Used Scm Superset Xl for sale (576)

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Hnodpfx Aox Twcvsbvji

Condition: used, Year of construction: 2006, · Working area: 2,650 x 1,240 mm · Travel distance X-Y: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm The basic frame structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded triangular plates, making it extremely stable. The use of the triangle shape with a broad base for load-bearing parts is the secret to permanent precision and stability. The layout of the machine allows the operator an optimal workflow while requiring minimal floor space. The resulting frame provides a balanced and secure base for the machining unit with outstanding load distribution. The mobile aggregate carrier is constructed as a solid monoblock. It is positioned along the X-axis on prismatically ground guides via recirculating ball carriages. The machining unit, in turn, is mounted to the mobile carrier using prismatic, ground rails and recirculating ball carriages. Description of aggregates and accessories (basic configuration) Drilling unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill mount: M10 with 11 mm fitting Grooving saw unit in X: · Integrated into the drill head · Grooving saw blade up to max. 120 mm diameter Main milling unit (position 2): · Tool holder HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S6) · Right/left rotation · Ceramic bearings · Includes: 4 tool holders (right), without collets R8L Tool changer Automatic tool changing system for 8 tools. Moves along with the rear aggregate carrier for quick tool access. · Number of tool slots: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total tool weight: 22 kg · Adapter for 1 angle gearbox · Travels in X direction Horizontal milling unit (position 1) Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm, infinitely variable via inverter Hnodpfx Abex Twccevei · 1 output for collet 3–20 mm (ER 32) · 1 output for saw/collet 3–12 mm (ER20) (for saw D=120 mm / 50 mm bore) · Motor power: 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade arbor diameter (ER 20): 12 mm Worktable The worktable is designed to provide the operator with maximum freedom of movement. The quick-action vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of the workpieces. · 6 supports, 1000 mm, steplessly adjustable pneumatically in X · 12 vacuum cups, round, D = 110 mm, steplessly adjustable in Y (2 pcs. per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · The retractable reference stops are CNC-controlled · Pendulum operation standard (2 working fields) --- other clamping systems optional --- Axis movement The drive system for X, Y, and Z axes uses ground recirculating ball screws of the highest precision class. The recirculating ball drive...

Condition: used, Year of construction: 2011, · Working area: 2,550 x 1,067 mm · X-Y travel: 2,980 x 1,450 mm · Z-axis travel length: 150 mm · Clearance height: 120 mm Drilling Unit F14: · Drilling head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm available as an option) · Power: 2.2 kW · Grid: 32 mm · Drill holder: M10 with 11 mm positive fit · Pneumatic feed stroke: 60 mm Grooving saw unit in "X": Hedpfx Absyuw T Nsvoni · Integrated in the drilling head · Grooving saw blade with a maximum diameter of 120 mm Main milling unit: · Tool interface HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power: 7.5 kW (10 HP) from 12,000 rpm (S6) · Right-/left-hand rotation · Ceramic bearings · Prepared for use with angle drives Tool changer TR10: Automatic lateral tool changer for 10 tools. · Number of tool positions: 10 · Maximum tool diameter: 120 mm · Maximum weight per tool: 4.5 kg · Maximum total tool weight: 28 kg A central extraction port collects all processing units into a single connection with D=200 mm. This reduces the required extraction capacity to approx. 3,200 m³/h. TVF worktable: The worktable is designed to provide the operator with maximum "freedom of movement." The vacuum quick-clamping system offers maximum flexibility for precise positioning and optimal holding of workpieces. · 4 TVF supports, L=1100 mm, infinitely adjustable in X · 12 TVF vacuum cups 120 x 120 mm, infinitely adjustable in Y · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total 4 pcs.) · Retractable reference stops controlled via CNC Automatic central lubrication: The correct amount of lubricating grease is distributed via an electronic CNC control unit (X, Y, Z axes) Vacuum system (base machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. negative pressure (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files - Import of ASCII files - User interface in operator’s native language Safety devices with bumpers Machine technical data: · Total connected load max.: 18 kW · Recommended fuse: 64 A · Power supply: 400 V 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction port Ø: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Negative pressure: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L=1,100 mm and 18 vacuum cups 120x120 mm Cross lasers for vacuum cup positioning Two cross lasers mounted on the unit carrier allow for easy positioning of the vacuum cups. Location: Nattheim

Condition: ready for operation (used), Year of construction: 2019, This SCM Olimpic K560 edgebander was manufactured in 2019. It features a 7" touch screen display with Touch 7 electronic control, supports edging thickness from 0.4 to 3 mm, and handles panel thicknesses from 8 to 60 mm. The machine offers a feed speed of 12-14 m/min and includes a hot air edge banding system. Contact us for more information. • Machine Condition: Good condition • 7" touch screen display (16:9) with Touch 7 electronic control • Edging Thickness: 0.4 – 3 mm • Panel Thickness: 8 – 60 mm • Minimum Panel Length: 140 mm • Minimum Panel Width: 100 mm Hodpfx Aoyabq Ajbvoni • Feed Speed: 12 – 14 m/min • Hot Air Edge Banding System

Condition: ready for operation (used), Year of construction: 2001, operating hours: 38,809 h, number of axes: 3, overall weight: 8,000 kg, This 3-axis SCM Record 240 was manufactured in 2001. It features a vertical main spindle and a vacuum table for workpiece fixation. The integrated extraction system ensures a clean working environment, while the Becker vacuum pump provides efficient performance with an inlet capacity of approximately 240 m³/h. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Record 240 machine we have for sale. Contact us for further details. • Voltage: 400 V • Phase: 3 Phase Hnodpfx Absyrcy Novei • Frequency: 50 Hz • Current: 79 A • Workpiece Fixation: Vacuum Table • Main Spindle Type: Vertical Main Spindle • Dust Extraction: Integrated Extraction System • Hours: 38.809 h Additional equipment • Vacuum Pump: Becker VTLF 2.250/1 • Speed: 1440 rpm • Power Requirement: 5.4 kW • Inlet Capacity: approx. 240 m³/h • Maximum Vacuum: approx. 200 mbar • Extraction System: AL-KO • Power: 3.0 kW • Voltage: 400 V • Accessory: BENZ GmbH Angle Head / Angular Aggregate • Tool Holder Interface: HSK63 • Transmission Ratio: 1:1 • Maximum Input Speed: 12,000 rpm • Maximum Aggregate Speed: 12,000 rpm • Direction of Rotation: Right-hand rotation • Lubrication Type: Grease lubrication • Lubricant: Klüber Isoflex NBU15 • Maximum Tool Torque: 20 Nm • Maximum Tool Diameter: 10 mm • Accessory Weight: approx. 5.5 kg

Condition: ready for operation (used), Year of construction: 2021, This SCM DMC SYSTEM belt sander was manufactured in 2021. It features a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Equipped with PRO SAND electronic control and a PLC terminal with a 10.4" LCD color display, it offers advanced user interface capabilities. The machine includes multiple working units for diverse sanding tasks and is powered by inverters for precise speed control. Contact us for more information about this machine. Additional equipment • Vacuum Motor: Powered by inverter up to 7.5 kW integrated into machine frame / Conveyor: Rubber-coated belt conveyor 50 Shore / Feed Belt Motor: 4 kW driven by inverter / Console: Integrated with PC eye-M and Maestro Pro Sand electronic control, Tele Service system, 21.5" LED LCD color display • Programs: 1999 Working Programs / Control System: Interactive troubleshooting, self-diagnosis, Full HD display with multi-touchscreen, Maestro Pro Sand software • Operating Temperature: +5 to 35°C/ Additional Features: Virtual keyboard, production report, display of electric and pneumatic diagrams, user manual. Machine Benefits Technical Machine Benefits • Working width: 1350 mm / belt feed speed: 2 to 16 m/min / control: pro sand electronic control / display: plc terminal with 10. 4" lcd color display Hodpfxoyaqg Ts Abvjni • Sanding belt dimensions: 150 x 5000 mm / chevron belt dimensions: 140 x 4710 mm; 1370 x 2186 mm • Aggregate 1: tie 5000 working unit for extra table internal cross pad / automatic brake, linear blower, sanding belt cleaning system / aggregate 2: do19 orbiting unit for 19 rotating disc brushes / main motor: 1. 1 kw / rotating disc diameter: 125 mm / aggregate 3 & 4: bf300 working unit for brush roller / brush roller diameter: 300 mm / motor: 4 kw / aggregate 5: sc 2620 operating unit for super-finishing pad / chevron belt dimensions: 1370 x 2186 mm / sanding belt dimensions: 1370 x 2620 mm

Condition: ready for operation (used), Year of construction: 2020, working width: 520 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, working length: 2,310 mm, This SCM Abricht/ Dickenhobelmaschine was manufactured in 2020. It features a working width of 520 mm and an adjustable thicknessing height from 3 mm to 250 mm. The machine includes a "TERSA" cutter block system with 4 disposable knives and offers four feed speeds. Consider the opportunity to buy this SCM Abricht/ Dickenhobelmaschine wood planer. Contact us for further details. • Working width: 520 mm • Thicknessing height: 3–250 mm (adjustable) • Surface table length: 2,310 mm • Feed speeds: 5 / 8 / 12 / 18 m/min • Cutter block: TERSA system, 4 disposable knives, 120 mm diameter • Control unit: READY electronic control Hnsdpfsyiucqsx Abvoi • Programmability: up to 99 programs • Axis control: motorized vertical adjustment of thicknessing table with digital position display • Power-assisted changeover: pneumatic/hydraulic automatic lifting of surfacing tables • Supply voltage: 400 V, 3-phase, 50 Hz • Main motor: 9 kW (12 HP) with automatic star-delta start • Braking: automatic electronic motor brake • Suction: 120 mm extraction outlets for surfacing and thicknessing

Condition: ready for operation (used), Year of construction: 2000, Multi-spindle drilling machine manufactured in 2000. This SCM Morbidelli Zenith F2 is designed for processing flat materials such as DTD, MDF, laminated boards, and solid wood. It features a maximum working width of up to 3,200 mm and a maximum working height of approximately 800 mm. If you are looking to get high-quality drilling capabilities, consider the SCM Morbidelli Zenith F2 machine we have for sale. Contact us for further details. • Working area: • X-axis (maximum working width): up to 3,200 mm • Y-axis (maximum working height): approx. 800 mm • Minimum panel width: approx. 230 mm • Minimum panel height: approx. 150 mm Hedsyrtl Ajpfx Abvoni • Drilling units: • 6 lower vertical units • 2 upper vertical units • 2 horizontal units (left and right) • Possible configurations: • Horizontal heads with 21 spindles • Vertical multi-spindle heads (e.g., 11 + 11 spindles)

Condition: ready for operation (used), Year of construction: 2019, This SCM E10 edgebander was manufactured in 2019. It features a 0.4 to 3 mm edgebanding thickness capacity and can handle panel heights from 8 to 80 mm. The machine supports minimum panel dimensions of 50 mm in width and 210 mm in length. It operates with two feed speeds of 4 and 8 m/min and a maximum temperature range of 140 to 220 degrees C. Installed motor power is 3.5 kW. Contact us for more information about this machine. • Edgebanding Thickness Capacity: 0.4 to 3 mm • Thickness of Edges with Shear Device: • (80 mm height) 0.4 to 1.5 mm • (50 mm height) 0.4 to 2.5 mm • (45 mm height) 0.4 to 3 mm • Panel Height Capacity: 8 to 80 mm • Edge Height: 10 to 83 mm Hnsdpfeyabmksx Abvji • Minimum Panel Width: 50 mm • Minimum Panel Length: 210 mm • Minimum Internal Radius with 0.4 mm Edgebanding: • Concave: 25 mm • Convex: 5 mm • Feed Speeds: 4 and 8 m/min • Maximum Operating Temperature: 140 to 220 degrees C • Installed Motor Power: 35 kW • Overall Dimensions: 39.37" x 29.13" x 43.3"

Condition: ready for operation (used), Year of construction: 2019, This SCM Class SI 400EP panel saw was manufactured in 2019. It features a maximum saw blade diameter of 400 mm and a cutting width on rip fence up to 1500 mm. The sliding table saw offers a squaring stroke of up to 3800 mm. Ideal for precise wood panel cutting. Contact us for more information. • Machine Condition: Very good • Maximum Saw Blade Diameter (with Mounted Scorer): 400 mm • Maximum Saw Blade Projection from Table at 90° / 45°: 140 / 97 mm • Cutting Width on Rip Fence (Rip Capacity): 1000 – 1500 mm • Maximum Squaring Stroke of Sliding Table Saw: 3200 – 3800 × 3200 mm • Three-Phase Motor Starting From: 7 kW (8 kW) / 50 Hz (60 Hz) Hjdpfx Abjyabkvjveni

Condition: ready for operation (used), Year of construction: 2018, This SCM DMC sd60 belt sander was manufactured in 2018. It features a working width of 1,100 mm and handles materials from 4 to 170 mm in height. Equipped with a main motor of 15 kW, it offers feed speeds of 4.5/9 m/min. Additional features include a rubber-coated calibration roller, sanding roller, hard sanding pad, and electronic controls for precise operation. Consider the opportunity to buy this SCM DMC sd60 belt sander. Contact us for more information. Machine Benefits Technical Machine Benefits • Working width: 1100 mm • Min. /max. Working height: 4 - 170 mm • Sanding belt dimensions: 1115 x 2150 mm • Feed speed: 4. 5 / 9 m/min • Main motor 15 kw (20 hp) Extra Information ontrol Unit Electronic ammeter for the main motor to display current consumption Electronic display of the working height Electronically controlled sanding belt Electronic working height adjustment Electronic Programming Unit LOGIC 50 K Electronic Programming Unit LOGIC SC with LCD display with two rows of dust-proof polishing keypads and integrated LED signals Workpiece Rubber pressure rollers Kickback protection at the inlet Rubber feed carpet Roller table with two rollers at the inlet and outlet of the work table Pneumatic on/off switching of the roller - 1st unit Hsdpfxjx Nr Sdo Abveni Pneumatic on/off switching of the roller - 2nd unit TES elastic link sanding pad Pneumatic on/off switching of the sanding pad unit Tools "R" unit with roller "CS" combination unit with roller/sanding pad Rubber-coated calibration roller Rubber-coated sanding roller Hard sanding pad "RA" diagonally ribbed steel contact roller in the first unit

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,500 h, This 5-axis SCM Morbidelli M100 was manufactured in 2019. It features a large working area of 3110 × 1620 mm, 21 vertical and 12 horizontal spindles, and a maximum rotation speed of 8,000 rpm. The machine includes vacuum suction cups and has been used for approximately 1,500 hours. Consider the opportunity to buy this SCM Morbidelli M100 CNC Wood Machining Centre. Contact us for more information about this machine. • Machine Condition: Excellent, very little use • Configuration: 5-axis CNC machining centre • Working Area (X × Y): 3110 × 1620 mm • Vertical Spindles: 21 • Horizontal Spindles: 12 • Maximum Rotation Speed: 8000 rpm • Vacuum System: Including vacuum suction cups Hodpfxeyab Axj Abvoni

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,120 mm, travel distance Z-axis: 170 mm, spindle motor power: 15,000 W, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3s SCM M400F wood mill was manufactured in 2018. It features a modular CNC design with a multifunction worktable, ensuring high-quality machining. The machine boasts remarkable performance with a mobile gantry structure and intuitive programming via Maestro CNC software. It offers a maximum spindle speed of 24,000 RPM and a tool magazine capacity of 36 positions. If you are looking to get high-quality milling capabilities, consider the SCM M400F machine we have for sale. Contact us for further details. • Panel clearance in Z: 170 mm • Workpiece length in dual-station mode: 1650 mm • Axes speeds: vector speed X–Y 85 m/min; Z 30 m/min • Tool magazine: up to 36 positions • Drilling unit: 25 independent vertical spindles; up to 12 independent horizontal spindles; max 8,000 rpm • Integrated blades: X-axis blade Ø125 mm; tilting blade 0–90° Ø160 mm • Operations: vertical drilling on panel surface; horizontal drilling on all 4 sides; disc cutter milling; 3/4/5-axis milling • 5-axis operator unit: “Prisma” • CNC/Software: Maestro CNC (“Xilog Maestro”) Hnjdpfxsyi Drbj Abvei Additional equipment • Automated cell version available with loading lift and unloading conveyor belt (optional/subject to configuration)

Condition: used, Year of construction: 2005, total width: 1,100 mm, total height: 1,120 mm, Dimensions (LxBxH): 100 x 110 x 112 cm - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB 173436 - Max. planing width [mm]: 500 - Max. planing height [mm]: 250 Hnjdpfxewnhmhj Abvsi - Worktable length [mm]: 60 - Worktable width [mm]: 520 - Number of cylinders height adjustment [pcs]: 4 - Extraction nozzle diameter [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 1000mm x 1100mm x 1120mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2003, total width: 1,200 mm, total height: 1,600 mm, Dimensions (LxBxH): 365 x 120 x 160 cm Four-sided planer SCM Compact P Hedpfewnhtzex Abvjni Year of construction 2003 Min/max working height 6/120mm Min/max working width 25/230mm Minimum input length is 450mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Min/max tool diameter vertical spindle 120/165mm Input table length 2480mm Exclusive tools. Engines 1st Spindle - Under 5,5kW 2nd/3rd Spindle - Left/Right 7,5kW 4th Spindle - Above 7,5kW Dimensions 3600x1200x1500mm (LxWxH), Weight 1500kg - Year: 2003 - Documentation available: No - CE certificate present: No - Serial number: 021918 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 4 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 4 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - Max. planing width [mm]: 230 - Max. planing height [mm]: 120 - Feed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 1 - Lubrication system: Automatic - Feed speed: - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 12 - Transport dimensions: 3650mm x 1200mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 1,000 mm, total height: 1,600 mm, Empty weight: 925 kg Dimensions (LxBxH): 340 x 100 x 160 cm Four-sided planer SCM Sintex 380V 4 spindles Spindle below / above 7.5kW Spindle left/right 7.5kW Max working height 105mm Max working width 180mm Input table 2300mm Spindle diameter 40mm Total dimensions 3400x980x1600mm (LxWxH), weight 925kg - Documentation available: No - CE certificate present: No - Transport dimensions: 3400mm x 1000mm x 1600mm (l x w x h) - Transport weight [kg]: 925kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hjdpfewng Iwjx Abvoni Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2015, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Empty weight: 1.240 kg Hsdpfexhchdsx Abveni - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2016, total height: 2,350 mm, total length: 4,300 mm, total width: 1,880 mm, Empty weight: 1.310 kg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/226310 - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hnodsxy Rk Rspfx Abvei VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, functionality: unexamined, Complete pneumatic clamping system. Hedsyur N Sopfx Abvsni

Condition: excellent (used), Year of construction: 2022, operating hours: 105 h, Sliding table panel saw with a movable carriage and saw blade tiltable up to 46°, designed for safe operation and requiring 50% less space compared to a conventional sliding table saw and beam saw combined. Simple and fast programmed adjustments via the "Ready" control from the operator panel. Immediate positioning is ensured by a motorized and programmable rear fence, providing fast and precise workpiece alignment. Hnjdpfx Asyb T Trebvsi Robust and reliable telescopic fence with scale and two flip stops: Panel cutting up to 2500x3200 mm (optionally 3200x3200 mm). The large fixed table ensures optimal support of the panel during processing. Technical data Class: px 350i Max. sliding carriage travel [mm]: 2600 / 3200 / 3800 Saw blade tilting range [°]: 0÷46 Max. saw blade diameter (cutting) [mm]: 350 Max. saw blade diameter (milling + cutting) [mm]: 300 Max. cutting height (D350) from table at 90°/45° [mm]: 105/72 Max. cutting height (D300) from table at 90°/45° [mm]: 80/50 Saw blade rotation speed [rpm]: 4000 Cutting width at rear fence [mm]: 1300 Other technical features: Three-phase motor: 7 kW, 50 Hz Extraction hood diameter [mm]: 120 (1) - 100 (2) Dimensions [mm]: L 3859, H 1368 Location: ex works customer - Available at short notice -

Condition: used, Year of construction: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of accessories and tools for milling and drilling, enabling it to meet every requirement in the field of wood processing. Highly efficient – with drilling spindles reaching up to 8,000 rpm – and featuring technology that includes the most robust spindle available on the market, offering more than 1,000 hours of maintenance-free operation. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to adapt the machine precisely to your requirements. Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. User-friendly operation is ensured by the lowered machine frame, which provides unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and the PRO SPACE variant requires no additional structural safety measures. Robust Construction The supporting structure consists of an especially sturdy monolithic steel base, ribbed for stability and durability. The extra-wide bearing surface is purpose-designed to provide the machine with stability, ensuring constant precision in all working conditions. Anchoring to the floor is not required. The base forms a large, solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support, withstanding the highest stress, which ensures superior quality performance and greater accuracy. The moving gantry is a solid single piece anchored to the base, running on high-quality prismatic guides with ball bearing carriages. The working unit is mounted to this and moves along the Y and Z axes on prismatic guides with ball bearing carriages as well. Movement of the lower movable unit (X-axis) and the working unit along the gantry (Y-axis) is driven by a helical toothed rack and pinion system; this produces greater tooth-by-tooth thrust, achieving higher acceleration and increased speed on the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and withstanding significant acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, enabling superior surface finish quality as vibrations are completely eliminated. Travel along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These provide: - Reduced processing times due to improved acceleration - Increased positioning accuracy due to high-resolution encoders Hodpfxjytrgzo Abvsni - Elimination of setup tasks at machine startup thanks to absolute encoders - Elimination of general maintenance tasks, as the brushless system has no brushes Axis movement management and general operation of the working elements...

Condition: used, Year of construction: 2006, Tenoning spindle 2 St. Number of milling agregates 5 St. Spindle diameter 50 mm SCM Windor 40 R window production centre, manufactured in 2006 ----- This machine is part of the sale of a complete window manufacturing operation, see stock number 1305-6979. Machines still connected and ready for demonstration Technical Summary: ----- - 2 long CNC-controlled slotting spindles - Optima 16: Drilling units for face and longitudinal drilling - ROTATEN: Angled window attachment - 3 long CNC-controlled profile spindles + top and bottom unit Hnsdpfxsyn R Ime Abvei - Rebating carriage for small sashes - Workpiece return Options with additional costs: ----- - Used Leitz window and door tools for SCM Windor 40 R. Price: €10,000 - Separate OKOMA UF 3 rebating machine with compatible tools for SCM Windor 40 R systems. Price: €2,000 - Used chip extraction and filtration system for SCM Windor 40 R (See attached PDF for more information). Price 5.500 Euro (Technical specifications according to the manufacturer, without guarantee!)

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: L'invincibile SI X - PANEL SAW WITH DOUBLE BLADE TILTING 931201 Frequency: 50 Hz 570348 Scoring unit with independent motorization 570351 LED lighting in the scorer area 530130 "Full Support & Wireless" 570353 Extension with roller track on the rip fence side 080999 Ex works R01264 L'invincibile SI X CE version 083202 Base 109993 MACHINE LANGUAGE: German 930731 Voltage: 400V EU 080685 Additional packaging Hnedpfx Aex Enrxebvsi 109999 Standard safety regulations Article number: SI X Variant: R021401 Availability: upon request Location: Flörsheim

Condition: good (used), Year of construction: 2005, In 2022, a new control system was installed for €9,000. X-axis: 2500 Y-axis: 1018 for drilling Y-axis: 1240 for milling Z-axis: 100 Hedpfx Aoyrmayobvjni Main spindle: 6.6 kW with HSK 63 interface Front tool changer: 5 positions Rear: 5 positions Drilling unit Milling unit Grooving saw

Condition: used, Year of construction: 1992, working width: 520 mm working height: 250 mm cutter head: strip-knive Hnedpfx Aboyt E Raevei number of blades: 4 height adjustment: electrically read out workpiece thickness: scale feed speed: 2 speeds infeed roller: steel outfeed roller: steel table roller: yes motor power: 5,5 kW suction connection: 140mm machine length: 1200 mm machine width: 1400 mm weight: ca. 900kg