Used Shaft Furnace for sale (6,641)

Condition: used, Year of construction: 2021, machine/vehicle number: 902107, temperature: 250 °C, inner dimension length: 3,300 mm, inner dimension width: 2,900 mm, inner dimension height: 3,800 mm, total length: 10,800 mm, total width: 6,000 mm, total height: 7,700 mm, overall weight: 17,500 kg, fuel type: gas, Machine Data Weight: approx. 17,500 kg Oven Data Max. temperature: 250 °C Heating zones: 2 Usable Chamber Dimensions Width: 2,900 mm Height: 3,800 mm Length: 3,300 mm External Dimensions Width: approx. 6,000 mm Height: approx. 7,700 mm Length: approx. 10,800 mm Loading Max. payload (gross): 2,300 kg Performance Data Rated power: approx. 30 kW Gas burner output: 4 × 150 kW Gas pressure: approx. 150 mbar Technical Data Voltage: 3 × 230/400 V Frequency: 50 Hz Ambient Conditions Operation Temperature: +5 °C to +40 °C Humidity: < 75 % Max. installation height: up to 1,000 m above sea level Hfjdsy H I Rwspfx Apneg Transport and Storage Temperature: +5 °C to +40 °C Humidity: < 75 %

Condition: good (used), Year of construction: 1981, Chain width: 340 mm Hfodpoxiu Dmjfx Apneg Cutting height: 200 mm 2 x 45 kW motors Shaft diameter: 65 mm Electric height adjustment Feed speed variably adjustable via frequency inverter Includes an additional 3 saw bushings and many spacer rings Still ready for demonstration in a small business; technically flawless condition, but has not been in use for quite some time

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS hydraulic power unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, base/frame split for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Hfedpfx Apev Hr Nxensg

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, power: 2 kW (2.72 HP), filling opening width: 1,250 mm, filling opening length: 1,000 mm, overall weight: 1,300 kg, Technical data: Hopper opening: length x width 1250 x 1000 mm Length x width: 1250 x 1000 mm Cutting unit opening: 562 x 462 mm Feed opening: 1250 x 1000 mm Length x width: 562 x 462 mm Hjdpfx Ajyma Tiopnsfg Number of shafts: 4 pcs of which: cutting shafts 2 pcs cleaning shafts 2 pcs Number of cutting discs: 23 Shaft speed: 25 rpm.

Condition: good (used), Frame formwork, pipe hangers, manhole ring hangers, manhole frame lifters, manhole ring lifters, sewer ring lifters -Manufacturer: Zagro, Hydraulic manhole frame lifter type HK 6 -Lifting round shafts: inner diameter of approx. 60 cm, outer diameter of approx. 78 cm -4 lifting cylinders -Transport wheels -Dimensions: 1400/1120/H1020 mm Hedohp A I Sspfx Apnefg -Weight: 169 kg

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm new base frame with steel construction new feed-hopper 8 m³ new control cabinet Hodpfx Ajl I Dx Njpnsfg incl. 7 unused spare coils

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Hsdpst S Sxgjfx Apnefg Screw diameter approx. 370 mm Drive via geared motor

Condition: good (used), Slotting bed for four-sided planer WEINIG Unimat 23 with 6 spindles. Used condition Hedpfx Apeunbuvjnofg

Year of construction: 2020, condition: good (used), Winding roller, winding shaft, tensioning shaft, pneumatic expansion shaft, reel, reel rod, trapezoidal thread spindle, spindle, unwinding reel, unwinding reel, sheet metal unwinder -Manufacturer: Tidland, winding shaft -Type: G890E -Drive shaft: Ø 40 x 80 mm Hfodsyxmrdopfx Apnog -Mounting: Bolt circle Ø 220 x 11 mm -Number: 8x winding shaft available -Price: per piece -Dimensions: Ø 250 x 855 mm -Weight: 53 kg/unit

Condition: ready for operation (used), Year of construction: 2005, L & Z Lathe / WEILER DA 210x1000 / With new 3-axis digital readout - Year of manufacture: 2005 - CE marking - Guideways in good condition Hfsdpfx Ajy H Ikqepnjg - FULL TECHNICAL DATA SEE PHOTOS - Three-axis digital readout "NEW" - Quick-change collet system incl. 79 collets (173E) - Multifix base holder with inserts - 3-jaw chuck - Electrical chuck guard - Additional sliding guard - Coolant system - Drill chuck / live center - Chip guard rear wall - Work light - Complete documentation Dimensions: LxWxH 2.8x1.2x1.8 meters / Weight 1600 kg Errors / input mistakes excepted.

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Hfsdeyk Ea Aepfx Apnog

Condition: good (used), HEESS Hardening Press with IPSEN Rotary Hearth Furnace. Technical Key Data (Furnace): Process: Carbonitriding Workpieces: Gear components, up to Ø 260 mm, 4.7 kg Throughput: approx. 96 parts/hour Dwell time: approx. 56 min Temperature range: 820–960 °C Max. temperature: 1000 °C Uniformity: ±5 K Atmosphere: Endogas with propane/ammonia C-potential: approx. 0.9 %C Furnace: Ø 3000 mm, usable height 750 mm Energy: electric: 33 kVA Hfedjy Dd Adspfx Apnjg natural gas: approx. 19 m³/h HEESS Hardening Press: Pressing force: 300 kN Workpieces: Ø 60–250 mm, height 10–98 mm Cycle/process parameters: Pressing time: 0.1–10 min Pre-cooling time: 0–100 s Quenching medium: up to 300 l/min Handling: Manipulator + gantry robot (Siemens servo drives)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, power: 137 kW (186.27 HP), Conveyor belt continuous furnace, electrically heated, type DLE 600/200/3000 G, for soldering or annealing under exogas atmosphere. - Heating capacity: 137 kW - Soldering/annealing under exogas atmosphere - Conveyor belt width: 600 mm - Clearance above belt: 200 mm - Heated length: 3000 mm - Net throughput performance: 254 kg/h Hfedpfxoy Ddtio Apnjg - Max. temperature: 1150 °C

Condition: refurbished (used), Heating: electric Air circulator: 1 Temperature: 400°C Internal dimensions: (approx.) Width: 700 mm Hsdpfotukp Esx Apnofg Height: 450 mm X Depth: 1300 mm X Can be increased to ~ 700 mm clear height by changing the furnace floor. External dimensions: (approx.) Width: 2200 mm Height: 2700 mm Depth: 2500 mm Heating output at 400 V = approx. 15 Y /45 Δ KW + approx. 2.2 kW for heating gas circulator + approx. 1.1 kW for door lift (The furnace is originally designed for 500 V)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: #20206, overhauled, delivery time 3 weeks, with 12 months warranty - Internal dimensions (W x D x H): 1200 x 1950 x 1000 mm - Capacity: 2300 litres - Tmax: 1280°C - Siemens S7 control system with touch panel - 2 kiln cars for interchangeable use - Kiln cars equipped with heavy-duty rollers and steering drawbar, fully mobile on the workshop floor, completely overhauled - Multi-zone design (3 zones) - Automatic exhaust dampers / intake air fan - Separate control cabinet - All contactors and thyristor controls replaced with new - TWB with own type S thermocouple, new - All furnace heaters replaced with new - Control cabinet fan and air supply fan new - Power: 130 kW - Current consumption: 190 A Hfodeyk U Iispfx Apneg - Furnace weight approx. 2500 kg + each kiln car 1000 kg - DGUV V3 safety inspection up to date with protocol - Documentation, CE declaration, wiring diagrams included We are happy to offer installation, commissioning, and staff training. Please contact us! We supply new and used industrial furnaces. Viewing in our warehouse available on request! Kiln car furnace, bogie hearth furnace, furnaces, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, oven, tempering furnace, curing oven, drying oven, industrial furnace.

Condition: reconditioned (used), Year of construction: 2009, machine/vehicle number: SN FX036084, functionality: fully functional, 12 months warranty, in stock, immediately available, EXCELLENT condition Resistance-heated unit with gas-tight furnace muffle - Continuous operation Tmax 800°C - Max. temperature approx. 900°C (under protective gas) - SE-402 program controller - 3-zone heating - Gas supply system: Hfodpfeyxlwrjx Apnjg 2 different protective gases as well as fuel gases - Gas circulation - Vacuum system - Internal muffle dimensions (W x D x H): 580 x 830 x 1500 mm (special length) - Muffle volume approx. 722 liters - Max. charge weight approx. 1000 kg - Two-stage rapid cooling with frequency converter - Flare system with flame monitoring - Sight glass DN150 - Max. gas operating pressure 7 mbar - Mains voltage 400V, 3 phase, N, PE - Heating power 70kVA - Rated current 3x97A - Weight 1900 kg - External furnace dimensions (W x H x D): 1700 x 1950 x 2750 mm - Control cabinet dimensions (W x D x H): 510 x 1360 x 500 mm - Operating manual, wiring diagrams, CE declaration The furnace is offered overhauled (all switching electrical components such as contactors etc. replaced with new), new seals, electrically tested including measuring protocols. Inspection in our warehouse by appointment! Furnace, industrial furnace, melting furnace, tilting crucible furnace, crucible furnace, aluminum melting furnace

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 25,300 kg, power: 210 kW (285.52 HP), For sale is a single-shaft shredder from Doppstadt. It is currently still integrated in our production and can be inspected on site. The conversion is scheduled to take place around the end of July 2026. Hfsdpsyrgibefx Apneg All technical specifications can be found in the images. If you have any further questions, please feel free to contact us.

Condition: ready for operation (used), Mixer Machine, Twin-Shaft Mixer, Z-Arm Mixer Hfsdpfeu Hknkex Apnsg Mixer Machine, Twin-Shaft Mixer, Z-Arm Mixer, Used Equipment Overall dimensions: 1150 x 750 x 1520 mm Weight: 355 kg Hopper size: 530 x 500 x 400 mm Electrical specifications: 400V

Condition: excellent (used), max. workpiece diameter 300 mm hobbing length 1000 mm clamping length 2400 mm spindle head ISO 40 distance work spindle /surface of the table 180 - 330 mm surface area 2410 x 375 mm longitudinal feed 1000 mm vertical movement of the milling spindle 150 mm turning speeds 45 - 500 U/min weight of the machine ca. 5,6 t dimensions of the machine ca. 3,0 x 1,6 x 1,9 m Hfodpfxoyyqufj Apnsg

Condition: used, Twin Shaft Mixer, Twin Shaft Powder Mixer, Twin Shaft Feed Mixer, Halvor Forberg 2000LH, Used Machine Manufacturer: Halvor Forberg Model: 2000LH Overall dimensions: 2660 x 3280 x 2450 mm Mixing paddle size: 375 x 330 mm Hodpfx Ajxt Nuzepnjfg Mixer type: Twin shaft Bottom plate: Openable – product discharge is pneumatic

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, filling opening width: 700 mm, filling opening length: 960 mm, Untha RS 50 Shredder Power: 37 kW / 380 V 50 Hz Electrical cabinet – Siemens Simatic S7 Chamber dimensions: 960x700 mm New knives: 310/2Z and 270/8Z Quick-change screen system. Weight approx. 3,200 kg. Machine is fully operational and ready for use. Serviced by the manufacturer. Hsdpoy R Egqjfx Apnefg Price on request. More photos and a video of operation available on request. For further information, please call.

Condition: excellent (used), Catalogue number 7960 TECHNICAL DATA - Max cutting height: 140mm - Max workpiece width: 700mm - Working width of saw shaft: 580mm - Shaft diameter: 70mm - Max saw blade diameter: 400mm From above: - Kickback pawls/anti-kickback devices Hsdpfoy D Nabox Apnefg - 2 feed rollers, toothed - Metal slip roller From below: - Slip roller - Kickback pawls - Smooth feed roller - Saw shaft - Smooth feed roller - Metal slip roller - Stepless feed speed adjustment via inverter - Feed motor: 3kW - Main motor: 22kW - Overall dimensions (L/W/H): 1600x1300x1900mm - Weight: approx. 2000kg Net price: 46,900 PLN Net price: 11,170 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 60 h, power: 11.5 kW (15.64 HP), input voltage: 192 V, input current: 60 A, temperature: 1,350 °C, inner dimension length: 1,500 mm, inner dimension width: 100 mm, inner dimension height: 100 mm, total length: 2,000 mm, total width: 600 mm, total height: 600 mm, overall weight: 150 kg, number of chambers: 1, actuation type: electric, fuel type: electric, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Carbolite Gero Tube Furnace – 1350 °C, Ø 100 mm, Length 1500 mm – Fully Functional For sale is a high-quality tube furnace from Carbolite Gero in excellent technical condition. The furnace has only been operated for approx. 200 hours and was primarily used for sintering copper at around 1000 °C. Thanks to the maximum temperature rating of 1350 °C, the system was never thermally overstressed and therefore remains in well-maintained condition. 🔧 Technical Specifications - Max. temperature: 1350 °C - Tube diameter: 100 mm - Tube length: 1500 mm - Temperature measurement: internal thermocouple → precise process control - Features: water-cooled flanges 🔩 Condition & Notes - Furnace is fully operational - Supplied ceramic tube shows signs of previous use Recommendation: Hfedpfx Ajy H E Ndjpneg - Replace with new ceramic tube for high-temperature applications - Alternatively, use cost-effective metal tubes for operations below 1100 °C 💡 Benefits - Highly accurate temperature control via internal measurement (i.e., furnace temperature and ramps are regulated by an internal thermocouple, ensuring optimal sample temperature) - Ideal for precise sintering processes, heat treatment, and materials development - Robust industrial design from a reputable manufacturer 📦 Areas of Application - Metallurgy (e.g. copper, steel, ceramics, glass-ceramics, powder metallurgy) - Research & Development - Laboratory and small-scale production applications 🚚 Other - Inspection possible by appointment - Collection only

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: Hsdpeyz T R Eofx Apnofg - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7958 TECHNICAL DATA - Maximum cutting height: 120mm - Shaft width: 510mm - Shaft diameter: 75mm - Maximum sawblade diameter: 400mm Hfjdpfxeyzr N Hs Apneg – From above: - 2 rows of anti-kickback fingers - toothed feed roller - toothed outfeed roller – From below: - anti-kickback fingers - 2 toothed feed rollers - arbor with sawblade - toothed outfeed roller - 6 feed speeds - Hydraulic motor (for extension, feed, rollers): 3kW - Main motor: 22kW - Infinitely variable feed speed - Control stand dimensions: 700x600x1000mm - Overall dimensions (L/W/H): 2300x1450x1600mm - Weight approx. 2650kg ADVANTAGES – Turkish production – Robust construction – Used machine, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)