Used Scan Max for sale (35,871)

Condition: used, Year of construction: 2007, operating hours: 3,718 h, working width: 24,000 mm, color: yellow, Power: 132 kW (179 HP) Redpfx Ahexrpp Ne Ajch Empty weight: 5.603 kg Technical inspection expiration date: 2027 Volume of the tank: 3100 l Auction item. Fuel pump defective. Gas does not flow to the fuel pump. Working width 24 meters. Air conditioner does not work. Sprayer capacity 3 100 liters. Without batteries.

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and soon available vehicles, on our website. Partial equipment list. Full specification available upon request. Loading Platform: * Low bed with external beams, extendable SUPER LOW design, length approx. 6,850 mm * Low bed with fixed hardwood flooring, about 40 mm thick, with mechanical locking system * Service lines are protected within the extendable beams and automatically adjust to the corresponding low bed length * 5 pairs of lashing rings, foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: * Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm * Gooseneck hydraulically liftable/lowerable and detachable * Technical fifth-wheel load: 23,000 kg * For tractor units: 4 x 2, 6 x 2 Rear Chassis: Rjdpsxarl Nofx Ah Ajch * Rear chassis in short version with closed outer frame and checker plate cover * Chassis equipped with excavator trough, closed in the rear half to house air tanks * 2 pairs of lashing rings, foldable outward (LC 5,000 daN) * 1 pair of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, flat-mounted, on the front & rear of the chassis (LC 10,000 daN) Axles: * BPW axles, hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF * Manufacturer of our choice * Load index (146/146F) * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the truck via standardized EBS interface according to ISO 11992 * For correct display, the truck must be capable of transmitting and displaying this data Braking System: * Braking system compliant with EU regulations, with EBS-E (2S2M) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection rail with sockets 24N, 24S & 15-pin, compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel construction made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Coating: * Complete steel structure automatically shot-blasted after welding using a Grit Wheel System * Second blasting with corundum for optimal coating adhesion * HRM metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final coating with two layers of 2K topcoat, solid color in RAL 3002 carmine red as per RAL system 841GL * Wheels in silver * Rear section metalized and coated in RAL 9010 (pure white) * Metallic paint not possible * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Remote steering from front and rear via cable remote control with push-buttons, with single-track control of axles (without installation on tractor unit) * Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings * Electro-hydraulic power unit * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 40' container on the...

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, DGUV certified until: 10/2027, Universal Dosing Machine Model: U-Max Dosing with time and speed control Stainless steel construction Hopper capacity: 40 l Various accessories available Suitable for a wide range of fill materials such as pralines, jams, confectionery creams, honey, yogurt, creamy butters of both vegetable and animal origin, cream cheese masses, whipped cream, and even mixtures containing cut ingredients (herbs, nuts, olives, etc.). Dosing pistol with hose Including nozzle set: 12 pieces per set, single needle, flat nozzle 180-190 mm Connection: 230 V Dimensions: 700 x 870 x 1130 mm (W x D x H) New device With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Double needle Flat nozzle in special sizes Foot pedal Rcjdpfx Ahew S Sm Sj Ash LCD display Dosing programs Custom fabrication Maintenance contract Service package Delivery service Commissioning & training Visit our large machinery exhibition!

Condition: used, Year of construction: 2004, power: 1.1 kW (1.50 HP), TECHNICAL SPECIFICATIONS - Type : HYGINOX SH-26 C - Year : 2004 - Max flow : 30 m3/h - 316L stainless steel for parts in contact with the product - 1,1 Kw - 1500 rpm - Connection: 2"1/2 - 2’ Rjdpfx Asv Ukx Ueh Asch - SH-26 C: take 90 for dimension E from table in documentation - Reference : 007132

Condition: used, Used machine Used Hettisch Blue Max hardware drilling machine Motor power: 0,8 kW Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops one foot switch press-in die missing!!! Rsdpsw I Um Tjfx Ah Aoch Availability: by arrangement Location: Solingen

Condition: used, mileage: 168,290 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, overall weight: 7,490 kg, first registration: 06/2021, loading space length: 6,070 mm, loading space width: 2,460 mm, loading space height: 2,320 mm, emission class: euro6, color: white, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Internal vehicle number: 87421A The vehicle is located at our location 59929 Brilon, Möhnestraße 54. Equipment lines and packages * L1Y LED lighting package Exterior * F6I Approach/front mirror * K7I Exhaust tailpipe towards the middle of the vehicle * White side indicators * B1B Electronic braking system (EPB) with ABS+ASR * F2U ClassicSpace * Steel compressed air tank * B1C Low compressed air unit * F7W Single-stage entry * F1X Driver's cab: S ClassicSpace * Fresh food box * F6C Tinted windshield * E1N Generator 100 A * G1B 6-speed gearbox - type: G 70-6 * K3S Urea tank (AdBlue): 35 liters * D8A Manual lifting roof (steel) * I6A Body/structure: Chassis * M8Z fuel filter heated * K0E fuel tank: 120 liters * Thermoking V800 Max refrigeration unit * MBB tail lift 1,000 kg * LED daytime running lights * L1H fog lights * C2J wheelbase 4220 mm * C9L frame overhang - extension * Tires rear axle: 4 x 8 mm * Tires front axle: 2 x 11 mm * E9H switch tail lift trailer * Disc brakes front and rear axle * C8J splash guard rear fender * R1B steel rims 6.75x17.5 * Fixed rear underrun protection * C7M Side underrun protection, weight optimized * Perm. Total weight 7.49 t Interior * D4B Classic cockpit * Driving/parking cooling * D4W Electric windows * B1F Heated air dryer * Seat cover/upholstery: fabric * D2V Seats in driver's cab: armrests, driver's seat * D1M Seats in driver's cab: single passenger seat, fixed * D1C Seats in driver's cab: comfort driver's seat, suspension seat * E3I 24V socket in driver's cab Multimedia * J5S Audio system: CD radio (Bluetooth, USB) * Info display 10.4 cm with additional display * J1O Tachograph / EC control device * J9N Preparation for Truck Data Center (fleet management system) Comfort and environment * M5C EURO 6 standard * S1P Driver assistance system: brake assist (Active Brake Assist) * S1H Driver assistance system: lane departure warning * S1D Driver assistance system: stability control assistant * I6X suspension: leaf / air * S5Z cruise control system (cruise control) * F8X light and rain sensor * G5G Mercedes-Benz PowerShift gearshift * C6S stabilizer rear axle reinforced * F8E central locking with remote control Safety * Vehicle outline lights LED * J9D preparation for toll collection * immobilizer Rsdpfjv A Dccsx Ah Asch Other * F6J outside mirror electrically adjustable, left * M0S engine compartment encapsulation * I4A axle configuration: 4x2 * A1M axle load front axle 4.1 t * E1H battery 165 Ah * A2B rear axle crown gear 325 * M1I engine 5.1 ltr. - 130 kW diesel (OM 934) Other: This offer is non-binding. Subject to errors and prior sale If a foreign currency is specified, this will be done at the current daily rate. The currency of the vehicle's location is valid. ----.

Condition: new, Year of construction: 2025, functionality: fully functional, General Description: Specifically designed for grinding soft to medium-hard plastics. Fixed discharge pipe on the grinding bin. Outlet pipe with adjustable airflow and slanted cut. Automatic self-tensioning belt drive system (maintenance-free). Technical Specifications: Sound-insulated stainless steel hopper. Hopper prepared for magnet installation. Grinding chamber: 247 x 284 mm. Number of blades: 3 rotating – 2 fixed. Rotor diameter: 180 mm. Rotor design: Open. Rotor speed: 200 rpm / 50 Hz. Re-sharpenable blades. Screen hole size: 5 mm. Drive motor: 3 kW. Large flywheel providing additional cutting inertia for thick-walled parts. Throughput capacity: 35 kg/h (depending on material, part geometry, grinder size, etc.). Stainless steel collection bin (13 liters), suitable for manual or vacuum discharge. Notes: Stock Availability – granulators equipped with additional options: Rcedpfx Ahsxgn Ugj Ajh with magnet on hopper with antistatic capacitive sensor with discharge pipe

Condition: new, maximum load weight: 39,670 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with hardwood flooring approx. 30 mm thick * Rear of gooseneck in straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two rigid axles, two self-steering axles * Air suspension with lift/lower function * Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Drum brakes * Axle tool kit Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transfer to the tractor unit via the standardised EBS interface as per ISO 11992 * For correct display, the tractor unit must be able to transmit and display these data Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically blasted after welding using a shot blast system * Second blasting with corundum for optimal coating adhesion * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Final coating with 2 x 2K topcoat, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL * Wheels in silver Rcsdpfxsxarlvo Ah Aoh * Rear section metallised and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested with salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Electrical System: * Electrical system in compliance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights blink together with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings at the galvanised connection strip up front * Galvanised folding supports beneath the loading area bevel * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * On the gooseneck, plug-in aluminium side and rear boards, approx. 2,440 x 400 mm (L x H) * The rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support bracket with 1 pair of WADER container locks. Fifth-wheel load approx. 20,000 kg * 7 pairs of WADER container locks for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container on the gooseneck, 2x 20' container * 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area * One galvanised bracket running across under...

Condition: used, Year of construction: 2011, length 300 mm centre height ca. 30 mm diameter 0,5 - 52 mm weight of the machine ca. 0,103 t dimensions of the machine ca. H 0,84 x L 1,00 x P 0,435 m Serviced and calibrated by Studenroth on 24.07.2024 Rsdpfowmwwajx Ah Aoch Length and diameter measuring device: Equipment/accessories: -Software -monitor and computer -Technical documentation

Year of construction: 2019, condition: used, Year of manufacture: Aug 2019 New: No Serial number: DOT 1 NJ09 Rcodjw Nhd Iepfx Ah Aoh 5 STUKS GOEDE TRAILERBANDEN VAN SCHADE TRAILER SCHMITZ.

Year of construction: 1999, condition: excellent (used), - 0.8 kW engine Rcedpoidmu Rsfx Ah Aoh - 400 V power supply - 3 spindles - drilling depth adjustment - pneumatic spindle stroke - integrated blowing on the drilling site - two pneumatic clamps

Condition: used, mileage: 168,290 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, overall weight: 7,490 kg, first registration: 06/2021, loading space length: 6,070 mm, loading space width: 2,460 mm, loading space height: 2,320 mm, emission class: euro6, color: white, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Internal vehicle number: 87421A The vehicle is located at our location 59929 Brilon, Möhnestraße 54. Equipment lines and packages * L1Y LED lighting package Exterior * F6I Approach/front mirror * K7I Exhaust tailpipe towards the middle of the vehicle * White side indicators * B1B Electronic braking system (EPB) with ABS+ASR * F2U ClassicSpace * Steel compressed air tank * B1C Low compressed air unit * F7W Single-stage entry * F1X Driver's cab: S ClassicSpace * Fresh food box * F6C Tinted windshield * E1N Generator 100 A * G1B 6-speed gearbox - type: G 70-6 * K3S Urea tank (AdBlue): 35 liters * D8A Manual lifting roof (steel) * I6A Body/structure: Chassis * M8Z fuel filter heated * K0E fuel tank: 120 liters * Thermoking V800 Max refrigeration unit * MBB tail lift 1,000 kg * LED daytime running lights * L1H fog lights * C2J wheelbase 4220 mm * C9L frame overhang - extension * Tires rear axle: 4 x 8 mm Redpfx Ahev A Dc Aj Aoch * Tires front axle: 2 x 11 mm * E9H switch tail lift trailer * Disc brakes front and rear axle * C8J splash guard rear fender * R1B steel rims 6.75x17.5 * Fixed rear underrun protection * C7M Side underrun protection, weight optimized * Perm. Total weight 7.49 t Interior * D4B Classic cockpit * Driving/parking cooling * D4W Electric windows * B1F Heated air dryer * Seat cover/upholstery: fabric * D2V Seats in driver's cab: armrests, driver's seat * D1M Seats in driver's cab: single passenger seat, fixed * D1C Seats in driver's cab: comfort driver's seat, suspension seat * E3I 24V socket in driver's cab Multimedia * J5S Audio system: CD radio (Bluetooth, USB) * Info display 10.4 cm with additional display * J1O Tachograph / EC control device * J9N Preparation for Truck Data Center (fleet management system) Comfort and environment * M5C EURO 6 standard * S1P Driver assistance system: brake assist (Active Brake Assist) * S1H Driver assistance system: lane departure warning * S1D Driver assistance system: stability control assistant * I6X suspension: leaf / air * S5Z cruise control system (cruise control) * F8X light and rain sensor * G5G Mercedes-Benz PowerShift gearshift * C6S stabilizer rear axle reinforced * F8E central locking with remote control Safety * Vehicle outline lights LED * J9D preparation for toll collection * immobilizer Other * F6J outside mirror electrically adjustable, left * M0S engine compartment encapsulation * I4A axle configuration: 4x2 * A1M axle load front axle 4.1 t * E1H battery 165 Ah * A2B rear axle crown gear 325 * M1I engine 5.1 ltr. - 130 kW diesel (OM 934) Other: This offer is non-binding. Subject to errors and prior sale If a foreign currency is specified, this will be done at the current daily rate. The currency of the vehicle's location is valid. ----.

Condition: new, functionality: fully functional, empty load weight: 130 kg, lifting power: 1,000 kg/m, Year of construction: 2025, machine/vehicle number: 550, Vacuum Lifter Panel System DS 550 MAX - Radio Remote Control Rsdpjxnanzofx Ah Ajch Configuration can be customized to individual requirements SPECIFICATION: • 6 arms, each 1 m long • 6 cross arms with adjustable suction cup mounting • 12 side suction cups • Wall adapter • Control unit with charging function • Control unit with radio remote control • Radio remote control handset • 2 safety belts • Maximum lifting capacity: 1000 kg FEATURES: • Compatible with all cranes and HDS systems • Suitable for various working conditions • Suction cups can be configured independently without tools • Power supply: 12V battery (up to 12 h of operation) • Battery charge indicator • Vacuum gauge • Vacuum reservoir • Max lifting capacity 1000 kg • Device weight approx. 130 kg • Suction cups 500mm x 100mm with REPLACEABLE SEAL

Condition: new, maximum load weight: 40,790 kg, overall weight: 59,000 kg, axle configuration: 3 axles, total width: 2,750 mm, Equipment: ABS, Our complete vehicle inventory with immediately and short-term available vehicles can be found on our website. Excerpt from the equipment details. Full equipment list available on request. Gooseneck: - Gooseneck in SNT design for optimization of the load platform length, approx. length 3,700 mm - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6 x 4 or 8 x 4 Low-bed: - Low-bed with external beams, extendable design, SUPER LOW concept, length approx. 7,550 mm - Low-bed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines routed within the extendable beams, automatically adapting to the respective low-bed length - 7 pairs of lashing rings, foldable to the outside (approx. LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolt-on RUD rings Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at the back - 2 pairs of lashing rings, foldable to the outside (approx. LC 10,000 daN) - 1 pair of flat-mounted lashing rings in the recess (approx. LC 10,000 daN) - 2 pairs of flat-mounted lashing rings in the recess (approx. LC 16,000 daN) - 2 pairs of stake pockets for plug-in posts approx. 100 x 50 mm in the outer frame PENDULAR AXLE: - PENDULAR AXLE, all axles hydraulically and mechanically forced-steered - Hose rupture valve on the axle equalization cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position - Final painting of axles with 2 coats of 2-component paint, single-color in Grey-34-0260 - Technical axle load: 12,000 kg each - Hydraulic axle compensation - Axle tools Tyres: - Tyres 245/70 R 17.5 3PMSF, brand at our discretion. Load index (146/146F) Braking System: - Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical System: - Electrical system according to EU regulations - Lighting 24 V ASPÖCK-NORDIK (ASS3) Rcsdpfx Ahsw Tprbo Aeh - ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Coating: - Complete steel structure automatically blast-cleaned after welding using a shot blasting system - Second abrasive blasting with corundum for optimum bonding of the coating system - Final painting with 2 coats of 2K topcoat, single-color in RAL 3002 Carmine Red according to RAL System 841GL - Rear section metallized and painted in RAL 9010 (Pure White) - Rims in silver grey - No metallic paint available - Paint system tested in salt spray fog test in accordance with ISO 9227-NSS - Cavity sealing with special wax Accessories included: - Prepared for the mounting of bolt-on container positioning devices for 1x 20' or 1x 40' container on the outer beams - Without container locks - 3.5 inch king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel carrier in front of the front wall - On the galvanized connection strip at the front, yellow-red air couplings - Remote axle steering from front and rear, cable remote control via push buttons, with single-track control (no installation in tractor unit) - Electro-hydraulic power unit - On the gooseneck: plug-in alumini

Condition: new, functionality: fully functional, fuel type: gasoline, color: black, maximum load weight: 550 kg, load capacity: 550 kg, Equipment: all wheel drive, The all-wheel drive dumper is supplied with two 12 Ah / 56 V interchangeable batteries, which can be easily replaced. One battery charges to 100% within one hour. Very economical in daily operating costs. Can also be used in areas where noise or emissions have previously been an obstacle. The skip can be tipped. Payload of up to 550 kg possible. Rsdpfok Dz E Dsx Ah Asch

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. The following is an excerpt from the specification. Full specification available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45°, rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading Platform: - Platform hydraulically liftable and lowerable after the gooseneck, approx. 2,800 mm long - Rear taper approx. 1,000 mm x 8° - 6 pairs of folding external lashing rings (LC 5,000 daN) - 2 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of internal folding lashing rings at the front center beam (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) - Grating floor C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm) - Over axles checker plate covering Two-piece steel ramps: - One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm - With gratings C40/4 (point load approx. 2.2 t on approx. 20 x 20 cm) - Ramp with hydraulically foldable ramp sections - Hydraulic lifting frame, hydraulically repositionable - Max. load per pair: approx. 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm do not have to be included in the vehicle length in driving position Landing Gear: - JOST landing gear Axles: - BPW axles and suspension - 2 rigid axles, 1 self-steering trailing axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock activated by reverse gear and manual switch - Air suspension with lifting and lowering valve - Axle tool kit Rcsdew Tprnepfx Ah Aoh Brake System: - WABCO braking system in accordance with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit Tyres: - 235/75 R 17.5 3PMSF tyres – make at our discretion - TPMS tyre pressure monitoring system compliant with ECE R 141. Data transmission to the towing vehicle via standard EBS interface acc. to ISO 11992. To display the data correctly, the towing vehicle must be able to process and show this data. Steel Construction: - High-strength fine-grain steel construction - Steel grades: S355J2+N / S355MC Electrical System: - Electrical system in accordance with EU requirements - 24 volt lighting, ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connector rail with 24N, 24S & 15-pin sockets Paintwork: - Complete steel structure is automatically shot-blasted after welding via turbine blasting machine - Second round of blasting with corundum for optimum coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection - Final coating with 2 layers of 2K topcoat, single color RAL 3002 carmine red - Rims painted silver grey - Rear section metallized and painted in RAL 9010 pure white - Metallic paint not available - Paint system tested in salt spray test according to ISO 9227-NSS - Cavity sealing with special wax Included accessories: - 2 inch king pin - One galvanized steel front wall, approx. 400 mm high - Galvanized folding supports under the loading platform taper - Rear mounting bracket for beacon light - Grating covering in the gooseneck ramp taper C30/3 (point load approx. 2 t on ...

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full specification available on request. Loading area: * Extendable loading platform with pneumatically operated locking mechanism * Loading area with approx. 30 mm thick wooden planks * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tension straps (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres: 385/65 R 22.5, manufacturer at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the truck is via the standardized EBS interface as per ISO 11992. For proper display, the truck must be capable of receiving and showing this data. Axle: * BPW axles and suspension * All axles hydromechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (offset 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system in accordance with EU regulations, EBS-E (2S2M) without connection lines to the tractor unit Steel construction: Rcodpew Tpr Ijfx Ah Aeh * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash together with indicators * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal coating adhesion * Final painting with two coats of 2-component topcoat, single color, RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, with axle tracking monitoring (without installation in the tractor unit) * Electro-hydraulic unit * 4 wheel chocks with holders on the front wall * 2" kingpin * Yellow-red air couplings at the galvanized front connection bar * At gooseneck and rear, left and right, brackets for warning panels, including sockets * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the external frame of the loading platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking position is provided in the extension for a 45' container * 4 pairs of transverse stake pocket strips in the loading area for approx. 100 x 50 mm plug-in stakes * Storage for max. 9 pairs of plug-in stakes bolted inside to the front wall * Boarding ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted front left under the loading platform * An additional INOX toolbox, approx. 1,200 x 46...

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools included Tyres: * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle Rcjdpfx Aow Tprzjh Aoh * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: new, maximum load weight: 37,710 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and shortly available vehicles, on our website. Excerpts from the equipment list. Full equipment details are available upon request. Gooseneck: - Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor approx. 30 mm thick Loading Platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Including 3-piece removable galvanized covers over the wheel recesses (W = approx. 670 mm - max. point load 5 t/each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for hooking in tie-down straps (LC 2,000 daN) Axles: - BPW axles and suspension, 2 rigid axles, 3rd axle steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Tyres: - Tyres 235/75 R 17.5 3PMSF – brand of our choice Landing Gear: - JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake System: - Wabco brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Redpew Tpq Rofx Ah Aech Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: - Electrical system according to EU regulations - 24 Volt ASPÖCK-NORDIK lighting (ASS3) - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S, and 15-pin sockets in accordance with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Top-quality and durable corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single color in RAL 3002 carmine red - Rear section metallized and painted in RAL 9010 (pure white) Accessories Included: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - Spare wheel bracket in front of the front wall - On the galvanized front connection strip, yellow-red air couplings - 4 wheel chocks with holder on the front wall - Mounting for aluminum loading ramps at the rear of the gooseneck - Galvanized folding supports under the rear slope of the loading platform - Bracket for warning beacon at the rear of the trailer - TPMS tire pressure monitoring system in accordance with ECE R 141 - Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer - On the gooseneck and rear panel left and right, holder for warning signs each including socket - 1 hardwood bumper on the rear wall from gooseneck to loading platform - Galvanized holder for extension planks left and right under the loading platform - 4 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the rear central beam (LC 10,000 daN) - On the gooseneck, plug-in aluminum side and rear boards, approx. 2,440 x 400 mm (L x H) - The rear galvanized plug-in stanchions are removable (length of the body approx. 2,560 mm) - A tool

Condition: new, maximum load weight: 61,050 kg, overall weight: 73,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment. Full equipment list available upon request. Loading Platform: * Loading platform with approx. 30 mm thick hardwood floor Rcsdpfsw Tpr Ujx Ah Aoh * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing Legs: * JOST landing legs (mechanical) with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles and Suspension: * BPW axles, technically rated at 12,000 kg each * 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered, mounted on turntable * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 445/65 R 22.5 169K – manufacturer of our choice TPMS * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to tractor unit via standardised EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to process and display this data Brake System: * Wabco brake system as per EU regulations with EBS-E (4S/3M) without connecting lines to the tractor unit Electrical System: * Electrical system in accordance with EU regulations * Lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: * Entire steel construction automatically blasted after welding using a shot-blasting machine * Second blasting with corundum for optimal coating adhesion * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure optimal corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver grey * Paint system tested by salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint finish not possible Including the following accessories: * Loading platform with approx. 30 mm thick hardwood floor * 2-inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection rail * Storage for approx. 1,000 mm long insertable stanchions in the rear central beam * At the gooseneck and rear plate, left and right, one bracket each for warning signs including socket * Remote steering from front and rear via cable remote control with push-buttons, with single-track monitoring of the axles (no installation in the tractor unit) * Electro-hydraulic unit * 13 pairs of stanchion pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Lift axle on 1st and 2nd axle with control via TEBS E depending on current axle load and loading status * 7 pairs of galvanized insertable stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise stanchion pocket strips mounted on the loading platform for stanchions approx. 100 x 50 mm * 2 pairs of WADER container pockets in the loading platform, for 1x10' * 1 shunting coupling with reinforcement bolted to the rear crossmember * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2

Condition: new, maximum load weight: 36,245 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. The full list of features is available upon request. Loading Platform: * Hardwood loading platform with rear bevel approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended * Disc brakes (approx. 377 mm) * Lift/lower function (ET 120) * Axle tool kit Tyres: * 435/50 R 19.5 tyres – brand at our discretion Redpfow Tpqqjx Ah Asch * TPMS tyre pressure monitoring system according to ECE R 141. Data transfer to the tractor unit occurs via standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of transmitting and displaying this data. Braking System: * Wabco braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations * 24V ASPÖCK-NORDIK lighting (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: * Complete steel structure blasted automatically with a shot blasting machine after welding * Second blasting with corundum for optimal coating adhesion * HRM-metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final painting with 2 coats of 2K finish paint, single color in RAL 3002 Carmine Red according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint not possible Including the following additional equipment: * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with holders * 2" kingpin * Loading platform with heavy-duty hardwood floor * 1 spare wheel holder under the loading platform, right-hand side in the direction of travel * Galvanized folding supports under the loading platform's beveled section * 9 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Anti-slip painted sand layer on the central beam * 1 INOX toolbox transversely mounted under the platform, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container pockets in the floor for 1x 20' container, 2x 20' containers or 1x 40' container * 3 pairs of crosswise stanchion socket strips in the platform for plug-in stanchions approx. 100 x 50 mm * Storage for max. 9 pairs plug-in stanchions, approx. 100 x 50 mm, bolted to inner front wall * 2 INOX toolboxes under the platform left and right, approx. 600 x 350 x 600 mm * Holder for aluminium loading ramps, transverse under the pla

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg Rjdpfjw Tpq Djx Ah Aoch - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: new, maximum load weight: 37,820 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and soon-available vehicles on our website. Excerpt from the equipment features. Full equipment list available on request. Gooseneck: - Gooseneck with chamfered front corners approx. 45° and with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading area: Rsdpfxjw Tpqwo Ah Asch - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with 15 x 15 mm square climbing strips and lower area widenings - Between the 1st and 2nd axle one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers for wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Lowering in the chamfer and extending into the loading area for excavator bucket stick accommodation (approx. 2,900 x 750 x 210/290 mm [L x W x H]) - 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) One-piece steel ramps: - One pair of galvanized, one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood surface - Ramps with hydraulic lifting mechanism, hydraulically movable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps less than 300 mm in length do not need to be considered part of the vehicle length in driving position Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, load capacity approx. 24 t (test load approx. 50 t) Axles: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tool Tyres: - Tyres 235/75 R 17.5 3PMSF – brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of transmitting and displaying this data Braking system: - WABCO braking system compliant with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lamps flash with the turn signal - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Paintwork: - Complete steel construction is automatically shot-blasted after welding using a blast wheel system - Second blasting with corundum for optimum coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection - Final coating with 2 layers of two-component topcoat, single color in RAL 3002 Carmine Red, according to RAL System 841GL - Rims in silver - Rear section metallized and in RAL 901

Condition: new, maximum load weight: 90,700 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough * 2 LED reverse lights mounted on the rear panel * European reflector panels (red-yellow) at the rear * One mud flap at the rear * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle Rcsdpfx Ahsw Tgp Dj Ash

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function Rsdpju Sd U Ujfx Ah Aoch * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)