Used Schaublin 135 for sale (57)

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with 3-Axis K&C Digital Readout NEW and Accessory Cabinet in Excellent Ex-University Condition! Technical Data: >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle mount: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric thread pitches: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable speed range: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout by K&C (new), 12 months manufacturer’s warranty with user manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> Accessory cabinet containing: - 160 mm 3-jaw chuck with two sets of jaws - Multifix B toolholder with 3 pockets - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steady rests - Coolant system - Centres - Operating manual - And much more About the machine: Gjdox H Szyepfx Ag Touh For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university and only lightly used. Equipped with a NEW K&C 3-axis digital readout and a comprehensive range of accessories. You are invited to inspect the machine under power on site to verify its condition.

Condition: good (used), functionality: fully functional, pneumatic collet clamping device with collets Gusdpfxoz Sppbo Ag Tjh

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 350100, spindle bore: 20 mm, turning diameter over bed slide: 200 mm, turning diameter over top slide: 120 mm, center height: 102 mm, feed length X-axis: 400 mm, quill travel distance: 90 mm, total length: 1,500 mm, total width: 510 mm, total height: 1,550 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 100 rpm, bed width: 130 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 100 rpm, type of input current: three-phase, overall weight: 660 kg, input voltage: 400 V, distance between centers: 450 mm, travel distance cross slide: 100 mm, Schaublin 102N-VM CF precision lathe in excellent condition, fully functional. The machine has undergone a geometric inspection (inspection report available). Included equipment/accessories: - W20 collet set - 4-jaw chuck - Tripan tool turret with tool holder - 2 quick-change 6-jaw chucks - Drilling chuck - CCEA LED lamp - Gear set Guedpfx Agez E Dymo Tjh Machine available for viewing and testing at our premises in Switzerland. Price: CHF 29,900.– (excluding VAT) Loading and transport possible upon request.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, spindle bore: 38 mm, input voltage: 400 V, spindle nose: D1-3, spindle speed (max.): 5,000 rpm, input frequency: 50 Hz, overall weight: 1,200 kg, Schaublin 125 CCN CNC lathe – Retrofitted with Siemens 828D – Retrofit in 2012 For sale: Schaublin 125 CCN precision CNC lathe, retrofitted with a Siemens 828D control system. The machine was manufactured in 2012 and has very few operating hours. As a result, the machine is in excellent condition and is very attractive to companies looking for a compact and precise CNC lathe. Features: Brand: Schaublin Type: 125 CCN CNC control: Siemens 828D, retrofitted in 2012 Low operating hours Very suitable for precision turning work Compact, high-quality Swiss precision lathe Gsdpjz Ix Iwefx Ag Teuh The Schaublin 125 series is known for its high precision, solid construction, and excellent build quality. Thanks to the Siemens 828D control system, this machine combines the well-known mechanical quality of Schaublin with a modern and user-friendly CNC control. A great machine for various applications, including precision mechanical production, single parts, small series, toolmaking, and precision work. The machine can be viewed by appointment. Price and further technical information are available upon request.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Godpfxezlc Apj Ag Tsuh Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: good (used), Year of construction: 1998, functionality: fully functional, Schaublin 102 N, Machine number BL 329218, Year of manufacture approx. 1998, Center height 102 mm, Distance between centers 375 mm, Max. turning diameter over bed 200 mm, Max. turning diameter over slide 120 mm, Spindle speed up to 2,800 rpm, Gsdpfszlcz Esx Ag Teuh Tailstock, Accessories.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 352016, Schaublin CNC lathe, type 140-CNC A2-4, in excellent condition. Gsdpfx Aezub Agsg Teuh Specifications: - FANUC control 21i-TB - Maximum turning diameter over the bed: 300mm - Spindle speed: 50-6000 rpm - Maximum bore of the main spindle: 39mm - 12-position VDI turret with live tools - Machine dimensions: 2530x1400x1840mm - Weight: 3020kg Accessories: - Coolant system - Air filter system (mist collector) - 30 VDI 30 tool holders - 2 VDI 30 live tool holders - Various extras, see photos

Condition: good (used), Year of construction: 1995, functionality: fully functional, Schaublin 125-CCN High-precision lathe with numerical control FANUC 20-T. A LARGE AMOUNT of accessories included. CE compliant!!!! Technical data: >> Machine no. 334949, year of manufacture 1995 Working area: Permissible diameter: over the carriage 270 mm Gjdpoz Ezc Esfx Ag Tjuh over the slide 115 mm in the spindle bore 28 mm largest chuck 130 mm Spindle nose Camlock D1-3 AC drive Power at 50%/100% duty cycle 7.5/5.5 kW Spindle speeds 0-5000 rpm Longitudinal travel Z-axis 400 mm Feeds Working feeds X/Z axis, stepless 0-5000 mm/min Rapid traverse X/Z axis 7.5 m/min Tailstock Mk3 Weight approx. 1500 kg Accessories: 1 pallet, see photo About the machine: Offered is a fully functional Schaublin 125-CCN high-precision lathe with numerical control FANUC 20-T. The machine was manufactured in 1995 and comes with a large amount of accessories. Take advantage of the opportunity to inspect this machine on site while it is powered up and to verify its condition.

Condition: good (used), Year of construction: 1964, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 250 mm, feed length Z-axis: 490 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 490 mm, total height: 1,720 mm, total width: 1,920 mm, total length: 2,250 mm, table width: 305 mm, table length: 1,100 mm, overall weight: 2,000 kg, space requirement width: 1,920 mm, space requirement length: 2,250 mm, space requirement height: 1,720 mm, Equipment: documentation/manual, We are offering this well-maintained Schaublin 53 milling machine, manufactured in 1964, for sale. Serial number: 271090 Technical data – Schaublin 53 N Model: N Longitudinal travel of table (X): 700 mm Vertical travel (Z): 490 mm Cross travel (Y): 250 mm Table clamping area: 1100 × 305 mm Number of T-slots: 5 Max. slot width: 14 H7 mm Spindle mounting (internal taper milling arbor): ISO 40 Spindle bore: 25.2 mm Gjdpeyhm D Defx Ag Tsuh Main motor: 3 / 1500 kW·t/min Rapid feed motor: 1.2 / 3000 kW·t/min Power: 5.1 kW Rapid traverse speed: 3500 mm/s Dimensions (L×W×H): 2250 × 1920 × 1720 mm Weight: 2000 kg Documentation available Accessories available: Dividing head, steady rest, jaw chuck, centering point, various clamping elements and accessories If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), functionality: fully functional, Schaublin 125-CCN high-precision lathe with FANUC 20-T numerical control – A LOT of accessories – CE compliant!!!! Technical data: Godpjz Ezc Sjfx Ag Tsuh >> Machine no. 334511, year of manufacture approx. 1995 Working area: Maximum diameter: Over the cross slide 270 mm Over the carriage 115 mm In the spindle bore 28 mm Largest chuck size 130 mm Spindle nose Camlock D1-3 AC drive Power at 50%/100% duty cycle 7.5/5.5 kW Spindle speeds 0-5000 rpm Longitudinal travel Z-axis 400 mm Feeds Working feeds X / Z axis, stepless 0-5000 mm/min Rapid traverse X / Z axis 7.5 m/min Tailstock Mk3 Weight approx. 1500 kg Accessories: 1 pallet, see photo About the machine: Offered is a fully functional Schaublin 125-CCN high-precision lathe with FANUC 20-T numerical control. The machine was manufactured around 1995 and comes with a large number of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to verify its condition.

Condition: new, schinfa Machinerevisie has been the specialist in revision for over 27 years. Gjdpofhnr Ijfx Ag Touh We do all this in-house. We can grind up to 2700 mm. We bring the machines far back within the DIN standard. We can overhaul a machine from you or deliver a machine from us.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 690 kg, Schaublin 13 milling machine, latest generation. The machine is in very good, fully functional condition. Original accessories and tools can be purchased separately. Spindle taper: SK30 / Iso30 X-axis travel: 320 mm Y-axis travel: 150 mm Z-axis travel: 375 mm Spindle speed range, stepless: 58-2000 rpm Central lubrication system. Rapid traverse and feed rates in the X and Z axes. The machine can be inspected and tested under power by appointment in 5023 Salzburg. Gjdpfxez E A Dwj Ag Tjuh Delivery possible by arrangement.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Gjdpfx Agszb U Epe Touh Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: Series 0i/-MC, total height: 2,580 mm, total length: 2,150 mm, total width: 2,470 mm, table width: 750 mm, table length: 540 mm, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 1,480 h, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, Equipment: documentation/manual, rotational speed infinitely variable, The Schaublin 60 CNC is perfectly suited for high-precision work and small batch production. This machine is renowned for its exceptional dimensional and form accuracy, excellent spindle runout, and top-quality surface finish—ideal for toolmaking, precision engineering, or the medical/jewelry industry! The machine is standard equipped with: - Internal cooling (TSC) - Electronic handwheel - Original documentation Godeyu Rpkspfx Ag Touh - Approximately 30 drawbars

Condition: refurbished (used), For sale is a Swiss Schaublin 13 precision milling machine in fully refurbished condition—better than new. The machine has been completely overhauled in Switzerland. Its geometry has been reworked and the electrical system brought up to the latest standard. All guideways are finely scraped and in perfect condition. All wear parts and spindles have been replaced. Belts are renewed, etc. The machine has not been used since the overhaul. Gsdpfx Agsyw A Hze Touh In this condition, it is an absolute rarity and already considered an investment piece. Ideal for high-precision applications or collectors who appreciate a perfect machine tool.

Year of construction: 1987, condition: used, Schaublin 102N lathe Guodpfozlugysx Ag Tjh

Condition: good (used), Center height: 102 mm Distance between centers: 300 mm Maximum diameter above the carriage: 120 mm Maximum diameter above the bed: 200 mm Spindle bore: 20 mm Collet type: W20 Weight: approximately 450 kg Dimensions: L1200 x W600 x H1400 mm Base: cast iron Equipment: Tailstock, digital cross slide, Tripan turret, tool holder x 3, microscope, chuck, set of 2 drawers, set of collets. Gsdpsz Hwffsfx Ag Tsuh

Condition: excellent (used), Year of manufacture: 1973 Distance between centers: 500 mm Distance between centers (vertical): 125 mm Swinging diameter over bed: 270 mm Swinging diameter over cross slide: 120 mm Spindle bore: 32 mm Spindle nose: Camlock D1-3 Spindle speed: 225 - 3000 rpm Tailstock quill: MK 2 Weight: approx. 930 kg Dimensions W x D x H: approx. 1473 × 730 × 1280 mm Condition: very good Accessories: see pictures Through hole in the chuck: 28 mm Collet system: Schaublin B32 Automatic feed: 4 - 260 mm/min Cuttable metric threads: 0.25 to 8 mm Cuttable inch threads: 112 to 3 threads per inch Gusdpfxozyyn Ss Ag Tsh

Condition: used, Year of construction: 2009, functionality: fully functional, Turning machine with carriage and tooling. Gusdpfezg Hk Tox Ag Toh

Condition: excellent (used), Very good condition Digital, Multifix, collets W32 Gedpfxsy Al Uxo Ag Touh

Condition: good (used), Lathe SCHAUBLIN 102N80, serial number 277444. Guedpfxeztc Dvs Ag Toh

Condition: good (used), SCHAUBLIN 102 lathe, serial number 258639, securely mounted on a workbench (wooden work surface, metal frame, drawer, hinged door, 2 shelves), belt drive. Gsdpfx Aeztc Ubog Tjuh

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Gsdpfx Aew Uc Npog Tsuh Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Condition: used, SCHAUBLIN 202 TG-CNC W25-0127 is a CNC turning, milling and grinding centre engineered for precision, high accuracy and reliability. Capacities: 3 axes, centre height 60 mm, travels Z 300 mm, X 150 mm, collet bore 19 mm (W25), resolution 0.0001 mm, C‑axis 0.0001°. Specs: spindle up to 7000 rpm, power 5/6 kW, max torque 26.1/35.1 Nm, rapid traverse 20 m/min, supply 3×400 V 50 Hz, weight ≈3000 kg, overall 1930×1300×2040 mm. Accessories: coolant, Ethernet, chip conveyor, parts catcher, loader LNS Express 112+, rinsing guns, fire extinguishing system. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Gujdszqbg Rjpfx Ag Toh

Condition: good (used), SCHAUBLIN 102 lathe, serial number 215617. Guedpfjztc Dpox Ag Tsh