Used Scrap Baler for sale (1,535)

Condition: used, empty load weight: 8,955 kg, maximum load weight: 27,045 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2023, next inspection (TÜV): 11/2025, loading space length: 10,620 mm, loading space width: 2,374 mm, loading space height: 2,210 mm, loading space volume: 55 m³, total length: 11,755 mm, suspension: air, tire size: 385/65 R22,5, color: silver, mileage: 150,000 km, gearing type: mechanical, fuel consumption (urban): 1,175 l/100km, Equipment: ABS, Colour: White Aluminium RAL9006, unladen weight: 8,955 kg, permissible gross weight: 36,000 kg, cargo space (L x W x H): 10,620 mm x 2,374 mm x 2,210 mm, tyre size: 385/65 R22.5, loading volume: 55 m³, 1st axle:, 2nd axle:, 3rd axle:, air suspension, underrun protection, front lift axle, height control, electronic braking system (EBS), toolbox, spare wheel carrier, roof roll tarp, high-pressure hydraulic cylinder: Hyva, two-leaf vertical doors (1/2 + 1/2) without portal crossbeam, 6mm floor, 4mm side walls in HARDOX, HYVA hydraulic cylinder, partial LED lighting Auerböck, 1,150 mm fifth wheel height unladen. Subject to errors and changes. Plus VAT when selling in Austria. Pgedpfx Adjxyu D Usijw

Condition: used, Year of construction: 2018, operating hours: 40,350 h, Baling Press Presona LP 85 VH2 with Cross Tying, Year of Manufacture 2018 Technical Specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year: 2018 Drive Power: 2 x 45 kW Operating Hours: 40,350 Pgodpfx Aoxm Shqjdiow Effective Operating Hours: Approx. 22,000 Pre-press Force: 28 t Main Press Force: 85 t Feed Opening: 1500 x 1100 mm Bale Dimensions: 750 x 1100 mm Bale Weight: 450–650 kg Theoretical Throughput Volume: 1,200 m³/h Throughput Capacity at 30–100 kg/m³: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Press Transport Dimensions: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: Approx. 27,000 kg The press was removed from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data refer to the manufacturer’s information. We do not assume liability for the specifications provided or for any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale only by advance payment, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2001, functionality: fully functional, KAMPWERTH SHD 1600 horizontal baler, incl. 3 interchangeable containers 48000x2800x3000 Paper baler // Waste baler // Refuse baler Baler, 1 unit • Type: Kampwerth SHD 1600 • Year of manufacture: 2001 • Unladen weight: 3,500 kg • 15 kW Pedpfxexm Skrs Adijgw • Dimensions: 5000x2300x3700 mm (disassembled for transport) Container box for baler, 3 units • Year of manufacture: 2001 • Volume: 28 m³ • Unladen weight: 3,100 kg • Filling weight: 12,000 kg • Dimensions: 7000x2400 mm Location: Bielefeld

Condition: new, Year of construction: 2020, functionality: fully functional, conveyor belt length: 17,000 mm, conveyor belt width: 1,500 mm, total length: 18,000 mm, total width: 2,300 mm, total height: 6,000 mm, discharge height: 4,500 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, Cometel C-1500-CH (P = 10”) Short summary The Cometel C-1500-CH (P = 10") is a heavy-duty chain conveyor engineered for high-volume removal of stamping scrap and industrial recycling materials. Designed for continuous service in demanding environments, the C-1500-CH features a robust chain-and-flight conveyor design with modular components and simple maintenance, making it suitable for metal stamping facilities, recycling centers, or any application requiring fast and reliable evacuation of substantial quantities of chips, slugs, and scrap. Key features - Heavy-duty chain & flight system: 10” pitch chain (P = 10") fitted with welded steel flights, sized to transport irregular, sharp, and high-density scrap materials without jamming. - Rugged construction: Structural steel chassis with wear-resistant liners in the trough and impact zones; available upgrades include stainless steel or Hardox wear plates for handling abrasive or corrosive materials. - Modular and configurable: Standardized modules for various lengths, widths, and flight heights allow adaptation to different machine lines, presses, or scrap bunkers. Pjdpfxexywfhj Adiogw - High throughput capability: Engineered for continuous, high-capacity operation—ideal for bulk scrap flows found in metal stamping and recycling applications (capacity varies with material density, width, and flight dimensions). - Powerful drive & gearbox: Industrial gearmotor with torque reserve for peak loads; available soft-start function reduces mechanical stress during start-up. - Simple installation & integration: Flanged connections and precision alignment features enable rapid installation to presses, hoppers, balers, or downstream systems. - Maintenance-friendly: Quick-access inspection covers, greaseable chain pins, and replaceable wear strips minimize downtime and service requirements. - Safety & compliance: Fitted with safety guards, emergency stop cables, and optional safety interlocks to meet industrial safety standards; custom guarding available for robot or press interfaces. Typical materials handled - Stamping scrap (slugs, burrs, strips) - Sheet metal offcuts and coil edge trim - Heavier machining chips and fragmented scrap (with optional coolant drainage) - Mixed metal recycling streams (ferrous and non-ferrous)

Condition: good (used), Year of construction: 2007, Baler STRAUTMANN PP1208, year of manufacture 2007 Psdpfxoxwc Nyo Adiogw

Condition: used, Year of construction: 2011, machine/vehicle number: 340000674, The HSM V-Press 403 baler is a compact solution for the efficient compaction of waste and recycling materials. This used baler offers excellent performance and is ideal for companies looking to optimize their waste management and save space. With its robust design and user-friendly operation, it is perfect for use in various industries. Technical details: Machine no. 6113.114 Serial number 340000674 Pressing force: 33 kN Power supply: 400 V / 50 Hz Dimensions: approx. 1,200 x 800 x 1,500 mm (L x W x H) Output: 1.1 kW Pgjdpsunzn Njfx Adiew Rated current: 2.6 AMP Year of construction: 2011 Weight: approx. 300 kg

Year of construction: 2021, operating hours: 200 h, condition: like new (used), Amos Belt Press OPUS 1200 including fruit washer Amos ELE 280 N. The entire system is made of stainless steel, including the electrical control cabinet. Few operating hours. The unit is being sold due to the acquisition of a larger press system. Pgodpfx Adewimqzjijw

Condition: used, Year of construction: 2000, operating hours: 28,155 h, Baler Paal Konti 200 D, year of manufacture 2000, optionally available with matching Paal KEM-1400 conveyor belt Technical data: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Pgjdpfoxgp Ibjx Adiew Bale dimensions: 750 x 1100 mm, variable length Binding: 4-fold automatic Throughput at 35 kg/m³: approx. 9.5 t/h 60 kg/m³: approx. 16.5 t/h 100 kg/m³: approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film The baler was dismantled from running operation. Complete documentation available. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the details provided or for any possible errors. Subject to prior sale; the offer is non-binding and may be withdrawn at any time. Inspections are possible by prior arrangement. Sale is on a prepayment basis, ex works, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 18,800 h, functionality: fully functional, machine/vehicle number: MH 3725, cutting force: 600 t, power: 180 kW (244.73 HP), empty load weight: 96,000 kg, total width: 3,000 mm, total length: 17,000 mm, total height: 4,000 mm, overall weight: 96,000 kg, cutting length (max.): 7,100 mm, Hydraulic scrap shear Taurus 600 t, type 2L Podpfexpnlwsx Adiogw Year of manufacture: 2008 Operating hours: approx. 18,800 Filling box: 7100 mm Drive: 2x 90 kW Lid force: 3000 kN 4x side cylinders Hold-down device Centralized lubrication system Control: PLC Oil heating available Remote control and operation from control panel possible Throughput with mixed scrap: 10-17 t/h Very fast and high-performance machine Including Pramac generator GSW455V 450 kVA from 2020 with approx. 6900 hours.

Condition: used, Year of construction: 2006, operating hours: 54,050 h, pressing force: 80 t, filling opening width: 1,020 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, oil tank capacity: 2,100 l, power: 94 kW (127.80 HP), empty load weight: 21,000 kg, Technical data baler: Manufacturer Paal Typ Konti 275 E Year of construction 2006 Hours of operation in total 54,050 hours Press power main press 80 tons at 300 bar Specific press capacity 9,7 kg/cm² Feed channel 1,600 x 1.020 mm (l x w) Throughput capacity under operating conditions 350 m³/hour Bale size 750 x 1,100 mm, length variable Driving motor 75 kW Connected load 94 kW Rated current 180 A Tying system 4-fold vertical, fully automatic Pedpfxexcxm Ej Adisgw Bale weight up to 750 kg, depends on material Volume hydraulic oil tank 2,100 l SPS controller (manuf., type) Siemens Simatic S7-300 Operating panel (manuf., type) Siemens Multi Panel Transport dimensions only baler 11,152 x 2,152 x 3,000 mm (l x w x h) Machine weight baler approx. 21 tons Condition of the baler: The press and conveyor belt are in satisfactory working condition, see photo documentation. Further technical data and dimensions for the conveyor belt are not currently available. The plant is currently still in operation and is to be replaced by a larger press plant in the coming months. Scope of delivery: Bale press, bale chute, conveyor belt and machine documentation. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Dismantling and loading is the responsibility of the buyer. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2015, Year of manufacture 2015, serial number 413.00.032, pressing force 600 kN Podpfx Adoxwc Najisgw

Condition: used, Year of construction: 2020, operating hours: 2,530 h, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20719 Specifications: Model year: 2020 Operating hours: approx. 2,530 Engine power: 129 kW Undercarriage: See photo Interchangeable jaws Pgedpfswrl U Rsx Adisw Includes one extra jaw for finer fractions Description:Arjes waste shredder, model year 2020, primarily used for processing wood and bark. Equipped with interchangeable jaws, and delivered with an additional jaw suitable for producing finer output fractions.Quick delivery available. Hours: 2530 Own weight: 14500 Model: Impaktor 250

Condition: reconditioned (used), Year of construction: 2008, operating hours: 23,000 h, machine/vehicle number: 00834, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,315 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 30 kW (40.79 HP), year of last overhaul: 2025, Equipment: documentation/manual, Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler, hereby offers the following machine(s) A repaired HBC60 (30kw) Repaired – in very good technical condition Year of construction: 2008 Volume capacity m3/hr max. 365 334 321 301 Volume weight kg/m3 max. 15 30 50 80 Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Bale length - adjustable Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Pressure force ram - max 60 tonf. Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW Following repairs have been done in our official Bollegraaf OEM Refurbishment Workshop: * Safety doors needle installation replaced with new * Ram wheels behind replaced with new * Bronze strip above ram replaced with new * Movable beam position switch ram replaced with new * Scraper above ram replaced with new * Sealing pre press cylinders replaced with new * New steel beams channel cylinder * nieuwe buisjes oplassen en wielen gangbaar maken * New pusher cylinder underneath vertical tying unit Psdpjxck U Ujfx Adiegw * Safety hatch behind needle installation replaced with new * Several cables and asi modules replaced with new * New air filter * New oil filters

Condition: good (used), Year of construction: 2024, Medium-sized baler, BMO, 150 Auto – used – : Pgsdow D Rvqspfx Adiew Price ex location: now only €3,950 instead of €4,900 (net) Manufacturer: Orwak Model: Compactor 3150 Type: 150 Auto HT RAL 3150 Serial number: 167317 Year of manufacture: 2024 Serial number: 167317 Dimensions of raw material bale: Height: 800 mm Width: 1,000 mm Depth: 1,000 mm Weight: up to 150 kg (depending on material) Cycle time: 40 seconds Feed opening dimensions: Height: 460 mm Width: 1,003 mm Depth: 800 mm Baler dimensions: Height: 2,546 mm Width: 1,366 mm Depth: 1,000 mm Own weight: 720 kg Transport height: 1,976 mm Power supply: 220 – 240 V Motor: 1.1 kW / 10 Amp. Pressing force: up to 7.6 t Operating noise: 62 dB • Easy and uncomplicated loading, even with larger cartons • Ideal for medium material quantities up to 3.3 t / month • Integrated retaining claws to reduce material spring-back • Fully automatic bale ejection – effortless removal of the bale from the press Former new price: €10,802.00 (net) Condition: good Available: immediately Location: 68307 Mannheim

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, film Pgsdpsxfh H Hjfx Adisw Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a service fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any potential errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Pgedpfx Adoxcngneijw Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, transport height: 2,300 mm, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Pgsdpfxjxl Rqbo Adisw Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Pgjdsv Amw Nopfx Adisw Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 12 t, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 450 kg, total length: 5,500 mm, Equipment: documentation/manual, The machine is in very good condition and regularly serviced. Manufactured in 1994, it was purchased from the original owner and is ready for use. The baler is started manually by a button or fully automatically using a photocell in the loading chute. Cutting blades mounted on the pressure plate cut the material and compress it in the baling channel. Once the desired length is reached (bale length adjustment is available), the bale is automatically tied after several baling cycles. Pgodpfxexw R D Ee Adiow The bale can be tied with wire, twine, or polypropylene tape. Automatic baling system with a 12-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Baling pressure: 120 kN Bale size: 700 x 500 x 600 - 1200 mm Bale weight (depending on material): 280-450 kg Transport length: 5.5 m Weight: 3500 kg Drive power: 7.5 kW Transport costs depend on weight, volume, and, above all, distance. The following information is important for inquiries: Delivery address (postal code and city name), but further details require a phone call. Therefore, please inquire about transport costs and other delivery methods by calling us.

Condition: good (used), Year of construction: 2021, Medium-size baler, MACFAB, 150A – used -: Pgedpfx Ajw D E Uujdisw Ex-site price: now only €2,950 (net) instead of €3,900 (net) Manufacturer: MACFAB Model: 150 AUTO HT Serial number: MFE1066 Year of manufacture: 2021 Serial number: 167317 Bale dimensions Height: 1,000 mm Width: 975 mm Depth: 800 mm Weight: up to 150 kg (depending on material) LOADING CHAMBER DIMENSIONS Height: 470 mm Width: 975 mm Depth: 800 mm Machine dimensions Height: 2,630 mm Width: 1,560 mm Depth: 1,030 mm Weight: 780 kg Transport height: 1,955 mm SPECIFICATIONS Power supply: 220 – 240 Volt, single phase Motor: 2.2 kW – 16 Amps Pressing force: up to 8 tons Noise level: 68 dB Cycle time: 40 seconds A medium-sized vertical baler that compacts cardboard or plastic film into bales weighing up to 150 kg. Ideal for businesses such as supermarkets or retail stores generating a moderate volume of packaging waste. The large top door opening makes it easy to load materials into the bale chamber. Finished bales can be easily ejected onto a Euro pallet using the hydraulic ejection cylinder. The baler is equipped with three strapping points to secure the bales after pressing. Original price: €10,802 (net) Condition: good Availability: immediately Location: 68307 Mannheim

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, pressing force 50 t, with lifting and tipping device Technical data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: triple, wire, manual Throughput (bulk density): 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or on our YouTube channel. Inspections, including under power, are possible at any time by appointment. We also offer test runs with your material for a handling fee upon request. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00, and Friday from 08:00 to 13:00. Please note: All technical data are based on information provided by the manufacturer. We do not accept liability for any information given or for possible errors. This offer is subject to confirmation, prior sale, and may be revoked at any time. Pjdpsxfh Htefx Adisgw Inspections are possible by appointment. The sale is ex works against prepayment, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. Podpfx Aexbgnhodiegw The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2021, Chamber Press - Baler MACFAB BMF150 HT, used 🧰 Product Features • Manufacturer: MACFAB • Model: BMF150 AUTO HT • Condition: Used, see photos • Colour: Green Pgodpfx Adjxwc Uioiow • Year of manufacture: 2021 • Dimensions: approx. 1560 x 1030 x 2630 mm • Own weight: 786 kg • Pressing force: 80 kN • Cycle time: 40 seconds • Power: 2.2 kW (16A) • Voltage: 220 - 240 V (single phase) / 50/60 Hz • Noise level: 68 dB • Bale weight: 150 kg (depending on material) 💰 Price €3,700 net, excluding VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: possible at any time by appointment Over 5,000 linear metres of pallet racking from various manufacturers permanently in stock (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our Terms and Conditions, all prices excl. VAT, ex stock.)

Condition: used, Chamber Press – Baler ORWAK Compactor 3150, used 🧰 Product Features • Manufacturer: ORWAK • Model: Compactor 3150 • Condition: Used unit, see photos • Color: Green • Year of manufacture: 2024 • Dimensions: approx. 1366 x 1001 x 2546 mm • Net weight: 720 kg • Pressing force: 50 - 80 kN • Cycle time: 40 seconds • Power: 1.1 kW (10A) • Voltage: 230 V (single phase) / 50/60 Hz • Noise level: 62 dB • Bale weight: Plastic up to 190 kg, Cardboard up to 150 kg 💰 Price €3,900 net excl. VAT Pgsdpfx Aoxvzthedisw • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: possible at any time by appointment Constantly over 5,000 running meters of pallet racking from various manufacturers in stock (Technical data, details, and prices subject to change and errors excepted. Intermediate sale reserved! See our terms and conditions. All prices excl. VAT ex warehouse.)

Condition: used, Year of construction: 2005, Chamber press - baling press Austropressen APV 300, used 🧰 Product features • Manufacturer: Austropressen • Model: APV 300 • Condition: Used item, see photos Podpjxvy N Ujfx Adiogw • Color: turquoise • Year of manufacture: 2005 • Dimensions: approx. 1620 x 1260 x 2920 mm • Own weight: 1650 kg • Pressing force: 300 kN • Cycle time: 45 seconds • Power: 5.5 kW • Voltage: 400 V (12.5 A) • Bale weight: 300 - 400 kg 💰 Price: €7,200 net excl. VAT • Quantity discount: on request • Shipping: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock (Technical data, details, and prices subject to change and error, as well as prior sale! See our GTC, all prices excl. VAT ex stock.)