Used Shrink Films for sale (1,588)

Condition: used, Year of construction: 2008,   Machine Overview The ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation. Operating mode: Automatic Infeed layout: Straight infeed (inline) Packaging: Tray wrap with neutral film overwrap Format range: 0.5 L – 10 L Machine configuration: Delivered without container infeed system (to be provided by the line) Year of manufacture: 2008; Overhauled: 2022 Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing. Key Technical Data Model: COMBIGIOTTO 90-M Brand: ATLANTA Operating condition: Ready for operation Package configuration: Wrap + film on tray Film type: Neutral Tray: Available (tray packaging configuration) Machine feed type: Straight (inline) Format capability: 0.5 L to 10 L containers Year: 2008 (overhauled 2022) Automation & Control Industrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability). Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application. Integrated diagnostics, alarm history and counters (shift/lot totals). Podpfx Ahoxdnbze Usha Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status. Electrical protection degree: IP54 for the electrical system and motors. Line Integration Container infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator). Inline design simplifies alignment with fillers, labellers and downstream conveying. Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration. Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering). Condition & Maintenance Overall status: Ready for operation. Overhaul completed in 2022 to restore full functionality.

Condition: good (used), CRYOVAC ST 02 ID.NO. 2892 Phodpfx Aev Aby Eeh Usa Cryovac ST 02 shrink bath with water. Max dimensions product 59 x 37 cm. Dimensions machine 70 x 60 H 110 cm.

Year of construction: 2004, condition: good (used), Built in 2004 Heating capacity 20.8, 23.4, 31.2 kW Temperature max 280 ° C Exit height 300-400 mm Tunnel width max 500 mm Transport speed adjustable 5-25 m/min Electrical 400 VAC Electrical 3 Ph, N+PE Electrical 50 Hz Phedpfx Aod S Svhsh Usa Electrical depending on heating 18-30 kW Dimensions (L x W x H) 2600 x 1100 x 1500 mm Equipment: Trimer for delayed switch-off Pressure trolleys on exit Cooling blower above exit Lateral film blowing devise Integrated socket 16 A Chain lubrification

Condition: used, Year of construction: 2023, Shrink tunnel 50 Twin with double blower Equipment - Manual height adjustment of the conveyor belt - Digital control panel with 9 selectable and personalized programs - Possible selection of automatic roller rotation - Adjustable air flow - Cooling program - Outfeed roller conveyor as standard Podjuaklmspfx Ah Uoha - Two independent chambers with temperature control Technical data - Connected load - 380/400 V / 3 ph - Tunnel inlet dimensions - 450 x 210mm - Max. Product dimensions - width 400 mm / height 190 mm - Machine dimensions - 2,130 x 800 x 1,460 mm - Weight - approx. 260 kg ALSO AVAILABLE IN INNOX VERSION !!!

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, type of input current: three-phase, product height (max.): 650 mm, product length (max.): 3,000 mm, product width (max.): 1,350 mm, overall weight: 2,300 kg, pass-through width: 1,400 mm, input frequency: 50 Hz, nominal power: 59 kW (80.22 HP), temperature: 220 °C, Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm Pjdpext Idbofx Ah Ujha height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors. Psdpjh U A I Refx Ah Ueha

Condition: used, Year of construction: 2013, Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour The Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour is a machine designed for shrink film packaging, ensuring high performance and reliability. Consequently, this model, manufactured in 2013, operates at a speed of 1650 bundles per hour, making it suitable for high-efficiency production environments. Technical Features of the Used Shrink Wrapper ITAL PAL FNC70+ PC300T1 1650 Bundles/Hour First of all, the machine features a straight entry configuration, allowing a linear handling of containers before film wrapping. Additionally, it works with neutral film, but it also supports printed films, enabling packaging customization according to production requirements. Moreover, the system includes a tray, which is essential for product stability during the packaging process. It processes formats ranging from 3 to 24 pieces per carton, with an adjustable configuration based on container volume. Similarly, the machine operates with American boxes, a widely used packaging type in the industry to ensure product protection and durability. Electrical Specifications and Energy Consumption Furthermore, the system operates with a voltage of 380V, a power consumption of 10 kW, and a frequency of 50 Hz, meeting industrial standards for this type of machinery. Given these specifications, the shrink wrapper dimensions are 3400 mm in length and 2400 mm in depth, making it compatible with many existing production lines. Container Compatibility In particular, the Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  processes various types of containers, primarily focusing on glass bottles and cans, offering operational flexibility for different industrial sectors, including the beverage and food industries. As a result, manufacturers benefit from a machine that efficiently handles diverse packaging needs. Pjdjv Ew Rlopfx Ah Uoha Operational Status and Maintenance Notably, the machine is currently in production, ensuring full operational functionality and proper performance of all its components. Additionally, both technical manuals and safety protections are available, complying with industrial safety regulations. In addition to these features, the shrink wrapper has undergone periodic revisions, maintaining consistent performance and minimizing the risk of machine downtime. Furthermore, spare parts are available, facilitating routine and extraordinary maintenance without affecting productivity. Conclusion of this Used Shrink Wrapper ITAL PAL To sum up, the used ITAL PAL FCN70 + PK300T1 shrink wrapper is an optimal solution for those seeking a reliable machine with high production capacity. Consequently, its versatile configuration, compatibility with different packaging formats, and guaranteed maintenance make it ideal for automated packaging lines. Given its efficiency, the 1650 bundles per hour speed, combined with compatibility with neutral and printed films, makes it a strategic choice for optimizing industrial packaging processes. Therefore, this machine is an excellent investment for businesses aiming to enhance their packaging efficiency.

Condition: used, Year of construction: 2004, • Two solvent tanks – for continuous operation and efficient adhesive application • Perforation unit – integrated perforation system for custom tube formats Pedewynlhjpfx Ah Usha • Built-in extraction and blower system – ensures clean working conditions and effective removal of fumes or particles • Tube diameter range: 20 – 300 mm • Maximum speed: up to 200 m/min

Year of construction: 1989, condition: used, Standard equipment Psdpfx Ahsbriv Ne Uoha

Condition: new, Year of construction: 2023, Shrink tunnel 70 digit Pedjuaki Sepfx Ah Ujha Technical features Power supply: 200/220/380V Pase: 3 ph MAX product dimensions: 650x350x lg.1200mm Machine dimensions: 2770x1160x h.1640mm Weight trolley (net/gross): 415/483kg Tunnel inlet dimensions: 680x390mm

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm Pjdpokn Rz Hsfx Ah Ujha

Condition: like new (used), -Tunnel opening approximately 400 x 200 mm. -Temperature adjustable up to 200 degrees. -Transport speed adjustable up to 15 m/min. -The machine has four casters for movement and four separate adjustable feet for locking. Psdov Iydaepfx Ah Usha -220V/50 Hz/6.5 KW The machine has never been operated and is therefore unused. The scope of delivery includes an operating manual with a spare parts list and circuit diagram, as well as two spare heating elements.

Condition: used, Year of construction: 2003, Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour shrink-wraps products efficiently. Consequently, its fully automated structure and production capacity of 1200 bundles per hour ensure high performance. Technical and Functional Specifications Psdpfjv Ew Iwsx Ah Uoha The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour operates with a continuous motion system, thereby maintaining a steady production flow without interruptions. Moreover, the wrapping process applies shrink film, effectively packaging bottles, cartons, and other containers. In addition, the system supports high-speed production lines, thus minimizing downtime and optimizing operational efficiency. Furthermore, the machine incorporates a straight inline feed system, which allows it to adapt to different conveyor speeds while integrating seamlessly with other machinery in the bottling line. As a result, this configuration simplifies integration into existing plants without requiring complex structural modifications. Shrink Film Characteristics In particular, the Used Shrink Wrapper Tetra Pak  applies standard shrink film, thereby eliminating the need for printed film support. As a consequence, this design increases flexibility in packaging material selection and significantly reduces operating costs. Therefore, the machine remains suitable for diverse industrial applications. Bundling Capability Notably, the bundling system of the Used Shrink Wrapper Tetra Pak creates packs with or without trays, depending on the chosen configuration. Additionally, the machine accommodates various container formats, including bottles, bricks, and cartons, thereby providing high flexibility in production management. Since it runs at 20 bundles per minute, the system efficiently delivers 1200 bundles per hour, making it an excellent choice for high-production plants aiming to optimize workflow. Consequently, businesses can enhance their operational throughput significantly. Shrink Tunnel The Used Shrink Wrapper Tetra Pak includes a high-efficiency shrink tunnel, which ensures uniform sealing and tightening of the film around the bundle. Additionally, the system regulates temperature control, thereby guaranteeing optimal shrinkage without damaging packaged products. As a result, this feature preserves packaging quality and minimizes production waste effectively. Operating Conditions and Safety of the Used Shrink Wrapper Tetra Pak At present, the Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour remains in storage condition, thus making it ready for reinstallation and operation. Furthermore, the system incorporates safety devices that protect operators during use, thereby minimizing accident risks and ensuring compliance with industrial regulations. Manufactured in 2003, the Used Shrink Wrapper Tetra Pak continues to provide an efficient, robust, and easily integrable packaging system. Moreover, its modular structure and compatibility with various packaging materials make it a versatile solution for multiple sectors in the food and beverage industry. Ultimately, this machine enables companies to optimize their packaging operations while maintaining high standards of safety and efficiency

Condition: good (used), - Capacity : max. 3000 bph - With cork presence control, at the inlet - Cork dust blow-off on the bottle - With capsule applicator - With shrink head Podpfx Ahsralrus Uoha - Running direction: left - right - Machine completely overhauled - Machine in very good condition

Year of construction: 2002, condition: ready for operation (used), Output: 30-50/min, connected load: 20kW, length: 9500mm, width: 3500mm, height: 2200mm, including documentation. Pedpfxsh Rykuj Ah Ueha

Condition: used, Year of construction: 2005, Shrink-tunnel Additional title: with 2 parallel belts (incl. sleeve fit control) Psdpfjvcq E Dox Ah Uoha Air volume: 700 m³/h Engine speed: 900 rpm Power: 0,25 kW Length: 3 m Width: 1,25 m Height: 2,1 m Weight: 500 kg Operation / Control: with control panel for each conveyor Features: Two parallel conveyors going through the unit coming from 2 sleevers, optical sleeve fit control with conveyor stop

Condition: good (used), Year of construction: 2015, operating hours: 5,842 h, functionality: fully functional, machine/vehicle number: 2/362594/15, input voltage: 400 V, compressed air connection: 6 bar, input current: 25 A, input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Equipment: documentation/manual, This is a "Meurer Filmline CMB 600 machine", which is no longer in use due to a change in the product range. Shrink film packaging machine with shrink tunnel FILMline CMB 600 Podowxtktspfx Ah Usha The machine is immediately available, has no defects, and is in excellent condition. The current operating hours are 5,842 hours. The dimensions of the machine can be found in the attached document. The machine has been serviced regularly and can be inspected if required. In addition, all original operation manuals (in German and English) as well as electrical diagrams are available in duplicate as folders. Banding performance: 35 products/min Bundle capacity range: 1x5 / 1x10 Product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm Bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm Machine dimensions X/Y: approx. 3300mm / 3020mm A video of the running production can be provided on request.

Condition: as good as new (ex-display), Year of construction: 2024, THE “GIANT” OF SHRINK PACKS Here is the Dibipack 85130 model, a new addition to the Italdibipack range of EXTRA-LARGE “One-step®” systems, theDibipack BIG, the largest models in the Dibipack range, conceived and designed to offer the best answer to the increasing demand for a large machine with large capacity and high performance. Ideal to pack large size and large surface products such as frames, pictures and panels TECHNICAL SPECIFICATIONS TECHNICAL DATA – DIBIPACK 85130 Voltage supply: 400 V - 3 Ph + N Maximum required power: 8 KW Overall dimensions of the machine L x W x H: 2700 x 1500 x 1400 (H) mm Worktop height (on stand): 900 mm Machine weight: 300 kg Sealing area W x L: 850 x 1300 mm Maximum product height: 250 mm on request Impulse sealing system: bottom knife Maximum roll dimensions DIA x B: 250 x 1200 mm Psdsmv Engepfx Ah Ueha Output: 4 - 6 pieces / min Notes: We reserve the right to make technical changes. The performance depends on the operator and the type of packaging. MORE INFORMATION An excellent result obtained by the Italdibipack Research and Development team, which gathered all the market needs and transformed them into a successful solution. With this new “giant”, the Dibipack 75125 and Dibipack 85150 models are “retired” thanks to the new dimensions of the sealing bars (850 x 1300 mm) that can accommodate a larger range of dimensions of the product. This new model has the same specifications as the shrink wrapping machines of the Dibipack line, but with some peculiarities: for example, two holding magnets that keep the hood closed during the work cycle and two fans that ensure better heat circulation. The machine works with heat seal and shrink films such as PVC (BLUE FILM) or polyolefin films (GREEN FILM – GOLD FILM). The machine is manufactured in accordance with CE regulations.

Condition: used, Year of construction: 1999, Used Shrink Wrapper OCME VEGA S 60-2-F 48000 bph The used shrink wrapper OCME VEGA S 60-2-F is a high-performance and reliable packaging solution, ideal for wrapping bottles, cans, or other containers using shrink film. Designed for high-speed production lines, this machine can achieve an impressive output of up to 48,000 bottles per hour (BPH), making it suitable for large-scale production needs while ensuring accuracy and efficiency. Main Features Model: OCME VEGA S 60-2-F Maximum speed: Up to 48,000 bottles per hour Configuration: Operates on 2 tracks to optimize production capacity Supported formats: Various bundle configurations such as 3×2, 4×3, and 6×4, compatible with PET bottles, glass bottles, or cans Packaging material: Shrink film, with or without tray support The OCME VEGA S 60-2-F is engineered to support different formats, enabling flexibility in meeting various packaging requirements. With its dual-track setup, the machine maximizes production efficiency, ensuring consistent throughput even during intensive operation. Benefits of the OCME VEGA S 60-2-F High productivity: Thanks to its dual-track design, the machine is tailored to meet the needs of high-demand production environments, such as large beverage or food processing plants. Format versatility: It seamlessly handles multiple packaging configurations, whether you need multipacks for retail or bulk distribution. Energy efficiency: Designed with optimized thermal systems to reduce energy consumption while maintaining fast and reliable shrink wrapping. Robust and reliable: Built with industrial-grade components, the machine ensures long-lasting operation, even in challenging production settings. Easy maintenance: Features accessible components for fast, routine maintenance and minimal downtime, enhancing productivity on the production floor. Applications The OCME VEGA S 60-2-F is versatile and ideal for various applications, including: Phjdsvgu Dxjpfx Ah Uea PET or glass bottles: Suitable for packaging water, soft drinks, beer, and oils. Cans: Designed to handle beverage cans for soft drinks, beer, or food products. Other containers: Handles a wide range of plastic, glass, or composite containers, making it suitable for both food and non-food industries. The ability to switch between different formats and configurations ensures that the machine is ready to adapt to changing production demands. Whether you are packing small retail units or larger multipacks, this machine guarantees flexible operation without sacrificing efficiency. Why Choose a Used OCME VEGA S 60-2-F? Opting for a used shrink wrapper like the OCME VEGA S 60-2-F offers businesses the opportunity to acquire premium packaging equipment at a fraction of the cost of a new machine. Each unit undergoes rigorous inspection, testing, and servicing to ensure full functionality and operational readiness before delivery.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, The machine is fully operational. CMC PRATICA poly foil wrapping machine. Year 2009 and not used that much by its former owner. Pedoxlgp Tepfx Ah Uoha

Condition: used, Fully automatic packaging machine for products such as cans, glass bottles, and plastic bottles in shrink film, resulting in packs/bundles with a specified number of products. The machine is of solid Italian construction, characterized by reliability and easy changeover for products of various sizes. Manufacturer: ZVT Model: PSP 032 S Maximum output: 30 cycles/min (two rows) Output for 1.5 L bottles: max. 21,000 bph Output for 0.5 L bottles: max. 43,000 bph Electrical power: 94 kW Podpexpn Edofx Ah Ujha Air requirement: 7 l/min/cycle Dimensions: installation length approx. 10,000 mm, width approx. 1,700 mm, height: 2,000 mm. Complete and original technical documentation. Technical condition: used machine.

Condition: good (used), Year of construction: 2019, operating hours: 1,500 h, functionality: fully functional, total length: 2,420 mm, total height: 1,650 mm, total width: 13,600 mm, type of input current: three-phase, product height (max.): 250 mm, product width (max.): 630 mm, input voltage: 400 V, overall weight: 710 kg, power: 29 kW (39.43 HP), Ulma shrink tunnel. Only used as a replacement machine. Very good condition. Speed: 3 - 14.5 m/min | Double heating chamber | Dimensions: 2,420 x 1,360 x 1.650 mm | Weight: 710 kg | AIR FLOW CONTROL THROUGH FREQUENCY CONVERTER AND SOLID STATE RELAY | SHRINK TUNNEL PRECHAMBER AT INLET AND OUTLET | 220 MM HIGH CHAMBER | LEFT VERSION, PRODUCT RUNS FROM RIGHT TO LEFT | SELECTION FOR PURE "TRANSPORT MODE". Hot air fixation tunnel, an ULMA shrink tunnel model designed for shrinking film around previously packaged products. (Products previously packaged in side sealers, banding machines, flow wrappers, overlapping machines or any other packaging machine). Tunnel with high heating capacity, low consumption and low heat loss. Pedpfx Aetva Sgeh Uoha Solid painted tubular steel frame. Easy integration into existing lines. Height-adjustable machine feet and wheels for installation and transportation. Product flow of the machine from right to left. Movable rollers with silicone coating. Electronic temperature control. Control of the transport speed. Air is evenly distributed inside the chamber, guaranteeing great energy savings. Maximum insulation to reduce heat loss. Electric cabinet with ventilation. Protective devices and safety systems in accordance with CE standards. Consumption: 14.5 KW/h

Condition: new, Year of construction: 2024, Shrink wrapping machines with simplified technology, advanced control logic and cycle management, designed to guarantee high application performances together with great user-friendliness and easy maintenance. Warranty: 12 months (single-shift operation), Pedpfx Ahehtuu As Ueha Technical specifications: Sealing area W x L: 420 x 550 mm Max. product height: 150 mm Mains voltage: 230 V - 1 Ph Power: 3 KW Dimension L x W: 1235 x 750 mm Height of work table with trolley: 920 mm

Condition: used, Year of construction: 2001, Used Shrink Wrapper SMI SK 450T – 45 ppm – tray If you’re in the market for a top-tier shrink wrapping solution, look no further than the SMI SK 450T. This machine, crafted by the renowned brand SMI in 2001, represents a pinnacle of engineering and design, catering to your packaging needs with precision and reliability. Machine Specifications: Machine Type: Shrinkwrapper Brand: SMI Model: SK 450T Year of Construction: 2001 Max Speed: 45 packs per minute (ppm) Container Material: Glass Max Container Height: 340 mm Package Type: Film Tray Number of Slopes: 6 Max Reel Size: 500 mm Number of Reels: 2 Operator Side: Right Condition: As It Is Warranty: 6 Months Enhanced Efficiency and Versatility: The SMI SK 450T is engineered to elevate your packaging operations with its remarkable speed of up to 45 packs per minute. Its compatibility with glass containers and film trays ensures a sleek and professional presentation for your products. Precision and Flexibility in Packaging: With six slopes accommodating various container sizes and a maximum reel size of 500 mm, the SK 450T can accommodate diverse packaging requirements, providing the precision and flexibility your production demands. Seamless Operation and Monitoring: The SK 450T is equipped with an intuitive Human Machine Interface (HMI). Programmable Logic Controller (PLC), both developed by SMI. This guarantees ease of operation and comprehensive monitoring of the machine’s performance. Crafted for Optimal Ergonomics: The machine’s worktop height of 1200 mm is meticulously designed to provide ergonomic comfort during operation, reducing operator fatigue and boosting productivity. Satisfy Your Packaging Needs with Confidence: Don’t miss the opportunity to optimize your packaging process with the exceptional SMI SK 450T Shrink Wrapper. This machine’s advanced features, coupled with its reputation for performance and durability, make it a must-have for businesses seeking a competitive edge. Pedpfx Ahjvgudxe Usha Reach out to us today to learn more about the SMI SK 450T and how it can revolutionize your packaging operations. Elevate your production efficiency and product presentation with this premium shrink wrapping solution from SMI.

Condition: used, Year of construction: 2008, operating hours: 2,000 h, Used Shrink Wrapper Zambelli LFT 30 S/F Manufacturer: ZAMBELLI, Italia – 2008. Model: LFT 30 Capacity: 30 packs/min Working hours: only 2,100 Packer is for PET bottles only 1.5 – 2.0 – 2.5 l (packs 3×2) Not for smaller bottle volumes Packaging with foil without pad The machine is still connected. Preserved in good condition. General Description Machine for packaging in heat-retractable material, continuous movement, no sealers, Latest generation for medium and high production levels. Phjdpovguwxjfx Ah Uja Maximum speed depending on machine model type of product and bundle to be formed Unique design features in this type of machine: no mechanical parts on the operator side, thus giving great accessibility. mechanical parts grouped on opposite side to operator, thus making all routine and non-routine maintenance jobs simpler and faster. Used Shrink Wrapper Great range of choice, both in formats and versions. Simple and very quick format change. Electronic film unwinding and cutting. Film cutting with rotating blade. Usable film thickness from 40μ to 80μ. Possibility of using large reel size giving maximum working autonomy. The whole machine functions are supervised and controlled by a Zambelli computer. Machine complete with all safeguards, in accordance with current safety regulations. All machine configurations with possibility of working on a number of tracks. Vast range of optionals, including: computer for production data processing, antistatic bar, print registration, etc. The computer is particularly useful in that it can also be used for the careful planning of the machine’s preventive maintenance schedules. The controls are centrally grouped on an on-board control panel. All the motors are protected with automatic magnetothermal switches. Special care has been taken in the design stage to ensure that the machine is simple to run, with easy access for maintenance work. All the mechanical parts are grouped on the opposite side to the operator, for the following reasons: a) To allow access to the product with the minimum number of obstacles. b) To give maximum access for all routine and non-routine maintenance jobs, making them as quick and easy as possible. c) To simplify enormously all operations on the product conveyor belts, especially belt changing operations. OPERATIVE FLOW LFT 30 S/F The products reach the machine with the help of a feed belt positioned in line with the outfeed. A proper device divides up the required number of rows into the infeed guides. A sensor upstream of the feed controls the quantity of product. If the quantity of incoming falls below the minimum set level, the machine will slowly decelerate and stop.