Used Scm Superset Xl for sale (644)

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number). Lrodpotwzyfofx Afwjr

Condition: new, Year of construction: 2023, functionality: fully functional, Machine is new, packed and ready for transport in Sellers warehouse in Croatia ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - "RT-V1" pre-milling unit - "VC-VM" gluing unit (Installed power: 3 Kw, Heating time: 12 min , Glue pot capacity: 1,5 kg) - "SGP" - Smart Gluing Pot - "K/SEL" end cutting unit (Motors power: 0,35 kW, Speed of tools: 12.000 rpm) - "R-K" trimming unit (Motor power: 0 ,55 kW, Speed of cutters: 12.000 rpm, Exceeding material to the panel thickness: 2+2 mm, Min. panel thickness with radius: 12 mm, Vertical/front copying devices: disc/pad, Tool radius: 2 mm) - "ROUND X" rounding unit (Motor power: 0,35 kW, Speed of cutters: 12.000 rpm, Edge thickness: 0,4 3 mm, Panel thickness with a straight angle: 10 50 mm, Panel thickness with a shaped angle according to the profile): 10 30/40 mm, Tool radius: 2 mm) - "RAS-HP MULTIEDGE 2R" edge scraping unit - "Nesting" copying device TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Lrjdpfx Aeza U H Rjfwor Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: used, SCM T120C 8/24 Spindle Moulder Lrsdpfszilpgjx Afwer

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: AB/118718, functionality: fully functional, SMC SCIE spindle shaper SI12TW Table length: 1,500 mm Spindle adjustment: up/down Blade adjustment: up/down Blade angle adjustment: up to 45° Cutting width on the right side: 1,450 mm Maximum blade diameter: 300 mm Milling spindle diameter: 35 mm Ledpszc Dxzsfx Afwerr Spindle speed: 3,000/4,500/6,000/8,000/10,000 rpm Saw speed: 4,000 rpm Motor power: 4 kW Available in the Ardennes region.

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: GA1/002357, functionality: fully functional, input voltage: 400 V, input current: 51 A, input frequency: 50 Hz, overall weight: 6,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Panel Saw Gabbiani Galaxy T 108 PR – 2005 Ljdpfey R Svrex Afworr Manufacturer: SCM Group Weight: 5,000 kg Condition: fully operational Performed maintenance: Complete operational check Inspection of mechanical systems Inspection of electrical system General maintenance Professional machine suitable for industrial production. Available for testing.

Condition: excellent (used), Surface Planer / Jointer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence with angle, size 1500 x 175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. cutting depth: 8 mm Extraction connection: Ø 120 mm Table height: 860 mm Hydraulic table height adjustment with foot pedal Numerical cutting depth display Noise reduction combs on the cutterhead Star-delta starter Emergency stop button CE marked Including all documentation Lrodpfx Afjy Emf Rewer Knife setting gauge NEW drive belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex-location, loaded free on truck. • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Lrsdpfjy Ni Ayox Afwor

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Ledey Hl Iyepfx Afwjrr Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: excellent (used), CNC drilling center, SCM Startech CN V drilling machine Working area: Length X: 300 - 3000 mm Width Y: 90 - 900 mm Thickness Z: 10 - 50 mm Drilling motor power: 3HP 7 vertical drilling spindles, 4 horizontal drills (2 drills on the X-axis, 2 drills on the Y-axis), Lsdszkuzbopfx Afwjrr Notching saw on the X-axis, CNC Maestro software Machine in very good condition, drilling unit and axes operate quietly, Year: 2021, few hours of operation Condition is very close to that of a new machine CE marking Weight: 821 kg

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AH00001546, functionality: fully functional, operating hours: 6,898 h, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, height adjustment type: electric, feed rate X-axis: 22 m/min, actuation type: electric, total length: 7,000 mm, overall weight: 3,121 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, INTERIOR 46 DESIGN Ltd. – Ruse offers for sale: SCM – Stefani MD straight-edge edging machine – manufactured in 2019. The machine was purchased new and used for 5 years in the production of custom-made kitchens. In perfect technical condition. Fully serviced and maintained by SCM Bulgaria. Ledpfxezki Dko Afworr The machine is located in the SCM showroom in Varna. Inspection and testing on-site are possible.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, 5-Axis Machining Center – SCM ACCORD WD Dimensions of workpieces: Length: 250 – 3680 mm Height: 15 – 250 mm Width: 30 – 1950 mm Automatic loading and unloading system equipped with magazines for 32 workpieces: 16 loading positions 16 unloading positions Workpiece width: 120 mm Electronic system for reading workpiece dimensions: Height Width Length Maximum weight of workpiece handled by the automatic table: 480 kg Positioning and clamping system: 6 automatic beams with a total of 18 clamps Device for cleaning workpieces with compressed air, located under the clamping cover directly in the clamping area Adjustable clamping pressure depending on the material being processed Sensor for monitoring pressure loss / loosening of clamping Minimum distance between clamps and beam: 140 mm Automatic table: Maximum travel speed: 80 m/min 5-axis electrospindle: Liquid cooling Power: 13 kW at 7000 rpm Tool clamping system: HSK63E Machining unit with 0–360° rotation, consisting of: Vertical milling unit – 4.5 kW Horizontal drilling unit – 4.5 kW Horizontal milling unit – 4.5 kW Unit for cutting strips/thin parts – 4.5 kW Tool magazine – 48 positions: Tool holder spacing: 104 mm Maximum tool diameter: 350 mm Maximum permissible weight per chain: 250 kg Maximum weight per position: 15 kg Tool support holders: METAL Additional tool magazine 12 positions – RAPID12: Tool holder spacing: 88 mm Ledezk Dfvopfx Afworr Maximum tool diameter: 230 mm Maximum weight per position: 8 kg Additional tool magazine 12 positions – TR12: Tool holder spacing: 130 mm Maximum tool diameter: 300 mm Total number of tool positions: 72 Option to purchase additional tools

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 5 kW (6.80 HP), Automatic electro-mechanic throughfeed case clamp press with eletronic adjustment of the pressing forces, timing and programable closing sequence of the pressing elements. Manufacturer: SCM Group (division CPC) Model: Action TF2500 Production year: 2013 Machine state: plně funkční Main technical parameters: - max. cabinet dimensions: 2500 x 1250 x 650 mm - min. cabinet dimensions: 250 x 250 x 250 mm - feeding belt speed: 20 m/min Lsdpezgtg Ijfx Afwjrr - working height: 600 mm - length of the infeed conveyor: 2500 mm - length of the outfeed conveyor: 2500 mm - overall power 5kW (15A) Funkcionality: Automatic reading of the cabinet at the infeed including the automatic detection of the central fixed shelf. Programator: - control panel with touchscreen LCD (size 14 cm) - setting of the horizontal thrust (0-1300 kg) - setting of the vertical thrust (0-1300 kg) - selection of the closing sequence (top presser, side presser, top/side presser) - setting of the exact position of the middle side pressers

Condition: used, Technical specifications: Max. planing width: 190 mm Max. planing height: 120 mm Spindle diameter: 35 mm Number of spindles: 4 Spindle arrangement: bottom: 5.5 kW right + left: 5.5 kW top: 5.5 kW Lrodpfx Afezguwnswer Gear-driven feed rollers: 3 Dust extraction port diameter: 150 mm Feed system with universal joints Lubrication pump for the work table Pressure: 6 atm Electric lifting of the machine body Power supply: 400 V Overall dimensions: Length: 3300 mm Width: 1230 mm Height: 1730 mm

Condition: used, Technical specifications: Spindle diameter: 30 mm Spindle height: 160 mm Swiveling spindle: -10° - 45° Speeds: 3000/4500/6000/8000/10000 rpm Manual adjustment of spindle height and angle Spindle lock Lredpfxezd Ap Te Afwjr Work table dimensions: 760/2500 x 1000/1500 mm Adjustable support arms Motor power: 4 kW Power supply: 380 V Overall dimensions: Length: 1500 mm Width: 2500 mm Height: 1350 mm

Condition: excellent (used), Year of construction: 2003, I sell the 3-axis CNC working centre SCM SCM RECORD 110, year 2003. Configuration: 3-axis main spindle SCM 6,6kW 24.000 rpm Tool magazine 8 positions ISO30 on working head Useful working area 2690x940 x Z 150mm (300mm). 2 working fields, 4 clamping areas - Flachtisch Automatic central system of lubrication. Pump BECKER 5,5KW 244/286 m3/h. fast neu. Gewicht 3200kg Lredpfxjhhruhe Afwer Xilog Plus new software controller with full instructions ! Very good condition. Available immediately.

Condition: good (used), Code: 0399 Brand: TECNOMAX SCM Model: ST 4 ELITE - CE Standard Saw spindle moulder with tilting blade and scoring unit and tilting spindle moulder for carpentry, furniture, wooden window frames, doors, panels and various - CE Standard Technical data: Squaring carriage length 3200 mm Lredszbmvaspfx Afwer Blade inclination 90-45 degrees Max saw blade diameter with scoring unit mounted 315 mm Max saw blade projection from the table at 90°/45° mm 100/70 Cutting width at parallel guide 1000 mm Scoring unit blade diameter 100 mm Workpiece clamping press Tilting Spindle moulder 90-45° Useful spindle length 125 mm Spindle rotation speed rpm 3500/6000/8000/10000 Max tool diameter 210 mm Tenoning table and head Electrical connection and removable support for the feeding Three-phase motors 5,5 Hp Suction inlet diameter mm 120 Overall dimensions of assembled machine mm 3600 x 3000 x 1100 h Overall dimensions for transport mm 3600 X 1600 X 1100 h Weight kg 645

Condition: excellent (used), Track width: 300 mm Minimum length of workpiece: 390 mm Minimum width of workpiece: 12 mm Minimum height of workpiece: 8 mm Maximum width of workpiece: 950 mm Saw blade diameter: 350 mm Blade bore diameter: 70 mm Spindle speed: 4200 RPM Main motor power: 35 HP (approx. 25.7 kW) Variable feed speed: 6–48 m/min Table dimensions: 1530 × 1100 mm Lredpfxewndqio Afwjr Machine weight: 1800 kg Year of manufacture: 2008 Certification: CE

Condition: new, Year of construction: 2024, Type 205. New. Electric raise and lower with digital display. Tiltable spindle 45 degrees. Large filing table with ruler and stopper. Table movement 1200mm. Interchangeable milling spindle. Equipped with top chuck for end mills. Stable milling stop with fine adjustment and counter. Buy for feeders. A quality machine from the well-known Casadei / SCM. Flexible machine that takes up little space. Ledpfxjuh Sxks Afwerr We arrange shipping al over europe

Condition: used, SCM jointer, Italian made Ledpfxoy Ifglo Afwjrr 4 traditional knives, wedge-clamped Table combs Width: 410 mm Table length: 2600 mm Angled, adjustable fence Brake Well-maintained machine, quiet operation

Condition: used, functionality: fully functional, edge thickness (max.): 3 mm, Used Single-Sided Automatic Edge Banding Machine The SCM Olimpic K208 is a reliable, industrial-grade automatic edge banding machine designed for precise and continuous edge processing of furniture panels and other wood-based boards. It is suitable for processing melamine, PVC, veneer, and coiled edge materials, making it an excellent choice for carpentry workshops, furniture manufacturing facilities, and small production lines. Key Features Type: Single-sided automatic edge banding machine Lodpey Iwu Uofx Afwsrr Manufacturer: SCM Group, Italy Model: Olimpic K208 Application: Edge banding of furniture panels and wood-based boards Processable edge materials: Melamine, PVC, veneer, coiled edge banding Technical Specifications Panel thickness: 10–55 mm Panel thickness with profiling unit: 10–45 mm Edge band thickness: approx. 0.4–10 mm Minimum workpiece length: 140 mm Feed speed: approx. 11 m/min Minimum workpiece width: depending on configuration approx. 100–130 mm (in some listings as low as 65 mm) Standard Equipment Glue unit End trimming unit (front and rear) Top and bottom trimming / milling unit Corner rounding unit (on certain configurations) Scraping and polishing unit Upper pressure beam Chain feed system The SCM Olimpic K208 is a compact yet efficient solution for edge banding operations. Its robust construction, continuous feed system, and the well-known reliability of SCM machinery make it an ideal choice for daily industrial use, particularly in panel-based furniture production.

Condition: used, machine/vehicle number: G-KR114450H, SCM panel saw, good condition, 5.5 kW, approx. 700 kg Prices subject to change, errors, printing and typesetting errors reserved Lrjdpfx Aovw Ec Hefwer

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 2,970 mm, travel distance Y-axis: 1,480 mm, travel distance Z-axis: 330 mm, table length: 2,970 mm, table width: 960 mm, controller model: XILOG Plus, spindle motor power: 11 W, rapid traverse Z-axis: 25 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, Machining centre SCM, model RECORD 110 with solid table. Working area 2970 x 1480 x 3302 mm. Milling spindle 11 kW, tool holder HSK F63, tool magazine with 8 positions, vacuum pump with cooling. The detailed technical specification is provided in the attached PDF file. Ljdpfox Ttlmjx Afwerr

Condition: ready for operation (used), SCM T 120 C without feed mechanism. Lrsdpfxjyw Sydj Afwsr

Condition: used, machine/vehicle number: 008111, Type of edging: Thin edge, Thick edge, Solid wood Lrodpfx Afjy Dq Iajwjr Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, rotational speed (max.): 8,000 rpm, shaft length: 145 mm, No minimum price – guaranteed sale to the highest bidder! Lrsdpjxxar Uofx Afwor TECHNICAL DETAILS Router unit Number of motors: 1 Shaft length: 145 mm Motor power: 4 kW Speed: 8,000 rpm MACHINE DETAILS Installed total power: 5 kW Motor power: 3 kW