Used Scm K 203 for sale (649)

Condition: repair required (used), Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Bdjdpoy I Srzsfx Abuoi Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: ready for operation (used), functionality: fully functional, Maximum planing width: 230 mm Maximum planing height: 120 mm Spindle diameter: 40 mm 4 heads plus one universal head Head configuration: Bottom, right, left, top, universal Motor power: 4 kW (bottom), 5.5 kW (right), 4 kW (left), 4 kW (universal) Spindle rotation speed: 6000 RPM Table lubrication Electric height adjustment (up/down) Two feed speeds Year of manufacture: 1999 Bjdpfx Aboy N Rb Reujdi Weight: 2320 kg Voltage: 400 V

Condition: excellent (used), Year of construction: 2009, I sell the edge banding machine SCM K130, year 2009. Configuration: Edge banding EVA glue Bodpfxet Ir Tpe Abusdi End cutting saws pneumatic adjustable 0-15° Tilting radius milling pneumatic controllable Free space for further aggregates Very good condition, fully working. Including CE and full documentation.

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of the units 15 kW – from below: Bjdpfxs Af Uube Abujdi 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), SCM K360 HP Edge Banding Machine Liquids Pre-milling cutters, Plate heating Pre-heating unit Edge banding application with roller, Replaceable tank Features a glue drain Pneumatic pre-trimming cutter, Liquids Finished edge trimming cutters Top and bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Bedpfx Aezwd Ikebuodi Profile edging (multi R1-R2), Flat edging, Liquids Polishing unit The machine features NC control Max. component height 60mm Max. edge banding thickness in roll 3mm, Feed rate 11m/min Original mileage less than 30,000 meters, in my opinion, the technical condition is very good Inspection and testing possible on site.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: A1/000156, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 16,000 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 300 mm, number of axes: 6, number of slots in tool magazine: 8, controller manufacturer: Routech- Quicklink, actuation type: electric, total height: 3,270 mm, total length: 32,100 mm, total width: 6,250 mm, overall weight: 21,000 kg, table length: 12,000 mm, table width: 1,000 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Routech OIKOS 12/19x1.25 – CNC 6-Axis Machining Center for Timber Construction For sale is a Routech OIKOS 12 CNC-controlled 6-axis machining center, designed for the precise processing of solid and laminated timber components for structural wood construction. This machine is suitable for the production of structural elements for single-family homes, hall construction, conservatories, carports, garden sheds, playground equipment, as well as general engineered timber construction. It enables complete processing of beams in a single pass – without the need for manual repositioning of the workpiece. Technical Specifications 6 interpolating CNC axes (X-Y-Z-B-C-A) Routech OIKOS 12 Max. workpiece length: 19,000 mm Max. cross-section: 1,250 x 300 mm Min. cross-section: 50 x 20 mm Max. workpiece weight: 1,250 kg (optionally up to 2,500 kg) Voltage: 400 V / 50 Hz Axis travel speeds: X: 107 m/min Y: 75 m/min Z: 28 m/min Rotary axes: A ±140° B ±180° C ±300° Milling Unit 6-axis special milling head TLT 1 (SCM Group) with: 13 kW continuous power (S1) Inverter power 18 kW Spindle speed up to 18,000 rpm HSK 63E tool holder Liquid cooling Processing in one pass: Milling, sawing, slotting, drilling, profiling, cross-cutting – all sides of the workpiece without re-clamping Tool change system Disc magazine “Rapid 8” with 8 tool positions Max. tool diameter: 360 mm Max. tool weight: 8 kg Additionally equipped with: Motorized saw unit Slotting unit with chain Preparation for adapter units Material Handling C-type buffer zone with 6 conveyor belts and 6 clamping chucks, length 13,500 mm Automatic unloading system 13,500 mm with 6 support beams Automatic waste conveyor for offcuts and chips Continuous processing of multiple workpieces possible. Control & Software CNC with PC Office ROUTECH QUICK-LINK user interface Bdodpfxjyu Upue Abuji BTL data import from common CAD/CAM systems 3D simulation with collision check Restart after program interruption possible Separate simulation station “SIMOIKOS” for office workstation Safety & Equipment Enclosed safety cabin with Lexan viewing panel Photoelectric sensors at infeed and outfeed 2 extraction ports in the work area Air-conditioned control cabinet, CE compliant Summary The Routech OIKOS 12 is a high-performance CNC machining center for modern timber construction. With its 6-axis technology, high traverse speeds, complete 5-sided processing without re-clamping, and integrated material logistics, the machine is ideal for joineries and timber construction companies engaged in industrial production. Suitable for companies seeking precise, repeatable, and economical solutions for timber joinery processing.

Condition: used, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Year of manufacture: 2017 Colour: Grey Bsdpfx Absyll Sneujdi - Details: - └ Description: Machine is currently giving fault, error code empty machine - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Corner rounding unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 42 - Transport dimensions: 4800mm x 1000mm x 1800mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), SCM K360 Edge Banding Machine Liquids Pre-milling cutters, Edge banding with roller, Replaceable adhesive tank Features adhesive discharge valve Pneumatic pre-cutting guillotine, Trimming saws R1-R2 top and bottom milling unit, pneumatically adjustable Corner rounding unit, pneumatically adjustable Profile trimming unit, pneumatically engaged Bodpsz Sl R Njfx Abuodi Cleaning fluids Straight trimming unit, Max. element height 60mm Max. edge banding thickness in roll 3mm, Feed rate 11m/min Total run distance approximately 33,000m Very good condition Inspection and testing possible on-site

Condition: excellent (used), Year of construction: 2003, Edge banding machine SCM Type: Contour Bdedpfozynngjx Abuji

Condition: excellent (used), SCM K360 HP Edging Machine Liquids Pre-milling cutters, Bsdpfxoz Hl E Te Abuodi Plate heating Edge banding with roller, Replaceable tank Pneumatic pre-cutter, Trimming saws Up-and-down milling unit (multi milling cutter R1-R2), Corner rounding unit, Profile edging (multi R1-R2), Flat edging, Liquids Polishing unit The machine has NC control. Max. element height: 60 mm Max. edge banding thickness (in roll): 3 mm Feed speed: 11 m/min Original mileage: just under 19,000 meters. In my opinion, the technical condition is very good. The machine can be inspected and tested on site.

Condition: used, Year of construction: 1999, functionality: fully functional, Well-maintained and refurbished SCM edgebander type K208 TERL available in our warehouse. The machine is in very good condition and fully equipped, including: DIA pre-milling cutters Pair of end trimming units Pair of rough straight milling cutters Pair of fine tilting milling cutters Rondomat with 2 motors Radius scrapers Brushes Bsdpfx Abjylxxnouodi The machine has been carefully maintained and is ready for operation. Price: €8,900 + VAT

Condition: used, Year of construction: 2000, functionality: fully functional, working width: 230 mm, input voltage: 380 V, SECOND-HAND 4 SPINDLES MOULDER SCM MOD. COMPACT 23K Bdsdpfxox Rn Uke Abusi Composition - 1st bottom horizontal spindle - 2nd vertical spindle right - 3rd vertical spindle left - 4th horizontal top - Working width mm. 230 mm. - Infeed table 2000 mm. - Year 2000 - CE rules

Condition: like new (used), working width 630 mm stepless feed adjustment 4-knife cutterhead maximum workpiece height 240 mm electric height adjustment 7.5 kW motor star-delta start Bdjdpozxyu Asfx Abusi 380V power supply

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min MACHINE DETAILS Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Glue reservoir for EVA hot melt adhesive Spray unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Bdsdpszmtldsfx Abuei External reference: 7981

Condition: excellent (used), SCM Olimpic K100 edge banding machine pre-milling cutters, glue application using a roller, The glue pot has an exchange function. pneumatic pre-trimmer, pressure rollers, front and rear trimming cutters, R1 – R2 top and bottom milling unit, profile trimming, flat trimming, Bjdpfez E U Hdex Abujdi machine length 320 cm, feed rate 7 m/min, max. workpiece height 50 mm, max. edge thickness 3 mm.

Condition: new, Year of construction: 2023, functionality: fully functional, Machine is new, packed and ready for transport in Sellers warehouse in Croatia ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - "RT-V1" pre-milling unit - "VC-VM" gluing unit (Installed power: 3 Kw, Heating time: 12 min , Glue pot capacity: 1,5 kg) - "SGP" - Smart Gluing Pot - "K/SEL" end cutting unit (Motors power: 0,35 kW, Speed of tools: 12.000 rpm) - "R-K" trimming unit (Motor power: 0 ,55 kW, Speed of cutters: 12.000 rpm, Exceeding material to the panel thickness: 2+2 mm, Min. panel thickness with radius: 12 mm, Vertical/front copying devices: disc/pad, Tool radius: 2 mm) - "ROUND X" rounding unit (Motor power: 0,35 kW, Speed of cutters: 12.000 rpm, Edge thickness: 0,4 3 mm, Panel thickness with a straight angle: 10 50 mm, Panel thickness with a shaped angle according to the profile): 10 30/40 mm, Tool radius: 2 mm) - "RAS-HP MULTIEDGE 2R" edge scraping unit - "Nesting" copying device TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): Bdedpfx Aoza U H Rebusi lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: excellent (used), SCM K560 HP Edge Bander Liquids Pre-milling cutters, Roller glue application, Replaceable tank Features a glue drain Bdjdpfjzlta Sex Abusi Pneumatic pre-trimming guillotine, Liquids Finished edge trimming knives Top-and-bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile edge trimming cutter (multi R1-R2), Liquids Flat edge trimming cutter, Polishing unit The machine has CNC control Max. workpiece height 60mm Max. veneer thickness in roll 3mm, Feed rate 12 and 18 m/min Inspection and testing possible on-site

Condition: used, Year of construction: 2008, machine/vehicle number: AA/H113802, SECOND-HAND EDGE BANDER MACHINE SCM MOD. OLIMPIC 500K "T-E" - (CE) - Pre milling unit - Gluing unit with pre-melter - End trimming unit with double blade - Trimming unit - Edge scraping unit Bjdpfx Absr Iynbousdi - Glue scraping unit - Brushing unit - Year 2008 (CE)

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Bdjdpfxszl Ap Ns Abuji

Condition: used, Used SCM T150K model shaper with tilting spindle. 2.2 kW fence recovery unit. Shaper fence can be detached from the worktable. Fence position adjustment with handwheels and mechanical height indicators. Shaper motor: 7.5 HP. Automatic star/delta starting with rotation reversal. Spindle rotation speeds: 3000/4500/6000/7000/10000 rpm. Removable front fence. Shaper spindle tilt: -10/+45°. Table length: 2550 mm. Bdodpfx Asz Rzu Tsbuei Max. profiling tool diameter: 250 mm. Fast sector table as a replacement for the rings on the table. Weight: 745 kg. Dimensions: 2550x1200x1300 mm. CE marking.

Condition: excellent (used), SCM Sandya 1K Bjdpfx Abjz I Iikjuodi A combined unit with a steel roller and sanding shoe. Main motor: 11 kW. Machine in very good condition.

Condition: used, machine/vehicle number: 007981, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Bdodpfx Abszz Ipmsuoi

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,000 rpm, working height: 120 mm, TECHNICAL DETAILS Working height: 120 mm Working width: 230 mm Feed rate: 6 / 12 m/min Spindle speed: 6,000 RPM Spindle diameter: 40 mm Tool diameter, vertical spindle: 100–180 mm Infeed table length: 2,000 mm Motor power 1st spindle, bottom: 5.5 kW Motor power 2nd spindle, left: 11 kW Motor power 3rd spindle, right: 11 kW Motor power 4th spindle, top: 7.5 kW MACHINE DETAILS Dimensions & Weight Bsdpfx Abszrmpmsuodi Dimensions (L x W x H): 3,250 x 1,550 x 1,500 mm Weight: 1,800 kg EQUIPMENT Documentation

Condition: used, Year of construction: 1999, Storage location: Nattheim Bjdpfxjvvi Rxj Abusdi

Condition: good (used), SCM M3 – Guide rail: 300 mm – Cutting height: 120 mm – Motor power: 22 kW – Weight: 1850 kg – Max. workpiece width: 100 cm – Min. workpiece length: 40 cm – Continuously variable feed rate control Bdedpjyn E Ibefx Abusi – Three rows of anti-recoil guards – Spindle diameter: 50 mm – Arbor diameter: 70 mm – Arbor equipped with gears and 5 saw blades – Saw blade diameter: 200 to 350 mm – Automatic chain lubrication – Four upper pressure rollers The machine and guide rail are in very good condition.