Used Semi Automatic Flute Laminator for sale (29,152)

Year of construction: 2022, condition: new, functionality: fully functional, Completely new machine, packed. Did not suit our room since it is not installable two ways. Bought from KATOMSK AS Bodpfx Asyrb Swol Uedg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6153102135, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102135, excellent condition, very little used, it is delivered with the roller from the pictures Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Bdodovyl Dvepfx Al Ujg Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 15.428 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102136, excellent condition, very little used, it will be delivered with the two rollers from the pictures. Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt, DC. Upon request other voltages at additional cost. Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Bdsdpfxjvyl Ihj Al Ujg Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 16.456 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2012, condition: excellent (used), easyFrame is a semi-automated solution for canvas framing, by Imaging Solutions AG. It can process to 50 frames per hour (depending on the operator). Machine is exellent state. It has frame mounts to produce stretchers from 8x6 to 43x43 inches canvases. Bdedpfjn Ut Hcjx Al Usg

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-speed, high-safety, OHS compliant saw. A420 is a simple to use saw for small-profile cutting of straight or mitered aluminium parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Bdjdpfxjmb U Tbj Al Ujg Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum chip extractor Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor Bdedpfx Asmb U Tusl Uog • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the timber you may need to cut. Suitable for bundle-cutting many timbers at once and with high-precision. High-precision timber processing with PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture Bedpjmb U T Ujfx Al Uodg • Aluminium retail sales

Condition: new, Year of construction: 2026, Supercharge your timber cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the timber size you may need to cut. Suitable for bundle-cutting many timbers at once and with high precision. High-speed timber processing with high-powered motor and precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW dust vacuum extractor • Optional automated mitre control system Highly suitable for: Bsdpfomb U T Rjx Al Ujdg • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting

Condition: new, Year of construction: 2026, Skyrocket your steel cutting productivity and eliminate strenuous labour associated with steel cutting with a semi-automatic saw based on precision servo-motor actuation. Automatic detection of the material placed to cut with the machine setting itself to the shortest cutting stroke needed without you needing to adjust any limit sensors. Automatic detection of saw motor overload and reverse to alleviate. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø400 mm HSS blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Semi-automatic cutting with adjustable saw feed rate and blade RPM (20-100) • Spindle and drive unit immersed in oil solution for smooth performance and long service life • Mitering locking device stops at 45° left straight 90° and 45° right • Industrial ball-screw actuator with servo motor control of the saw stroke • Auto-detect of the material size results in short stroke & cut times without user input Bodpfx Alsmcbk Rj Ujdg • Saw overload detection with feed modulation • Fully integrated flood coolant system • Every new unit comes with brand new HSS blade for ferrous cutting • Optional AS / NZS 4024:2014 safety guard with tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on press of a button • Safety switch disabling the saw operation when guard it up Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up Bedev Iccfepfx Al Ujdg • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: new, Year of construction: 2026, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. Bodomb U Tfjpfx Al Uodg High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Air gun and LED interior light Bsdpfx Alsmb U T Hj Uedg • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture

Condition: new, Year of construction: 2026, High-speed timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting Bedpfxjmcaahj Al Uodg

Condition: new, Year of construction: 2026, High-capacity timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.8 sec for a complete up-down saw motion. • Ø600 mm TCT blade with 11 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 600 mm on each side of the saw blade • Flat precision ground table, assuring cutting accuracy • Adjustable T-clamp, for material height variation • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 160-tooth saw blade included • Available in either right or left hand configuration to suit work flow Bedemcaawjpfx Al Usdg • Also available 455, 600, 762 and 914 mm diameter blade models Highly suitable for: • Retail timber sales • Doors manufacture • Pallets manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2026, Do you cut hardened or stainless steels on a cheap abrasive saw? Upgrade your production to a high-safety, PLC controlled, industrial hot saw. S200 is a semi-automatic abrasive (hot) cutting system designed for cutting stainless and hardened steels, as well as matrix-type materials like rubbers, threads, carbon fibre, which require high RPM cutting. Suitable for single or (bundled) multiple tubes cutting at once. Full pneumatic liftable guard (including tunnels 900 mm either side) preventing saw access and safely capturing all sparks from the cutting process. Opening and closing of the guard with a press of a button for a full unimpeded saw table access with safety switch disabling the saw on lifting of the guard. Saw cooling by forced air circulation and convection design. Optional vacuum extraction system for dust collection. • Ø200 mm abrasive cutting disc with 1.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • Precision machined and balanced high-RPM spindle and drive unit • Precision 90° cuts with smooth performance and long service life. • 2x vertical clamps with adjustable clamp pressure • Adjustable feed control of up / down cutting cycle. • Rapid blade changeover system minimising time. • Air gun and LED interior light • 1× Ø100 mm attachment points for dust collection • Optional 2.2 kW vacuum extractor Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Bsdpemcbk Uofx Al Usdg

Year of construction: 2025, condition: ready for operation (used), functionality: fully functional, Designed to perform high-precision slotting and die-cutting processes on cardboard sheets. Its semi-automatic system allows for a high degree of operator control. With a working length of 2800 mm, it is suitable for handling large parts, optimizing the manufacturing process of boxes and packaging. Bdodozugtqspfx Al Ujg Configuration: - Conveyor chain for indirect paper feeding - 40 mm lateral movement via gear transmission; replaceable and wear-resistant polyurethane rubber - Rollers with surface grinding, chrome plating, and precise alignment. Shaft cores made of 20# steel.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MzWf002, Equipment: Android Auto, CE marking, Chips Snacks Vertical Plantain Chips Peanut Nut Packing Rice Popcorn Potato Chips Sachet Packaging Machine .It is suitable for packing all kinds of grain material, sheet material,strip material which such ascandy,sunflower seeds,nuts,beans,potato chips,popcorn,dry fruit,vegetable salad (shreded or slicesvegetables,like iceberg lettuce.,cabbage,spring onion and leek ect.).frozen food.jelly.biscuitchocolate, corn, pet food, hardware and plastic can be weighed by the ration. Bdjdpoxu Uwqefx Al Ueg

Condition: used, Year of construction: 2011, functionality: fully functional, SEMI AUTOMATIC CASE MAKER MACHINE Bsdpfx Alow Inyto Ujdg DARIX EVOLUTION LIGHT

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Bsdpfxsxd Ubno Al Uodg Note 🗒️ No printer.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specifically designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Bsdpjzxggljfx Al Usdg Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm, and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand operated.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Specification 360/N Type Manual Laminator 360/N Application Laminating dry-film photoresist onto PCBs Max. panel width 635 mm Material thickness approx. 0.05 – 12.7 mm Laminating rollers 2, both driven Temperature control Thermoregulators for the laminating rollers Drive Adjustable transport speed Control PLC Compressed air Required for pneumatic functions Film Dry-film photoresist Design Manual laminator Bdedpfozum Afex Al Usg Manufacturer/documentation Duesse / Shipley, Rohm & Haas

Condition: good (used), IML DA 900 Rigid Box Automatic Wrapping Machine This machine is practically new. Year of manufacture: 2016. Application: Wrapping veneer on a box. Made in Italy. This automated machine is designed for forming solid board boxes by wrapping veneer on a solid board box. This is the latest version of the machine, with a PLC controller. Technical specifications: Bedpfx Aezw Ty Nel Usdg Max size: 430mm x 350mm x 120mm Min size: 60mm x 60mm x 10mm Version thickness: 100-175gsm Weight: 900kg Power supply: 230V The set includes two tool palettes for producing standard boxes. The molds are primarily made using 3D printing technology.

Condition: good (used), CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine The machine is fully operational and ready for production. Like new. This highly efficient creasing system is ideal for the production of binders, hard covers, and more. Bsdpfx Alezw Typs Usdg Made in Italy. Sheet feeding is manual, while the machine handles the rest automatically. An automatic feeder can also be added (optional). Parameters are set from the control panel and jobs can be saved to the machine’s memory. Materials processed range from 200 GSM to 4 mm cardboard. Sturdy construction, weighs 750 kg. Adjustable creasing and counter-creasing widths. Stepper motor control. Fast operation, up to 2400 sheets/hour. Sheet size: 750 x 1400 mm. Two sheet guides with an extended table and pressure rollers. Quick machine format conversion in less than 1 minute. Receiving table included.

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Bdsdpfxjzv Niws Al Ueg Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: used, Year of construction: 1985, Offer 25425 Technical Data - Motor-driven top roll: 175 x 30 mm - Bottom rolls free-running: 250 x 50 mm - Top roll adjustable via handwheel - Top roll diameter: 175 mm - Bottom roll diameter (each): 250 mm - Throat depth: 1100 mm - Distance from base plate to bottom roll: 1520 mm - Drive: 400 V - Required space approx. W 900 x H 2650 x D 2000 mm - Weight approx. 1500 kg Bdjdex T Urhepfx Al Uog