Used Section Bender for sale (3,209)

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Ljdpfx Aez Hckmoh Sjru Availability Immediately. Location: Belgium.

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum section for suctioning the material to be conveyed -Belt width: 250 mm -Conveyor length: 2460 mm Lredpfx Ajz Ehd Njh Sju -Drive shaft: Ø 30 x 100 mm -Individual components: see photos -Dimensions: 2460/470/H300 mm -Weight: 152 kg

Condition: used, maximum load weight: 37,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment list. Complete equipment available upon request. Gooseneck * with angled front corners approximately 45° and rear slope approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick, extendable loading platform Loading platform * extendable design with rear slope approximately 1,000 mm x 8° * 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, diamond plate flooring over the axles Kingpin supports * JOST kingpin supports (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Tires * 235/75 R 17.5 3PMSF * TPMS: TPMS tire pressure monitoring system according to ECE R 141 * Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. * For correct display, the tractor unit must be able to transmit and display this data. Axles * BPW axles and suspension, 2 fixed axles, 1 steerable axle * Technical axle load: 12,000 kg each * Electro-magnetic parking brake activated via reverse gear and manually Air suspension * with lifting and lowering valve Braking system * in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Lsdpjz N Nwysfx Ah Ssru Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting * Complete steel construction automatically blasted with a shot blasting system after welding * Second blasting with corundum for optimal adhesion of the coating system * Final painting with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red * in accordance with the RAL system 841GL * Rims in silver gray * Rear section metallic and in RAL 9010 (pure white) * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical system * in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pole sockets in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Included accessories * Axle tool * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * Mounting in the rear area of the gooseneck for aluminum loading ramps * Galvanized folding supports under the slope of the loading platform * One mounting for warning signs on the gooseneck and on the rear panel, left and right * including socket loadometer for determining the axle loads including load diagram * Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized locking strips are removable. (Length of the superstructure approx. 2,560 mm) * A toolbox galvanized, integrated in the angled gooseneck * 3 pairs of WADER container pockets in the loading platform for a 20' (30') or a 40' cont

Condition: new, maximum load weight: 39,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list Complete equipment list available upon request. Equipment: * Gooseneck with beveled front corners at approximately 45° and rear bevel of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick. Loading platform: * with rear bevel of approximately 1,000 mm x 8° * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings, located horizontally at the front of the loading platform, for (LC 10,000 daN) * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond-plate flooring over the axles. Kingpin: * JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Axles: * BPW axles and suspension, 2 axles rigid, 1 axle with trailing arm steering * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually Air suspension: * with lifting and lowering valve Tires: * 235/75 R 17.5 3PMSF – manufacturer of our choice * TPMS: TPMS tire pressure monitoring system according to ECE R 141 Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Steel construction: * made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Lredpfxjz Rr R Sj Ah Sou * according to EU regulations * Lighting: 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: * Complete steel construction automatically blasted with a shot blasting machine after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint build tested in a salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front bulkhead, approximately 400 mm high * A spare wheel holder in front of the bulkhead * Mounting rail for aluminum loading ramps on the gooseneck with integrated impact protection (± 56 kg) * Galvanized folding supports under the bevel of the loading platform * A mounting bracket for a rotating beacon on the rear of the trailer * On the gooseneck and rear panel, on the left and right, a mounting bracket for warning signs including socket * Load indicator to determine the axle loads including load diagram * 1 pair of recessed lashing rings along the center beam at the rear in the bevel (LC 10,000 daN) * Additional fastening option for the license plate of the trailer at the rear right of the trailer Incl. special accessories: * Aluminum sideboards and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvan

Condition: used, Closes bags automatically in line Ledpjz Nc Uwsfx Ah Sjru The Leximat ASM 60 takes over the neck of filled bags with guide belts, twists it together and closes it, with no operator needed at the machine. That makes it a good fit behind a weigher or filler for bread, vegetables, fruit or other bagged goods. The machine is built entirely in stainless steel with a guard over the closing section and is operated from a touchscreen. Servo drives control the movements. We did not find a rating plate with the year. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Automatic bag closer (in line) Drive: Servo motors Controls: Touchscreen Construction: Stainless steel, with guard over the closing section

Condition: used, mileage: 323,040 km, power: 265 kW (360.30 HP), first registration: 01/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 01/2027, color: yellow, gearing type: automatic, emission class: euro5, loading space length: 6,450 mm, loading space width: 2,500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), MAN TGS 35.360-TRIDEM-LIFT AND STEERABLE AXLE-VARIOUS STORAGE COMPARTMENTS-ALL-ROUND LIGHTS-AUTOMATIC TRANSMISSION-DIFFERENTIAL LOCK-ENGINE BRAKE-IN EXCELLENT OPTICAL AND TECHNICAL CONDITION!!!, FOLDABLE CRANE BEHIND CABIN, HIAB XS 144E3 HIDUO, LOWER CONTROLS, REMOTE CONTROL, 3X HYDRAULIC OUTLETS AT 10M40/1240KG, 5/6 CONTROL CIRCUITS FOR GRAB AND ROTARY SERVO. SPECIAL BODY BEHIND CRANE: LOWER SECTION, 10,000-LITER WATER TANK WITH HYDRAULIC PUMP, PRESSURE/RETURN, HYDRAULIC WINCH AT THE REAR, 6M45X2M50X60CM-UPPER SECTION, OPEN PLATFORM WITH STEEL FLOOR AND TIE-DOWN POINTS, 6M45X2M50X40CM. EXTRA DIESEL TANK FOR SWITCHING TO RED DIESEL. SPECIALIZED VEHICLE!!! Ljdpoz H Trbofx Ah Sjru PRICE FOR EXPORT.

Condition: excellent (used), Year of construction: 1999, CHAIN FILTER Maximum filter capacity : 30.000 m3/h ATEX Approved 4 x Dust extraction Fans, 15 Kw each. ( All 4 frequenz controlled ) Filter measures : L 6700 x W 2400 x H 4200 mm ( Without legs : H 3300 mm, will fit on a low truck in 1 section ) Cross air unit included Lrsdpfoz R Eh Dex Ah Ssu Filter + fans has always been located inside, so the condition is very good.

Condition: good (used), Tool grinding machine, grinding machine, angle grinder, turning tool grinding machine, steel grinding machine -Elysier grinding: possible with the machine -Speed: 1500 rpm -Grinding wheel: Diamond grinding wheel -1x angle tables: 220 x 310 mm -Angle adjustment: 15° to -5° -Oscillation: 0-35 mm -Water cooling with: electrolytes -Grinding dust extraction Lrjdpodz U Tlsfx Ah Ssu -max. steel cross-section: mm -Number: 1x grinding machine available -Price: per piece -Dimensions: 850/700/H1400 mm -Weight: 580 kg

Condition: good (used), mileage: 118,000 km, fuel type: diesel, color: blue, mast type: telescopic, Year of construction: 2013, operating hours: 13,800 h, Details - Manufacturer: Grove - Type: GMK 4080-1 mobile crane - Chassis number: W09080430DWG12042 - Year: 2013 Specifications - Engine: Mercedes-Benz - Kilometers: approx. 118,000 km - Undercarriage hours: approx. 4,100 h - Superstructure hours: approx. 13,800 h - Max. lifting capacity: 80,000 kg - Max. operating pressure: 300 bar - Main boom / 5 sections: 51 m - Hydraulic jib: 21 m - Drive: 8 x 8 x 8 - Tires: 445-95 R 25 Ledezy Rh Aopfx Ah Soru - Tare weight: 48,000 kg Accessories: - 1 x 1-sheave hook - 1 x 3-sheave hook = Further information = Year of manufacture: 2013 Tare weight: 48,000 kg Boom length: 51 m Lifting capacity: 80,000 kg Superstructure manufacturer: Grove GMK CE marking: yes Technical condition: good Optical condition: good Price: On request

Condition: repair required (used), Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Ljdjy D Nicopfx Ah Sjru Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: new, Schmersal TD 250-10/10Z-T Limit Switch with Roller Plunger New mechanical limit switch in a robust design with a cast iron housing and roller plunger for industrial applications. Manufacturer: Schmersal Type: TD 250-10/10Z-T Article number: 101058132 EAN: 4030661031019 Actuating element: Roller plunger Operating principle: Mechanical Switching principle: Incremental switching Housing material: Cast iron, galvanized and painted Number of contacts: 2 contact elements Lrjdpfx Asz Rv Eyeh Ssu Cable entries: 2 × M25 × 1.5 Connection type: Screw connection Maximum connection cross-section: 2.5 mm² Degree of protection: IP67 Ambient temperature: -40 to +200 °C Rated operating voltage: 400 V AC Rated operating current: 4 A Thermal continuous current: 16 A Rated insulation voltage: 400 V Rated impulse withstand voltage: 6 kV Maximum switching frequency: 3,000 switching cycles/h Mechanical life: At least 10,000,000 switching cycles Maximum operating speed: 3 m/s at a 30° vertical approach angle Dimensions (L × W × H): 125 × 146 × 257 mm Gross weight according to the manufacturer: 4,364 g Standard: EN IEC 60947-5-1

Condition: used, Year of construction: 1990, Technical details: total power requirement: 1,5 kw weight of the machine approx.: 110 kg electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Exhaust air: flexible hose Ø 150mm to approx. 5 meters Operation via on/off switch Lrsdpfx Asu Nv Dpjh Seu *

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75            ONLY 3,800 hours 1 x SEMKO side caliper with reject 6 x section feeders 1551 1 x cover folder feeder 1528 Lsdov Ap Iwspfx Ah Ssru 1 x three knife trimmer 1565 1 x stream delivery 1564

Condition: used, mileage: 829,800 km, power: 302 kW (410.61 HP), first registration: 01/2020, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 9,600 mm, total width: 2,550 mm, total height: 4,000 mm, loading space length: 7,359 mm, loading space width: 2,496 mm, loading space height: 2,505 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, SCANIA G410 – ACC – RETARDER – LIFT – FULL AIR SUSPENSION – VEHICLE HISTORY * 1ST OWNER * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST ----Vehicle Data* Scania G 410 B6x2?4NB * First Registration: 27.01.2020 * Mileage: 829,800 km * 3-Axle Truck * Axle Configuration: 6x2 * Vehicle Class: N3 * Euro 6 / EURO VI D * Diesel * Top Speed: 90 km/h Engine & Transmission* 12.7-liter Diesel Engine * 6-Cylinder Inline Engine * 410 hp / 302 kW * Automatic Transmission / AMT * 12 Gears * Retarder * Differential Lock Chassis & Axles* 3 Axles * 3rd Axle Steerable * Air Suspension * Lift Axle * Wheelbase Axle 1-2: 4,750 mm * Wheelbase Axle 2-3: 1,350 mm Axle 1* Tires: 385/55 R22.5 * Air Suspension Axle 2* Twin Tires * Tires: 315/70 R22.5 * Air Suspension Axle 3* Lift Axle * Tires: 385/55 R22.5 * Air Suspension Body & Chassis* Interchangeable Chassis * 400-Liter Tank * Storage Compartment * Trailer Coupling * Pneumatic Trailer Brake System * Forklift Attachment at the Rear Assistance Systems* ACC – Adaptive Cruise Control * Lane Keeping Assist * Traction Control (TC) * Hill Start Assist * Hill Descent Control Cab & Comfort* Heated Seats * Electric Windows * Heated Side Mirrors * Leather Steering Wheel * Multifunction Steering Wheel * Automatic Climate Control * Auxiliary Heater * Refrigerator Ledjzz Efrepfx Ah Sjru Infotainment* Scania Infotainment Premium * Navigation System Weights* Permissible Total Weight: 26,000 kg * Technically Permissible Total Weight: 27,000 kg * Technically Permissible Gross Vehicle Weight: 60,000 kg * Permissible Trailer Load (Braked): 24,000 kg Dimensions* Vehicle Width: 2,550 mm * Permissible Vehicle Length: up to 12,000 mm ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS NUMBER PLATES AND 15 DAYS AUSTRIA NUMBER PLATES EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU & third countries, a deposit of at least 500.00 € / 1,000.00 € will be charged. Subject to change, errors and prior sale! More vehicles can be found on our Sale is exclusively according to our GTC - see homepage Important Note - Important Information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal Note: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2014, next inspection (TÜV): 01/2027, loading space length: 13,630 mm, loading space width: 2,580 mm, loading space height: 2,730 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 7,330 mm, Equipment: ABS, KRONE SD – PR. + PL. – SAF – 2X PALLET LOADS – VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST ----Vehicle Data: Make/Model: KRONE SD DA06CLNF (Semi-trailer, Side Curtainsider) * First Registration: 09/2014 * Vehicle Class: O4 (Trailer > 10 t) Dimensions: Internal Dimensions: 13.63 m (L) x 2.58 m (W) x 2.73 m (H) * External Dimensions: 13.86 m (L) x 2.55 m (W) x 4.00 m (H) Weights: Permissible Total Weight: 39,000 kg (technical) / 36,000 kg (approved, Germany) * Unladen Weight: 7,330 kg Ledpfx Ahj Aaukls Seru * Payload: approx. 28,670 kg * Support Load: 12,000 kg Axles & Brakes: 3 Axles, SAF Axles * Air Suspension * Disc Brakes * Axle Load: 3 x 9,000 kg (technical) / 3 x 8,000 kg (approved) Tires: 385/65 R22.5 160J (all axles) Equipment: Spare wheel holder * Storage box * Pallet box 2x on both sides Approval & Inspection: Next MOT: 01/2027 * EC Type Approval: e12007/460232 EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS REGISTRATION, AND 15 DAYS AUSTRIAN REGISTRATION EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU and non-EU countries, a deposit of at least €500.00 / €1,000.00 will be charged. Changes, errors, and prior sale are subject to change! You can find more vehicles on our website. Sale is exclusively subject to our general terms and conditions – see homepage. Important Note – Important Information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, mileage: 575,000 km, power: 375 kW (509.86 HP), first registration: 06/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2027, brakes: retarder, color: grey, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGX 18.500 XXL – RETARDER – STAND-UP AIR CONDITIONING – FULL CAB – NEW TACHOGRAPH – FIRST OWNER – ACCIDENT-FREE – FULLY ROADWORTHY – ----VEHICLE HISTORY * FIRST OWNER * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * XXL CAB MAN INDIVIDUAL * AUTOMATIC TRANSMISSION * RETARDER * SPEED LIMITER * DISTANCE CONTROL (ACC) * LANE KEEPING ASSIST * BLIND SPOT ASSIST * STAND-UP AIR CONDITIONING * STAND-UP HEATER * AIR CONDITIONING * ON-BOARD COMPUTER / NAVIGATION * FULL CAB * XENON HEADLIGHTS * DIFFERENTIAL LOCK * REFRIGERATOR * 1 X BERTH * FRONT AXLE: LEAF SPRING SUSPENSION * REAR AXLE: AIR SUSPENSION * 2 X TANK * ADBLUE * TIRE SIZE: 385 / 55 R22.5 * REAR: 315 / 70 R22.5 * VERY GOOD TIRES Lodpfx Ahj Aaukrs Sjru * VEHICLE DRIVES AND SHIFTS SMOOTHLY, NO WATER LEAKS! * VEHICLE IS FULLY ROADWORTHY ----EXPORT / REGISTRATION * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000. EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) * 5-DAY LICENSE PLATE * 15-DAY LICENSE PLATE * 30-DAY LICENSE PLATE * 15-DAY AUSTRIAN LICENSE PLATE * EURO 1 * TECHNICAL DATA SHEET VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. FOR SALES TO EU AND NON-EU COUNTRIES, A DEPOSIT OF AT LEAST €500.00 / €1,000.00 WILL BE CHARGED. SUBJECT TO CHANGES, ERRORS AND PRIOR SALE! YOU CAN FIND MORE VEHICLES ON OUR WEBSITE: -TRUCKS.DE. SALES ARE EXCLUSIVELY SUBJECT TO OUR TERMS AND CONDITIONS – SEE WEBSITE. IMAGE NOTE: INDIVIDUAL VEHICLE IMAGES MAY HAVE BEEN DIGITALLY PROCESSED. INSCRIPTIONS, LOGOS OR LICENSE PLATES MAY HAVE BEEN REMOVED OR MADE UNRECOGNIZABLE. IMPORTANT NOTE: DESPITE CAREFUL CHECKING OF ALL DETAILS IN OUR OFFER, ERRORS MAY OCCUR. THESE ARE PARTLY CAUSED BY TRANSMISSION ERRORS IN THE SYSTEMS OF THE VARIOUS PLATFORM PROVIDERS. THEREFORE, WE WOULD LIKE TO POINT OUT THAT ALL INFORMATION IS WITHOUT GUARANTEE AND DOES NOT CONSTITUTE A LEGAL CLAIM. LEGAL NOTICE: THIS SALES ADVERTISEMENT DOES NOT CONSTITUTE AN OFFER WITHIN THE MEANING OF SECTION 145 OF THE GERMAN CIVIL CODE (BGB). IT IS RATHER INFORMATION FOR THE CONCLUSION OF A CONTRACT. THE INFORMATION PROVIDED HERE IS WITHOUT GUARANTEE AND THEREFORE DOES NOT CONSTITUTE GUARANTEED PROPERTIES.

Condition: used, Technical details: Lrodpfxju Icdyo Ah Ssu sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm *

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm Lrjdou Ick Tepfx Ah Sou electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools Punches and dies i.D. *

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Lodpfxjy E Hyno Ah Soru Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: not inspected (used), functionality: unexamined, Year of construction: 1994, machine/vehicle number: 7099, overall weight: 2,000 kg, total length: 5,600 mm, total width: 700 mm, total height: 1,600 mm, TRANSFLURID DB 2060 pipe bending machine - Bending capacity: 20 - 60 mm Lsdpez Sprcsfx Ah Seru FCA D-35614 Aßlar - loaded onto a truck.

Condition: excellent (used), power: 224 kW (304.55 HP), fuel type: diesel, color: white, lifting height: 67,200 mm, mast type: telescopic, Year of construction: 2011, General Information Year of manufacture: 2011 Technical Details Number of cylinders: 6 Drive: Wheeled Unladen weight: 49,000 kg Functional Lodpfxowudhbe Ah Ssru Mast: Telescopic (4 sections) Mast length: 67.2 m Lifting capacity: 130,000 kg Superstructure make: TEREX RTC-130-02 Condition Technical condition: very good Visual condition: very good

Condition: excellent (used), Wide-belt sanding machine KÜNDIG Premium for finishing coats Type Premium 1 1100-C - used - constant working height thanks to adjustable upper section, combined unit with contact roller and sanding pad, contact roller with rubber coating, pneumatic activation of the contact roller, Lrjdezkvd Ropfx Ah Ssu electronic segmented sanding pad, digital display for sanding height, automatic thickness adjustment, infinitely variable feed rate, automatic carpet centering, operation via touchscreen, belt cleaning, air-sprung sanding pad, sanding belt oscillation, workpiece cleaning via compressed air nozzles, table extension at the infeed and outfeed, finishing coats possible ----- Technical data ----- Working width: 1,100 mm, Number of belts: 1 piece, Sanding belt speed: 3 - 15 m/sec., Feed rate: 3 - 15 m/min., Segment width sanding pad: 22 mm, max. workpiece thickness: 205 mm, min. workpiece thickness: 3.5 mm, Dust extraction port Ø: 180 /120 /100 /100 mm, Motor power: 11 kW, Dimensions (LxWxH): 1,660x1,700x2,250 mm, Weight: 2,150 kg Quality information: - Belt run / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked - Complete thorough cleaning - Electrical system checked - Ready for immediate use

Condition: used, Inlet cross-section: 1,600 x 1,200 mm Lrodpfxebq Sugs Ah Sou Drive power: 2 x 45 kW Blade width: 55 mm Number of blades: 56, bolted Rotor diameter: 655 mm Planetary gearbox

Condition: used, machine/vehicle number: #14199, Rotor diameter: 800 mm Lrodpfx Asz Svb Djh Sou Rotor width: 1000 mm Number of rotor blades: 7 Number of stator blades: 3 Inlet cross-section: approx. 900 x 1000 mm Drive motor: 110 kW

Condition: used, machine/vehicle number: #14195, Rotor diameter: 457 mm Rotor width: 1500 mm Lrjdpfxjz Svcbe Ah Sou Number of rotor blades: 102 Number of stator blades: 2 Inlet cross-section: approx. 1500 x 1500 mm Drive motor: 75 kW