Used Scrap Baler for sale (595)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Hedpox A U Ncjfx Abdei Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, cutting force: 850 t, empty load weight: 140,000 kg, year of last overhaul: 2022, We offer this ready-to-use Lefort CC-850TON scrap shear/baler, year of manufacture 2008 (completely overhauled in 2016 by Corema (Lefort)). Machine type: CC-850TON Serial number: 359 The shear was fully overhauled in 2016, and the shear head was overhauled again by Corema (Lefort) in 2022. All invoices for the refurbishment are available. Hedpfxeyft D Ss Abdji All documents (manual, plans, spare parts catalogue) are also available. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, machine/vehicle number: REFLEX 36290, This is a fully functional machine that will be ready for delivery in December 2025. It includes a loading table - it has dimensions of 6000 * 2500 mm. The length of the chamber is 6000 mm. The expected status as of December 31, 2025 will be approximately 8,800 hours. The machine is located at: U Panelárny 461, Předměřice nad Labem. Hsdswhnbfepfx Abdei

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 112010, pressing force: 60 t, filling opening width: 550 mm, filling opening length: 1,160 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 420 kg, total width: 1,400 mm, total height: 2,170 mm, total length: 1,890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,430 kg, power: 7.5 kW (10.20 HP), year of last overhaul: 2025, Brand: Dixi Hsdpfx Abewnpyvedei The stated price is exclusive of statutory VAT, ex works, and without packaging. The press is cleaned and function-tested. Technical details: Manufacturer: Dixi Type: 60S Bale format (LxWxH): 1200 x 800 x 1100 mm Bale weight: 340-500 kg External dimensions (LxWxH): 1890 x 1400 x 2170 mm Filling opening: 1160 x 550 mm Pressing force: 600 kN Throughput: 1 - 2 bales / hour Number of wire channels: 4 Weight of the press: 2,430 kg Power supply: 400 V / 50 Hz Power consumption: 7.5 kW Installation site: indoor / covered outdoor Serial number: 112010 Year of manufacture: 2011 We refer to the respective original documentation, which can be obtained directly from the manufacturer.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 113889, pressing force: 60 t, filling opening width: 550 mm, filling opening length: 1,160 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,100 mm, bale weight: 420 kg, total width: 1,400 mm, total height: 2,170 mm, total length: 1,890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,430 kg, power: 7.5 kW (10.20 HP), year of last overhaul: 2025, Brand: Dixi The stated price is exclusive of statutory VAT, ex works and without packaging. The press is cleaned and function-tested. Technical details: Manufacturer: Dixi Hsdpfx Aownpx Eobdei Type: 60S Bale format (LxWxH): 1200 x 800 x 1100 mm Bale weight: 340-500 kg External dimensions (LxWxH): 1890 x 1400 x 2170 mm Filling opening: 1160 x 550 mm Pressing force: 600 kN Throughput: 1 - 2 bales/hour Number of wire channels: 4 Weight of the press: 2,430 kg Power supply: 400 V / 50 Hz Power consumption: 7.5 kW Installation location: indoors / outdoors under cover Serial number: 113889 Year of construction: 2012 We point out the respective original documentation, which can be obtained directly from the manufacturer.

Condition: good (used), Year of construction: 2006, Garbage compactor, garbage press, press container, garbage container, self-compacting compactor, waste press, paper press container, paper container, cabinet press, vertical baler -Manufacturer: Bramidan, cabinet press vertical baler -Type: 4-0 S50 KBP PES243768-2 -Drive power: 5.5 kW -Pressure: 50 t -Filling opening: W x H 1350 x 760 mm -Bale ejection device: bale dimensions 1200x800x1100 mm -Transport dimensions: 1400/2040/H2880 mm (press can be laid down for transport) -Weight: 2750 kg Hsdsxnb Nyjpfx Abdei

Condition: good (used), Year of construction: 2001, Garbage compactor, garbage press, press container, garbage container, self-compacting compactor, waste press, paper press container, paper container, cabinet press, vertical baler -Manufacturer: Husmann, cabinet press vertical baler -Type: KBP 20 -Drive power: 3 kW -Pressure: 20 t -Filling opening: W x H 1250 x 680 mm -Bale ejection device: bale dimensions 1200x950x850 mm Hsdpjxg Dp Tjfx Abdsi -Transport dimensions: 1450/1160/H2980 mm -Weight: 1300 kg

Condition: good (used), Waste compactor, waste compactor, compactor container, waste container, self-compacting container, waste compactor, paper compactor container, paper container, cabinet compactor, vertical baler Hodpfx Ajxwuilsbdei -Manufacturer: DIXI, Cabinet baler, vertical baler -Type: 15 S -Drive power: 4 kW -Pressure pressure: t -Interior dimensions 1100x690x1370 mm -Transport dimensions: 1540/950/H1970 mm -Weight: 834 kg

Condition: good (used), Year of construction: 1992, Roller compactor, packing station, garbage compactor, garbage press, press container, garbage container, self-compactor, waste compactor, paper compactor, paper container, cabinet press, vertical baler, cardboard reducer, paper baler, rotating waste compactor -Manufacturer: Bergmann, paper baling press -Type: PS 8100-38 -Waste compactor: with rotating compaction unit -Advantage: It can be filled continuously -Drive power: 2.02 kW -Filling opening: 1190/990/H670 mm Hedpfsxrpi Ajx Abdei -Bale volume: 1 m³ -Transport dimensions: 1600/1200/H2200 mm -Weight: 898 kg

Condition: new, Year of construction: 2026, functionality: fully functional, New shear blades, for example for Lindemann LU 1010 Dimensions: 200x80x524, split version (see drawing) 8 pieces available / 2 sets Price per piece. Hodpfx Abex R Ud Eedsi

Condition: good (used), Year of construction: 1981, functionality: fully functional, Equipment: documentation/manual, Automatic channel baler BOA Continu 25 LB + conveyor belt. The baler is in good condition and has been regularly serviced. Recently, the Denison pump underwent a complete overhaul. Fully functional and in continuous operation. Please contact us for further information. Hsdpfew S Tv Ujx Abdsi

Year of construction: 2021, operating hours: 200 h, condition: like new (used), Amos Belt Press OPUS 1200 including fruit washer Amos ELE 280 N. The entire system is made of stainless steel, including the electrical control cabinet. Few operating hours. The unit is being sold due to the acquisition of a larger press system. Hsdpfx Aewimqzsbdsi

Condition: refurbished (used), Year of construction: 2019, operating hours: 20,000 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap Shear MS-6300e (scrap shear with electric motor), supplied without operating fluids. Model: MS-6300e Cutting force: 630 t Cutting length: 1600 mm Discharge height: 600 mm Power: 110 kW Capacity: 12–17 t/h Machine weight: 40 t Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy-saving - Cost-effective - No foundation required Hsdpfex Tp H Hsx Abdoi Function: Scrap is fed into the intake area using an excavator. Due to the horizontal loading area and the self-weight of the scrap, the material falls into the loading chamber and the cutting area. The scrap is compressed against the front wall and is cut by the horizontally moving tool carriage, pressing the material over the blades mounted on the front wall. While the tool carriage moves horizontally, the processed material is pushed out through the blades at the front end of the chamber. When returning to the rear position, the loaded scrap moves by gravity into the shear. The scrap shears are available in various configurations according to customer requirements, and the output size can be customized (with new orders). Inspection and test operation are possible.

Condition: excellent (used), Year of construction: 2023, operating hours: 3,500 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for economical scrap cutting: - simple automatic operation - Energy-saving - Cost-saving - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. Hedpouu Upgefx Abdei The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 400 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory VAT, ex works, and without packaging. The baler has been cleaned, function-tested, repaired, and fitted with a new control system according to EN16500 standards. All replacement parts used are original Strautmann components. Technical Details: - Manufacturer: Strautmann Umwelttechnik - Model: PP 1207 Hedpowq Ifvofx Abdsi - Bale size (LxWxH): 1180 x 700 x 800 mm - External dimensions (LxWxH): 1838 x 1059 x 2871 mm - Transport height: 2050 mm - Feed opening: 1190 x 400 mm - Pressing force: 59 t / 580 kN - Throughput: 1 - 2 bales/hour - Number of strapping channels: 4 - Machine weight: 2,300 kg - Power supply: 400 V / 50 Hz - Power consumption: 4 kW - Installation location: Indoors / outdoor covered areas - Includes starter kit for 19 mm bale strapping - Year of manufacture: 2002

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: PVM 324212-1, pressing force: 20 t, filling opening width: 1,200 mm, filling opening length: 480 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,200 mm, bale weight: 250 kg, total width: 1,030 mm, total height: 2,790 mm, total length: 1,775 mm, input voltage: 400 V, input current: 16 A, overall weight: 1,250 kg, warranty duration: 6 months, noise level: 64 dB, power: 4 kW (5.44 HP), BRAMIDAN vertical baler B 20 suitable for pressing cardboard and foil - very well preserved, overhauled in the workshop, new hydraulic hoses. Hsdpfxsvm U Rlj Abdei UVV test according to DGUV rule 214-017 when delivered new. Price ex works Stutensee, own collection possible, alternatively shipping by freight forwarder in the cost statement

Condition: new, Year of construction: 2024, functionality: fully functional, cutting force: 630 t, power: 110 kW (149.56 HP), total width: 2,400 mm, total length: 9,400 mm, total height: 3,800 mm, overall weight: 50,000 kg, cutting length (max.): 1,600 mm, type of input current: three-phase, Scrap Shear MS-6300mex (mobile version, with electrical motor) Diesel Generator 250KW is optional Modell: MS-63000e Cutting Power: 630t Blade length: 1600mm Output size: 500mm Power: 110 KW Capacity: 8-15 t/h Machine Weight: 39 t (+ Dieselgenerator 4t) Hooper size: 3900mm x 2400mm Information: Container Shear is used for economical scrap processing/ easy automatic operation/ energy saving/ cost saving/ no foundation needed. It can cut any kinds of scrap material. Different models for your choice. Machine is not suggested to cut high-carbon steel; axles; wire rope; pig iron; spring steel plate; rail; alloy steel; hub and so on... (these are not good for blades) Hsdpor Ihziofx Abdei Function: Scrap is filled into the hopper by means of a grab loader. Due to the horizontal movement of the holder and the scrap’s dead weight, it falls to the bottom of the loading chamber and into the cutting space. After having been compressed on the front wall, the scrap is cut by the horizontally-moving tool-holding side via the blades on the front wall. While the tool-holding slide is moving horizontally, the processed material is pushed out via the blades on the container’s front wall. While returning to the rear position, the loaded scrap moves under its own weight into the shears’ interior. The scrap shear machines are available with different design, depending on the customer requirements. The output size can be choose (only for new order).

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Hodpjyicp Aofx Abdji Year of manufacture: 2015 Pressing force: 40 t

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Hodjyibv Ispfx Abdji Pressing force: 40 t

Condition: good (used), Year of construction: 2002, functionality: fully functional, Vertical Baler HSM VL 600, Year of Manufacture 2002 Technical Data: Manufacturer: HSM Model: HSM VL 600 Year of Manufacture: 2002 Pressing Force: 60 t Drive Power: 7.5 kW Cycle Time (Idle): 37 s Filling Height: 1130 mm Filling Opening: 1150 x 735 mm Bale Size: 1200 x 1100 x max. 1200 mm Bale Weight: 550 kg Weight: 3575 kg Materials: Paper, Cardboard, Film The baler is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Inspection—powered if required—is possible by appointment at any time. Upon request, we can also perform trials with your own material for a handling fee. If you have any questions regarding the machine, please feel free to contact us by phone from Monday to Thursday between 08:00 and 14:00, and Fridays between 08:00 and 13:00. Please note: Hedpfx Aox Iryrjbdsi All technical data is based on information provided by the manufacturer. We do not assume any liability for the information supplied or possible errors. The offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspection is possible by prior arrangement. Sale is ex works against prepayment, without warranty or guarantee.

Condition: used, Roll-off container with lid Skip container, bin container Year of manufacture: approx. 2000 Capacity: approx. 4 m³ Internal length: approx. 300 cm Internal width: approx. 160 cm Loading edge height: 80 cm Unladen weight: approx. 800 kg Permissible total weight: approx. 8,000 kg - Steel sheet lid, divided in two per side - Steel partition wall in the middle of the container - 4 lifting hooks for skip loader truck or crane transport Hjdpfx Aox N Ikvsbdji - Tipping joint on both sides - Heavy-duty construction made from thick material Required space (L x W x H): 320 x 180 x 125 cm Good condition 3 units available Price per unit

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: SPD 18 SELE, tank capacity: 18,000 l, overall weight: 6,765 kg, pressure (max.): 200 bar, power: 5.5 kW (7.48 HP), input frequency: 400 Hz, Gebruikte Husmann afvalperscontainer, Pers is te transporteren als haakarm container Hsdpfx Aex N Elwebdsi Inhoud 18M3, bouwjaar 2009. operationele druk 200 bar met een 5,5 KWh motor. Transport in Nederland een optie tegen meerwaarde. eventueel een 2e afvalperscontainer ook te koop

Condition: used, Year of construction: 1983, total width: 750 mm, total height: 900 mm, total length: 2,400 mm, Empty weight: 500 kg Hedpfx Ajxalyysbdoi - Year: 1983 - Documentation available: No - CE certificate present: No - Transport dimensions: 2400mm x 750mm x 900mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2015 Pressing force: 40 t Hjdpfoyhbxcex Abdei

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450HD special waste baler is the ideal baler for compacting difficult materials such as PET bottles, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also scrap tyres and car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Hodpfx Abevug Dyjdji Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long dual cylinders for even and early compaction of the material User-friendly lever control Bale kicker for easy eject the bales Extra retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting PET bottles Food cans and sheet metal containers Canisters and plastic containers / packaging Scrap tyres and car bumpers Big bags Cardboard and plastic film / foils Other difficult valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls / bale wire Motor 11 kW 32 Amp Demo-Video shows BTS-MF550HD Special Waste Baler. Can Baler, Can Waste Baler, PET Baler, PET Compactor, Tyre Baler, Tire Baler, Scrap Tyre Baler, Scrap Tire Baler, Tyre Compactor, Tire Compactor, Can Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor