Used Seed Drill Combination for sale (8,349)

Condition: used, Year of construction: 1999, According to our "General and stipulated Terms and Conditions" without any guarantee & warranty, we can offer you today, subject to confirmation until completion, errors, typographical mistakes & prior sale excepted, the following vehicle: Väderstad Rapid RD 600 P Seeder Year of manufacture approx. 1999 approx. 10,000 ha ID No. 917 pneumatic seed drill Spacing 15 cm PTO drive Control terminal Gsdpfxsxchhfs Ag Neuh pneumatic seed drill Blower via PTO Pre-marker Harrow Performance monitor hydraulically foldable good condition Price: € 8,000.00 (net) All information without any guarantee or warranty. Our "General and stipulated Terms and Conditions" apply. Jurisdiction for both parties up to a disputed amount of € 5,000.00 is the district court of Ludwigslust, for higher disputed amounts, the regional court of Schwerin. Errors, typographical mistakes & prior sale excepted.

Condition: used, Year of construction: 2024, AMAZONE Cirrus 6003-2 Trailed seed drill combination Year of manufacture 2023, demo machine in use Approx. 170 hectares of mileage Equipment: Single-chamber hopper with 3600 liters Quick hopper emptying LED lighting Chassis swing Short telescopic drawbar with CAT 3 drawbar Dual-circuit air brake Godpfxjv Aqurs Ag Njuh Tire packer with 12 Matrix tires 48 mounted discs, 460 mm finely serrated Stone remover Tramline segment Track width 1.80 m Electric half-width control 36 TwinTec plus coulters Control plus 65 depth control rollers Electronic coulter pressure remote adjustment Harrow set 6000/166 Comfort hydraulics ISOBUS operation Radar sensor AutoPoint Amatron4 Comfort package for Twin Terminal Bout marker Tramline marking Dispensing roller 660 cm Ridge clearer Scraper LED work lighting Blower drive with 6.2 cc hydraulic motor | Internal No.: 11165512

Condition: used, Empty weight: 9.000 kg Gjdpfx Agoxmh Adj Neuh Auction item. Seeder in working condition. Working width 6,000 mm.

Condition: used, Year of construction: 2022, working width: 1,800 mm, color: red, Empty weight: 624 kg Gusdpjwbkwiefx Ag Noh Required tractor power: 50 hp

Condition: used, Year of construction: 2011, Empty weight: 13.000 kg Guodpfxsxmhngj Ag Noh Auction item. Seeder in working condition. Working width 6 000 mm.

Condition: reconditioned (used), Year of construction: 2002, drill gomad WU 3G 2002 YEAR LIGNUM WU drills Drill WU 3G 3 TOP UNITS Flexible task drills with adjustable spacing of top, side, bottom and swivel drilling units equipped with multi-spindle drilling heads. Designed for drilling all kinds of holes. The modular structure provides many configuration options (working length, number of units, pneumatic clamps, etc.). They enable single- and multi-stage drilling and programming the operation of units depending on the needs. Feeding and receiving of the processed material is done manually. Other drilling functions are performed automatically (material pressure, simultaneous 3-sided drilling, pressure release). Spindle spacing scale according to the order 16 - 44 mm Distance between JC head units 250 - 2500mm Width of JG, JB, JC, JS units Gusdpsi Hqhfofx Ag Neh 160mm Unit feed cylinder stroke JG - 100mm, JB 100 (120mm) Maximum material width 200mm Maximum material thickness 50mm Maximum drilling diameter 35mm Spindle speed 3000rpm JB units spindle center height above table 6 - 35mm (55mm) Drilling unit engine power 1.1 kW Duration of one-stage and two-stage cycle 4 - 6 sec and 6 - 10 sec Air pressure required 0.4 - 0.6 MPa Compressed air demand 2 m3/h per drilling unit Type of feed drive pneumatic with stepless speed regulation Supply voltage 400V, 50Hz Overall dimensions (L x W x H) 2200 - 4000 x 1500 x 2000mm Weight 2500 - 3000 kg Contact the advertiser Przemyslaw Kretowicz is online lignum 602 Show number

Condition: new, Year of construction: 2025, The combination of FTJ-1175 jaw track crusher and FTB-1550 scalper screen are stone crushing and screening systems, which are often used in quarries, mines and construction sites. This type of equipment is designed for crushing and screening of hard rocks. Here are the general features of these two FABO equipments combined and serve as a single line FTJ-1175 Tracked Jaw Crusher: - Capacity: Ideal for crushing hard rocks and stones with high capacity. - Mobility: Thanks to its crawler structure, it moves easily in difficult terrains. - Jaw Opening: Thanks to its wide jaw opening, it easily crushes large-sized materials. - Efficiency: It offers long-lasting use with its energy-saving engine and durable construction materials. FTB-1550 Tracked Scalper Screen - Screening Capacity: Suitable for pre-screening of large volume and coarse materials. - Dimensions: Features a 1550 mm wide screen system, allowing for larger material capacity. - Durability: With its wear-resistant construction, it can be used in heavy-duty operations. - VariousScreening Options: Different sizes of screens allow separation of various material sizes. Advantages of the Combination: 1. High Performance: Crushing and screening of the material is done quickly in the same system. Gusdpfx Ajvpf Rhog Njh 2. Mobility: The crawler structure provides portability and offers the possibility of use at different sites 3. Operational Ease: Integrated operation on a single line saves labour and time. 4. Various Applications: Suitable for quarries, recycling plants and large-scale construction projects. With impressive crushing capacity, reduced operating costs, and simple maintenance, this combination is a reliable, high-performing solution for any project FABO’s innovative technology guarantees exceptional efficiency and performance, giving your projects a strong competitive edge.

Condition: used, Year of construction: 1996, 6-row maize drill / single grain drill / Gujdpfoqrrrvsx Ag Njh

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD Gedpfexmvm Rjx Ag Njuh OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21271 Specifications: Extended feed bar, for 14 foot first rod, effective drilling length of 4.2 mp 1 rod. Hose reel construction for better hose handling Upgrading hydraulics for better capacity and energy efficiency Rod handling with 1 rod, drill length up to 7.5 meters New radio control New control system In-cab display for pressure adjustment and monitoring Directional instrument and meter counter Gsdsxatp Aepfx Ag Nsuh HC25 hammer Rod shifter Ready for delivery   Description: We have a Montabert micro drill rn significantly upgraded w/ hc25 hammer and rod changer for sale. The tower has been significantly upgraded to function as it should. The feed beam has been extended to accommodate a 14 foot 1-rod. Which effectively makes the drilling length 4.2 mp 1-rod. Rod changer for 1 rod (12 feet) increases drilling length to 7.5 m. Compressor hydraulic valve can be included for an additional price. The tower is ready for delivery. Own weight: 1 Model: micro borretårn

Condition: good (used), Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter Gusdjv H D N Rspfx Ag Nsh -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Condition: ready for operation (used), Voortman VB1250 lintzaag kap: 1250 x 500 mm versteksnede +/- 60°: 1000 x 500 mm versteksnede +/- 45°: 850 x 500 mm versteksnede -30°: 500 x 500 mm zaagsnelheid: 40 120 m/min vermogen: 7,5 kW Afmetingen lintzaag: 11.000 x 54 x 1,6 mm Voortman V630 drievoudige boorunit 2 horizontale boorunits 1 verticale booreenheid elke unit heeft een automatische gereedschapswisselaar met 5 posities spindel: SK40 (koeling via spindel) boordiameter: 8/40 mm boorsnelheid: 0 2000 tpm draadtappen: M8/M24 profielhoogtemeting inbegrepen middelpuntmarkering inbegrepen nummermarkeringseenheid inbegrepen 18 meter invoerrollenbanen 6 dwarstransportbanden van 4 meter lengte maximale breedte: 1050 mm cap: 400 kg/m max positioneringsgewicht: 9 ton Roltransportmeetsysteem = onbeperkte meetlengte Vacon 110 CNC-besturing Hydraulisch aggregaat 4kW - 160 bar Godpfswlkwwox Ag Njuh

Condition: good (used), Year of construction: 2002, functionality: fully functional, throat depth: 300 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 31 rpm, drilling capacity: 50 mm, stroke length: 250 mm, spindle mount: MK 5, drilling depth: 250 mm, table width: 500 mm, table length: 500 mm, rotational speed (min.): 31 rpm, rotational speed (max.): 1,400 rpm, overall weight: 1,200 kg, thread cutting capacity: M 36, Drilling capacity: Ø 50 mm Threadcutting capacity: M3 - M33 Spindle nose: MK-5 Spindle speeds: 31,5 - 1.400 rpm Spindle feeds: 0,10 - 0,14 - 0,20 mm/rev. 0,28 - 0,40 - 0,56 mm/rev. 0,80 - 1,12 - 1,60 mm/rev. Spindle stroke: 250 mm Table size: 500 x 500 mm Throat: 300 mm Gsdpoxk Uw Nefx Ag Nsuh Motor power: 4 kW Machine LxWxH: 87 x 110 x 270 cm Machine weight: 1.200 kg

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec Gsdpfstnh Alsx Ag Nsuh MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: new, Year of construction: 2025, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Guodocnxa Sepfx Ag Njh Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21250 Specifications: Gjdpfxjw Ucm Us Ag Neuh 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Own weight: Engine hours: 5520 Model: 712HC-01

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm Gjdpsxm Rzijfx Ag Neuh -Weight:157 kg/piece

Condition: new, FACTORY-NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis travel: 4,000 mm Z-axis travel: 1,500 mm Y-axis (cross-ram): 1,300 mm V-axis (cross column): 1,000 mm Guedpfx Agsq I Nkbo Neh Rotary table (C-axis): 2,000 x 2,000 mm Max. load capacity up to 15,000 kg Automatic universal swiveling head 1° x 1° (optionally with fixed ram Ø 210mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-position chain magazine (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimetric guarding (open at top) Only inquiries from Germany will be processed.

Condition: good (used), Year of construction: 2001, functionality: fully functional, throat depth: 360 mm, spindle speed (max.): 1,270 rpm, spindle speed (min.): 68 rpm, total height: 2,350 mm, drilling capacity: 40 mm, total width: 600 mm, total length: 900 mm, stroke length: 200 mm, spindle mount: MK 4, drilling depth: 200 mm, table width: 500 mm, table length: 500 mm, rotational speed (min.): 68 rpm, rotational speed (max.): 1,270 rpm, overall weight: 650 kg, Drilling capacity: Ø 40 mm Spindle nose: MK-4 Spindle speeds: 68 - 1.270 rpm Spindle feeds: 0,10 - 0,20 - 0,30 - 0,40 mm/rev. Spindle stroke: 200 mm Table size: 550 x 550 mm Throat: 360 mm Country of origin: Spain Motor power: 2,2 kW Machine LxWxH: 900 x 600 x 2.350 cm Machine weight: 650 kg Guedpfx Aoxizb Sjg Noh

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Model - LCWS. ✅ Serial - SO-22949/1/19. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Gusdpexd Thmsfx Ag Njh Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: as good as new (ex-display), Year of construction: 2025, minimax c 26g TERSA - multiple combination for sawing, milling, planing-thicknessing. The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system. Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel infeed roller for constant workpiece infeed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Particularly low noise Table planer The milling unit has two speeds for flexible tool use. The machine is equipped with a finely adjustable bow cutter for profiling. With the aluminum slide tenoning is possible without any problems. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The changeover from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee the smoothest running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Miter fence with one folding stop Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26g TERSA Article no. 5500027 Cutting length 1200 mm Cutting width with rip fence 500 mm Max. Cutting width left of saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm sliding carriage length 1140 mm Format sliding carriage width 201 mm Height of sliding table 70 mm Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Cutterblock type TERSA Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 mm Thicknessing table width 260 mm Thickness working height min. 3 mm Location: Ex stock 54634 Bitburg - immediately available - Gedpfxodqzh Ts Ag Neuh

Condition: used, Year of construction: 2010, operating hours: 3,030 h, Please contact ATS Norway for more information Please provide reference number upon request: 18549 Specifications: Model year: 2010 Guedpfx Ajvgy E Ujg Nsh Hours: Approximately 3030 hours Power: 55 kW Weight: Approximately 8000 kg Chassis: See pictures Belt width: Approx. 40 cm Engine: Deutz diesel engine Undercarriage commutation Winch Hydraulic water pump Remote control Toolbox Stabilizing legs Description: 2010 Comacchio MC500 drilling rig with only 3030 hours on the counter. The rig works as it should, but is missing an emergency stop wire. It can drill both horizontally and vertically, and is delivered quickly. Hours: 3030 Own weight: 8000 Total Weight: 8000 Kw: 55 Model: MC 500

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V Guedpjir E Snefx Ag Noh -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Condition: new, BRAND NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 digital contouring control Godpfxjq I Nlye Ag Nouh HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 2,000 mm Y-axis (cross-ram): 1,500 mm V-axis (cross-column): 1,000 mm Rotary table (C-axis): 2,195 x 2,195 mm Max. load capacity up to 20,000 kg Automatic universal swivel head 1° x 1° (optional with fixed quill Ø 210 mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-position chain magazine (vertical/horizontal change) Double-hinged chip conveyor (longitudinal) Perimetric enclosure (open top) Only inquiries from Germany will be answered.

Condition: used, Combined Machine FELDER BF6-26 -used- Gedpjxlt Shofx Ag Neuh Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm