Used Sheetfed Offset Press for sale (12,827)

Condition: good (used), Year of construction: 2012, functionality: fully functional, Bale press Dixi 60 SLD, year of manufacture 2012 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Podpfxezk A Rdo Algegr Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Material: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Year of construction: 2008, Overview Pgedpszk Eqmsfx Alger This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: ready for operation (used), Clamping force: 1000 kg Overhang: 150 mm Arbor diameter: 40 mm Table diameter: 170 mm Installation height: 300 mm Space requirement: 420 x 380 x 1500 mm Pgjdpfx Aszi A Tpelgsr

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_4, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Pgjdpfjzlhmyox Algsr Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 135 t, It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Empty speed 2-10mm second pressing speed 2 mm second table size 1100x650x120mm 800 mm maximum open height table height max. 900 mm travel of the cylinder is 400 mm total height 2900 mm weight 2,3 T Pgodpfxjigg E Hj Algjr 200 L tank Pump with 60 L capacity 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Safety control system PILZ Communication operator/press Color touch screen 10" OMRON/SIEMENS

Condition: used, Year of construction: 1991, pressing force: 650 t, pressure:650 t passage width:920 mm Pgedjfhmuvspfx Algor stroke:1750 mm weight of the machine ca.:ca. 47 t Table area:2000 x 1500 mm ram surface:2000 x 1500 mm Daylight Opening:2100 mm Hydraulic:203 bar closing speed:500 mm/min pressing speed:0,5 - 10,4 mm/sec opening speed:250 mm/sec Solve speed:0,5 - 66,4 mm/sec Return Capacity:150 t total power requirement:75 kW Measurements (approx.):4,4 x 2,5 x 7,5 m

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressing force: 40 t, pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Psdpfxefhcc Hs Algogr Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressing force: 63 t, pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Pgodpfx Alsfhcc Ujgor Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, pressing force: 30 t, table width: 600 mm, table length: 600 mm, total length: 1,869 mm, total width: 850 mm, total height: 2,620 mm, overall weight: 2,900 kg, Hidrobrasil Single-Column Press – 30 t – 600 × 600 mm – 400 mm stroke For sale is a hydraulic single-column press (C-frame type) manufactured by Hidrobrasil, featuring 30 t pressing force and a compact design. The machine is equipped with a table size of 600 × 600 mm, making it ideal for assembly, straightening, and pressing operations, as well as for small batch production in workshop and manufacturing environments. Pgsdpfx Alevhcykegjr ==== Technical Data & Information: Hydraulic Single-Column Press – 30 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press - Design: C-frame press - Machine type: Assembly press - Pressing force: 30 t - Machine weight: approx. 2.9 t ==== Working Area - Stroke: 400 mm ==== Table & Ram - Table size: 600 × 600 × 100 mm - Clearance behind table: 50 mm - Table fixing points: 600 / 800 / 1000 mm ==== Speeds - Downward speed: 10 mm/sec - Upward speed: 24 mm/sec ==== Hydraulics & Drive - Motor power: 3 kW - Oil tank: 60 l ===== Assembly operations, press-fitting operations, straightening work, workshop applications, small series production Hydraulic press, single-column press, C-frame press, assembly press, industrial press

Condition: new, Year of construction: 2019, machine/vehicle number: DF0362, pressing force: 250 t, pressure:250 t passage width:1800 mm stroke:600 mm total power requirement:22 kW weight of the machine ca.:24 t dimensions:ca. 3390 x 3400 x 3800 mm column diameter:160 mm return capacity:25 t max. working heidht:800 mm Table dimensions:1800 x 1600 mm :2350 x 1600 mm table height over floor:900 mm hydraulic table shift:25 mm/sec table load:5 t pre-running speed:10 mm/sec pressure speed:10 Return Speed:25 mm/sec Podefxyinjpfx Algsgr speed rapid traverse:10 mm/sec :600 l Oil cooling (electric):1,5 kW (max) :46er / 10 my Monitor SIEMENS:10 Zoll

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 33407, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, stroke length: 300 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table length: 3,050 mm, throat depth: 400 mm, ram plate length: 3,000 mm, distance table to ram: 570 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 5,700 mm, total width: 2,100 mm, total height: 3,685 mm, overall weight: 14,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Technical specifications Force: 2200 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 300 mm Distance table – ram: 570 mm Gap: 400 mm Turbo PP5400 Approach speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Weight: 13500 kg Motor: 37 kW Oil: 350 L Weight: 14500 kg LxWxH: 5700 x 2100 x 3685 mm Table: PP8170 Psdszkxqmopfx Algjgr V-axis  EFL 130 PP8303 Upgrade 2026  Top tool clamping: PP3090 – Wila  Hydraulic top tool clamping: PP3100  PP3160 hydraulic clamping V-dies  Back gauge: PP8251 XRZ modules: X1000  Security; CE: PP3580 – lasersafe  PP8402 T1 T2

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34435, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table width: 120 mm, table length: 3,050 mm, table height: 970 mm, throat depth: 405 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Year of manufacture: 2012 Serial number: 34435 Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Pedpfozk H A Dex Algjgr Approach speed: 128 mm/s Working speed: 22 mm/s Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Oil: 350 L Weight: 11500 kg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis • EFL 90 • Top tool clamping PP3090 – Wila • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe • 2 supports, front

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pgsdpfx Alsh Agnuoger Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 200 t Gantry Press – Table 4,000 × 2,000 mm For sale is a versatile portal straightening press from Hidrobrasil featuring a pressing force of 200 t. The machine is equipped with a large table area of 4,000 × 2,000 mm, a laterally movable cylinder, and a longitudinally adjustable bridge structure, making it ideal for large-format straightening, assembly, and special applications. ==== Technical Data + Information: Portal Straightening Press Hidrobrasil – 200 t Gantry Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry press - Pressing force: 200 t - Operating pressure: max. 285 bar ==== Working Area - Table size: 4,000 × 2,000 mm - Clear width / height: 1,500 mm - Column spacing: 2,050 mm - Stroke: 1,500 mm ==== Movements & Travel Paths - Lateral cylinder adjustment: max. 1,450 mm - Longitudinal bridge movement: max. 2,800 mm - Approach speed: 20 mm/s - Working speed: 2 mm/s ==== Construction & Equipment - Hydraulic power unit mounted on top of the press - Hydraulic block and valves by Bosch Rexroth - Air and oil filters by Filtrec - Combination air and water cooling - Stroke cylinder integrated in the worktable - Machine control via wireless remote (2-button system) - Anti-rotation device for the cylinder - Machine status and diagnostics system with touchscreen Pgsdpfx Aloxrb Nbsger ==== Auxiliary Stroke Cylinder System - Number of stroke cylinders: 10 units - Rod diameter: 25 mm - Stroke: 80 mm - Controlled via hydraulic system or control unit ==== Control & Operation - Siemens PLC: S7-1200 - Siemens Touchscreen: KTP900 – 9" - Up to 99 programs storable - Functions: - Setting stroke, pressure, and hold time - Decompression time - Piece counter - Alarm management - Real-time monitoring of all parameters - Positioning accuracy: ± 0.1 mm ==== Safety & Monitoring - Emergency stop system - Two-hand/wireless operation with safety release - Safety stripe on gantry columns - Hydraulic oil temperature monitoring - Automatic shutdown at overtemperature (> 65°C) - Filter monitoring - CE compliant ==== Hydraulics - Main drive power: 5.5 kW - Oil volume: not supplied - Oil temperature control with automatic cooling ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Components: Siemens, Allen Bradley, Phoenix ===== Straightening work, large components, assembly work, special purpose machine construction, steel construction, maintenance, press-fitting applications Gantry press, straightening press, hydraulic press, industrial press, special machine, tool matching press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Guidelines as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety guideline NR 12, which builds upon them. Our core expertise lies in special purpose machine construction and press automation. The hydraulic systems of our presses primarily utilize components from leading European manufacturers.

Condition: new, Year of construction: 2019, pressing force: 275 t, pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Pedpefxyigefx Algogr Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Condition: good (used), Year of construction: 2001, For sale is a TOX Pressotechnik press, model MBG 004.124. The machine features a pressing force of 40 kN (equivalent to approximately 4 tonnes) and is suitable for industrial press-fitting, joining, assembly, riveting, embossing, and staking operations. A key highlight is its current certification status: The machine remains certified until April 2027. Technical Data Manufacturer: TOX Pressotechnik Type: MBG 004.124 Product Type: Press / Press-fit machine / Joining machine Pressing force: 40 kN Maximum air pressure: 5 bar Total stroke: 200 mm Power stroke: 80 mm Year of manufacture: 2001 Machine serial number: 210192.1 Machine/Electrical number: 210193.1 Nominal voltage: 230 V AC Control voltage: 24 V DC Frequency: 50 Hz Psdjznkvpepfx Algegr Power: 0.2 kW Rated current: 0.5 A Back-up fuse: 16 A Protection class: IP65 Standard: DIN EN 60204 Circuit diagram: STE 325-26 Country of manufacture: Germany Certification valid until: 04/2027 Condition: Used The press operates with a total stroke of 200 mm. The actual power stroke is 80 mm, delivering a maximum pressing force of 40 kN. The machine is suitable for tasks such as press-fitting bushings, bearings, and pins, as well as for assembly, riveting, embossing, staking, and joining operations. Please refer to the images for the exact condition and scope of delivery. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional presses and industrial machines—both new and used—in our shop! PD

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 24619, functionality: fully functional, operating hours: 2,442 h, power: 15.8 kW (21.48 HP), pressing force: 120 t, stroke length: 260 mm, controller model: Delem DA-66T, working width: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 120 t Max. working width: 3,100 mm Frame spacing: 2,550 mm Rear gauge depth: 750 mm Pgsdpfszk Dy Tsx Algor Max. stroke: 260 mm Number of axes: 6 (Y1+Y2+X+R+Z1+Z2) MACHINE DETAILS Power: 15.8 kW Drive system: CNC Control: Delem DA-66T Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,000 x 2,700 mm Weight: 8,500 kg Operating hours: 2,442 h EQUIPMENT Finger guard Tools included Crowning system: CNC-controlled Punch holder: Standard Tool holder type: European style

Condition: excellent (used), 4-axis hydraulic CNC press brake with HACO-Robosoft ATS 590 Graphic control (modernized in 2008) and CE conformity. Pressing force: 135 t Bending length: 4000 mm Dimensions L x W x H: approx. 4500 x 1600 x 2320 mm Weight: 10500 kg Accessories / Special features: Pgsdex Npiyepfx Algor • 4-axis CNC control HACO ATS 590 Graphic Y1 + Y2, X, R for bending depth, back gauge, and top/middle/bottom gauge fingers • The gauge fingers are adjusted manually, moving them together/apart • Graphical programming and display • CE conformity through 1 working speed • Hydraulic synchronized control • Manual table crowning by adjustment via hand crank under the die with SIKO counter • Split upper tooling, as new • Continuous universal die with 4 different V-openings up to max. V = 40 mm, as new • Split additional upper and lower tooling • Collecting rail • Tooling system "PROMECAM" • 2 pcs. support arms • Fast, precise and easy to adjust • Foot switch and emergency stop • Electrically secured safety doors (right, left, and rear) • 1 working speed, rapid return • CE conformity UVV valid until 04/2027 Delivery time: immediately from stock in Dortmund, free loading onto a truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Rotex Air Lite V3 IVM” textile press Item for sale: 1x Rotex Air Lite V3 IVM Condition: This offer is for a used device, which may show signs of wear (minor scratches or discoloration). The unit has been tested to ensure it is in working order. Packaging and Shipping: You are welcome to inspect the unit during our business hours. Please schedule an appointment to do so! Sturdy packaging and worldwide shipping are available upon request! Pjdpfxezpw E Hj Algsgr Before shipping or pickup, we will record a video of a functional test for you. For more information, please feel free to contact us directly.

Condition: used, Year of construction: 2018, Avermann baling press, type AVOS 1810 BRK-90/100, year of manufacture 2018, cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of the feed hopper: 1,800 x 1,000 mm Throughput capacity at 35 kg/m³: 15.0 t/h Throughput capacity at 60 kg/m³: 20.0 t/h Throughput capacity at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, depending on the material Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Pjdpozqc Ngofx Algsgr Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm Pjdpex Uru Nefx Algogr weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t Pjdpfsxcblwox Algogr dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: used, functionality: unexamined, Due to warehouse clearance, we are selling a total of 12-15 used machines/presses/workshop presses (see pictures, including those from Bosch). The machines are mounted on sturdy base frames/tables and are ideal for workshops, production, hobbyists, or for obtaining spare parts. Individual price: €60 per machine. Package price: If you purchase all 7 machines, you will receive an attractive package price! Condition: Used, as shown in the pictures (see photos). Upon request, transport and loading can be arranged for an additional fee, and we can organize transport throughout Europe. Prices exclude VAT. Psdpfx Alszqtzmsgogr Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machine purchase and sale WE BUY/SELL PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Condition: good (used), Year of construction: 1997, functionality: fully functional, oil tank capacity: 220 l, pressure: 300 bar, ID43737 Year: 1991-1997 Press machines with capacities from 60 tons to 80 tons Brand: Hydro-Presses 2 units with 60 ton force PH600 Hydraulic cylinder stroke: 600 mm Pgsdpfjwhcmpjx Algjr Maximum hydraulic cylinder force: 60 tonnes at 300 bar 5 units with 80 ton force PH800 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 80 tonnes at 300 bar

Condition: ready for operation (used), Year of construction: 2022, Hongming HM-950 continuous roller pressing and flattening machine, suitable for the production of hard covers, book covers, folders, presentation materials, rigid boxes, and other glued cardboard or paper products. The machine continuously feeds the material through a large pressure roller via a conveyor belt. This ensures an even pressing result, improves adhesion between the glued layers, and helps to remove trapped air bubbles and irregularities. The pressure and working height can be adjusted manually on both sides of the machine. Technical specifications: * Manufacturer: Hongming * Model: HM-950 * Machine type: Roller pressing and flattening machine * Year of manufacture: June 2022 * Working width: Approx. 950 mm * Serial number: J01010089-0026 * Voltage: 380 V * Frequency: 50 Hz * Current: 3.4 A * Motor power: 0.75 kW * Power supply: 3-phase * CE marked Suitable for: * Hard-cover production * Bookbinding and book-cover production * Rigid-box and luxury-box components * Greyboard with glued covering paper * Folders and presentation covers * Cardboard and paper converting * Pressing and smoothing of glued materials Condition and equipment: Pedpfx Alezq Tz Togsgr The machine is in clean overall condition and appears complete. It is equipped with a continuous conveyor belt and a large covered pressure roller. The original English-language operating manual is included. Inspection is possible by appointment.