Used Screwdrivers for sale (97)

Condition: good (used), WSM Stationary Screwdriving Unit Screwdriving Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with tumbler(interlock). The doors are locked in automatic mode and can only be opened in automatic mode or in manual mode after pressing the Doors button on the control panel. Automatic mode cannot be started when the door is open. Function sequence The station is loaded with the pre-assembled module via the transfer conveyor. The operating steps of the automatic station with the passage of a WT are described below. In normal operation, all 3 stations work in parallel. Psdpeibichjfx Ah Usha - Positioning of the WT with the preassembled assembly in St.2.1 - Lowering of the beam with the scanners and the vision sensor - Scanning of the 3 codes (front panel, front LP, SD LP), comparison with the database - Checking the correct latching of the FFC in the connector - Lifting the carrier and lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in St.2.2 - Positioning of the screwdriver and screwing of the front LP - Lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in pc.2.3 - Lowering of the light protection cover and contacting, positioning of the carrier with the test sensors from below - type-dependent testing of the SD + CD lighting slots and pushbuttons - Function test CD eject button - Lowering the WT onto the conveyor > continue If faults occur during the test, they are indicated on the display and can be rectified if possible. To do this, switch to manual mode and open the doors. After the repair and starting of the automatic system, the WT is tested again in the station. If no repair is possible (e.g. screw fault), the WT is marked as NOK in the control system and is not processed further. Manual NOK marking and ejection is also possible.

Condition: used, Handling Device, Handling System JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp Phjdpfxefgpfmj Ah Usa - Movable in three axes (horizontal, vertical, rotatable) - KÜBLER rotary encoder for rotation, type 8.5873.5320.B311.S003 - BALLUFF linear transducer for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - For weightless suspension of small devices - Stepwise adjustable load capacity - Constant pulling force Required space (L x W x H): 770 x 310 x 1200 mm Dead weight: 19 kg Good condition

Condition: new, empty load weight: 390 kg, maximum load weight: 910 kg, overall weight: 1,300 kg, loading space length: 2,300 mm, loading space width: 1,500 mm, loading space height: 300 mm, Product information "UNSINN WEB-HK2315-13-10 1300kg 230x150x30cm rear tipper with PUMPless" Rear tipper from trailer manufacturer Unsinn. Made in Germany! The WEBHK2315-13-10 single-axle high-loader is a rear tipper. Easy to load thanks to its foldable and removable aluminum side walls. The load can then be tipped manually using the hydraulic system. A welded base frame makes the tipping trailer very stable. Phsdpfxjq Rvcqj Ah Uoa This car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, a support wheel, lashing eyes, a welded, hot-dip galvanized steel frame, and a sturdy V-drawbar. Accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, load securing net and supports are also available for an additional charge.

Year of construction: 1997, condition: excellent (used), 6 head ZALKIN cap screwdriver. Type - CA6 320 NG. - Machine number - 23334. - For 40mm PET bottles. - Capacity - 6000 pcs. I the hour. Year - 1997. Operating hours - 5000 hours. NERD. 6 head ZALKIN cap screwdriver. Type - CA6 320 NG. - Machine number - 23370. - For 28mm plastic bottles. - Capacity - 6000 pcs. I the hour. Year - 1997. Operating hours - 5000 hours. NERD. Phjdpfx Ajixmcdoh Uea We have 2 pcs. ZALKIN capsule screw machines in stock. Have more pictures of it we can send over email. Price is per. machine!

Condition: ready for operation (used), Posco 500 Desoutter Easy Line Screwdriver Screwdriving System Year of manufacture: 2008 6 bar Phjdpexfzz Rofx Ah Usa You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive an official invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. The mentioned company names and trademarks are property of their respective owners and are used solely for identification and description of the products. Deviations from the technical specifications as well as errors in the item description may occur and are reserved.

Condition: used, Year of construction: 2006, functionality: fully functional, Stabbearbeitungszentrum by STB-Graff, fully functional with integrated screwdriver for fastening steel reinforcements, for processing water drainage slots, handle holes in steel, lock cases, cylinders, door lock processing, etc. Psdjw A Ax Ispfx Ah Usha

Condition: excellent (used), Desoutter CVI II Controller with angle screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle screwdriver : 01C11200 CVI II Controller From simple start-up operations to complex sequencing applications - with up to 20 phases and 250 cycles - for optimum speed, accuracy and operator comfort with every connection. The controller has various interfaces, including an Ethernet port, an RS232 port and 7 logic inputs and 8 logic outputs (24 volts). The CVI II controller can be used to control a hand-held power tool from the ER series or a stationary screwdriving spindle from the EM series. Phodpfx Ahewxv Hke Uea It is important to note that the CVI II can also be used in combination with a transducer-controlled angle screwdriver such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" output. Memory capacity Between 2,500 and 8,500 tightening results per station depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening strategies - Torque and angle monitoring - Angle and torque monitoring - Torque and angle monitoring - Torque and angle rate - Predominant torque - Yield strength - Standstill torque - Torque and angle - Detection of the plastic zone of the joint - Additional torque and angle sensors - Self-tapping - Current monitoring Connectable tools: Angle screwdriver / rod screwdriver / gun screwdriver

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Podpfx Aehxvu Eoh Ujha Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: new, empty load weight: 560 kg, maximum load weight: 2,040 kg, overall weight: 2,600 kg, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, tire size: 165r13, Product information "UNSINN WEB-HK2715-26-13 2600kg 276x150x30cm rear tipper with PUMPless" Rear tipper from the manufacturer Unsinn. Made in Germany! The WEB-HK2715-26-13 high-loader rear tipper can be easily loaded from the side and rear with a forklift or by hand thanks to the foldable and removable aluminum side walls. The load is tipped back out using manual hydraulics. A welded subframe makes the tipping trailer very stable. Phedpfxsqv Ec Hj Ah Uea The car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, an automatic support wheel, lashing eyes, a welded, hot-dip galvanized frame, and a very stable V-drawbar. Trailer accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, net and supports are also available for an additional charge.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Cutting and machining center for PVC frame profiles and mullion profiles. The machine consists of a loading magazine, saw module, G-module for PVC processing, cross table for manual insertion of steel reinforcements, screwing module with an automatic underscrewdriver, drilling module for dowel holes, longitudinal saw for mullion profiles, and outfeed table with hand screwdriver for the strike plates. Phsdjxbdnrjpfx Ah Usa Available end of September 2025.

Condition: excellent (used), Year of construction: 2021, Manufacturer: Emerson Macchine Torino Model: Carrera 700 Year of manufacture: 2021 Specification: Table size: 1,320 x 320 mm • X - Y travel: 1,000 x 290 mm • Z table travel: 400 mm • Spindle-to-table distance: 140 - 540 mm • Spindle-to-column distance: 200 - 550 mm • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M16 • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2 / 1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard equipment: Phodow Ew Dwepfx Ah Uoa • Automatic tool screwdriver • Gearbox • Horizontal spindle • Automatic feed on axes • Automatic quill feed • Cooling unit • Lamp Main features: • Three-axis digital readout (Z with head movement) • Tapping attachment (reverse unit) • Table guard Accessories: Documentation Tool Please submit inquiries by email only. All information provided to the best of our knowledge. Subject to error. This offer is directed exclusively to businesses within the meaning of § 14 BGB. Sale is made excluding any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller, or for injury to life, body, or health. For further information, please refer to the Witzenmann GmbH website under the keywords "Impressum", "AGB" and "Datenschutz".

Condition: ready for operation (used), Year of construction: 2022, An assembly line (workpiece carrier assembly system) item Bayern GmbH for loading, assembly, and (return) transport of workpiece carriers with two Deprag screwdrivers is available. Assembly principle: Karakuri (non-driven material flow principle), max. load: 30kg, max. stroke: 2630mm, max. speed: 1.63m/s. Assembly station dimensions X/Y/Z: approx. 12850mm/3350mm/2950mm, weight: approx. 1600kg, lift system dimensions X/Y/Z: approx. 9700mm/3350mm/1600mm, weight: approx. 400kg, control: item C3-05. The system is modularly adjustable at any time and complies with standardized industrial standards. Documentation available. An on-site inspection is possible. The system is dismantled. Phjdjw Dfhnepfx Ah Uea

Condition: excellent (used), Pneumatic screwdriver PT72 2000 Nm System Norbar Mod. 18033, PT72, NP 4985 € Condition: Used. Shipping package up to 12 kg. Further articles - new and used - can be found in our shop! Phodpjfhqmbjfx Ah Uoa International shipping costs on request!

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 300 Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Handyflex projection: 275 to 765 mm Projection from frame: 725 mm Phedpfogbpuhsx Ah Usa Rotation radius at full projection: approx. 135° Height of mounting plate above floor 1250 to 1650 Vertical guide pillar: Ø 30 mm Horizontal guide pillars: Ø 20 mm Mounting plate for tool holder: 305 x 90 - Can be moved in three axes (horizontal, vertical, rotatable) - Rotary encoder BAUMER type GI355.022C315 for rotary and horizontal movement - Balancer for vertical movement - Adjustable load capacity - for weightless suspension of small appliances - Ball bearing guide in all axes - mounted in a frame made of BOSCH system aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Space requirement L x W x H: 1450 x 1250 x 2480 mm dead weight: 180 kg good condition

Condition: new, Year of construction: 2025, functionality: fully functional, DOBOT Collaborative Robot CR5AS The CR5AS features a repeatability of ±0.02 mm and a five-stage, adjustable collision detection system. The intelligent interaction panel provides quick access to the drag-to-teach function. Equipped with SafeSkin for pre-collision detection, the CR5AS enables efficient human-machine collaboration. Weight: 25 kg Maximum payload: 5 kg Working radius: 900 mm Maximum reach: 1096 mm Rated voltage: 48 V DC Maximum linear speed: 2 m/s Communication interface: Communication: RS485; Controller I/O: DI 16, DO/DI 16, AI/AO 2; ABZ incremental encoder: 1; Repeatability: ±0.02 mm Communication: TCP/IP, Modbus, WiFi IP protection class: IP54 Temperature: 0° to 50° C Phjdjw I S Dpopfx Ah Uoa Power: 150W Materials: Aluminum alloy, ABS plastic Application scenarios: Loading and unloading Assembly Bin picking Gluing Quality inspection Screwdriving Transport

Condition: excellent (used), functionality: fully functional, Armature Screwdriver Powasert ADS SE 1 - Automatic screwdriving Psdpfx Aow H Dzljh Uoha - Depth control shut-off - Automatic screw feeding - Pneumatic clamping device - Machine stand - Support roller conveyor with right support leg - Support roller conveyor with left support leg

Condition: used, Exhibition machineDescription:The new ZSX-TWIN Ec carpentry chainsaw is the practical solution for large-dimensioned wood components. MAFELL has created a new dimension with the development of the twin-engine chain saw, with which previously almost impossible and time-consuming work can be implemented effortlessly and accurately. With a rated power of 3000 watts, even one CUprex motor brings the 230 V mains to its power limit. Two CUprex motors at the same time would bring any simply fused lighting power supply to its knees. If the power is distributed over two circuits, the two-motor ZSX gets the power it needs. This is precisely the power grid that offers us, since here the phases are fused separately from each other and the grid is therefore not antage Benefit:Thanks to the use of light current technology, the ZSX TWIN weighs only 20 kg with 6,000 watts of rated power. This enables it to make longitudinal cuts up to a cutting depth of 400 mm! In wood construction and solid wood wall cutting, corner cuts are often necessary. Thanks to the vertical cutting tool, cutouts and overlaps can be made quickly and accurately. Time-consuming turning of the wood components is no longer necessary. At the heart of the ZSX-TWIN Ec are the two 3,000-watt luminous flux motors. They are operated in parallel on two 230 V phases from the power grid. The ZSX can be swiveled from -15° to 60° exactly according to lication:Longitudinal and cross-sectional cutouts Material use e.g.: Solid wood, glue laminated beamsTechnical data:Cutting depth 400 mm Cutting depth at 15° 386 mm Cutting depth at 30° 346 mm Cutting depth at 45° 282 mm Cutting depth at 60° 199 mm Swiveling on both sides -15° - 60° Cutting width 6.8 mm Rated idle speed 21000 1/min. Nominal input 2 x 3000 W Weight 20,0 kgScope of delivery:1 Chain saw ZSX TWIN Ec 1 Longitudinal cutting chain TWIN HM 400 No.: 006977 1 Fine cutting chain HM 400 No.: 006972 1 Transport carriage ZSX-Twin Ec No..: 205940 1 Glider for guide bar insert No.: 205934 1 Rip fence No.: 204591 1 Combination screwdriver 6 mm No.: 093272 1 Open-end wrench 13 mm No.: 093008 1 Connection cable 10 m complete with CEE plug 400 V No.: 087906 Pedpfx Ahsvwfy Ss Uoha

Year of construction: 2017, condition: as good as new (ex-display), machine/vehicle number: 6151550180, Demonstration tool: hydraulic high torque wrench LP2 from TITAN without link Torque range: 363 to 2476 Nm Downforce: suitable for screwdrivers (wrench size SW 19 to SW 60) Links are optional and not included Pedpfsdv Scfox Ah Uoha Weight: depending on the cassette from 2.56 to 3.16 kg Total length with cassette: 226.1 mm Total height: 31.8 mm Advantages: -Patent Multi Axen connection: Freely movable hose, multi-positioning of the hose -Flat design: Fits easily on all tight spots - Unique broad-gauge teeth -Modular concept Characteristics: -Certified accuracy +/- 3% -The Titan WIDE Track ratchet-tooth design distributes the force evenly, it provides a larger contact surface and thus brings the power to solve the-bolt case perfectly - every time - Handcrafted from the highest quality aviation materials for ultimate strength and durability (AQ Grade 7075-T6 Alloy) - Low profile and flat design for extremely tight spaces

Year of construction: 2003, condition: good (used), Schatz Advanced Screwdriving Unit  Schatz screw machine Length: 5450 mm Height: 3000 mm Unwinding stand Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist  1 x Schatz 907500 Installation without Advantech TPC-1260 TE Touch Panel PC Phjdpeihiiiefx Ah Uoa More screwdriving machines in other sizes - new and used - can be found here.

Condition: used, Feeding technology / feeding system / vibratory feeder / sorting unit / bowl feeder Vibratory bowl, sorting device / screw feeding with vibratory feeder for screwdriving applications Feeding system DEPRAG Type: 0622-P/0.75-1S No.: 1183884 Year: 2011 - 2012 The unit was used for feeding contact pins for electrical connectors. Product dimensions: Ø 4 mm, length 26 mm The pins are stocked in the material hopper; the conveyor belt transfers the pins as required into the bowl feeder. The bowl feeder, equipped with two sorting tracks, delivers the pins to the product turner. The product turner orients the product to the desired position and releases it for further processing. The unit comes from a prototype system. External electrical control is not included and should be provided by a PLC. Without modification, also suitable for automatic and correctly oriented feeding of threaded studs up to M4 x 26. The unit consists of the following components: Phsdpfx Ahsh Ap Ids Usa 1 pc. belt hopper / feeding conveyor DEPRAG Type: B 10 Serial no.: 1178200 Order no: 415050A Year: 2011 Filling volume: 10 liters Belt speed: 100 mm/min Operating voltage: 24 Volt (DC) - Belt surface: profiled - Foldable stainless steel chute Weight: 11 kg 1 pc. bowl feeder vibratory bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm - Bowl feeder with two sorting tracks and two product outlets Operating voltage: 230 Volt, 50 Hz. 1 pc. DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Production no.: 35 pcs. FESTO product turner with 180° swivel range - 1 FESTO valve terminal CPV10-GE-MP-8 - 1 FESTO valve terminal CPV10-VI - Special pneumatic components (compressed air supply approx. 6 bar) - 2 pcs. MURR base modules type MVP12 - Complete unit mounted on a steel plate with 4 support feet Dimensions L x W x H: 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: new, Year of construction: 2025, functionality: fully functional, DOBOT Collaborative Robot CR3AS Psdpfjw I Syqjx Ah Uoha The CR3AS features a compact design for rapid deployment in confined spaces. Equipped with SafeSkin for collision detection, the CR3AS enables efficient human-machine collaboration. Weight: 25 kg Maximum Payload: 5 kg Working Radius: 900 mm Maximum Reach: 1096 mm Rated Voltage: 48 V DC Maximum Linear Speed: 2 m/s Communication Interface: RS485 Controller I/O, DI 16, DO/DI 16, AI/AO 2, ABZ Incremental Encoder 1 Repeatability: ±0.02 mm Communication: TCP/IP, Modbus, WiFi IP Protection Class: IP54 Temperature Range: 0° to 50° C Power: 150 W Materials: Aluminum alloy, ABS plastic Application Scenarios Loading and unloading Assembly Bin picking Adhesive application Quality inspection Screwdriving Material transport

Year of construction: 2016, operating hours: 10 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 09/2016 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Phsdjvtf Arjpfx Ah Uea Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Ser.- No.: 03611 Year of construction: approx. 2000 Cup diameter bottom: 300 mm Pot diameter top: 350 mm Inner pot height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 230 Volt, 50 Hz - The conveyor was used for feeding automotive fuses Space requirement: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear conveyor / vibratory conveyor / sorting device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Ser. No. 00835 Year of construction: approx. 2000 Maximum rail length: 700 mm Usable weight: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 220 Volt, 50 Hz - Swing plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Height with oscillating plate 145 mm Space requirement: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibratory drives, control unit, controller, control system for vibratory conveyors / sorting device / bowl feeder / vibrating bowl / vibratory feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 Veff; (230VAC in motor operation) at 230V mains voltage 0 ... 98Vrms; (115VAC in motor mode) at 115V mains voltage Output voltage: 0...208 V (rms) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Circular conveyor, linear conveyor max. 10A adjustable Output 2: Circular conveyor, linear feeder max. 6 A adjustable Total load current: 16 Aeff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max 60 mA Sensor delay ON: 0 ... 8 sec. Pjdpsuzn Nnjfx Ah Usha Sensor delay DOWN: 0 ... 8 sec. Power output connection: Hirschmann 7 pol. - Two power outputs - Sensor amplifier with independently adjustable time stages (On / Off) - Soft start (internally adjustable) - External enable input 24VDC Space requirement: L x W x H: 260 x 190 x 140 mm Control unit weight: 3.6 kg All devices tested and in good condition

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Phsdpfxefx Hyfo Ah Uoa Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Pneumatic screwdriver, straight screwdriver for screwdriving technology Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Rotary switch for clockwise and counterclockwise rotation (rotary ring control) - Without screwdriver switch-off - Compressed air control line Ø 4 mm - Compressed air connection for screwdriver function min. Ø 10 mm - Aluminum holder for handling device - Screw feed Ø 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg good condition Pjdpfx Aefgrrhoh Usha 4 pieces available, price per screwdriver