Used Shredder Cardboard for sale (2,023)

Condition: like new (used), Year of construction: 2026, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput Iodpfxjdwktko Acpetn - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: good (used), Strapping machine, packaging machine, carton stapler, stapler, pliers stapler -Pneumatic stapler Itjdpfx Acsfc R Dyspsn -with: balancer and compressed air hose -Adjustable depths: 5 -Clamp width: 32 mm -Dimensions: 390/100/H210 mm -Total weight: 3.4 kg

Condition: new, GENERAL INFORMATION The ZIS series single-shaft shredders are characterized by their spacious cutting chambers, which owe their stability to a robust steel-welded construction. The rotor diameter is generously dimensioned at 457 mm. Rotor widths are available in 1200, 1500, and 2000 mm. The ZIS series retains all benefits of the ZSS series: drive via an oversized gearbox, reversible blades, bolted blade holders, durable externally mounted bearings, hydraulic screen cradle, easy handling, and technically advanced control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies such as IBCs, waste bins, pallets, rain barrels, etc. Additionally, the machine can be universally used for countless applications in the plastics and wood industries. Like all Zerma shredders, machines of the ZIS series can also be equipped with various wear protection options. ADVANTAGES Iodpjyr I I Ssfx Acpjtn 35% larger cutting chamber volume compared to the ZSS series Internally positioned hydraulic ram Increased ram speed in the return stroke Compact dimensions Blade holders bolted into rotor pockets

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. Itjdjyr Tg Topfx Acpen The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Typical applications include, but are not limited to, the following: Injection molding Thermoforming Blow molding Recycling Extrusion Waste

Condition: used, machine/vehicle number: 11403, Rotor blades: 2 x 7 stars Itodeyx Nlyopfx Acpon Rotor width: 1200 mm Rotor diameter: 350 mm Inlet: 850 x 1200 Power: 30 kW

Condition: new, machine/vehicle number: 12007, Technical data: Itedpfx Acjyr Tpujpjn Cutting area: 700 x 1300 mm Number of cutting discs: 18 Cutting disc width: 65 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2900 kg

Condition: new, Dimensions with base frame: approx. 1500 mm x 1400 mm Feed speed: 27 m/min Rotor blades: 2 Stator blades: 1 Itedpfxoyr Tu Rj Acpjn Infeed cross-section: approx. 10 x 40 mm Drive motor: 1.5 kW Weight with base frame = approx. 270 kg

Condition: used, Year of construction: 2018, operating hours: 7,293 h, total height: 9,500 mm, total length: 34,500 mm, total width: 14,550 mm, Production year: 2018 Model: 10HM Drake Number of operating hours: 7293 h Minimum space requirements: 34500mm x 14550mm x 9500mm Electric motor power (Siemens): 550 kW Working shaft width: 1000 mm Configuration: 10 hammers, 3-2-3-2 arrangement (weight per hammer: 105-117 kg) Capacity: 14 tons/hour Magnetic separator (steel) – 2 units Eddy current separator (non-ferrous metals) Drum screen Spare parts: Flap, 3 sets of hammers, pins, conveyor belts, sensors, 6 screens, gearboxes Isdjzmul Ejpfx Acpotn If you have any questions or require further information, please send a message or contact us by phone.

Condition: good (used), functionality: fully functional, total height: 980 mm, total width: 580 mm, total length: 610 mm, overall weight: 116 kg, opening width: 165 mm, power: 1.9 kW (2.58 HP), Equipment: documentation/manual, Intimus FlashEx Media Destroyer. For destroying SSD drives, smartphones, tablets, and USB sticks. Ijdpfx Aov D Hchjcpjtn Voltage: 120V (60 Hz). Comes with manual.

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition Itodpfx Aora N A Nscpsn make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: used, Shredding Machine LINI LW 40 - used - Iedpfxswi Stns Acpetn Hydraulic feed, PLC control, ----- Technical Specifications ----- Hopper opening: 600 x 820 mm, Hopper volume: 0.5 m³, Rotor diameter: 200/250 mm, Rotor length: 600 mm, Motor power: 18.5 kW, Weight: 1,050 kg, Dimensions (LxWxH): 2,070 x 1,260 x 1,640 mm, Screen hole size: 15 mm.

Condition: used, Year of construction: 2025, New demonstration machine! List price €25,500 net. Machine concept WL 4 / 18.5 kW. The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed either via a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended on universal joints to avoid transverse forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 256 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive and 4-way rotatable knives/cutting inserts are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction of the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption and an optimal discharge of the shredded material. The screen attached under the rotor determines the chip size (10 - 100 mm). On request, a hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor stub on one side. Equipment and technical data: Drive power 18.5 kWHopper opening with Logspacer: 600 x 1,050 mmHopper capacity: approx. 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 252 mmRotor speed 60-100 rpmNumber of knives: 28Type and size of knives: concave / 40 x 40 mm, cutting insertsScreen size: 12/10 mmPainting: Weima Standard RAL 2002 / 7016Connection value: 400 V +/- 5% / 50 HzWeight approx. 1,300 kg including:Control cabinet with display and 5 m cableElectrical controlStar-delta startRubber vibration elementV-rotor (patented) with knife pockets milled into the profileGearbox limit switch2nd knife rowClamping bar on the slide Location: Itjdpfx Aozuf U Tscpon

Condition: used, Year of construction: 2011, operating hours: 300 h, functionality: fully functional, type of input current: three-phase, power: 30 kW (40.79 HP), input voltage: 400 V, filling opening width: 1,350 mm, filling opening length: 1,035 mm, Used DECOVAL 4-shaft industrial shredder (Year 2011). Designed for efficient processing and shredding of plastic waste materials. Heavy-duty 3.25-ton machine equipped with two 11 kW shredding motors and two 4 kW pusher/feeder motors (total power 30 kW). Operated by a Siemens LOGO PLC, which controls automatic reverse/anti-jamming cycles. Comes complete with the original, comprehensive technical operation and service manual. Itsdjzqy Hiepfx Acpsn

Condition: used, Year of construction: 2013, operating hours: 4,867 h, functionality: fully functional, Equipment: Basic model DW 3060-C “Büffel” Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. ABS and lighting according to EC directive 50 mm EC drawbar coupling incl. adapter shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the side) Permissible total weight 25,000 kg Tires 385/65 R22.5 Mercedes-Benz diesel engine OM460LA, 315 kW at 2,000 rpm, meets exhaust emission standard EUROMOT IIIB Additional hydraulic connections 20 l and 70 l/min. (using a variable pump) Hydraulic preparation for comb basket system and drive mechanism Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pieces) and comb (22 pieces) - form C (174 mm, armored) Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Ijdpozn Icyofx Acpotn Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control system Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint finish: 2-component paint RAL2011 deep orange Additional equipment: BioPower package - Engine output: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 form C armored (42 pieces) - Comb basket system with fine strip basket - Transmission oil cooler Hydraulic drive mechanism Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system Funnel attachment plates foldable on both sides Delivery date will be agreed upon.

Condition: good (used), Year of construction: 2014, Cardboard packaging machine, carton erector, B&E Equipment / I-Pak – used: Price ex works: only €9,950 (net), if disassembled by the buyer! Manufacturer: B&E Equipment / I-Pak Iodpfx Aozbynpecpstn Type: BA20-2 Year of manufacture: 2014 Serial number: 14/0559 Each unit comes with 1x Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,250 kg 400V, 7kW, 16A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: new, Year of construction: 2026, Cardboard Box Sealing Machine AS823A, Semi-Automatic, 220V, Box Sealer, NEW Selling Price: €2,290.00 gross, including VAT Article Description: Professional, semi-automatic cardboard box sealing machine AS823A. The AS823A is a robust box sealing machine for professional use in shipping, warehousing, logistics, and production. The machine seals boxes quickly and evenly with standard OPP adhesive tape and is particularly suitable for companies with regular shipping volumes. Thanks to the adjustable box size, the machine can be used for different packaging formats. Technical Data: Model: AS823A Type: Semi-automatic box sealer Power supply: 220 V / 50 Hz Power: 2 × 90 W Conveyor speed: approx. 16 m/min Isdpfx Aezwgm Ajcpjtn Box length: from 150 mm Box width: 150–500 mm Box height: 120–500 mm Adhesive tape width: 36 / 48 / 60 mm Working height: approx. 560–750 mm Machine dimensions: approx. 1408 × 962 × 1270 mm Net weight: approx. 100 kg Your Advantages: The machine enables consistent and efficient box sealing and reduces manual effort when packing larger quantities. Suitable for, among others: Mail-order business • E-commerce • Logistics centers • Warehousing operations • Wholesale trade • Production companies • Spare parts trade Scope of delivery: 1 × Cardboard box sealing machine AS823A as per the offer. Commercial sale from Germany. You are purchasing from a German commercial dealer and will, of course, receive a proper invoice with VAT shown. Warranty: 2-year warranty from H.Z. Tagiyev UG (limited liability company). Technical support and spare parts supply upon request. Shipping: Freight shipping within Germany. Please contact us before purchasing if you have special delivery requirements. We will gladly prepare an individual offer for deliveries to other European countries. Consultation & larger quantities: Do you need several machines or would you like to check whether the AS823A is suitable for your box sizes? Please contact us before purchasing. We can also offer quotations for larger quantities. H.Z. Tagiyev UG (limited liability company) Germany

Condition: good (used), CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine The machine is fully operational and ready for production. Like new. This highly efficient creasing system is ideal for the production of binders, hard covers, and more. Made in Italy. Sheet feeding is manual, while the machine handles the rest automatically. An automatic feeder can also be added (optional). Parameters are set from the control panel and jobs can be saved to the machine’s memory. Materials processed range from 200 GSM to 4 mm cardboard. Sturdy construction, weighs 750 kg. Adjustable creasing and counter-creasing widths. Stepper motor control. Fast operation, up to 2400 sheets/hour. Sheet size: 750 x 1400 mm. Two sheet guides with an extended table and pressure rollers. Quick machine format conversion in less than 1 minute. Receiving table included. Itsdpfx Acezw Typjpjn

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Technical specifications • Sheet width: 1700 mm • Maximum sheet dimensions (X/Y): 1700 mm / 4000 mm • Minimum sheet dimensions (X/Y): 300 mm / 600 mm • Cardboard thickness: from 2 mm to 8 mm • Single production run: 200–600 units/hour • Maximum multi-unit production capacity: up to 2000 units per hour • Machine weight: approximately 4500 kg Itjdpfsz A Tfgjx Acpen • Machine dimensions (X/Y/Z): approximately 5500 mm / 4000 mm / 1900 mm

Condition: used, Year of construction: 2008, machine/vehicle number: 1462, number of blades: 73, LINDNER MICROMAT 1500 – 75 kW – 2008 – OPERATIONAL MACHINE, TESTING POSSIBLE For sale: a Lindner Micromat 1500 single-shaft shredder from the renowned Austrian company, Lindner Recyclingtech. This machine has a power output of 75 kW and was manufactured in 2008. It is designed for the industrial shredding of plastics. Technical specifications: Manufacturer: Lindner Recyclingtech Model: Micromat 1500 Year of manufacture: 2008 Power: 75 kW Power supply: 400 V / 50 Hz Machine number: 1462 Country of origin: Austria CE marking Isdpjz Ayayofx Acpetn The machine is currently connected to an operational production line. It is possible to start and test the shredder directly in the hall, under real operating conditions. Arrangements can be made in advance for an inspection and a demonstration of the machine's operation in the hall.

Condition: used, Year of construction: 1997, functionality: fully functional, Weima WL10/45 V-ROTOR shredder Rotor length: 1000 mm Number of knives: 24 Rotor speed: approx. 90 rpm Rotor diameter: 368 mm Iedpfx Acozxpyhjpetn Number of screens with 20 mm diameter holes Main motor power: 45 kW Hydraulic pump motor power: 0.75 kW Technical documentation and CE certificate included Machine dimensions: 240 x 178 x 173 cm (H) Year of manufacture: 1997

Condition: excellent (used), Year of construction: 2014, Diesel engine: 430 HP Rear duscharge conveyor Overband magnet Hydr. self-propelled drive (for moving on site) Radio remote control We can also offer financing if required. Itodpfx Aoi Trvbocpen

Condition: new, Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), AZR 600 – 18.5 kW 30 round knives with welded knife holders incl. 2 knife rows = 30 knives "V5" Screen: 15/20 mm Angled machine frame Pusher with hold-down device Vibration-damping machine feet Automatic star-delta start-up Automatic shutdown when hopper is empty Control cabinet with 5 m cable and PLC-controlled Feed opening: 600 x 800 mm Hopper volume: 0.6 m³ Rotor diameter: 252 mm Main motor: 18.5 kW – 400 V – 50 Hz – 3 Ph. Hydraulic motor: 0.75 kW – 400 V – 50 Hz – 3 Ph. Iodpfxei Hb Iae Acpjtn Subject to technical changes and errors.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, machine/vehicle number: 07/21/158, power: 55 kW (74.78 HP), fuel type: electric, hopper volume: 2,800 l, rotational speed (max.): 90 rpm, rotor diameter: 500 mm, The machine has been used very little and is therefore in good condition with new blades! TECHNICAL DETAILS Itedpfx Acszkg Sfopen Infeed and Hopper Infeed opening: 1,800 x 1,500 mm Hopper capacity: 2.8 m³ Rotor Rotor diameter: 354 - 500 mm Rotor speed: approx. 90 rpm Tools and Screening Tools V5 + V7: 45 / 90 / 135 / 180 pcs. Screen opening: 10 - 50 mm Extraction Extraction nozzle diameter: 250 mm Air velocity: 32 m/s MACHINE DETAILS Performance and Drive Power: 55 kW (74.78 hp) Fuel type: electric Power requirement, dual drive: 2 x 45 / 2 x 55 kW Weight: approx. 5,800 kg EQUIPMENT Rotor shaft made of solid steel Hydraulic feed for constant material flow to the rotor Cardan-mounted hydraulic cylinders to prevent premature wear of the piston seals Screens with various screen openings for the required chip size, depending on the material and application Safety package with gearbox limit switch and reversing counter Changeable basket available New blades Note: Further technical information, such as the machine dimensions, can be found in the attached data sheet.

Year of construction: 1985, operating hours: 75,240 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0574 028 07, Largest sheet size: 1420 x 1020 mm Itedpfxszg D I No Acpon Smallest sheet size: 700 x 500 mm Maximum punching force: 600 t Gripper edge: 18 – 22 mm Maximum number of cycles per hour: 6000 Processable materials: Cardboard 100 – 1000 g/m² Corrugated board F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with waste separation station, intermediate sheet insertion, and pre-stacking device, working platform, - 1 x preparation table for external tool preparation - 6 x frames for blanking dies - 6 x closing frames for die-cutting tools - 6 x tool carts

Condition: excellent (used), functionality: fully functional, 1 set of spacer washers for EXTEC 3600 shredder Itodpfx Aszg Uyvjcpsn EXTEC article number: S0290000