Used Schaublin 102 Vm for sale (57)

Condition: good (used), functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Machine equipped with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and ground thread. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Thread cutting range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, Bledeynimhjpfx Aa Nsd max. turning diameter over bed 200 mm, max. turning diameter over cross-slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: good (used), Center height 102 mm Distance between centers 450 mm Leit.- / feed shaft Collets W20 available Speed: about 210 - 3000 U / min reducer gear Left.- Rightrunning 2-Multistage drive L x B x H: approx 1760 x 595 x 1230 mm Bjdpfx Aaocug H Se Neld Weight: 650 Kg Different "Schaublin 102" models in stock!

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Blsdjwvq Tmspfx Aa Ned Technical Data: >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Blsdpfjw N Rh Asx Aa Nod Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Blodpow Iq Umofx Aa Nod Total bed length: 650 mm Center height over bed: 102 mm Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, turning diameter: 240 mm, center height: 110 mm, spindle speed (max.): 3,000 rpm, machine/vehicle number: 219278, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Swing diameter over bed: 220 mm Swing diameter over cross slide: 140 mm Centre height over cross slide: 70 mm Centre height over bed: 110 mm Centre distance: 350 mm Spindle bore: 22 mm Spindle speed: 270–3,000 rpm MACHINE DETAILS Operating voltage: 380 V Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,600 mm Bljdpfxoym Rris Aa Ned Weight: 500 kg EQUIPMENT Tailstock Multifix quick-change toolpost Quick-action chuck Collets Additional suitable accessories External reference: Lot 16 / Ulmer

Condition: good (used), Schaublin 102 N, Machine number BL 329218, Centre height 102 mm, Centre distance 375 mm, Max. turning diameter over bed 200 mm, Max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories, Bljdpfxeynh Hyo Aa Njd

Condition: good (used), Well-running Schaublin with attachments as per pictures with Bodpfx Ajymmn Hea Nold many shots

Condition: used, centre height 102 mm centre distance 450 mm Bodewbi Hpspfx Aa Nold spindle bore 25 mm spindle speed: 220 - 2600 Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories available Guide available Different "Schaublin 102" models in stock! Bsdjcpznhspfx Aa Njld

Condition: good (used), Right & left rotation with knee reverse switch 2 steps Vario Headstock with reduction gearing Cross slide with 90 mm stroke Tripan steel holder 1 set of W20 collets 2 drawers lamp 380 VAC Centre distance: 350 mm Center height: 102 mm Blsdpfjd Htvdsx Aa Njd Turning-Ø over bed: 200 mm Turning-Ø over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MK 2 Weight: approx. 500 kg Machine size W x D x H: approx. 1300 x 600 x 1300 mm Different "Schaublin 102" models in stock!

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Pneumatic clamping system Spindle nose: W 25 Bedpocuhvuefx Aa Neld Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Coolant system available Machine lamp available Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Different "Schaublin 102" models in stock!

Condition: excellent (used), The used SCHAUBLIN 102N bench lathe is a small-sized Swiss precision manual lathe, 102mm center height, 400mm center distance, 20mm spindle hole. 2 similar machines available (one with short bed and quick tooling and the other with long bed and gear head); already complete with electrical panel and safety devices; equipment and conditions as per photo. Bsdpfxjwqxcxs Aa Neld

Condition: used, TECHNICAL DETAILS - center height : 102 [mm] - Max. diameter on bench : 200 [mm] - Distance between centers : 470 [mm] - Type of spindle clamp : W20 - Boring : 20 [mm] - Passage of bar in clamp : 14.5 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 800 [mm] - Machine height : 1300 [mm] - Machine weight : 500 [kg] Bodow Ihttopfx Aa Njld

Condition: excellent (used), The used SCHAUBLIN 120 VM precision parallel lathe is a medium/small sized Swiss manual lathe, 120mm center height, 600mm center distance, 25mm spindle hole. Bedpfxswqxcfe Aa Neld Complete machine with feeds and various equipment, already complete with electrical panel and safety devices; equipment and conditions as per photo.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory no. 2250023, machine comprising: Bledpfjdr R Tcex Aa Njd 1 NEW workbench 2000x800 mm with blue Urphen worktop 2000x800x50 mm 1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-25 workpiece holder without gear reducer with clamping key, serviced 1 serviced cross slide 1 reconditioned aligned tailstock 1 380V/50Hz/3ph motor. 2 speeds 1 used W-25 solid centre 1 set of used W25 collets 1 used Reishauer ZMG 2x3 jaw chuck Ø 110 mm on w-25 flange 1 new set of used Multifix tool holders including -1 type A turret with AG20 stud -2 AD1675 chisel holders -2 AD2090 chisel holders 1 Albrecht self-tightening drill chuck, cap 1-13 mm on CM2 tenon, used 1 used CM2 solid centre point OPTION 1 used tensioner with new belt CHF 1000 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Year of construction: 1987, condition: used, Schaublin 102N lathe with various tools Bledpfeyhyt Aex Aa Nod

Condition: used, total height: 1,700 mm, total width: 1,600 mm, total length: 1,800 mm, Empty weight: 1.650 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Horizontal/vertical: Horizontal - Power [kW]: 4.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 700 - Y-axis travel [mm]: 550 - Z-axis travel [mm]: 430 - Table length [mm]: 1100 - Table width [mm]: 255 Blsdpfx Asymfn Eja Njd - Tool holder: ISO30 - Min. spindle speed [rpm]: 38 - Max. spindle speed [rpm]: 1500 - Options: Digital readout - └ Type of digital readout: Sony - Transport dimensions: 1800mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 1650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Schaublin lathe type 125B in very neat condition. Specifications: - Swing over bed: 270mm - Distance between centers: 500mm - Spindle speed: 40–3000 rpm Accessories: - Heidenhain digital readout ND780 on 2 axes - Multifix toolholder with 6 holders - 3-jaw self-centering chuck with inside and outside jaws - Set of change gears - 2 x drill chuck - Live center - Machine feet - Drive flange - Set of collets with drawbar - Machine lighting Bedpsx Auv Ajfx Aa Nold

Condition: good (used), Step chucks, precision chucks, bell-shaped collets, collet sleeves, collets, tool holders, tool holders, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck 3 pieces -Photography: see photos -Size: 83 to 110 mm, see photo parts list Bodjykiklepfx Aa Njld -Dimensions: Ø 120 x 120 mm -Submission/Price: complete -Transport dimensions: 360/120/H120 mm -Weight: 4.2 kg

Condition: good (used), Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves Bledpfx Aaeykikfo Nsd -Manufacturer: Schaublin, Step chuck precision chuck 6 pieces -Photography: see photos -Size: 51 to 79 mm, see photo parts list -Dimensions: Ø 88 x 120 mm -Submission/Price: complete -Transport dimensions: 270/180/H125 mm -Weight: 6.6 kg

Condition: good (used), Step chuck, precision chuck, bell pliers -Manufacturer: Schaublin, Step chuck precision chuck 7 pieces -Photography: see photos -Size: 21 to 50 mm, see photo parts list -Dimensions: Ø 56 x 120 mm -Submission/Price: complete -Transport dimensions: 230/115/H120 mm Bsdpfjykii Uox Aa Njld -Weight: 4 kg

Condition: used, machine/vehicle number: 1023, Manufacturing origin Swiss Voltage 380/50/3 Netweight 740 kg Dimensions 155x110x160 cm Total power 2,1 kW Customs position 8459.6930 spindle ISO 30, with digital read-out Sony LM31 - 3 axes TECHNICAL DATA Geometrical characteristics VERTICAL RECTANGULAR TABLE - working surface 740x200 mm - number of T-slots 2 - width of T-slots 12-H7 mm - distance between slots 120 mm FIXED ANGULAR TABLE (accessory 13-5.421) - working surface 700x250 mm - number of T-slots 5 - width of T-slots 12-H7 mm - distance between slots 40 mm - provision for lateral traverse 250 mm in all INCLINABLE UNIVERSAL TABLE (accessory 13-5.300) - working surface 600x210 mm - number of T-slots 4 - width of T-slots 12-H7 mm - distance between slots 40 mm - provision for lateral traverse 350 mm in all Angular setting in all 3 planes, in either direction (horizontal-lateral-transverse) 30°-45°-30° SPINDLE INTERNAL TAPER - horizontal spindle head Iso 30 (40) - vertical spindle head Iso 30 (40) - universal high-speed head Schaublin E20 + ES 20 SWIVEL IN VERTICAL PLANE - vertical spindle head 360 ° Strokes and traverses  LONGITUDINAL STROKE : HANDWHEEL-OPERATED/AUTO. - table 320x300 mm - 1 turn of the wheel equals a long. traverse of 5 mm VERTICAL STROKE : HANDWHEEL-OPERATED/AUTOMATIC - knee 375/355 mm - 1 turn of the wheel equals a vert. traverse of 2 mm TRANSVERSE STROKE : ADJUSTING HANDLE - horizontal spindle head 150 mm - 1 turn of the wheel equals a cross traverse of 5 mm QUILL STROKE - vertical spindle head 60 mm ACCURACY ON READING ON MICROMETER VERNIERS - in all 3 traverses 0,02 mm Drive, motors, power feeds Main motor 1,5 kW 1500 rpm Bledpfx Asfnrxwsa Ned Approach-feed motor (rapid feeds) 0,45 kW 3000 rpm Coolant-system motor 0,15 kW 3000 rpm Spindle speeds (stepless) - 1st range 58-375 rpm - 2nd range 330-2000 rpm Working feeds - longitudinal or vertical 12-400 mm/min - 10 feeds, values in mm/min 12-18-26-38-57 85-125-185-270 400 Approach feed (rapid feed) - longitudinal or vertical 1200 mm/min errors and omissions, excepted data given without obligation Inventory Nr. 2180233 machine equipped with : 1 fix table with 4 T-slots 1 digital read-out Sony LM 31 - 3 axes 1 cooling device 1 lighting 1 chips vat 1 Rest 1 Mill fitter long long ISO 30 Ø 13x97 mm avec pivot 1 do Ø 16x97 mm 1 do Ø 22x137 mm 1 do Ø 27x156 mm 1 Mill fitter short ISO 30 Ø 16x29 1 do Ø 22x14 1 do Ø 22x37 1 do Ø 27x60 1 Mill fitter short ISO 30 for plates 1 Mill fitter cylindrical ISO 30 Ø 20 mm 1 do Ø 12 mm 1 do Ø 6 mm 1 Collet fitter ES-32 ISO 30 1 Set of 29 collets ES-32 various 1 Reduction sleeve Alesa ISO 30 / MT3

Condition: good (used), Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm Bljdpfx Asyizh Toa Njd -Weight: 5.3 kg

Condition: excellent (used), SCHAUBLIN 51 5AX CNC is a 5-axis machining center designed for precision, high accuracy and reliability. Working capacities: X300 Y400 Z430 mm; rotary table Ø210 mm; table load V50 H75 kg; A +30/−120°, C360°. Specs: HSK‑A63, 0–20,000 rpm, spindle motor 23 kW, feed 12,000 mm/min, rapid 30 m/min; weight ≈5750 kg; size 2700×1800×2600 mm. Tool magazine 20 places, Ø 80 mm (95 mm free), length 250 mm, tool change 3 s. Accessories: coolant system, water cooler, oil mist extractor FX4000, rinsing gun. Achieves tight tolerances; sectors: watchmaking, aerospace, medical, automotive, machine tools. Blsdpfx Asyn N Rgja Ned