waste boiler Wood waste crusher Extraction fan with cyclone Packing machine with compressor Additional photos and information available upon serious inquiry. Ledpfsxu Ryujx Ah Uehr

Condition: good (used), Lohberger Stove Oven Water Bath Brainmarie Salamander Water Bath E.WS09EBM2.1 (2.3 kW) 4-Burner Stove E-4/850 (17 kW) 2-Burner Stove E-2/850 (6.8 kW) Oven eloma SA1 Salamander (2.1 kW) Faucet Dimensions: Width: 2250 mm Depth: 850 mm Lodpexqyfxsfx Ah Ushr Height: 750 mm Backsplash: 60 mm Hotplates: 300 x 300 mm Water Bath: 510 x 610 210 mm Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2022, operating hours: 2,113 h, condition: excellent (used), functionality: fully functional, Drum dryer Agromech M-829 with a chip-feeding stoker for the furnace. The drum dryer is equipped with a coal furnace adapted for burning wood waste or sawdust briquettes. The entire drying process, as well as the regulation and control of the drying air temperature, is semi-automatic and carried out by the dryer operator. THE DRYER IS BUILT FROM THE FOLLOWING MAIN COMPONENTS: * Coal furnace with thermal insulation, adapted for burning sawdust briquettes and wood waste * Wet sawdust feeder – chain-slat type, pit-installed, smoothly controlled by an electric inverter with a system for smooth dosing of the material to be dried * Insulated loading connector * Thermally insulated drying drum, length 9.00 m * Discharge chamber for dry material * Main dedusting cyclone with feeder * Main radial fan * Electrical control cabinet with temperature measurement and control instrumentation * Inclined screw conveyor for discharging dry material TECHNICAL CHARACTERISTICS: 1. Nominal capacity of the dryer at initial sawdust moisture 40–45% and final 15% – 1,000 kg/h 2. Amount of evaporated water – 1,100 kg/h 3. Maximum thermal power of the solid-fuel furnace – 1,000 kW 4. Maximum temperature of drying air at the drum inlet – 600–650°C 5. Average fuel consumption: * Hard coal or fuel with similar calorific value: 200 kg/h * High-calorific sawdust briquettes: 250–300 kg/h * Wood chips with moisture up to 35%: 250–350 kg/h Lhedpfx Aexzup Tjh Ujr 6. Total installed electrical power – 17 kW 7. Total weight of the dryer with refractory insulation – 16,500 kg The dryer was manufactured, assembled, and commissioned in November 2022. Operating hours: 2 113

Condition: excellent (used), Year of construction: 2010, operating hours: 4,150 h, functionality: fully functional, machine/vehicle number: T8/049, overall weight: 4,300 kg, For sale: Briquetting press for the production of briquettes from sawdust Wropol Bison III Speedy 500 Serial number: T8/049 Lhsdjx H T Easpfx Ah Usr Year of manufacture: 2010 Technical specifications: • Motor: 30 kW • Throughput: approx. 500 kg/h (depending on raw material) • Operating hours: 4,150 mth Technical condition: • Machine is fully operational and in continuous use • Prepared for continuous operation • Hydraulic oil changed – July 2025 • No play, press runs smoothly Briquette dimensions (RUF-type block): • Height: 100 mm • Width: 65 mm • Length: approx. 120 mm (adjustable) Possibility to start and test the machine on site.

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Lhedpoff Sbiefx Ah Uer Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: new, Year of construction: 2025, Industrial Dust Extractor DCV5200E+ – Maximum Performance in a Compact Design The professional industrial dust extractor DCV5200E+ is designed for the most demanding work environments. This high-efficiency unit is intended for removing sawdust, dust, and chips from woodworking machines, ensuring consistent extraction performance throughout the entire production cycle. Thanks to its compact design and strong suction power, the central dust extractor works perfectly both as a standalone machine and as a part of a multi-point extraction system. Ledpfx Ajx Hh Iijh Ujhr Key Advantages of the Machine Automatic filter-shaking system – ensures uninterrupted performance without the need for manual maintenance. Stable, hardened construction – eliminates vibrations and noise, ensuring long-lasting durability. Dynamically balanced metal impeller – quiet operation and failure-free performance in continuous use. 200 mm suction port – optimized airflow and increased extraction efficiency. 18 polyester filters – effective filtration of particles down to 5 microns, with optional HEPA filters available. Hermetically sealed plastic containers – quick replacement and 99.99% system tightness. Construction and Technology The DCV5200E+ is based on a proven, modular design with high rigidity and resistance to deformation. Thanks to the high tightness of the suction system, the machine efficiently extracts air without energy loss – which is especially important during the heating season. The fan blades feature optimized geometry, ensuring low energy consumption while maintaining maximum airflow efficiency. Precision and Work Efficiency The 3 kW three-phase motor delivers up to 5200 m³/h capacity and a suction speed of 30 m/s. This configuration allows several woodworking machines to be connected simultaneously without a drop in efficiency. It is ideal as a central extractor in high-dust production lines. Applications The DCV5200E+ dust extractor is intended for professional use in woodworking shops, furniture factories, and CNC production lines. It works effectively with: panel and sliding table saws, sanders and edgebanders, band saws and table saws, milling machines and thicknessers. Standard Equipment 18 polyester filters (5 microns) metal impeller and impeller housing hermetically sealed plastic containers integrated filter cleaning system Optional Equipment HEPA filter for particles below 1 micron extraction hoses and system connectors fill-level sensors Technical Specifications Parameter Value Motor power S1 3 kW / 400 V, 50 Hz Motor speed 3000 rpm Extraction capacity 5200 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 200 mm Suction speed 30 m/s Number of filters 18 Filter material Polyester (5 microns) Filter surface area 10 m² Dimensions (L × W × H) 2441 × 940 × 2270 mm Weight 260 kg

Condition: used, Year of construction: 2014, functionality: fully functional, For sell a TOS Svitavy PWR 412 double-shaft multiblade saw with automatic vacum feeder and centering, manufactured in 2014. Includes: - PWR 412 multiblade saw - scissor table - roller infeed with automatic feeder and centering device - roller outfeed table - sawdust conveyor - control panels and control cabinet - several sets of saw blades - 112 used and 20 new Main machine points of specification: Saw shaft electric motor power: 2 x 90 kW Maximum blade diameter: 350 mm Maximum material height: 200 mm Maximum distance between horizontal blades: 400 mm Feeder speed: adjustable from 4 to 40 m/min Pneumatic and spring-loaded pressure mechanism Laser-guided sawn timber Saw shaft speed: 3800 rpm All technical parameters given in the last photos Very good condition, the machine has not been used from 2 years. It is connected to the power supply at the time of listing. Price net, VAT invoice included. Lsdox Hfvqopfx Ah Uehr Disassembly and transport are the responsibility of the buyer.

Condition: used, Year of construction: 2009, heating capacity: 400 kW (543.85 HP), We offer a biomass boiler from the renowned company Kohlbach. Biomass boiler 400 kW TYPE K 8 – 400 Biomass boiler for bark, wood chips, and sawdust. Complete pump and valve set. Multicyclone Fuel feed Heat exchanger from 2009 Lodsx Daw Uepfx Ah Ushr Optional and available at extra cost: Biomass boiler with movable floor and hydraulic pump

Condition: used, Technical details: width: Ø 110 mm depth: ca. 140 mm degree: 1200 °C voltage: 220 V total power requirement: 750 Watt dimension machine xH: 400 x 220 x 320 mm Ljdpfx Ahou N Agwj Uehr on sale as is! inner lining with Shamrock, shamrook has slightly cracks. i.D. *

Condition: excellent (used), Year of construction: 1992, wood stove biocenter large capacity Good condition Lodpfxjxnryps Ah Uohr

Condition: new, Year of construction: 2025, Firing chamber output: 34 kW Working power: 29 kW New appliance, original packaging: Yes Lsdpfx Aopkwhqjh Ushr Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 180 mm with 2 freely rotatable plug-in bends Intake filter / supply air filter: large-surface supply air filter without power loss / included Smoke outlet diameter: 160 mm Firebox length: 500 mm Firebox width: 400 mm Firebox height: 590 mm Air flow : 2200 m³/h Power consumption: 400W designed for room volume: 500 m³ Area to be heated: 100/150 m² Stove height without hot air conveying pipes: 1560 mm Oven width: 550 mm Oven length without flue gas fan: 920 mm Weight: 200 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, For sale: Automatic pressed wood block production line, including: 1. Four double block presses with 4 outlets (3 presses produce 75 mm x 75 mm blocks and 1 press produces 95 mm x 95 mm blocks; length adjustable as needed). Presses are suitable for producing blocks from wood shavings or sawdust. Mixture ratio: 85% raw material and 15% glue. Approximately 17 m³ of finished product is produced in 24 hours. Lhsdpfsx E Rddex Ah Usr 2. Two automatic glue and sawdust mixers. 3. Automatic raw material transport system: two lifting conveyors and two transport stands with trolley.

Condition: good (used), Year of construction: 1998, functionality: fully functional, power: 400 kW (543.85 HP), Equipment: type plate available, We are selling our 400 Kw boiler. We used it to supply our drying chambers with heat. As we no longer have these, the boiler is no longer necessary for us. The boiler also includes - Moving floor - Entry - Boiler Ljdpfx Ahsq U R Sgo Uehr - Ash conveyor including container - Various pipework - Heating control Price is exclusive of 20% VAT, ex works, exclusive of dismantling, loading, contract preparation and customs clearance costs. The stove can of course be inspected by appointment. As heat acceptance is no longer possible, firing/demonstration is also no longer possible. Due to the construction of the building, it will probably only be possible to remove the boiler via the roof. The boiler was checked by a specialist company on June 05, 2024! The boiler is ready for use and fully functional.

Condition: not inspected (used), Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 13189, VERTICAL PANEL SAW WITH ELECTRIC MOVEMENTS & DIGITAL DISPLAYS FOR CUTS Brand: GMC MACCHINE SRL Model Type: KGS 660S Serial No.: 13189 Year: 1998 (Photos taken prior to any potential refurbishment, machine offered as-is) MACHINING CAPACITIES: - Max. horizontal cutting length: 5300 mm - Max. horizontal cutting height: 2100 mm - Max. vertical cutting height: 2200 mm - Max. cutting depth: 80 mm OTHER FEATURES: - Power supply: 380V Three-phase+T - Installed power: 7.5 kW - Main motor power: 4.4 kW (6 hp) - Saw blade speed: 5,200 rpm Pneumatic blade feed - Carbide-tipped saw blade: Ø 300 mm, bore Ø 30 mm - Welded steel frame, PVC slat frame with automatic retraction via pneumatic cylinders - Fully lengthwise pneumatic retractable intermediate support with 2 adjustable and retractable stops - Retractable rollers for panel handling - Pneumatic locking of the saw carriage - 8 bar pneumatic feed - Digital display for cuts - Complete extraction system DPS Back cover spans the entire rear of the machine Lower longitudinal channel for sawdust collection Multiple extraction points in the lower section Extraction port: Ø100 mm - Support for floor-mounted installation - CE Marked Total space required when mounted on supports: 6300 x 1600 x 3040 mm (includes operator and maintenance area) Transport dimensions, 2 packages: Lhedpou R Ulhofx Ah Uor . 1 frame 6300 x 860 x h.2620 mm . 1 pallet 3150 x 1000 x 1000 mm Total weight: 1250 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Offered as a lot, without refurbishment or warranty. Ex works price, excluding VAT. Transport and services on request.

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 615 mm, total height: 555 mm, total length: 850 mm, planing width: 330 mm, height adjustment type: mechanical, planing height: 156 mm, chip removal: 3 mm, rotational speed (max.): 9,000 rpm, number of planer blades: 36, input voltage: 230 V, number of feed rollers: 1, PS33 with spiral shaft • Innovative design and powerful motor. • Chip removal of up to 3.2m. • IN & OUT TABLE. Lhjdpfxsvncu Is Ah Uer • Double knife cylinder with double-sided knives. • Indicator shows the material removal on the front of the machine. • Planer shaft with reversible knife • No extraction system required thanks to integrated fan to remove sawdust from the planer cylinder • Depth stop with seven positions for repeated thickness planing at the same height • Maximum part width up to 330 mm • Type: PS33 • Recommended use: Craftsmen • Input power (230 V): 1.8 kW • Planer shaft speed: 9,000 rpm. • Planer shaft diameter: 46 mm • Number of reversible plates in planer shaft: 36 pieces • Reversible plate size: 15 x 15 x 2.5 mm, R=150 • Feed speed: 7.9 m/min. • Max. material removal: 3.2 mm • Max. planing width: 330 mm • Max. planing thickness: 156 mm • Min. workpiece length: 120 mm • Extraction: integrated fan, 62 mm suction nozzle or fabric bag • Noise level: 96 dB • Machine dimensions (length x width x height): 340 x 615 x 555 mm • Machine dimensions with tables unfolded (length x width x height): 850 x 615 x 555 mm • Machine weight: 35 kg • Packaging dimensions (length x width x height): 415 x 660 x 545 mm • Package weight: 39 kg Included in the package: • 36 carbide inserts (in the planer shaft) • 5 replacement carbide inserts and screws • Waste bag for sawdust and Dust • Connection set for waste bags • Torx key for changing the inserts (TX25)

Condition: new, Year of construction: 2025, Firing chamber output: 49 kW Working power: 45 kW New appliance, original packaging: yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 200 mm with freely rotatable plug-in bends Smoke outlet diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Air flow : 3500 m³/h Power consumption: 550 W designed for room volume: 1000 m³ Area to be heated: 200/250 m² Stove height without hot air conveying pipes: 1750 mm Oven width: 700 Oven length without flue gas fan: 1150 Weight: 305 kg Ljdek Utrdjpfx Ah Uohr