Used Shrink Hood Machine for sale (83,886)

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Shrink Tunnel Compact 650 D Year of construction: 2008 Psdpfxswmcuwo Ah Ueha Dimensions: approx. 2600 x 1500 x 1400 mm (LxWxH) Weight: approx. 750 kg net / 830 kg gross Technical specifications: Tunnel passage width: 650 mm Tunnel passage height: 200 mm Length of heated tunnel hood: 1800 mm Working height: 800 - 900 mm Power supply: 400 V three-phase current Energy consumption: approx. 6 kWh Rated current at 400 V: 21.0 A in single-unit operation Compact and economical shrink tunnel with the patented ring nozzle heating system and particularly effective air flow regulation. Equipped with a continuously adjustable plastic link belt. This tunnel is particularly suitable for shrinking small to medium-sized products. Viewings and demonstrations are available at our premises by appointment. Functional guarantee, no warranty.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, table width: 1,700 mm, table length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Phjdjvvlyijpfx Ah Usa Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 190572, total length: 2,000 mm, total height: 1,650 mm, total width: 550 mm, type of input current: three-phase, product height (max.): 250 mm, product height (min.): 50 mm, product width (max.): 200 mm, input voltage: 400 V, power: 10 kW (13.60 HP), feed rate X-axis: 300 m/min, temperature: 175 °C, This is an unused shrink tunnel system with a corresponding conveyor belt. Podpfx Ahev Dixro Ueha It was purchased a few years ago but never used. Its functionality is therefore fully guaranteed. For more information, please feel free to contact us.

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 11,000 mm, length of welding knife: 450 mm, pass-through height: 200 mm, input frequency: 50 Hz, nominal power: 19 kW (25.83 HP), Hugo Beck film packaging system Servo X with shrink tunnel SL5015, including 2 pusher feeders and 1 rotary feeder The machine was manufactured in 2012. The system operates with center-folded film. Products can be fed either manually or via the three included feeders into the product line, which then conveys them into the center-folded film. The product is then sealed on three sides and subsequently shrunk in the shrink tunnel. Pjdow E Im Aopfx Ah Ujha The system comprises: 1 x NEO X film packaging system 1 x Hugo Beck shrink tunnel SL5015 1 x rotary feeder TA 4415 2 x universal feeders HB 350 Installation and servicing—either for this unit or machines from other manufacturers—can be offered if required. Subject to prior sale. The price is EXW. Technical data provided without guarantee.

Condition: new, Year of construction: 2020, functionality: fully functional, --- ### nNewest automatic sealing machine type L Phedpfx Aetxl D Deh Uoa Brand: nNewest Product category: Packaging machines Description: The News Automatic Sealing Machine Type L is a versatile solution that is widely used in various industries. It offers high flexibility and performance in the packaging of various products. The machine is easy to install and operate, with a robust stainless steel construction for durability. Technical specifications: - Capacity: 50 pieces/minute - Voltage: 380V / 50-60Hz / 3-phase - Main material: Stainless steel - Compatible packaging materials: PVC, PP, POF - Features: Extra-long shrink tunnel, intelligent temperature controller, closing thermal wind internal circuits - Accessories: Standard with loading and cooling zone, heat-resistant, powder-coated carrier, stainless steel conveyor roller with silicone coating, performance-coated tunnel covers, electrical control panel Location and collection: - Collection possible in 14547 Beelitz - Shipping possible for additional shipping costs For further information, please send us an e-mail or contact us via WhatsApp.

Condition: excellent (used), Year of construction: 2012, Description: Automatic film welding machine with downstream shrink tunnel. Can be used for all products that can be fed via the discharge table, e.g. wood briquettes. The machine is equipped with a conveyor belt to transport the packages through the shrink tunnel. The throughput time through the tunnel can be adjusted depending on the film thickness. The motor drive of the film rolls doses exactly the length of film required for the respective package. Work flow: The briquettes are placed manually on the table in the adjustable discharge frame. The two-hand operation triggers the discharge of the briquettes into the film curtain and the subsequent separation and sealing process. The package, now loosely wrapped in film, is picked up by the conveyor belt of the shrink tunnel and transported through the shrink tunnel. The film fits tightly to the contours of the package. After the now film-wrapped package has left the shrink tunnel, it should be left to cool for a while on an additional roller conveyor (see offer) so that the film hardens. The package can then be placed/stacked on a pallet. Phedpfx Ahevzn Hie Uja Technical data: Semi-automatic briquette band rolling machine with integrated single-chamber shrink tunnel for PE flat films 40-100. - Product feed into the machine via two buttons - Cycle output up to max. 8-10 containers/min. - Both film roll unwinders are motor-driven - Tunnel belt with frequency-controlled adjustable speed and adjustable air flow - Tunnel belt consisting of fiberglass rods with driven central chain, load capacity up to 30 kg. - Automatic tunnel switch-off - 760 mm welding bar - Max. roll size: 750 mm x 350 mm (WxD) - Product sizes: - 20-380 mm, 110-630 mm, 100-410 mm (HxLxW) (not all dimensions can be combined with each other.) - Product weight: 2-30 kg. - Control with 10 storable programs, piece counter, recording of product length - Machine can be moved on wheels and feet - Technical data: 400 V, 17 kW, 32A CEE plug, 6 bar constant, 17.6 NL/container - Machine weight: 600 kg. - Machine dimensions: 2890 mm x 1243 mm x max. 2065 mm (LxWxH) - Cooling fan group - Pressure rollers right and left at the tunnel exit - Light grid at the machine entrance -> one-hand operation

Condition: excellent (used), Dimensions of the entrance opening 400x200 Pedpfx Ahotrtzte Usha Dimensions Length 2995 mm Width 1250 mm Height 1550 mm

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 2,000 mm, total height: 1,700 mm, total width: 1,700 mm, overall weight: 800 kg, Film packaging machine with shrink tunnel. The BVM Brunner Compacta 4010 is a fully automatic side-sealing packaging machine for packaging products in semi-tubular film. It seals the film on three sides and achieves up to 100 cycles per minute. The machine is particularly suitable for the book, textile, and shipping industries, processes various types of film, and can be quickly adjusted to different product sizes. Ideal for efficient and flexible packaging. Pjdpfx Ahow E Imie Ueha No guarantee for technical specifications. The machine is checked and cleaned. EXW. On request, we also offer service and installation of the machine.

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 11,000 mm, length of welding knife: 450 mm, pass-through height: 200 mm, input frequency: 50 Hz, nominal power: 19 kW (25.83 HP), Hugo Beck film packaging system Servo X with shrink tunnel SL5015, including 2 pusher feeders and 1 rotary feeder. The machine was manufactured in 2011. Phjdew Eavijpfx Ah Uja The system operates with a center-folded film. The product is fed into the product line either manually or via the three included feeders. The line then conveys the product into the center-folded film, which is subsequently sealed on three sides and shrunk in the shrink tunnel. The system includes: 1 x Film packaging machine NEO X 1 x Hugo Beck shrink tunnel SL5015 1 x Rotary feeder TA 4415 2 x Universal feeders HB 350 On request, we also offer installation and service for this or systems from other manufacturers. Interim sale subject to prior sale. Price is EXW. No guarantee for technical data.

Condition: used, Year of construction: 2021, functionality: fully functional, The BP 800 is an automatic bundle packer. Products up to 760 mm wide and 380 mm high can be packed. - Semi-automatic bundle packer - Pneumatic piston - Swiveling PLC display - Adjustable air flow in tunnel - Transport rods made of heat-resistant fiberglass - LD-PE film 25 – 80 µm - Low energy consumption - Complies with EU standards Technical specifications Power supply: 380 V Output per minute: 10 bundles Usable sealing bar: 760 mm Maximum product height: 380 mm Maximum film roll width: 750 mm flat film Phodpfx Ahowth Dqe Uja Compressed air: 6 bar Working height: 945 - 1105 mm Machine dimensions: 2665 x 1410 x 2105 mm Weight: 605 kg Download data sheet

Condition: refurbished (used), Year of construction: 2007, Kallfass Universa 400 with Compact 650 SO shrink tunnel and 1000mm pre-belt Kallfass Universa 400, built in 2007 The system is available immediately. The price of the complete system includes the Universa 400. The machine is being technically overhauled and is in very good condition. Technical Specifications: - Length of cross-sealing die: 450 mm - Sealing die passage: max. 200 mm - Min. product length: 80 mm - Automatic length compensation to reduce the die gap - Film support plate available as an option - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing die with replaceable sealing bar - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2007 - Kallfass Compact 650 SO shrink tunnel - 1000 mm long pre-belt The cross-sealing and side sealing systems are currently being inspected and overhauled. Infeed and discharge belts, and conveyor belts will be checked and replaced if necessary. The machine will be available after inspection and repair at the end of April. Phsdpfxeh N Dwfj Ah Uja Installation of the system is included in Germany, Austria, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in full wrap and without film overlap. Product feeding is via a conveyor belt, with simultaneous wrapping in a semi-tubular film via a forming shoulder. Product timing is controlled by a light barrier. The feed belt is easily adjustable to accommodate different product widths. After the product is wrapped in film, it is transversely sealed using a continuously heated sealing system. Longitudinal sealing is achieved using a continuous side sealing device. The height of the forming shoulder and sealing devices is manually adjustable. The remaining film strip is taken up on a film rewinder. If required, we also offer installation and service on this machine or systems from other manufacturers. We reserve the right to sell the product at any time. Price is EXW. No guarantee is given for technical data.

Condition: refurbished (used), Year of construction: 2007, Kallfass Universa 400 with Compact 650 SO shrink tunnel and 1000mm pre-strip Phedpfx Ajiqtuwjh Usa Kallfass Universa 400, built in 2007 The system is available immediately. The price of the complete system includes the Universa 400. The machine is being technically overhauled and is in very good condition. Technical specifications: - Length of cross-sealing die: 450 mm - Sealing die passage: max. 200 mm - Min. product length: 80 mm - Film support plate optional - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing die with replaceable sealing bar - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2007 - Kallfass Compact 650SO shrink tunnel - 1000 mm long pre-belt The cross-sealing and side sealing systems are currently being inspected and overhauled. Infeed and discharge belts, and conveyor belts will be checked and replaced if necessary. The machine will be available after inspection and repair at the end of April. Installation of the system is included in Germany, Austria, Western Europe, parts of Eastern Europe, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in full wrap and without film overlap. Product feeding is via a conveyor belt, with simultaneous wrapping in a semi-tubular film via a forming shoulder. Product timing is achieved via a light barrier. The feed belt is easily adjustable to accommodate different product widths. After the product is wrapped in film, it is transversely sealed using a continuously heated sealing system. Longitudinal sealing is achieved using a continuous side sealing device. The height of the forming shoulder and sealing devices is manually adjustable. The remaining film strip is taken up on a film rewinder. If required, we also offer installation and service on this or systems from other manufacturers. Subject to prior sale. Prices are EXW. No guarantee is given for technical data.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), Phsdpfoxftqdex Ah Uja quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Phjdpfx Aox D U Aroh Uea Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: SL281 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT Podpfjirfpgsx Ah Usha COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: used, Year of construction: 2022, functionality: unexamined, CNC long-bed machining center, model CMA 3RD-CNC, year of manufacture 2022, serial number 4063. The machine is suitable for drilling, thread cutting, milling, and other machining processes on large-format workpieces. Equipped with a robust steel frame construction and industrial PC-based control system from Omron. Features: Spindle: 13.1 kW, BT-40 taper, speed approx. 2,000–6,000 rpm. Rapid traverse speed: X and Y axes up to 30 m/min. Travel distances: X = 6,000 mm, Y = 600 mm, Z = 450 mm. Drilling capacity: Ø22–Ø42 mm. Thread cutting up to M30. Table width: 580 mm with T-slots. Electrical: 400 V, 50/60 Hz, 32 A, 3-phase. Control voltage 24 V. Weight approx. 7.2 tons. Includes tool changer with carousel magazine. Pjdpfox N Ncgsx Ah Ueha

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Phsdpfjiit Erox Ah Usa Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 Phsdpfxjxvwcxo Ah Uea X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: new, Year of construction: 2025, functionality: fully functional, CNC machining center NESTING with fully automatic loading and unloading As with all Nesting machines: various sizes, line drilling, Becker vacuum pumps, CadCam Nesting software, CNC controller, remote control, servodrive, etc. The best machine is the one that fits your company. Specify which configuration you require. We guarantee reliability (see the photos) Prices starting from €85,000 – New machines You can call or WhatsApp us for more information and/or to make an appointment. Pjdjxx Uc Uopfx Ah Ujha WhatsApp: We handle transport, customs clearance, and delivery to your location. Machine instruction – extra warranty – 7/24 support

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Psdpfx Aox D Tbmjh Usha Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 100 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 25 m/min, number of spindles: 16, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Numerical Pegasus-Cad software Working area in X - 3050mm Working area in Y - 1220mm 2 working zones Lifting feed table, stackable Automatic loading system, Schmalz type Label printing system with automatic application on the loading table ATC 3-axis vertical electrospindle, 13.2 kW, with automatic tool changer, ISO 30 Automatic tool change system with 16 positions - positioned at the rear of the machine Automatic tool change system, carousel for fast changeovers Automatic unloading system with motorized conveyor belt Automatic worktable cleaning system Protection and safety system with light curtain and fencing Automatic lubrication system Pjdpfx Ajxx T R Doh Usha 250 m3/h - 5.5 kW vacuum pump Contact by phone: 0031634707163 Transport, installation, and user training negotiable Danmar Machines BV Almelo

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Phodpoxxb Rrefx Ah Usa Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), XYZ Proturn SLX425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Pjdpfxjxt Icqj Ah Usha We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78998 Machine Serial Number: L553 Cost: £24,950.00 + VAT

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Pedpfx Ahext Ibyo Usha Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 1340 Trainer Lathe 2 Axis Digital Readout Max. Distance Between Centres 1000mm Max. Swing over Bed 330mm Max. Swing over Gap 495mm Spindle Bore 35mm Spindle Speeds 53 – 2000 rev/min Spindle Motor 3hp Quick Change Tool Post Tailstock MT3 Tailstock Dia’ 40mm Tailstock Travel 110mm Manufactured | 2017 415V Electrics Supplied with: Tool Holders as Pictured Change Gears FOR SALE WITH JET MACHINERY LTD Jet Machinery Stock No: #78011 Machine Serial Number: TBC Cost: £3,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Phsdoxqq H Tepfx Ah Uja