Used Scrap for sale (462)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2441.05, cutting force: 1,122 t, total width: 9,000 mm, total length: 19,000 mm, total height: 5,700 mm, overall weight: 320,000 kg, operating pressure: 350 bar, loading space height: 1,800 mm, cutting width (max.): 810 mm, DGUV certified until: 11/2026, ejection height: 850 mm, filling opening length: 7,500 mm, filling opening width: 2,300 mm, The described scrap shear from Leimbach, including the associated conveyor belt, is for sale. The machine is in operation. An inspection at our facility is possible by prior arrangement in 68219 Mannheim. In addition to the existing oil filtration system, an electrostatic oil purification system from Kleentek has been installed. The machine is available upon agreement. Further information is available upon request. Djdpozzxbtofx Apmscp Delivery terms: EXW Mannheim, Rheinauhafen. The dismantling of the goods and its subsequent loading onto the means of transport will be carried out at the buyer's expense and risk. The selling price and delivery terms are negotiable. The sale is exclusively to commercial customers. This offer is non-binding and is subject to a technical and legal review as well as a contractual agreement between the parties.

Condition: excellent (used), Year of construction: 2020, operating hours: 3,700 h, functionality: fully functional, A scrap shear in perfect condition is for sale. The machine can be inspected at any time. Dsdpfx Apo Aia S Djmscp

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, A mobile scrap shear in new condition is for sale. Inspections can be arranged at any time. Dcedpszlqgvefx Apmop

Condition: excellent (used), Year of construction: 2024, operating hours: 5,400 h, functionality: fully functional, A scrap shear (Lefort Trax 650) in excellent condition is for sale. Dcsdpsz Ak Dvofx Apmep Viewings can be arranged by appointment. The machine is available immediately.

Condition: used, Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, cutting force: 800 t, total width: 6,400 mm, total length: 18,500 mm, total height: 4,600 mm, overall weight: 153,000 kg, year of last overhaul: 2024, Hydraulic scrap shear Taurus In very good condition. Dcsdpfx Aezudwajpmjp

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, bale width: 300 mm, bale height: 300 mm, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Dodpsy Tlzasfx Apmjcp

Condition: excellent (used), Year of construction: 2023, operating hours: 1,500 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Dodpfx Apeuu Upgjmscp Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for economical scrap cutting: - simple automatic operation - Energy-saving - Cost-saving - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

Condition: excellent (used), power: 160 kW (217.54 HP), fuel type: diesel, color: blue, Year of manufacture: 2023 Design year: 2023 Operating hours: 35 Drive: Wheeled Number of cylinders: 6 Unladen weight: 33,800 kg CE marking: yes Technical condition: very good Visual condition: very good FUCHS MHL 350 MATERIAL HANDLER 2023 Model – UNUSED DEMO UNIT Deutz engine, 160 kW Boom reach: 16 m, boom: 8.5 m, stick: 7.2 m Hydraulic hose burst protection on the boom Cab: Hydraulic cab elevation, Fuchs Fox Cab Air conditioning Superstructure: Standard Fuchs color Central lubrication system Undercarriage: Mobile, 4 outriggers 8 new solid rubber tires, 12.00-20 Lighting: Various lights on the boom, stick, and cab Technical data Number of cylinders: 6 Fuel type: Diesel FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE OUR VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINERY OFFERED FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH Dcjdpjyiuqhofx Apmop WE SPEAK SPANISH

Condition: used, Year of construction: 1988, operating hours: 6,422 h, 1988 | Caterpillar 613C | Used Scraper | 6422 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 48 inspection points 38 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Immediately ready for use, with excellent starting and engine behavior. The machine runs very well overall; a minor leak was detected in the rotary drive of the shield - typical for devices of this construction year. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41097 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Dodpfx Ajzzz T Eopmjcp 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: - Length: 11.42 m Dcodpfexdnn Iex Apmjp - Width: 2.20 m - Pressing force: 80 t - Bale/channel dimensions: 110 x 80 cm - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.

Condition: like new (used), Year of construction: 2012, operating hours: 1,800 h, functionality: fully functional, total width: 2,500 mm, total length: 13,000 mm, total height: 3,000 mm, pressure: 630 bar, Equipment: cooling unit, We offer this like-new Moros 630 hydraulic shear, manufactured in 2012. Manufacturer: Moros Model: 630 Dcodpezua Sgefx Apmsp Year of manufacture: 2012 Condition: Like new Type: Hydraulic shear If you have any questions or need more information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 586, ΜΟΝΤΕΛΟ- C/A4 SCIVOLO 70 ΕΤΟΣ ΚΑΤΑΣΚΕΥΗΣ - 2006 ΑΡΙΘΜΟΣ ΠΛΑΙΣΙΟΥ - 586 ΤΥΠΟΣ ΜΗΧΑΝΗΣ - DIESEL Dsdpfx Apeu Nvhzemjcp

Condition: excellent (used), fuel type: diesel, color: blue, = Additional Options and Equipment = - Central lubrication system = Further Information = Model year: 2019 Drive: Wheeled Number of cylinders: 6 Unladen weight: 37,000 kg Body brand: FUCHS MHL 350 CE certification: yes Technical condition: very good Optical condition: very good FUCHS MHL 350 MATERIAL HANDLER Model year 2019 CE certificate Deutz 6.1 L6 Tier 4 Final EPA 160kW engine Boom reach 16 m, boom 8.5 m, stick 7.2 m Dcsdpjyhzpfsfx Apmop Boom hose rupture safety device Cab: hydraulic cab elevation, Fuchs Fox Cab Air conditioning Superstructure: Standard Fuchs color Central lubrication Undercarriage: Mobile, 4 outriggers 8x new solid rubber tires 12.00-20 Lighting: various lights on boom, grab, and cab General Information: Type: Bridge crane Model year: 2019 Color: Blue Technical data Number of cylinders: 6 Fuel type: Diesel Gross weight: 37,000 kg Emission class: Stage IV FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINERY OFFERED FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: repair required (used), functionality: not functional, Year of construction: 2000, operating hours: 50,000 h, machine/vehicle number: L00620269, Replaced LASMAC LC-1212 x III laser machine, not working could be renovated or would be suitable for spare parts and dismantling for scrap. Dedpfxow Dqt Ns Apmscp

Condition: used, The SAMO slitting line, 2001 processes material up to 1,000 mm wide and is integrated with the PROMEC packaging line, 2019. (N19). Installed electrical power is 451 kW; Area 365 sq Meters Capabilities include: Coil Inside Diameters: 400 / 500 Coil Outside Diameter: 1,500 mm Strip width: Entry: 350–1,040 mm Exit: 20–1,020 mm Thickness: 0.3–3.0 mm Line Direction; Left to Right Siemens S7-400 PLC Installation includes: Coil Stand- 3 Coils Uncoiler with Snub Control Roll Motor: 26.5 Kw DC Edge Control, EMG Paper Winder Peeler Table Pinch Roll Crop Shear Vollmer Contact Thickness Gauge, Slitter Head Djdpfx Aez Iq U Nspmscp Motor Drive: 72Kw, DC 400 Volt Edge guiding with automatic adjustment before slitting head Horizontal guide rolls before slitting head Shaft OD: 180mm Slitting Knives OD: 280mm Scrap winder Edge guiding at exit Rotating tooling turnstile on rails – 4 sided with 2 arms per side Pit with Pit Car Tension stand: Tension stand on linear rails Material table with horizontal and vertical position 4 horizontal guide rolls – pneumatically engaged 3 Roll Tension bridle roll system as material break Bridle roll motor: 138kW DC Crop shear Material table Re-coiler: Full hydraulic drum Overhead separator arm Motor: 190kW DC drive Ground level L-Shape coil car with overhead hold down arm 4 – arm coil turnstile with push-off arm (5) Above ground Coil Cars All hydraulics and Controls PROMEC Packaging line: (See below) Underground coil car in front of Turnstile Scale PROMEC PACKAGING LINE, 2019 Layout Code: N19 Automatic packaging system serving the SAMO slitting line. Installed electrical power: 65 kW. Processes strip widths from 40–200 mm and thicknesses from 0.2–3.0 mm. Siemens S7-400 PLC First table: Tilting table with mandrel for coil handling Signode Strapping Machine Overhead Manipulator- Horizontal Coil Handling with expanding mandrels into ID or 3 arm OD clamping Packages eye to the sky or eye to wall. All hydraulics and Controls

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Dodpfx Apjzn Rdmjmecp Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: refurbished (used), Year of construction: 2019, operating hours: 20,000 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap Shear MS-6300e (scrap shear with electric motor), supplied without operating fluids. Model: MS-6300e Dedpfx Apex Tp H Hemecp Cutting force: 630 t Cutting length: 1600 mm Discharge height: 600 mm Power: 110 kW Capacity: 12–17 t/h Machine weight: 40 t Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy-saving - Cost-effective - No foundation required Function: Scrap is fed into the intake area using an excavator. Due to the horizontal loading area and the self-weight of the scrap, the material falls into the loading chamber and the cutting area. The scrap is compressed against the front wall and is cut by the horizontally moving tool carriage, pressing the material over the blades mounted on the front wall. While the tool carriage moves horizontally, the processed material is pushed out through the blades at the front end of the chamber. When returning to the rear position, the loaded scrap moves by gravity into the shear. The scrap shears are available in various configurations according to customer requirements, and the output size can be customized (with new orders). Inspection and test operation are possible.

Condition: used, Year of construction: 2009, machine/vehicle number: 3122 102 024, functionality: fully functional, operating hours: 24,000 h, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: DC, cutting height (max.): 150 mm, cutting width (max.): 150 mm, control type: NC control, pivoting range: 60 °, actuation type: electric, total height: 1,880 mm, total length: 3,270 mm, total width: 1,200 mm, overall weight: 2,500 kg, table height: 1,050 mm, Equipment: CE marking, documentation/manual, lighting, Description Dcodps Agv Thefx Apmop This KASTO KASTOflex F metal cutting circular saw was manufactured in 2009. It weighs 2500 kg, operates on 400 V, and features automatic feed, a scrap collection bin, and a coolant system. It can perform straight and miter cuts up to +/- 60°. The machine was in operation until two weeks ago (October 15, 2026), is fully functional, and is available for immediate pickup. Documentation is available.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, cutting force: 650 t, - Machine in very good technical and optical condition, fully refurbished - CAT engine - Cutting force: 650 tons - Semi-mobile Dodpfxjy Ncqwe Apmscp - Filling bed: 7m

Condition: new, Year of construction: 2026, container length: 6,500 ft, We offer you high-quality skip loaders with mutually angled outer walls. Volume up to 40 cubic meters. Designed for the scrap and demolition industry, made of wear-resistant special structural steel HB450 HARDOX®. ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We exclusively use “original” HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to verify the “authenticity” of our products!!!! --- FINANCING --- RENT-TO-OWN --- LEASING --- -possible, please contact us!- Heavy-duty design for use in the scrap and demolition industry. Dimensions: 6500 x 2300 x 2400 mm 7000 x 2300 x 2400 mm Other sizes available upon request. Dcodpfx Apszg Iu Tsmep Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Cross member: INP 180 Mounting bracket Ø 60 mm, hook height 1,570 mm -Floor made of 5 mm HARDOX® HB450 -Side walls 3 mm HARDOX® HB450 -End profile made of 5 mm Strenx® 700 special edge profile -Rear and center spars made of 5 mm Strenx® 700 special edge profile -Rear door locking system Model Holland + safety lock -Lateral central locking -All-round tarpaulin and net hooks -Access ladder at the front, galvanized -Primed once inside, double-coated outside -Double-coated outside in a single color according to your desired RAL Optionally available on request: -Cross member UNP 220 = 22t design -Roll tarp -Steel cover with winch / hydraulics -Access ladder on the rear door -Additional spars / belly band -French door -Swing door -Grain slide

Condition: excellent (used), Year of construction: 2008, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 30762, spindle speed (max.): 3,000 rpm, type of input current: three-phase, total length: 10,000 mm, total height: 2,000 mm, total width: 5,000 mm, table length: 3,100 mm, drilling capacity: 40 mm, drilling depth: 130 mm, workpiece weight (max.): 7,500 kg, Plasma cutting machine for metals Manufacturer: Ficep Year of manufacture: 2008 Serial number: 30762 Technical specifications: Maximum workpiece width: 3,100 mm Minimum workpiece width: 400 mm Minimum workpiece length: 1,900 mm Maximum workpiece length: 6.4 m Maximum material thickness: 130 mm Maximum drilling diameter: Ø40 mm Maximum workpiece weight: 7,500 kg Plasma source: Hypertherm HPR260 Spindle speed: 180–3,000 RPM Dedpoz Inhgefx Apmscp Minimum workpiece size: 200 × 150 mm Equipment: Complete line with motorized roller conveyors for feeding and removing material Approximate length of feeding conveyor: 8 m Approximate length of removal conveyor: 5 m Includes a wide conveyor for removing metal scrap.

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, machine/vehicle number: REFLEX 36290, This is a fully functional machine that will be ready for delivery in December 2025. It includes a loading table - it has dimensions of 6000 * 2500 mm. The length of the chamber is 6000 mm. The expected status as of December 31, 2025 will be approximately 8,800 hours. The machine is located at: U Panelárny 461, Předměřice nad Labem. Dedjwhnbfspfx Apmjcp

Condition: good (used), Year of construction: 2015, Joni OP200 electric steam jacketed mixing kettle 2015, DC Norris / Joni OP200, stainless, 200L with agitation and scrap surface, perfect for cooking and mixing stocks, soups, sauces, preserves, pastry fillings and more, can either use tap or tilt to discharge, 3Ph Dodpfjy Umz Rox Apmocp

Condition: good (used), Year of construction: 2013, Joni OP300 electric steam jacketed mixing kettle Dcsdpfxjy Um Abo Apmjp 2013, DC Norris / Joni OP300, stainless, 300L with agitation and scrap surface, perfect for cooking and mixing stocks, soups, sauces, preserves, pastry fillings and more, can either use tap or tilt to discharge, 3Ph

Condition: used, Caterpillar MH3024 material handler, year of manufacture: 2018, operating hours: 10,735 h, liftable cabin, central lubrication system, reversing camera, 4x outriggers, German machine, first owner, immediately ready for operation! Attachment: Dcedpfxeyfr E Uj Apmjp Sorting grab = €5,000 net Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! Central lubrication system, quick-change device, rental possible. = Further information = Year of manufacture: 2018 Operating hours: 10,735 Drive: Wheeled Please contact Tobias Ebert for further information.