Used Max Simmel for sale (24,639)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives Prsdpfx Asy D I I Rjlcja 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Psdpsy Iyw Sjfx Alcjra

Condition: used, axle configuration: 3 axles, first registration: 07/2023, total width: 2,550 mm, total height: 900 mm, Year of construction: 2023, Rear axle 1: Double wheels; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 2: Double wheels; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 3: Double wheels; Steering; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Empty weight: 9.728 kg Carrying capacity: 39.772 kg GVW: 45.000 kg Podpfxjzwxkyo Alcjra Registration number: 018502 Total length 1260 cm long Bed 840 cm Extendable 450 cm

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,200 h, functionality: fully functional, machine/vehicle number: 09-0302, For Sale: Massey Ferguson 7726 S + MUS-MAX WT9XLZ Wood Chipper Package price: EUR 115,000 (excl. VAT) 🚜 Massey Ferguson 7726 • Year of manufacture: 2018 • Engine hours: 9170 (A complete engine overhaul was carried out approximately 3,000 operating hours ago.) • Price: EUR 70,000 (excl. VAT) • Power: 255 hp nominal / 280 hp max • Front linkage • Front axle suspension • Pneumatic suspension operator seat (360°) • Regular maintenance • Engine oil changed every 250 hours • Transmission: Dyna-6, 50 km/h • LS pump capacity: 200 l/min • 4 double-acting hydraulic outlets with mechanical control • Rear fender lift controls • Electronic linkage control (ELC) with 9,950 kg lifting capacity Pjdpoy Sgmbofx Alcjra • PTO: 540 / 1000 rpm • Air brake system for trailer • MF tires: 55% tread remaining. MUS-MAX WT9XLZ • Year of manufacture: 2009 • Worn parts replaced regularly • New tires • Tower-mounted camera • Additional LED lighting • MUS-MAX tires: 95% tread remaining. • Fully operational – still in active use

Year of construction: 2007, condition: ready for operation (used), A wooden window sash assembly line consisting of three main components is available. 1) Sash stop table with punching unit and Powasert automatic screwdriver. 2) Max Striffler glazing bead saw. 3) Ruchser RU-GOB-ES corner hinge and handle drilling machine, year of manufacture: 2007. Documentation available. An on-site inspection is possible. Package sale only. Psdszi Eimjpfx Alcjra

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,540 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 10,160 mm, color: red, Year of construction: 2019, Equipment: ABS, 1 x lift axle 3 x steering axles. Radio remote steering. Hydraulic ramp. Camera. = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Tire tread depth left inside: 50%; Tire tread depth left outside: 50%; Tire tread depth right inside: 50%; Tire tread depth right outside: 50% Rear axle 2: Dual tires; Steered; Tire tread depth left inside: 30%; Tire tread depth left outside: 30%; Tire tread depth right inside: 30%; Tire tread depth right outside: 30% Rear axle 3: Dual tires; Steered; Tire tread depth left inside: 40%; Tire tread depth left outside: 40%; Tire tread depth right inside: 40%; Tire tread depth right outside: 40% Rear axle 4: Dual tires; Steered; Tire tread depth left inside: 60%; Tire tread depth left outside: 60%; Tire tread depth right inside: 60%; Tire tread depth right outside: 60% Weights Unladen weight: 11,344 kg Payload: 54,656 kg GVW: 66,000 kg Maintenance APK (technical inspection): valid until 02/2027 Financial information Price: Upon request Identification Model number: N/A F-S44 / STEERING AXLE - LIFT Prsdpfezcuxrsx Alcja = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki We make every effort to provide accurate information; however, no rights can be derived from the information provided.

Condition: used, Year of construction: 2020, functionality: fully functional, operating hours: 380 h, power: 6.7 kW (9.11 HP), input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 9 m/min, total height: 1,636 mm, total length: 3,731 mm, total width: 720 mm, overall weight: 950 kg, Equipment: CE marking, documentation/manual, We are offering this used OAV MAX 370P edge gluing machine, manufactured in 2020. Model: MAX 370P Motor power: 6.7 kW Voltage: 400 V Current: A Phase: 3 PH Frequency: 50 Hz Date of manufacture: 03.2020 Serial number: 20030001EB/P1 Including: - Pre-milling cutter. - Miter saw. - Radius milling cutters, top and bottom. - Corner rounding. - Radius scrapers. Pjdpfx Alezrl Izjcera - Cleaning brushes. If you have any questions or would like more information, please feel free to call or email us. The machine can be seen in operation.

Condition: used, Year of construction: 2007, functionality: fully functional, Machine available with or without camera system. New spindle integrated. Podpfjx Hyd Nox Alcsra

Condition: like new (used), spindle diameter 35 mm 5 speeds from 3,000 to 10,000 rpm motor power 5.5 kW Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale Podpfx Aloyfua Ujcsra worktable 120x730 cm 760 kg year of manufacture 2001 can be purchased without feed unit

Condition: used, Cut Max Guillotine Type: GM-1 Efficiency: 1500 kg/h Operating temperature: up to -20°C Machine dimensions: 2100 x 900 x 1850 mm Made of stainless steel Power supply: 3x400V 50 Hz Prodpfxsy Ega Ue Alcea Weight: 550 kg Condition: used/overhauled/ready to work

Condition: new, Catalog number: HZ014 – preliminary milling – edge trimming – new machine, in stock – CE certificate – professional TECHNICAL DATA panel thickness 8-45mm edge thickness 0.4 mm – 3 mm Podpfezrurisx Alcjra min panel width 90mm min panel length 170mm feed speed 9m/min pre-milling 12000 rpm front/rear milling 12000 rpm top/bottom milling 12000 rpm edge trimming 12000 rpm polishing 3000 rpm feed motor power 1.13kW glue tank heating power 1.315kW pre-milling power 1.5kW pre-heating power 0.4kW glue spindle power 0.25kW front/rear milling power 0.22kW top/bottom milling power 2×0.37kW edge trimming power 0.37kW polishing motor 0.12 kW and 0.18 kW motor 6.16kW working height of the table 960mm extended support width 560mm extraction connection 3x125mm dimensions L/W/H 3731x720x1636mm weight 915kg The Holzing G-MAX 480 edge banding machine with pre-milling, saw cutting, top-bottom milling, edge trimming, radius scraping, and polishing ensures a high-quality final result on the workpiece. The veneer can be in rolls up to 3 mm thick and in strips up to 4 mm thick. The machine also has a glue tank with a capacity of 1.2 kg. Net price: 99000 PLN Net price: 23571 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: used, This listing for a 1 of 2 BD Max PCR Machine BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. The BD MAX System is capable of: Independent nucleic acid extraction and purification with built in extractor. PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample Electrical Requirements Prsdpfoxzgw Asx Alcea 100 to 240 V, 50/60 Hz, 10 A, 300 VA Max Dimensions: Weight 250 lb. Depth 28.5 in. Height 37 in. Width 29.7 in.

Year of construction: 2020, condition: good (used), functionality: fully functional, For sale: Farmet FE1000 Clever Max industrial feed / soybean / grain extruder. Manufacturer: Farmet Model: FE1000 Clever Max Year: 2020 Main motor: 110 kW Throughput: approx. 900–2,100 kg/h depending on material and process setup Condition: used, fully functional Location: Slovakia, EU The extruder was used for approx. 2 years. Additional accessories were never used according to seller information. Included: Farmet FE1000 extruder Clever Max control system Psdpsxfcwmofx Alcjra PLC control with HMI touchscreen Frequency converter for the main drive Stainless steel steam conditioner Cutting head Electrical control cabinet Accessories as shown in the photos Suitable for: soybean extrusion full-fat soybean processing cereal and grain extrusion oilseed meal / press cake processing compound feed production pet food and fish feed applications, depending on recipe and final line configuration The Clever Max control system allows better adjustment of extrusion parameters through PLC/HMI control and frequency regulation of the main drive. This is a strong industrial extruder suitable for medium-capacity feed and oilseed processing plants. Sold as shown in the photos. Inspection possible. Loading possible. Worldwide shipping on request. Price: FCA Slovakia, plus VAT. Zu verkaufen: Farmet FE1000 Clever Max Industrie-Extruder für Futtermittel, Soja, Getreide und Ölsaaten. Hersteller: Farmet Modell: FE1000 Clever Max Baujahr: 2020 Hauptmotor: 110 kW Leistung: ca. 900–2.100 kg/h, abhängig von Material und Prozess Zustand: gebraucht, voll funktionsfähig Standort: Slowakei, EU Der Extruder war ca. 2 Jahre in Betrieb. Weiteres Zubehör wurde laut Verkäuferangabe nicht benutzt. Ausstattung: Farmet FE1000 Extruder Clever Max Steuerung PLC-Steuerung mit HMI Touchscreen Frequenzumrichter für den Hauptantrieb Edelstahl-Dampfkonditionierer Schneidkopf Schaltschrank Zubehör wie auf den Fotos Geeignet für Sojaextrusion, Vollfettsoja, Getreide, Ölsaaten, Presskuchen, Mischfutter sowie Pet-Food- und Fischfutter-Anwendungen je nach Rezeptur und Linienkonfiguration. Besichtigung möglich. Verladung möglich. Versand auf Anfrage. Preis: FCA Slowakei, zzgl. MwSt.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: L705226, functionality: fully functional, TECHNICAL DATA Manufacturer: Baron Max Model: KL-2680 Year: 2007 Serial Number: L705226 Control Unit: Fagor 8055TC WORKING CAPACITY Swing over bed: 670 mm. Center height to bed: 335 mm. Center height to top cross slide: 205 mm. Swing over cross slide: 400 mm. Dis. Between centers: 2100 mm. Width of bed: 450 mm. HEADSTOCK Spindle nose: A1-11 Spindle bore: 305 mm. Bar capacity: Ø 105 mm. Range of spindle speeds: 3 rang Gears Auto Shifting Spindle speeds range: H: 1500-331 rpm M: 330-93 rpm L: 92-24 rpm Taper in spindle: MT#6 SADDLE Longitudinal travel (Z-axis): 2000 mm. Cross-slider travel: 450 mm. Size of tool holder: Boring Tool: Ø 40 mm. O.D. Tool & Facing Tool: 25 mm. Ball screw (Dia x pitch): X-Axis: Ø25 mm. x P 5 mm. Z-Axis: Ø50 mm. x P 10 mm. TAIL STOCK Quill diameter: Ø105 mm. Predjvai Swepfx Alcoa Quill travel: 220 mm. Quill taper: MT#5 ENGINE Spindle motor: 20HP Z-axis drive motor: 12 Nm. (FKM 44.3) X-axis drive motor: 6.3 Nm (FKM 42.3) Coolant pump motor: 1/4 HP X, Z-AXES FEED X axis rapid travel: 6 M/min. Z axis rapid travel: 8 M/min. GENERAL Power Required: 20 KVA. Floor space (L x M x H): 4090x1950x1820 mm. Approx, machine weight: 4700 Kgs. EQUIPMENT Coolant system Manual 4-way tool post 4 Jaws Self-centering scrolling chuck Ø 12". Steady rest

Condition: used, functionality: fully functional, SCM Mini Max FS410 Jointer-Planer Jointer: Working width: 410 mm Total length of tables: 2000 mm Length of infeed table: 1000 mm Cutterhead speed: 5300 rpm Podpfxozqdwfe Alcsra Number of knives: 4 HSS knives Maximum cutting depth: 5 mm Fence tilt range: 90°–45° Planer: Table dimensions: 700 × 410 mm Minimum / maximum working height: 3–230 mm Maximum cutting depth: 5 mm Feed rate: 8 m/min Dust extraction port diameter: 120 mm Motor power: 4 kW Total weight: 435 kg Overall dimensions (W × L): 770 × 2000 mm

Condition: used, This listing is for the Thermo Scientifi Max Q 8000 Orbital Shaker-Incubator The unit is in full working condition and is ready for immediate use The MaxQ 8000 provides high-capacity orbital shaking with integrated temperature control. This unit is direct-from-lab surplus in original condition, ideal for growing cultures and general mixing applications while saving valuable floor space. Viewing is possible in Duxford by appointment Professional Asset Overview The Thermo Scientifi Max Q 8000 Orbital Shaker-Incubator was acquired after decontamination as a surplus asset directly from a high-tier research facility. This unit is sold in its Original Lab State. We specialize in Direct Reuse, meaning we do not tamper with, refurbish, or alter the internal components of the machine. You receive the instrument exactly as it was decommissioned from the active research bench. Transparency Report and Technical Audit: • Source Pedigree: Tier-1 Biotech Prsdsyv Ik Njpfx Alcoa • Condition: Direct-from-Bench Original • Power-On Test: Verified • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. • Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is, Where-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory..

Condition: used, This listing is for PCR Max Alpha Thermal Cycler The unit is in full working condition and ready for immediate use Compact and efficient thermal cycler designed for accurate DNA amplification. Features intuitive controls, uniform temperature distribution, and dependable cycling performance suitable for molecular biology workflows. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Podpfx Aey Hw Skolcera • Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), Year of construction: 2022, functionality: fully functional, We are offering our Kornit Atlas Max, built in March 2022, for sale. The machine is first-hand, has always been well-maintained, and regularly and professionally serviced under a maintenance contract. Machine details: • Model: Kornit Atlas Max • Year of manufacture: March 2022 • Location: Germany • First-hand • Regularly serviced (maintenance contract in place) • Very good condition - fully functional and ready for use • Excellent print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer need the Kornit Atlas Max. We have always been very satisfied with the machine and can fully recommend its reliability and performance. Additional information: • The Kornit Atlas Max is ideal for producing high-quality textile prints in large quantities. • Perfect for companies specializing in on-demand production and custom print jobs. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. Included in delivery: • Kornit Atlas Max DTG printer • Maintenance records and documentation • Original accessories A viewing and demonstration of the machine is possible at any time by arrangement. You are also welcome to conduct a test print on-site to see the print quality for yourself. If you are interested, we look forward to hearing from you! An excellent offer for anyone looking for a powerful and reliable DTG printing machine! ----- We are offering our Kornit Atlas Max, manufactured in March 2022, for sale. The machine is first-hand, has been well-maintained, and has been regularly and professionally serviced under a maintenance contract. Machine Details: • Model: Kornit Atlas Max • Year of Manufacture: March 2022 • Location: Germany • First-hand ownership • Regularly serviced (Maintenance contract available) • Excellent condition - fully functional and ready for immediate use • Outstanding print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer require the Kornit Atlas Max. We have always been very satisfied with the machine and can highly recommend its reliability and performance. Additional information: • The Kornit Atlas Max is ideal for producing high-quality textile prints in large quantities. • Perfect for companies specializing in on-demand production and custom print orders. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. Included in the sale: Podpfxov Sci To Alcora • Kornit Atlas Max DTG Printer • Maintenance documentation and records • Original accessories Inspection and demonstration: An inspection and demonstration of the machine can be arranged at any time by appointment. We are also happy to perform a test print on-site to demonstrate the excellent print quality. Price and Contact: If you are interested, we look forward to hearing from you! A fantastic opportunity for anyone looking for a powerful and reliable DTG printing machine!

Condition: like new (used), Year of construction: 2024, bolt circle diameter: 2,500 mm, FARO Quantum X.S Max 2.5m – 2024 + PolyWorks|Inspector Probing A very recent FARO Quantum X.S Max 2.5m from 2024 – complete with ISO 10360 calibration, PolyWorks|Inspector, and training. Are you looking for a high-quality, accurate, and flexible mobile 3D measurement solution? This FARO Quantum X.S Max 2.5m offers a complete solution that allows you to get started right away. The Quantum X.S Max was manufactured in 2024 and is the high-end Max version within the FARO Quantum series. The arm is offered in a probing configuration and is delivered complete with PolyWorks|Inspector™ for tactile 3D measurements and training. Specifications Manufacturer: FARO Model: Quantum X.S Max Year of manufacture: 2024 Measurement range: 2,500 mm Version: 7-axis measuring arm Configuration: Tactile Probing 3 mm iProbe 6 mm iProbe Original transport case FARO Fold tripod Mounting plate Calibration set Power supply/battery and accessories Calibrated according to ISO 10360 The FARO Quantum X.S Max is calibrated according to ISO 10360 before delivery. With this, you will not just receive a used measuring arm, but a professional measurement solution whose performance is checked and documented before delivery. Including PolyWorks|Inspector version 2026 The measuring arm is delivered with PolyWorks|Inspector for probing, which provides you with a powerful and user-friendly software environment for, among other things: Dimensional and geometric inspections GD&T checks Alignments CAD-to-part inspections Graphical measurement reports Digital inspection reports Repeat measurements and series inspections Training included Training is included with the purchase of this complete solution. During the training, the user will receive practical guidance on working with the FARO measuring arm and PolyWorks|Inspector. This allows you to quickly and effectively use the combination within your own measurement environment. Complete measurement solution You will receive: FARO Quantum X.S Max 2.5m Pjdpozvyxpofx Alcera + 3 mm & 6 mm iProbe + FARO Fold tripod + ISO 10360 calibration + PolyWorks|Inspector Probing + Training One complete package, so you can start professional mobile 3D measurements right away. Why choose this combination? Very recent measuring arm from 2024 High-quality Quantum X.S Max version Practical measurement range of 2.5 meters Calibrated according to ISO 10360 Including PolyWorks|Inspector Including training Complete hardware and software solution An interesting alternative to investing in a completely new system A complete, professional mobile measurement solution for a significantly more attractive investment than a new one. Contact us for price, availability or more information.

Condition: used, Year of construction: 1987, turning diameter 400 mm turning length 600 mm swing diameter 600 mm spindle bore 73 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Prodpfeyutrujx Alcsa We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2024, functionality: fully functional, FARO Quantum M Max 3.0m – 7-axis measuring arm for sale incl. Polyworks We, R+S Metallbearbeitung & Lasertechnik GmbH & Co. KG, are selling a FARO Quantum M Max 3.0 m 7-axis FaroArm, 6th generation. Features - FaroArm Quantum M Max, 3.0 m, 7 axes - Bluetooth and Wi-Fi technology - Calibration kit - Mounting plate - iProbes (3 mm & 6 mm) - USB cable & power supply - Robust transport case Podpsw R Tk Nsfx Alcjra - 1 rechargeable battery Additionally: - Magnetic Mount G3+ (150 mm) - iProbe adapter (M4 thread) - Software: Polyworks incl. IGES & STEP - "Complete Care" service plan valid for 5 years (maintenance, calibration & repairs) (4 years remaining) Location: 32130 Enger, Germany If you are interested or have any questions, we look forward to hearing from you.

Condition: used, functionality: not functional, Bovone 371 glass beveling machine, disconnected and ready for loading. Working daily until recently, but limited to around 1m length of glass, due to needing some belt renewals. Now breaking for parts, all available for sale. Predpfxjxbq Dye Alcea Prices subject to part required.

Condition: excellent (used), Catalog number 6393 TECHNICAL DATA - max. width of workpiece: 200mm - max. height of workpiece: 150mm - number of spindles: 4: 1) horizontal lower: 200mm, 5.5kW 2) vertical right: 150mm, 4kW 3) vertical left: 150mm, 4kW 4) horizontal upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm From above: - 6 infeed rollers, toothed, including 2 double rollers - 1 outfeed roller, toothed, rubber From below: - 1 infeed roller, toothed, pulling, swiveling in the lower table - 3 side pressure rollers - 1 outfeed roller, pulling, metal, smooth - all rollers are pneumatically pressed - length of infeed table: 2130mm - table adjustable up/down - central lubrication - electric setting of planing thickness - lifting motor: 1.1kW - stepless feed speed adjustment on inverter - feed motor: 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of dust extraction nozzle: 4x130mm - dimensions (L/W/H): 3550x1750x1800mm - weight: approx. 3000kg ADVANTAGES Prsdpfx Aezu R N Nslcja – with 4 heads – ideal for wet and dry wood – DTR documentation – used machine, very good condition Net price: 49900 PLN Net price: 11880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (prices may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2003, Hettich Blue Max hinge drilling machine, type: Blue Max 19 - FS Number of spindles per row of holes: 11 Prsdpfx Aezhx D Uelcea Number of horizontal spindles: 5 Pot-joint drilling head: yes Drill spacing: 32 mm Clamping device: yes / pneumatic Power consumption: 2.2 kW Stop rulers Accessories: many drill bits (see photos) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), functionality: fully functional, total height: 1,855 mm, table width: 400 mm, table length: 550 mm, overall weight: 225 kg, MAXION UNIMAX 3 Pillar Drilling Machine Technical data: * Manufacturer: MAXION * Model: UNIMAX 3 * Machine type: Pillar drilling machine * Mains connection: 400 V / 50 Hz Prjdpfx Aozvy Tgolcea * Motor power: 0.8 / 1.5 kW, pole-switching * Spindle taper: MK 3 * Continuous drilling capacity in steel E335: 3–25 mm * Normal drilling capacity: up to 30 mm * Thread cutting: M4–M20 * Drilling depth: 125 mm * Overhang: 260 mm * Spindle/table distance: 90–840 mm * Table size: 550 × 400 mm * T-slot width: 14 mm * Column diameter: 110 mm * Speed range A: 80–1,440 rpm * Speed range B: 180–3,200 rpm * Speed: continuously variable * Overall height: approx. 1,855 mm * Weight: approx. 225 kg