Used Separator for sale (5,962)

Condition: good (used), Year of construction: 1985, functionality: unexamined, total width: 2,100 mm, total length: 4,150 mm, total height: 1,100 mm, overall weight: 7,200 kg, type of input current: AC, 2 pieces electromagnetic overband magnetic separators. 1 piece is overhauled ! Manufacturer: SKET Magdeburg Type: EMHB 1200 / 1700-L Psdsu Imz Nspfx Ah Ujha Connection cable: 7,0 kW Weight: 7200 kg Dimensions Length: 4100 mm Width: 2100 mm Height: 1100 mm For conveyor belt systems with a belt width of up to 1200 mm. Belt speed up to a maximum of 2.09 m/s Automatic cleaning The electromagnetic overbelt magnet with automatic cleaning is installed above the conveyor belt and enables quick and easy separation of magnetic particles from the conveyed material. This separator is primarily used in applications with a high occurrence of ferromagnetic particles, where separation with manual cleaning would not be suitable due to the high level of contamination. Compared to permanent overband magnetic separators, the magnetic field of electromagnetic plates is much stronger and deeper. Electromagnetic magnetic separators are ideal for collecting parts with difficult shapes (such as screws, nuts, balls, etc.) and heavier iron parts. The extremely strong electromagnetic field also ensures the separation of ferromagnetic particles that are located under a higher layer of the flow. The electromagnet is also an exclusive solution for applications where it is necessary to deactivate the magnetic field for operational or maintenance reasons (which is not possible with the permanent magnet). Contributions of the separator application purified material (without ferromagnetic impurities) Permanent protection of technological systems continuous production operation automatic cleaning without interrupting the material flow minimization of operating effort and costs due to production downtime

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Suitable for max. compressor delivery volume 3.8 m³/min Phedov Ta D Dopfx Ah Uja (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Year of construction: 2016, condition: new, machine/vehicle number: DMPMP260x104x41,5, Plate magnet in NdFeB Neodymium version 260 x 104 x 41.5mm Pjdpec Tctksfx Ah Usha Completely welded housing 4 tapped holes M8x20mm Edge distance: 40mm -BHmax: 263-279 kJ / m³ Br: 1170-1210, JHc:> 955KA / m Maximum operating temperature: 80 ° C This is an overproduction which has not been accepted by the customer. More than 10 pcs.

Condition: new, New stepfeeder for wooden logs. it is possible to order a new one for your wood length and diameter specifically. Phsdpsukn H Dofx Ah Uea

Condition: like new (used), functionality: fully functional, Year of construction: 2016, Manufacturer: MB Conveyors Model: SM Year of manufacture: 2016 Drum hole diameter: 35 mm Psdewb Epgepfx Ah Uoha Technical condition: very good – as new!

Year of construction: 2022, operating hours: 2,896 h, condition: reconditioned (used), functionality: fully functional, Model: Lepton 2100 Year of Manufacture: 2022 Screening Hours: approx. 2896 hrs Engine Hours: approx. 3486 hrs Location: D 84069 Schierling Availability: short-term Equipment: - Base machine Lepton 2100 with Screen Deck 1 (optionally upgradable to a second screen deck) Screen Deck 1 spacing: 70 mm - Tracked undercarriage - Pre-screen deck with long hopper and accelerator belt Phedpjwlt N Nofx Ah Uja - Radio remote control for all key adjustments - Diesel-electric drive 80 kW - Level compensation - 18,500 kg total weight - Transport dimensions: 11.97 m overall length, 4.10 m height, 2.53 m width Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recycling materials (not suitable for construction debris or excavated earth) Other: Very good used condition, fully operational

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, GEA Niro Soavi 3206 L Separator Manufacturer: GEA Niro Soavi S.p.A. Model / Type: 3206 L Serial Number (S.N.): 3812 Year of Manufacture: 1999 Maximum Working Pressure: 150 MPa (1500 bar) Phodpfxjxb D S Ds Ah Uoa Nominal Capacity: 40 dm³/h (40 liters per hour)

Year of construction: 2019, condition: new, machine/vehicle number: 1C331151, Oil/water separator DONALDSON Ultrasep Superplus UFS-SP10Nominal compressor capacity (referred to 1 bar absolute and 20 °C, depending on compressor type and lubricant): 120 m³/h Connection: G 1/2 Volume of the container: 25 litres Volume of the preadsorber: 0,9 litres Phodpsdbwf Sefx Ah Usa Volume of eff. Activated carbon adsorber: 3,2 litres

Condition: ready for operation (used), 1) Electr. engine 5 kW Phedsiau S Depfx Ah Uea 2) Vibrating dispenser, 3) Original STADLER construction (approximately 12 tons) Everything works and is ready to work - to check on site. Video on demand. Location; Poland

Year of construction: 1993, condition: used, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. The unit is made of stainless steel. The extractor is suitable for outdoor installation thanks to a built-in heater that prevents water from freezing. Brand: Venti Oelde Model: RWA 400 15 Kw fan. Capacity - 8000 m3/h year of production : 1993 Inlet diameter - 400 mm Psdpfx Ahetixlbj Ujha Control cabinet with technical documentation included.

Condition: new, functionality: fully functional, Um Verunreinigungen zu entfernen, die die Lagerung oder den Verkauf von Getreide erschweren können, werden spezielle Reinigungsgeräte eingesetzt – sogenannte Separatoren. Diese Geräte sind für den Einsatz in kleinen und großen landwirtschaftlichen Betrieben konzipiert. Der Bediener kann die Fraktionsgröße individuell anpassen und verschiedene Getreidearten verarbeiten, darunter Roggen, Weizen, Sonnenblumen, Mais, Hülsenfrüchte oder Kaffeebohnen. Funktionsprinzip des Separators: Das Getreide wird in den Einfülltrichter gegeben, wo es sich gleichmäßig verteilt und durch sein Eigengewicht in die Separationskammer gelangt. Dort sorgt ein intensiver Luftstrom zunächst für die Abscheidung von schweren Verunreinigungen und Steinen, die in die erste Fraktion gelangen. Das gereinigte Getreide wandert zur nächsten Ebene weiter, während leichte Verunreinigungen und beschädigte Körner durch den Luftstrom auf das letzte Tablett transportiert werden. Staub und feine Partikel werden über den Luftauslass entfernt. Phjdpewi Sg Isfx Ah Uoa Durch Kalibrierung und Massenabscheidung wird das Saatgut optimal für die Aussaat vorbereitet, wobei die vollständigsten und gesündesten Körner ausgewählt werden. Dies führt zu einer höheren Gleichmäßigkeit, reduziert den Saatgutbedarf und steigert den Ertrag. Die Vorreinigung zielt auf die Staubentfernung und teilweise Beseitigung von Nicht-Getreide-Abfällen ab, was die Vorbereitung des Getreides für die Zwischenlagerung und weitere Verarbeitung beschleunigt. Technische Daten: Länge: 1700 mm Breite: 660 mm Höhe: 1590 mm Gewicht: 200 kg Leistung: von 0,5 bis 5 Tonnen pro Stunde Motorleistung: 0,18 kW Spannung: 230/400 V

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h Phjdpfx Ajrt Uvzsh Usa - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Very good used condition, fully operational

Condition: good (used), Year of construction: 2019, overall weight: 1,620 kg, total length: 31,280 mm, total width: 15,040 mm, total height: 20,900 mm, input voltage: 220 V, type of input current: AC, Sorting using color and image, Easy setup for different types of materials. With a capacity of up to 2 metric tons per hour, it is the ideal high throughput sorting solution for separating zinc gray metals, copper, brass and circuit boards. Podoq Ulw Rspfx Ah Uoha The extremely flexible, multi-sensor sorting unit can be programmed to create fractions for wires, seeds and non-metallic materials such as plastics. It offers a high return on investment for mixed waste, electronic scrap and metal recycling. You can see it in operation.

Condition: used, Year of construction: 1977, functionality: fully functional, power: 4 kW (5.44 HP), rotational speed (max.): 9,200 rpm, input frequency: 50 Hz, Westfalia centrifuge/separator type SA7-06-076 with control cabinet (electronic control) 9,200 rpm; year 1977, serviced annually; includes relevant tools, spare seals, and operating manuals. (Unit has been dismantled, cabling not included.) Ideally suited for mobile juice presses (lightweight, compact size, relatively low power consumption). Phsdew S Dqcspfx Ah Uja

Condition: good (used), functionality: fully functional, total length: 2,000 mm, total width: 850 mm, total height: 1,400 mm, Stripper/Casing remover is used to remove casings without damaging sausages Brand Townsend Model 2600 Dimensions 2000x850x1400mm Pedpfsv Aadvsx Ah Uoha

Year of construction: 2025, condition: new, functionality: fully functional, Equipment: CE marking, Comprehensive recycling lines | Screw conveyors | Intelligent feeding systems Phsdpfowx H Dgex Ah Usa — 📍 Who are we? We are a Polish manufacturer of machinery and integrated recycling systems. Our solutions are already in operation at many facilities across Europe. We specialize in the design, construction, and commissioning of complete process lines for the recovery of non-ferrous metals and plastics. — ⚙️ Our product range includes: • ATV series eddy current separators – both symmetrical and eccentric models • Screw conveyors (standard, progressive, inclined, dosing) • Big-bag feeding and unloading systems, feed hoppers, augers, feeders • Steel supporting structures, platforms, maintenance stairs • Integration of equipment into complete process lines with washing, flotation, magnetic separation, and drying systems — 🔍 ATV Eddy Current Separators – what do we offer? Our separator line includes over a dozen models with belt widths from 330 mm to 2200 mm, in two variants: • Symmetrical models (A) – classic design, ideal for glass, ASR, PET • Eccentric models (P) – greater separation precision, especially for fine metal fractions ATV separators are available in the following sizes: • ATV-40 to ATV-240 • Belt width: from 330 mm to 2200 mm • Rotor up to 4000 rpm (depending on version) • Drive: motors from 3.0 kW to 7.5 kW + belt drive motor • All equipment is CE certified We can tailor the separator to your material fraction, capacity, and line requirements. 🧠 In-house test center For clients who wish to verify the effectiveness of our solutions on their own material, we offer the opportunity to test it at our R&D and testing center in Poland. You can send your material (PET, glass, ASR, metals, e-waste), and we will select and configure the optimal parameters for the equipment—even before purchase. — 🏗️ Comprehensive solutions In addition to equipment supply, we offer: • Design and construction of complete turnkey installations • On-site installation and commissioning of equipment • Technical support and service • Possibility to integrate with existing lines or construct new ones from scratch

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,200 mm, total length: 1,200 mm, total height: 1,550 mm, overall weight: 270 kg, electrical fuse: 16 A, input voltage: 400 V, power: 7.5 kW (10.20 HP), drive type: Elektromotor, TUKWIND BASIC 7 add-on air classifier with special fan impeller and solid housing design. Our smallest suction fan is suitable for extraction at one suction point. Ideally suited for fine fraction cleaning, Styrofoam extraction, and small screening machines up to 4m drum length. - Optionally can be supplemented with our PUSH blowers to increase efficiency. - Easy expansion option as a spot extractor with 10m hand suction hose. Facts: - Compact separation system for mounting on existing screening technology (mobile & stationary) - High suction power - continuously adjustable thanks to built-in frequency converter - Electric drive, hence very low maintenance costs - 7.5kW power requirement; Power plug: 32A CEE (16A fuse sufficient) A wide range of applications is made possible by the robust construction and individual adaptation to conveyor belts, etc. Fields of application: construction waste recycling (Styrofoam, plastic films), composting (plastic films), RDF cleaning (plastics), and more. The device can be purchased either separately or as a complete set. The set includes all necessary accessories such as: extraction hood, hoses, bends, quick clamps, net, etc. Pjdpfx Ahswhfqwj Uoha

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order. Pjdjua Tbwopfx Ah Ujha

Condition: refurbished (used), Year of construction: 2007, operating hours: 3,892 h, Hello, I have a KOMPTECH HURRIKAN pressure separator for sale from 2007. The machine has been completely reconditioned as in the photo. It has an electric drive and a diesel engine. Pjdev Upakepfx Ah Ueha Engine power: 53 KVA Voltage: 400V 63A ID number: W0908016471KB4096 Weight 6.5t Worked 3892 mth

Year of construction: 2022, condition: new, The Cyclonic Dust Separator (cyclone) exploits the centrifugal and gravitational force to carry out the dedusting of the air flow. The tangential entrance of the machine forces the air to whirl around inside the structure. The contained dust loses speed due to friction with the external surface of the system and is separated thanks to the gravitational effect. The air is released in the central part in correspondence with a counter-duct which, creating a depression, attracts the air inside and allows it to escape. Podpfx Aoihu T Tjh Uoha

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 2,000 mm, total width: 1,600 mm, total height: 3,100 mm, input voltage: 400 V, input current: 14 A, input frequency: 50 Hz, SepaMatic separator with loading for 200 ltr containers Type: SEPA 1200 ST Phodpfx Ahovztpis Uea Voltage 400 V, 50 Hz, 14 A, Power 7 kW, Dimensions: 2000 mm x 1600 mm x 3100 mm Trolley with parts included

Condition: new, Year of construction: 2024, functionality: fully functional, Magnetic coolant separator MMA series, type MMA-100a Made in Poland by MultiMasz. Declaration of Conformity + manufacturer's warranty. MMA-63a transmitting capacity 63 l/min. MMA-100a transmitting capacity 100 l/min. MMA-160a transmitting capacity 160 l/min. MMA-250a transmitting capacity 250 l/min. Standard Voltage 3 X 400V/50Hz [other on request] Rotation speed of the drum 4,9 rpm Power 0,18 kW MMA separators are designed for work primarily on grinding machines, and other machines tools and devices with water-based coolants, or straight cutting oils, to extends the life cycle of machine tools and the cooling fluids. MMA Separator provides increased productivity with less downtime for machine coolant replacement. It is the best solution to perform the machining accurately due to the quality of the surface and the accuracy of the final dimensions. Phjdpfjuuinwox Ah Uea Shipping available all over the world.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 1,140 kg, electrical fuse: 63 A, input voltage: 400 V, drive type: Elektromotor, Attachment wind sifter TUKWIND PRO 18. The combination blower with suction and compressed air in one station. - Compact separation system for attachment to existing screening technology (mobile & stationary) Podpfx Aowhfgroh Ueha - High suction and compressed air performance – infinitely adjustable by built-in frequency converter - Electric drive, therefore very low maintenance costs - 18.5kW power requirement; power plug: 63A CEE A wide range of applications is enabled by the robust design and individual adaptation to conveyor belts, etc. Ideal size for drum screening machines of the 5-6m class: (SM518, SM620, T5, T50, T6, T60, MAXX, Nemus, Cribus 2800, Cribus 3800, and more) Fields of application: construction waste recycling (Styrofoam, plastic films, wood chips, hard plastic pieces), composting (plastic films), RDF cleaning (plastics), brick chipping cleaning, and more.

Year of construction: 2024, condition: new, functionality: fully functional, Description of Use: Overband Magnetic Separator (MAGNETIC series) is applied to loose materials to automatic removal of ferrous impurities in the process of waste recycling. Apart from metal recovery the Separator has a protective function for equipment in further steps of recycling process. They are usually installed on top of transport conveyors. Belt separators are used in many fields: -scrap removal from coal and aggregate -wood and plastic purification -iron particles recovery from cable shredding Phodpfx Aheh D H Rcj Uoa -iron rejection from WEEE recycling process -municipal waste purification Contact us for more information

Year of construction: 2016, condition: like new (used), The user-friendly key components of the CliniMACS Plus Instrument offer sophisticated applications for a whole variety of separations. The selected stem cells, monocytes, DCs, NK cells, B cells, and T cell subsets allow research in the field of regenerative medicine, adoptive immunotherapy, and graft engineering. Full system control by means of an integrated microcomputer Automatized cell separation by a magnetic separation unit including both a movable permanent magnet and a holder for the separation column A peristaltic pump to ensure continuity in flow rates throughout the tubing set Various pinch valves to support the peristaltic pump in managing the correct flow of buffer and cell suspension Cells are magnetically labeled in the Cell Preparation Bag using an antigen-specific reagent. Subsequently, the Cell Preparation Bag is connected to the CliniMACS Plus Instrument. Consumer-friendly software facilitates target cell enrichment or depletion as well as final collection in the Cell Collection Bag. The CliniMACS System separates large numbers of cells providing target cells with high purity and excellent yield. Pedpfx Aeiptzfjh Usha Good working condition. Please check out our other listings as well.