Used Shrink Films for sale (1,672)

Condition: excellent (used), Year of construction: 1991, Manufacturer: Kalfass Pgsb Aeq Htfnsz Hpn Esr Model Number: Universa8060 Rate 40units/min Productdimensions 750x 500 x 140mm Maximum width 800mm Dimensions Welder2200 x 1400 x 1800 mm - Oven 1750 x 1350 x 1300mm -Mat 1700 x 600 x 1100 mm (band width 400mm) Compact L-sealer with shrink oven Created for the demand of industrialapplications Gujdpjq Htfnefx Alaei The Kallfass 8060/650 compact L-sealers in combination with high-performance shrinktunnels. The qualities of this series of machines becomeevident when Subjected to hard, continuous use.

Condition: used, Manufacturer: MSK Gusdpeq U Rhpofx Alasi Tip: KOMBI-MULTITECH Year of manufacture: 2007 manual The device is already disassembled and can be delivered immediately!

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Gusdpfx Alswg Sd Ujaji Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: used, Year of construction: 2007, functionality: fully functional, Universa 500 Servo with Kallfass Compact Tunnel Year of manufacture: 2007 Gedpfx Alsy Nxvpsaeui The machine will be cleaned and overhauled prior to delivery. Installation and training in Western Europe and parts of Eastern Europe are included in the purchase price. The Universa 500 Servo is a film packaging machine with a continuous motion sealing bar. The output is specified as up to 100 cycles per minute, depending on the type of film and product. The sealing bar has a width of 550 mm. The maximum product height is 200 mm. Packaging performance depending on product and film: 100 cycles/min Length of cross sealing bar: 550 mm Max. passage height of sealing bar: 200 mm Min. product length: 80 mm Film: centre-folded film, approx. 12 - 80 µm Film roll holder: arranged at floor level for easy loading Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Conveyor speed: variable 10 - 40 m/min Sealing system: continuously heated sealing bar with replaceable sealing strip, temperature control and monitoring PLC user interface: Touch panel, SIEMENS TP 270 Programmable logic controller: SIMOTION® by SIEMENS® Film and product transport via vacuum conveyor to the continuous motion cross sealing unit Replaceable sealing strip; available in different profile shapes for optimal sealing seam quality depending on product and film Position-controlled product flow. No tedious readjustment of timing values required when changing formats or speed Power supply: 400 V three-phase, 50 Hz with protective earth, without cable and plug Rated power: 5 kVA Rated current (at 400 V): 7.3 A Available languages: German, English, French

Year of construction: 2026, condition: new, The Mini Film Waste Pelletizing Line is designed for recycling low-bulk-density polymer waste at relatively low production capacities. It is a compact solution for processing film production waste and other lightweight plastic materials into reusable pellets. The system can process plastic film in either shredded or non-shredded form, depending on the type and condition of the material. 1. Output Range: 70~90Kg/hour 2. Standard Electricity:380V/3 Phases/50 Hz 3. Main Motor Power: 18.5 кW 4. Total Power: 29 кW 5. Screw Dia. : 90mm 6. Filter: Dual stations manual filter 7. Cooling Method: air cooled 8. Material feeder pusher: equiped 9. Application: LDPE, HDPE, LLDPE pelletizing, scraps or rolls Gedpfxez Alnpj Alaeui

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Automatic capper for PVC, polylaminate, tin and champagne capsules, suitable for bottling plants with medium to high production capacities. Frame completely covered with stainless steel sheet, automatic dispenser for capsules Godpehx D Dusfx Alaoui

Condition: excellent (used), Dimensions of the entrance opening 400x200 Dimensions Length 2995 mm Width 1250 mm Gedpfx Alotrtztsajui Height 1550 mm

Condition: good (used), Year of construction: 2019, operating hours: 1,500 h, functionality: fully functional, total length: 2,420 mm, total height: 1,650 mm, total width: 13,600 mm, type of input current: three-phase, product height (max.): 250 mm, product width (max.): 630 mm, input voltage: 400 V, overall weight: 710 kg, power: 29 kW (39.43 HP), Ulma shrink tunnel. Only used as a replacement machine. Very good condition. Speed: 3 - 14.5 m/min | Double heating chamber | Dimensions: 2,420 x 1,360 x 1.650 mm | Weight: 710 kg | AIR FLOW CONTROL THROUGH FREQUENCY CONVERTER AND SOLID STATE RELAY | SHRINK TUNNEL PRECHAMBER AT INLET AND OUTLET | 220 MM HIGH CHAMBER | LEFT VERSION, PRODUCT RUNS FROM RIGHT TO LEFT | SELECTION FOR PURE "TRANSPORT MODE". Hot air fixation tunnel, an ULMA shrink tunnel model designed for shrinking film around previously packaged products. (Products previously packaged in side sealers, banding machines, flow wrappers, overlapping machines or any other packaging machine). Tunnel with high heating capacity, low consumption and low heat loss. Solid painted tubular steel frame. Easy integration into existing lines. Height-adjustable machine feet and wheels for installation and transportation. Product flow of the machine from right to left. Movable rollers with silicone coating. Electronic temperature control. Control of the transport speed. Air is evenly distributed inside the chamber, guaranteeing great energy savings. Maximum insulation to reduce heat loss. Electric cabinet with ventilation. Gjdstva Sgopfx Alasui Protective devices and safety systems in accordance with CE standards. Consumption: 14.5 KW/h

Condition: good (used), - Unused - Maximum working width 700 mm Gujdorhib Ispfx Alaji - 2 rollers 1 x top 1 x bottom - Simultaneous wrapping of top and bottom side for many materials, glass, mirror splinter protection film, - metal, other smooth sheets - Roller conveyors available for supply and removal - Price on request

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Gsdexnzlhopfx Alajui Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Year of construction: 1965, condition: ready for operation (used), Suitable for the production of rigid PVC films with a minimum plasticizer content of 3%, number of rollers: 5, with documentation, retrofit 2003 and 2017. Guedpfxjquu Tto Alaei

Condition: excellent (used), functionality: fully functional, Production lines for fruit and vegetable preserves. A significant portion of the equipment is newer – from 2011 and 2014 – supplemented by older, robust machines that have proven their reliability through years of continuous operation. The machines are sold as a complete line. Line capacity (based on an example product) – approximately 1200 liter jars/hour (~1.5 tons/hour). This translates to approximately 28,800 jars/day, or ~36 tons/day. (I) What can be produced on this line: - Compotes (jars, bottles) - Jams and thick preserves - Juices (bottle filling, tube pasteurization) - Canned goods (sterilization in an autoclave) - Pasteurized preserves in jars (pickles, vegetables, sauces) (II) Process flow: 1. Product dosing – into buckets, jars (2 dosing machines) 2. Filling – bottles (filling machine), cans (dosing machine + seamer) 3. Thermal processing – boiling tank, evaporators (juice/puree concentration), tube pasteurizer (liquid product before filling) 4. Packaging closing – sealers (bottles, jars), capping machine 5. Sterilization/pasteurization of finished packaging – autoclave (cans, jars), tunnel pasteurizers (3 units) 6. Labeling – labelers for bottles, jars and cartons 7. Collective packaging – heat tunnels (shrink film), conveyors Gujdsz Daatopfx Alaji (III) Equipment list: 1. Carton labeler 2. Heat tunnel (shrink film) 3. Conveyors 4. Heat tunnel 5. Bottle labeler 6. Jar/bottle labeler 7. Heat tunnel x 3 8. Labeler (without control panel) 9. Tunnel pasteurizer x2 10. Dosing machine for buckets 11. Dosing machine + seamer for cans 12. Pleszew Autoclave (2011) 13. Tunnel pasteurizer 14. Dosing machine 15. Capping machine 16. Seamer 17. Bottle filling machine 18. Jar seamer 19. Dosing machine for jars x2 20. Tube pasteurizer 21. Evaporator x3 22. Boiling tank Total value: 2,380,000 PLN = ~ 545,000 EUR (IV) Why buy the entire line: Complete process line – from dosing to collective packaging – without the need to find missing components. Option for pickup with dismantling and transportation (to be agreed upon). Equipment used in production – documented history of use. Flexible sales options: entire line, separate technological units (e.g., canned goods section with autoclave, bottle filling section), or individual machines. Terms: Visit possible by prior arrangement. Transportation and dismantling to be agreed upon.

Condition: used, Year of construction: 2001, functionality: fully functional, We have a Buhrs 1500 poly wrapping system available. Year 2001. This system is not very often used last years by former owner. The system will be delivered completely with vacuumpumps, so complete. SYSTEM INFORMATION System brand: Buhrs Machine type: Buhrs 1500 Poly Wrapping System (max.13.000 c/h) Year: 2001 Gujdpfex Agk Sox Alaei CONFIGURATION 1 Buhrs 1500 main product feeder, type shuttle feeder 1 Buhrs 1500 master base station 4 Buhrs 1500 rotary feeder 1 Buhrs 1500 module for filmpackaging Machine can be seen running!!!!

Condition: new, Year of construction: 2025, PRO-version automatic side sealer, suitable for products without any length restriction. Sealing position (where the sealing bar and the counterpart meet) adjustable in height for a centrally positioned sealing seam. Quick change perforating pins. Ideal to be combined with AMTEC SHRINKtunnel POF-XL (high speed) PRO-version. Touch screen for control and setting, easy to operate. Easy film reloading near floor. Optional available: stacker systems for shrink wrapped panels, etc. - Specifications: max. speed of the machine in neutral: 60 cycles/minute; max. package size: L(100- unlimited)xW(80-600)xH(2-180) mm; sealing blade width: 800 mm; 220V/4.5kW; 6bar; machine dimensions: L2240xW2250xH1480 mm. Gusdov Nl Exepfx Alaei Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; max. packaging size: L(80-700)xW(80-380)xH(5-180) mm; sealing blade length: 530mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L4755xW1660xH1370 mm. Godpfx Aljv Nl Hieaeui Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2006, machine/vehicle number: LC564, Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line includes, among other components, an AF high-pressure compressor (model CE46A) and a Fusheng low-pressure compressor (model SA110A). In addition, a BAC cooling tower manages process temperatures effectively. The SIDEL SB014 blow molder, which includes a hopper, feeder, and dust remover, connects directly to the SIDEL SFGL40/10 filling machine. Consequently, the line maintains efficiency across all stages. Labeling and packaging SIDEL integrated a Rollquattro labeler that applies roll-fed wraparound labels with precision. Moreover, a shrink-wrapper creates stable multi-pack bundles using plastic film. The VANTA WSD-B350 carton packer, built in 2011, handles up to 35 cartons per minute. Likewise, a palletizer automates the end-of-line phase, thereby preparing products for shipment. Conveying system and internal logistics The conveying system uses SIDEL-built conveyors throughout the process. Accordingly, the line ensures uninterrupted flow from the blow molder to the palletizer. Thanks to this automation, the system reduces manual intervention and improves consistency. In contrast to fragmented setups, this configuration enhances operational control and reduces downtime. Operating conditions and advantages This used bottling line SIDEL for still water in PET bottles 25200 bph operates under power and remains available for on-site testing. In practice, the integration of SIDEL machines improves performance while simplifying maintenance. As such, operators can rely on uniform quality and long-term reliability. Applications and compatibility The line suits facilities bottling still water in PET containers of multiple sizes. Importantly, its modular design enables quick format changes with minimal disruption. Because of this, companies can adapt to different production requirements. Notably, the system supports both small batches and high-volume output. T... Gedpfx Alew Ahfysajui

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 Gjdpexm Rwqofx Alasui 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm Cutting area up to 80x200 mm Stroke length: max. 800 mm with digital display Saw blade RPM: 2,000 - 3,800 rpm. Piece counter with automatic shut-off when the target value is reached Continuously adjustable pneumatic material feed Hydro-pneumatic saw feed Pneumatic material clamps Spray device Gusdpfoxn Iq Djx Alaei Including user manual Machine dimensions: 2100 x 1100 x 1500 mm (W x D x H) 1000 kg

Condition: used, Year of construction: 2008, operating hours: 8,000 h, machine/vehicle number: ET229, SACMI OPP Roll-fed Labeling Machine – Overview This used SACMI OPP roll-fed labeling machine is configured for high-efficiency wrap-around label application on PET bottles. Built in 2008 and designed for modern beverage production, it integrates seamlessly into a used bottling line or can operate as a standalone station within industrial packaging environments. With a nominal capacity of 12,000 bottles per hour, it is well suited for medium-speed operations in water, juice, and other beverage segments that use OPP film labels. SACMI engineering is known for durability, precision, and reliability, making this second hand labeling solution a strong fit for producers seeking dependable bottling equipment. The machine supports multiple PET bottle formats, including 1.5L, 0.6L, and 0.33L sizes, providing flexibility for varied SKUs and seasonal product runs. OPP film labels, applied as roll-fed wrap-around, help reduce labeling costs and improve presentation quality with clean seams and consistent label placement. This configuration is a practical choice for beverage production facilities looking to upgrade or expand capacity while maintaining a compact footprint and streamlined integration into existing conveyors and handling systems. Technical Specifications & Performance Data Manufacturer: SACMI Year: 2008 Label type: OPP foil (roll-fed) Guodpfxjxvpd Uj Alaei Production speed: 12,000 bph (nominal) Bottle formats: 1.5L, 0.6L, 0.33L Container material: PET Advanced Automation & Control Systems The OPP roll-fed concept leverages hot-melt application at the leading and trailing edges of the label for secure wrap-around results. The design supports stable bottle handling, precise label feed, and consistent cutting for high-quality presentation. Controls are straightforward for operators, with clear access to key adjustments and process parameters to support quick setup and format changes. Production Line Integration Capabilities This labeling machine integrates easily into complete bottling lines and industrial packaging systems. It can operate inline with upstream filling and downstream inspection, packing, or shrink wrapping equipment. Format changeovers accommodate common PET bottle sizes such as 0.33L, 0.6L, and 1.5L, allowing multi-product flexibility across beverage portfolios within a single production line. Machine Condition & Maintenance History The unit has approximately 10,000 working hours. It is currently disconnected from the line but can be powered to demonstrate bottle transport. The machine can start and run, with label gluing disabled for demonstration purposes. Technical documentation is available, supporting commissioning, operation, and maintenance. Overall, the machine presents as a well-kept second hand asset suitable for facilities seeking reliable labeling performance at medium speeds. Operational Performance & Versatility Optimized for PET bottle labeling with OPP film, the machine delivers consistent wrap-around application across multiple formats. It is suitable for beverage production scenarios where high presentation quality and material efficiency are important. The roll-fed approach offers a cost-effective alternative to pre-cut labels while maintaining r...

Condition: good (used), Packing Line, Packing Machine, Hood Shrink Machine, Hood Shrinker, Film Wrapping Machine, Sealing Tool Sealing Tool, Tray Sealing Machine, Tray Sealer Gusdom Hd Rhjpfx Alaji -Manufacturer: Reepack, sealing tool from tray sealing machine Inauen VC999/ TS 1200 N -Type.: 342201270 -Shell size: 270 x 170 mm -Cutting die: see photos for size -Dimensions machine: 540/520/H220 mm -Weight 49 kg

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide, E&L Gujdpfx Aszkru Eolaji Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Condition: used, machine/vehicle number: LC682, Used AVE 16-16-4 filling line, still & sparkling water - 2 PET blowerTechnical Specifications & Performance DataThis used bottling line is configured for beverage production in 0.33L, 0.5L and 1.5L bottle formats. The AVE filling line, manufactured in 2008, is designed for spring water and flavored water. Its stated capacity reaches 6,000 bph for 0.5L bottles and 2,500 bph for 1.5L bottles.Production capacity: 6,000 bph for 0.5L bottlesProduction capacity: 2,500 bph for 1.5L bottlesCompatible formats: 0.33L, 0.5L and 1.5LFilling monoblock configuration: 16/16/4 rinser, filler and capperCap specification: 28mm plastic screw cap, PCO 1881 neck finishSMF Combi 200 blow molding machine: 2003, 700 kg, 3 x 380 V, 28 kW, 50 HzSMF Combi 400 blow molding machine: 2016Advanced Automation & Control SystemsThe line combines bottle forming, conveying, filling, capping, labeling and shrink wrapping equipment for coordinated industrial packaging operations. The SMF Combi 200 blow molding machine operates on 3 x 380 V electrical supply at 50 Hz and has an installed power of 28 kW. Bottle lifters on the filler support stable container handling through the filling process.The included POSIMAT bottle handling system, manufactured in 1992, places 0.5L bottles onto the conveyor belt. Conveyor belts are included to provide material flow between the available equipment.Production Line Integration CapabilitiesThis second hand used bottling line supports PET bottle blowing and beverage bottling, while the AVE filler is also able to fill glass bottles. The process layout includes blow molding equipment, bottle orientation and conveying, a rinser-filler-capper triblock, labeling and shrink-film secondary packaging.Machine typeManufacturer / modelYearBlow Molding MachineSMF Combi 2002003Blow Molding MachineSMF Combi 4002016Various EquipmentPOSIMAT bottle placement system1992Filling MonoblockAVE 16/16/42008Labeling MachineAVE2008Shrink WrapperAVE2008Various EquipmentConveyor beltsThe AVE labeling machine handles paper, hot-applied and cut labels. T... Guodpfjz E Dd Ssx Alaji

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, air demand: 7.08 m³/h, year of last overhaul: 2025, air pressure: 87 bar, film width: 360 mm, product height (max.): 430 mm, product height (min.): 110 mm, product length (max.): 600 mm, product length (min.): 300 mm, The SAVOYE INTELIS packing machine is a fully automatic packaging line designed for packing products in corrugated cardboard boxes. The unit was manufactured in France in 2016 and features a modular plug & play architecture, enabling quick assembly, disassembly and adaptation of the process to current logistics requirements. This machine is suitable for medium to large distribution centers, e-commerce operations, contract logistics providers, and manufacturing plants. Its capacity is up to 840 cartons/hour, with a maximum single package weight of up to 32 kg. The packaging line consists of the following components (as per documentation): Guodjx Uphgopfx Alasi INTELIS F12 – Carton erector – automatic forming of boxes from corrugated board. INTELIS T18 – Shrink tunnel – carton and film stabilization through thermal shrinkage. INTELIS C12 – Carton closer – lid application and final closing of the carton. NORDSON PROBLUE – Glue application system – professional glue applicator for packaging. Key features: - Fully automated packing cycle. - Forming, shrinking, closing, and preparing parcels for shipment. - Stable and energy-efficient transport system – conveyors with integrated roller drives. - Intelligent speed and load adjustment. - ECO mode with regenerative braking energy recovery. Technical specifications: PLC: TSXP572634M Throughput: 840 cartons/hour Carton dimensions: • min. 300 × 200 × 110 mm • max. 600 × 400 × 430 mm Max. package weight: 32 kg Power: 5 kVA Power supply: 3-phase 400 V

Condition: used, Year of construction: 2005, operating hours: 45,000 h, machine/vehicle number: LC514, Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow.  Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 2005, forms the bottles at the core of the process. Notably, this machine transforms preforms into finished bottles using high pressure compressed air. Therefore, SIDEL technology ensures precise shaping and optimizes PET material usage, minimizing waste. Gujdpfxevgva Us Alaji Filling Monoblock The Sidel 36 36 9 filling monoblock, also from 2005, performs rinsing, filling, and capping in a single compact unit. This design maximizes space efficiency and reduces transfer times between stages. Consequently, the volumetric filling system delivers precise dosing, which ensures the final product quality. Labeling Machine The PE Labellers ROLLMATIC labeling machine, from 2005, applies wrap around labels to containers. Advanced technology positions labels accurately, thus enhancing the finished product appearance. This system works perfectly for PET water bottles, meeting the line speed and quality requirements. Shrink Wrapper The Sidel Cermex shrink wrapper, from 2005, performs secondary packaging. Specifically, the machine uses shrink film to create compact and secure packs. As a result, this process enhances logistics and product distribution while protecting items during transport. Conveyors in the Used Bottling Line SIDEL for still water up to 12000 bph The line operates with a complete system of conveyors, both air and ground. These conveyors maintain a continuous and uninterrupted flow between production stages. Additionally, the conveyors minimize downtime and ensure high operational efficiency. Technical advantages of the line This used bottling line delivers reliability and robustness, even with its 2005 manufacturing date. Moreover, all machines ensure a long operational life and reduce maintenance costs. The system efficiently bottles still water, ensuring a specific and contamination free process. Furthermore, SIDEL machinery integrates seamlessly with complementary components, such as the labeling machine and shrink wrapper, to maintain a uniform production flow. With a speed of 12000 bottles per hour, this line supports companies with consistent production demands. Conclusion The used SIDEL bottling line for still water up to 12000 bottles per hour provides a reliable and highly efficient solution for the bottling sector. Therefore, with robust machinery and an optimized configuration, it meets the needs of technicians and experts requiring a complete solution for producing PET water bottles.

Condition: good (used), packaging system, packaging machine, hood shrink machine, hood shrinker, film packaging machine, sealing tool, tray sealing machine, tray sealer -Manufacturer: Reepack, Sealing Tool from tray sealing machine -Type: 342201270 -Shell size/cutting shape: dimensions see photos Gujdpsvrccaofx Alasi -Machine dimensions: 485/400/H220 mm -Weight: 36 kg